Automatic batch determination (Fifo) in VL02n and WM/foreground

Dear all,
I am trying to set up an automatic batch determination /stock determination strategy on outbound deliveries (FiFo) in a WM managed warehouse.
I have not yet decided whether to go for the batch determination or the stock determination. As all my FERT are batch managed, both should be possible.
I want the determination to happen in foreground in delivery. So everytime I want to pick for a delivery I want to have a list of available storage units/ available stock and to be able to select them manually.
When I read through SAP documentation on stock determination (SPRO activity OSPX/define strategy) it says once WM is involved only background handling is possible.
Does the same restriction also hold for batch determination ? Can I force a selection screen to appear?
If this is not possible: is there a user-exit or Badi (or something similar) which can be used to make the screen appear?
If this is also not possible, how could we make sure that certain customers only receive goods of a certain quality (contained in a batch characteristic)?
Thanks all for your valuable time

you have to decide whether you want do the batch determination in the delivery or in WM transport order.
The batch determination in the delivery is much more powerful. Once you have determined the batches in the delivery, then WM has to pick exact those batches.
if you leave batch determination to WM, then the batch from the TO is written to the delivery when confirming the TO.
if you want do it in foreground in the delivery, then you should not switch on the automatic batch determination, because then the batch determination would be executed twice (first automatic when creating the delivery and again manual when the user wants to do it foreground) and batch determination has certainly impact on the performance.
However, with right values in classification then I do not see any need to do it foreground.

Similar Messages

Exclude customer returns in automatic batch determination

Hi
In my client automatic batch determination process is activated and it works fine.What is happening at this moment, the customer returns with valid SLED is also picked in the fresh picking process, which is not itnerested by some of the customers.
Can we prevent that this returns stock with valid SLED stock is not picked during the new picking deliveris for automatic batch determination process.
batch is activated material level. Condition record VCH3 is maintained in storage location level. Btach determination happens at the delivery item category level.
I think the information is in MSEG table, but I am not sure how to put the block in picking process for customer returned stocks with valid SLEDs. Is there a standard SAP config or we need the enhancements to achieve this?
Regards,

Hi,
Have you tried activating batch status managment and using the standard characteristic LOBM_ZUSTD?
Hope this helps
Regards
Patricio

Automatic batch determination - access sequence and search procedure

Hello all,
I would like to know how will the system automatically start a batch determination for TOs in warehouse.
pl. post any documents related to it.
I would like to know how to activate automatic batch determination in the system for transfer orders in warehouse management. is there any specific t-code or should i make any customizing settings in Batch management.
Also how to create access sequence and how to activate or create search procedure/business procedure while implementing automatic batch determination. is there any specific t-code or should i make any customizing settings in Batch management.
Pl. post any links or config. documents for automatic batch determination.
Thanks,
Maxx

hi
in delivery select the line item click on batch split, then click on batch determination.
you will find strategy analysis icon click on that.
you can analyse your condition type and understand for which combination condition record is maintained and batch got determined.
regards
Gopi Ponnala

Automatic Batch Determination - Class and Classification - SD only

Hi
What Is use of Class and Classification in Automatic Batch Determination ?
Regards.,
Lakshmanan.S
E-Mail id : [email protected]

Hi Lakshmanan.S
please refer to the steps below to implement this functionality:
1. create characteristics to reflect the attributes of your product.
2. create new class(with class type batch) to group those characteris.
3. assign the class to your material master.
4. in IMG, make sure batch determination procedure is properly assigned to sales area and order type.
5. activate the auto. determination for item categoty.
(IMG->LO->batch management..->..in SD->..)
6. as it uses conditon tech. also, make sure your strategy record is maintain.
I just delivered the workshop of this topic in my office today Hope u find this useful.
Best regards,
David Wang

Automatic Batch Determination in Production order

Dear All,
We are using automatic batch determination is based on FIFO (first Mfg first out) for components..After releasing the order.
I have maintained Batch Class in all the materials which are used as a all material special Characteristic LOBM_HSDAT as a one of the class characteristic. as we want batch determination on GR date for few material and for few material LOBM_VFDAT for self life material and its class.
Then create Sort Rule CU70 mainatained the same LOBM_HSDAT in it. and one with LOBM_VFDAT.
Then create Batch serch Strategy (USE T.Code COB1- search strategy CO01the respective sort rule and selection critoria.for All ROH HALB and Finish material.
In Material Master of all component in MRP 2 view select value 3 (Automatic Batch Determination) for BATCH ENTRY. All ROH HALB and Finish material
After mainting above all prerequisite I should able to do the Automatic Batch Determination as per my selection Rule.
But Automatic Batch Determination in Production order after release is not working.
Please need your help.
Regards,
Manish
Edited by: manish gurnule on Dec 30, 2008 5:26 AM

Dear,
Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
On the initial screen of your application choose Batch search strategy -->Create.
Choose the strategy type, say choose co02
Choose the key combination-
Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
Choose Selection criteria push button. Choose a sort sequence.
If no values have been entered, enter the selection class and the characteristic values.
Go back to the screen on which you create a batch search strategy.
Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
Batch management> Batch serach procedure allocation and check activation
T.Code to be looked specifically OMCG , CORC
Hope it will help you.
Regards,
Madhu

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

Automatic Batch determination at Delivery

Hi,
We have multiple batches for a material. Is it possible to determine Automatic batch determination by FIFO at the time of delivery.
e.g a material A has stock 50 Pcs.
                             10 Pcs- Batch A
                              20 Pcs -Batch B
                               20 Pcs - Batch C
Suppose i have sales order for 30 Pcs. Then at time of delivery can system automatically allot batch A and B on FIFO basis. I dont have to select batch for 1o pc

Hello,
Ideally FIFO method is used for batch managed material along with material which have shelf life expiry date check. If you have setup FIFO method for batch determination for stock removal for a combination of your warehouse and storage type, then system will those batch which are oldest. It will check the Goods reciept date for your batch in the respective storage bin and will pick those batches.
Now as in your case, 10 Pcs- Batch A , 20 Pcs -Batch B , 20 Pcs - Batch C, system is bound to take those batch which are oldest , with respect to there goods reciept date.
I hope this helps
BR,
Tushar

Automatic Batch Determination at PGI

Dear All,
My requirement is that i want the automatic batch determination at PGI level. Let me tell you how the system works for me.
MY sales dept will raise the sales order and will create the delivery order. Than stores create the PGI. So basically if we can trigger the batch at VL02N than it would suffice my needs.
I dont think we have any standard setting to accomplish the same.
So can someone please tell me if there is any user exit or some other solution to get this sorted out.
Thanks in advance....

Hi,
Step..Item category in sales order should not check batch automatic
Step: Item category in delivery should have batch activation.
Example...
OR ( Document type) Item Category ...ZM01 ( Not relevant for Batch)
OR NORM ZM01
for delivery ,Need create one more item category like ZM02 with batch activation.we should have maintain the delivery item category determination for other item category ZM02...maintain the batch condition master data
LF NORM Usage (Batch) ZM01 (higher level) ZM02
System will generate two line items .One with ZM01 ,other one ZM02 with batch..

Automatic Batch Determination prior to Picking in outbound delivery

Hi everyone,
My client currently wants to activate automatic batch determination. The main concern is that once the delivery is created, the picking can happen 2-3 weeks after the delivery. So in this case, they do not want batch determination during outbound delivery. They want to run the batch determination prior to Picking process. Is there a standard process to do this?
In addition, for batch determination, if it in an internal customer, it should take LIFO process and if it is external customer then FIFO process. Also if it is STO then it should take LIFO process. Does someone know how to control this
Thanks

Hi
Do it in the SO. In SM30 for V_TVAP_CH, set what the type of items of SO are determined for. For STO, do it for NLN and NLC in the delivery items (SM30/V_TVLP_CH). Check your ATP settings and that during this time (2-3 weeks) the stock for this batch goes on for your customer.
I hope this helps you
Regards
Eduardo

Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Automatic Batch Determination during Goods issue of Production Order

Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
Enrico

Dear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

Automatic Batch Determination for Subcontracting Process(ME2ON)

Dear All,
When we are issuing the components to subcontracting vendor in ME2ON t-code, system is not picking the batch automatically like while creating delivery. In Sales for automatic batch determination they are using item category group but for subcon. order we have only delivery type.
Is SAP will support automatic Batch determination while issue the goods through ME2ON?
If yes kindly revert back.
Thanks &Regards,
Edited by: Priya on Nov 7, 2011 11:40 AM

Hi,
Go to SPRO > Logistics - General > Batch Management > Batch Determination and Batch Check > Batch Search Procedure Allocation and Check Activation > Allocate IM Search Procedure/Activate Check > Here assign Batch Search Procedure "ME0001" to Movement Type 543 O
Then go to MBC1 and maintain condition record for Strategy Type ME02 i.e. Plant and here keep selection method as "O"
In MIGO, click on "Stock Determination" button for automatic batch determination.

Help needed in Automatic Batch determination during Delivery

Hello gurus..
Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
If any can give me the config that goes with it, that'll be great

Steps to configure Batch Management
1) Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
2) Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
3) Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
4) Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
5) Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
6) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
7) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
8) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
9) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
10) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
11) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
12) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
13) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
14) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
15) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
16) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
17) Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
18) Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
19) Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
20) Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
21) Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
thanks
G. Lakshmipathi

Batch Determination Restriction in VL02N

Dear Expert,
How can i restrict the batch determination option in VL02N. Is there any object which can be used to block the said activity for certain users or disable the option of batch determination.
Regards.
Edited by: Govinder Singh on Oct 20, 2009 3:00 PM

Hello,
Check with objects C_TCLA_BKA and C_TCLS_MNT
You can trace using ST01 and find respective objects.
Regards,
Gowrinadh

Automatic Batch Determination is not happening for New Sales Order Type

Dear Experts,
I have created a new sales order type ZBPY - For Free Sales, but automatic batch detrmination and batch pick up is not happening for new sales order type, but it is activated for all the other sales order types in Production Server, can any body let me know the steps how to map this new order type to batch management and let it behave like other order types.
Thanks in Advance.
Saravanan(EKS).

Hi Saravanan,
Kindly check the following steps for automatic batch determination.
1. First check the material is maintained with batch in the warehouse management.
2. Maintain new entry for search procedure for batch determination with the new created doc type.
3. Maintain new entry for automatic batch determination for sales order or automatic batch determination for delivery ( This depends on the business process of our client, whether they want to determine the batch with sales order or at the delivery level. check this and make new entry)
4. Create Batch using T.code MSC1N with proper date of manuf. and SLED.
5. Create Batch Search Strategy using T.code VCH1 with proper strategy type.
6. Maintain stock with active batch. check this with t.code LS26 or LS24.
regards
Ravishankar M

Automatic batch determination (Fifo) in VL02n and WM/foreground

Similar Messages

Maybe you are looking for