Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction.  Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Similar Messages

  • Automatic Batch Determination during Goods issue of Production Order

    Hi,
    Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
    I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
    Thanks and Regards
    Enrico

    Dear Enrico
    It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
    Configuration Required for your above issue are as follows :
    1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
    2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
    4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
    Create Condition Tables
    Create Access Sequences
    Create Strategy Types
    Batch Search procedure definition
    Batch Search procedure allocation and check activation
    Define Selection classes
    Define sort rules
    Maintain Batch Allocation Strategy Number Ranges
    All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
    5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
    6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
    7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
    Refer the below link for your farther reference :
    http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
    Hope this will be useful
    Regards
    JH
    Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

  • MPN Manufacturer batch determination during goods issue

    I am from pharma industry and my business runs with batch management, MPN features.
    Scenario:
    I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
    But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
    For P2 material we can use R1 batch from manufacturer M2 only.
    For P3 material we can use R1 batch from manufacturer M1 and M2.
    Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
    Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
    Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
    Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
    As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
    But, here we can't maintain any parent child relationship.
    Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
    Through any standard settings we can do or, any exits required?
    Gurus please suggest!

    Dear
    You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
    here you can sort the batches and compare the Batch results with the batch search strategy.
    Regards,
    R.Brahmankar

  • Batch determination During Goods Issue

    Greetings..
                  How to Active batch Determination WHile issuing the goods to Production.
    I created Class and charachteristics. and assigned to materialmaster .
    Now at the time issue i need that  the system should ask the to check the Batch available in Stock with ther Shelf Life..as my charecteristics is shelf Life
    How to do this bathc Determination.
    Please GUide me with the Steps to be caried Out.
    Thanks In advance...
    Edited by: SAP PP on Apr 13, 2009 10:57 AM

    Hi,
    You can activate batch determination on the base of Goods Movement:
    Batch Determination Process
    Purpose
    This process describes how you find suitable batches for a business transaction.Here are some examples of business transactions in different applications:
    Business Transaction Application
    Material withdrawal for production/process order
    Internal material provision
    Return delivery to supplier
    Scrap/sample
    Transfer posting
    To configure this ,please find the details below:
    Prerequisites
    u2022 You must have assigned a search procedure to the business transaction. The search
    procedure contains different strategy types that are relevant for the business transaction.
    u2022 There must be a batch search strategy for one of the strategy types. See also Creating a
    Batch Search Strategy
    u2022 The selection class must contain at least one of the characteristics with which the batch
    was classified.
    Thanks,
    AMIT
    Logistics - General----> Batch Management -
    > Batch Valuation -
    >Valuation for Goods Movement in Inventory Management -
    > Activate Batch Classification for Goods Movements in IM

  • Automatic batch determination during order confirmation

    Dear experts,
    We have defined automatic batch determination using stock determination (OPJ2, for plant/order type, operation 3, check column BD).
    This works fine, only problem is that now both backflushed and non-backflushed materials get batches assigned, but for the non-backflushed we do not want this.
    Does anybody have an idea how to achieve this?
    Edited by: ton teuns on Jun 8, 2011 9:01 AM

    Dear Ton,
    As you have mentioned non-backflushed materials,it means the backflush indicator is not set in the material master or else in
    the work center or in the production order.
    So assuming the indicator is not how are you able to see these components during the order confirmation?
    So first remove the backflush indicator so that it means those components are manually issued and check these threads to
    explore more,
    Automatic batch determination during goods issue
    Regards
    Mangalraj.S

  • Override consignment price  determination during goods issue process

    Hi ALL,
    My requirement is that User is asking want to override consignment price  determination during
    goods issue process. Is there any BADI/User Exit or  Enhancement spot which can override the price value and in the
    database level during Goods issue.
    If yes provide me the enhancement details and where I can implement.
    I will very thankful to you all if I get your valuable input.
    Regards
    Subhasis

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Automatic batch determination during transfer posting. Issue.

    Hi All,
    Please could anyone advise to solve the following problem with automatic batch determination:
    1. When delivery is created for sales order, SAP automatically assigns batch number.(SLOC 1)
    2. From time to time there is a need to transfer the same material number, which is on delivery to another sloc2.
    3. Using Mb1b tcode i do transfer posting from SLOC1 to SLOC 2. In batch field i put * or (**) for automatic generation. (movement 311).
    The problem appears here, when SAP automatically assigns the same batch to transfer posting which was assigned to delivery (p.1).
    So that after transfer posting done, there is no required quantity left in batch needed to do a goods issue for delivery. So goods issue is not possible because of that kind of transfer posting.
    Do you have any idea, how to manage this, and to restrict SAP choosing the same batch which was assigned to delivery.
    Thank you,
    Kind Regards.

    There are 3 strategy types setup in MBC3 (1, 2)
    ME01, ME02 which are standart SAP.
    And one started from Z* with settings below:
    Plnt
    Valid From
    Valid to
    Delet.Ind.
    No. split
    Cpl.change
    OnlineBdet
    UnitofMeas
    MProposal
    Selection
    Sort seq.
    AAAA
    04.01.2006
    31.12.9999
    099
    X
    B
    001
    X
    X
    |
    Date of last goods receipt
    ascending
    Kind Regards,
    Andrey

  • Automatic Batch determination during COGI

    Hi,
    We have implemented the batch determination function at the time of goods issue/ Backflush (at the time of Process order confirmation). Automatically batch is determining at the time of backflush in our scenario. But Automatic batch determination is not happening during COGI when we refresh even though batch/stock is available. But manual batch determination is happening when we select the batch determination tab in COGI. Why Automatic batch determination is not happening in COGI when i select the refresh button.
    Thanks & Regards,
    N. Laxman

    Hi Andreas,
    Thanks for your immediate valuable response.
    In our scenario automatic batch determination will be done during confirmation. If in case for components, stock/batch are not available leads to COGI entries. Then later course will ensure stock should be posted to clear COGI entries. Then in COGI we have to simply refresh for automatic batch determination or we have to manually do the batch determination and post to clear the entries.
    One more thing we would like to now can we run Batch determination in background as a batch job.
    Thanks & Regards,
    N. Laxman

  • Help needed in Automatic Batch determination during Delivery

    Hello gurus..
    Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
    If any can give me the config that goes with it, that'll be great

    Steps to configure Batch Management
    1)  Specify Batch Level
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction  OMCT
    2)  Batch Number - Activate Internal Number Assignment
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction  OMCZ
    3)  Batch Creation - for Goods Movements 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
    4) Characteristic Value Assignment -- Update Standard Characteristics 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
    5) Activate Batch Classification for Goods Movements in Inventory Management 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction  OMCV
    6) Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction  OPLB
    7)  Batch Determination – Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction  V/C7
    8) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction  OPLF
    9) Batch Determination – Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction  V/C2
    10) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction  OPLE
    11) Batch Determination – Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction  V/C1
    12) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM   Search Procedure Transaction  OMCY
    13) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction  OPLG
    14) Batch Determination – Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction  V/C3
    15) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction  OMCG
    16) Batch Determination – Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction  OPL8
    17) Batch Determination – Batch Search Procedure Allocation(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction  V/C5
    18) Batch Determination – Activate Automatic Batch Determination(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction  V/CL
    19) Batch Determination – Batch Selection Class
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction  CL01
    20) Batch Determination – Sort Rule
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction  CU70
    21) Batch Determination – Make Settings for Batch Where-used list
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction  OMBB
    thanks
    G. Lakshmipathi

  • Batch Determination While Goods Issue

    How To Active batch Determination at the time of issue the goods
    I have done following SPRO setting .
    Strategy type --> YB01
    Inventory managment Search Procedure --> YB001
    Allocation IM Search Procedure -->> 261assigned to YB001 along with Active "Check batch"
    In MBC1....for Search Startegy YB01 , for combination of Movement Type/Plant/Material ,materil assignement made as
    material 40100
    No. batch -999
    Changed Allowed : Check
    Uom : B
    Mproposal : Active
    Material Master of raw Material 40100
    Material Master batch Management tick active
    Classifcation view : Class As Shelf life
    Characheirstics :Remaining Shelf Life
    Now i have cretaed prodcution order of 10 qty ..
    I have Four Batches With Differnt Life is available in Stock...
    Now i want to see this Four batch at The time of Issue so that i can select one of the batch for issue..
    Right now i m not getting Batch determination ..
    What else i have to do ...
    Please Guide..

    Dear,
    Have you created the sort rule in ACU70 with LOBM_VFDAT?
    Have you assigned the sort rule in MBC1?
    Also check Implementation Guide for R/3 Customizing (IMG)-- Logistics u2013 General-- Batch Management--Batch Determination and Batch Check -->Batch Search Procedure Allocation and Check ActivationAllocate IM Search Procedure/Activate Check
    Assign for 261 mov type - YB0001.
    Same need to assign in OPL8 also please try and come back.
    Regards,
    R.Brahmankar

  • Automatic batch creation during goods reciept

    hello all,
    we have a 7 plants and one company code,all the plants batch management is active during goods recipt..i.e during goods recipt batch is created automatically by system.
    now ifor one plant i do not want to create batch during goods reciept.
    what are the configuration steps?
    regards
    simran

    Hi
    Deactivate Batch management in Material Master. Remove tick mark for 'Batch management' in 'Purchasing' view of mat master.
    While doing this, you need to ensure that no previous stock is available in the system and also no purchasing document should exists for that material.
    Thanks
    Sachin

  • Outbound delivery output not re-determined during goods issue?

    Hi,
    i'm currently in the process of testing an SAP upgrade from 4.6B to ECC 6.0, and have encountered the following problem: one of our outbound delivery output types (LD00) is supposed to print out at goods issue (which happens in VT02N, by the shipment).
    In 4.6B, the output determination procedure correctly triggers at goods issue, however, in 6.0, it doesn't. Re-opening the delivery in VT02n causes the LD00 to be determined after all, but by then it's too late.
    Does anyone have the slightest idea why the output determination isn't re-evalutated at goods issue?
    regards
    Rob

    Hi,
    Perhaps you are using an own VOFM subroutine to do filters if the output works or no. You create this subroutine with tcode VOFM, and after some steps you create an include in a report of SAP (SAPL). You can check if you are setting a VOFM in SM34/VVC_T683_XX_E1 for the output scheme. Sometimes is necesary to run this report to create and activate the report sapl, if no, when the abap call the subrutine, SAP doesn't find (perform * if found)
    For VOFM there is a good document in google, format PDF, search it with the string inside vofm ext:pdf.
    I hope this helps you
    Regards,
    Eduardo

  • Stock determination during goods issue

    Hi expert,
    our client has one requirement in such a way whem they issue the material , at that time they could see batch wise stock
    and acordingly they could issue the material.
    i have assigned stock determination rule and group to material master as well as in movement type.
    even then this is not triggering.
    Regards,
    Santosh

    follow the link
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/25/283aac4f7811d18a150000e816ae6e/frameset.htm
    navigate in the menu on the left.
    SAP explains here how to setup search strategies

  • Batch creation during goods issue to order

    i had a scenario where  4  production lines are used to produce fg material,in final operation all material produced in different lines are mixed . i am using different grades of raw material( single raw material) in different ratio in each line . during adding raw material in the operation  batch number is recorded .
    in each line 1 ton of material is produced for 1 hour , i had a production order of 100 tons i had to produce 25 batches ( each batch produce 1 ton ) in each line , and each time batch number should be recorded. if raw material from 1st operation enters to 2nd operation in 1st line new batch is again added in 1st operation this process continues un till production order quantity is reached.  how to map this scenario in sap.
    Thanks

    Hari,
    I am not sure if I understood your requirement exactly. But in the first pass did you check WIP batch functionality?
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ff2779-f9d3-2b10-9dab-e9d84c5953c5?overridelayout=t…

  • Trigger automatic batch determination at process order confirmation

    Hello, colleagues.
    I have a requirement for batch determination triggered automatically for all components when I backflush them in CORK/COR6N transaction.
    Batch determination facility has already been set up both for process order and for IM MvT 261. Everything works perfectly.
    There is only one issue: I have to select components and click "Batch determination" button manually for each partial confirmation.
    I want batch determination triggered automatically when I save confirmation.
    Batch determination at the moment of order release is not an option for the current business enviroment.
    I've checked all relevant threads already, but found no solution.
    The solution seem to be found in this thread but no details provided:
    Automatic batch determination during goods issue
    Any help will be highly appreciated.

    There is only one issue: I have to select components and click "Batch determination" button manually for each partial confirmation.
    I want batch determination triggered automatically when I save confirmation.
    Konstantin,
    As far as I know this not possible with any standard configuration.
    Please wait for other experts comments also.
    Br
    KK

Maybe you are looking for