Automatic batch determination problem - Unable to view available batches
Hi,
I have a issue related to batch determination in process order, Here is my data set up:
I am trying to to perform batch determination for process order. I see i have batches available in stock.
And my selection criteria is below:
LOBM_RLZ ( Remaining shelf life for batches) - 3d
LOBM_LFDAT (Batch determin. delivery date) - 02.02.2010 ( mm/dd/yyy format)
LOBM_VFDAT ( Expiration date, shelf life) - 05.02.2010
Batch classification view in MSC3N shows following data:
Date of last goods receipt - 27.01.2010
Expiration date, shelf life - 22.01.2011
Status shows 'Released'
Batch serch strategy is maintained in COB1 for order type, plant, and material. Please find the data maintained in COB1
Date of last goods receipt - BLANK ( No value maintained)
Remaining shelf life for batch - 3D
Expiration date, shelf life - BLANK ( No value maintained)
Please suggest me why i am unable to determine batches in process order. Any inputs whould be of great help. - Many thanks!
Regards
Seshu
Edited by: Amarendra Seshu on Feb 2, 2010 1:45 AM
Hi Seshu
First Try with different selection criteria, ie., with out giving any dates. Mismatching of dates could be the problem.
Secondly check the valid from & Valid to date in COB1.
Regards
Bala
Similar Messages
-
Automatic batch determination problem in STO- Replenishment delivery
Hi all,
After doing the Stock transport order, in replenishment delievry batches are not getting determined auomatically. I've done all the required settings for automatci batch determination incuing itemcategory determination everything, but then automatic determination is not happening. Please advise.Goto the Batch Split screen ---> Batch Determination
Check the following:
1) Strategy Analysis - Make sure your batch condition record is being pickedup.
2) Strategy Info - make sure 'selection defined' is checked up. No of batch split should be 999.
3) Selection criteria should pick up the characterstic you have defined for batch determination. -
Hi dudes,
i have made all settings that necessary for batch determination for components in process order, from condtion table to search strategy(COB1), but when i am doing BD for componets in process order, the sorting rule and selection class is not picking as procedure automatically. If i select startegy Info and select the same then BD is working fine.
Can you give idea the where any setting is missing?
thanks in advance.
RobertHi,
I have made all settings that necessary for batch determination for components in process order
Will you share which settings you have made so far?
Have you maintain Batch Determination Procedure in your Order Type dependnent paramter (T.code COR4).Also for auto batch determination you have to maintain batch entry 3 in material master for all batch managed BOM components.
Regards
Dhaval -
Process Order -Batch determination for a BOM material(same batch)
Hi Friends,
Thanks in advance.
Let us say, a material (ROH) has so many batches as A,B,C & D. Whenever we create a new process order, system has to pick only the particular batch( say -C here) in the process order BOM through batch determination. (during process order creation stage)
1.How to achieve the same ?
2. What are the ways are there to achieve the same ?
3.Is there any Exit for this?
Regards,
ManiHi Velmurugan & Vishwas,
Thnaks for your feed back.
1. Is there any other ways without batch classification ? ( Because there are so many material without MM-classification view.....and client wants without extending the Classification view for MM master as it suggests same batch for all GI for delivery & GR for purchase.....)...We want only for process order batch determination.....
2. Is there any exit for this ?
3. Is it possible through any kind of Characteristic assignment in the Sort sequence? How?
Regards,
Mani -
Batch determination in order doesnt branch into batch selection screen
HI Friends ,
I am doing manual batch determination in the sales order . My intention is to select specific batches if the system branches into batch selection screen . But the order wouldn't branch into that screen but directly the batch field is filled with the batch . Also system is giving message ' number of batch splits is limited to 001" . There are more than one batch in availability .
Could somebody tell me why it wouldn't allow me to select batches eventhough it is manual batch determination ?
Regards
RaghavHi,
In logistict genral>>>Batch mgt.>>>B. dtermination & check>>>Strategy type>>>Define SD strstegy types.
Select which type u r using , go to details speciefy u r batch spliting number or make it blank,also tick mark to changes allowed
Regards,
Kapil -
Automatic Bin Determination Problem
Dear Experts
Hope all of you doing well.
I am Facing Problem with T.Code LT04 ( Below are the Senario)
At the time of Post LT04 Transaction system not picking Source Storage Bin Automatically
"Error Message : System cannot find source Storage Bin"
Material Master Maintained with Storage Bin
And at Intial screen of LT04 there is not option for F4 ( in storage Bin coloum )
For that reason user every time has to put Storage Bin No Manually
Is there are any option available in customization that system automatically detremined Storage bin
Please help me in this regards
With Best Regards
SumanSo, You should also have maintained fixed bin in WM2 view.
Now, check whether RK1 has Storage section check active? If yes, what is the section given in search OMLZ?
check whether same section is given in that fixed bin. Now only concentrate on your fixed bin. forget about other 50 bins.
Hi
Thanks for your Reply
Yes fixed bin has been maintained in MW2 View
Storage section check is not active for RK1
( If I want to make it ticked ( Storage section check active) now system give the error message like " If you have st.pl.str. "Fixed bin", the area check must not be active" )
In OMLY transaction under its maintained as under
CWH RK1 001 0 F01 S01 T01
CWH RK1 002 0 T01 S01 F01
CWH RK1 F01 0 F01 S01 T01
CWH RK1 S01 0 F01 S01 T01
CWH RK1 T01 0 T01 S01 F01
( WHNO-CWH , STOG.TY-RK1 , FAST MOVING - 001 , F01-Rack Fast-moving for CWH , S01-Rack Slow-moving for CWH , T01-Rack Total Sec for CWH
Please suggest
Regards
Suman -
Batch determination Problem in process orders
Dear Friends,
i am getting problem of BD for components in process order that the FIFO sequence is not
showing.
!. I have made settings like Strategy Plant/order type
2. Charecteristic in the class and sort rule LOBM_VFDAT
3. Class assigned to materials.
4. raw materials batches have maintained Ex.date, date of produced(at the time of GR by 561)
5. Order type i have assined search Proc.
in the order strategy info showing sort rule correctly in theprocess order, But the sequence it showing
is neither with GRn date or not with Exp date.
kindly guess what might be the problem...
Regards
RobertDear,
For FIFO you can use the Characteristic LOBM_LFDAT for FIFO if is LOBM_VFDAT then in plant storage data 1 view maintain the SELD then assign these Characteristic to class in CL02 then assign this calss to material master.
Then craete sort rule in CU70 withCharacteristic LOBM_LFDAT or LOBM_VFDAT
then assign it to serch strategy in MBC1 or COB1 with selction criatoria.
In OPL8 assign this serch procedure.
Then create the order and check the result.
Regards,
R.Brahmankar -
Auto batch determination problem
Sir i had customized tcode MIGO such that it is taking batch no. automatically, but in tcode SNUM i have default no. range as 0000000001 to 999999999 and i want it in format SR-I-0001 for raw material and SP-I-0001 for packing material .So how to set this automatic alfanumeric value.
I am online.HI ,
Please take the help of technical team .
Thanks
Ram -
Problem: unable to view recordset in browser.
I have an ASP page and when testing the recordset, a record is returned. (except for one record within the row which is a text value/format).
But when viewing in the browser only table headings are shown and no records are displayed.
process; user logs in and is directed to results page.
(current recordset is a simplified version of what i want for testing purposes)
Gratuity Status and Remarks are not included at the moment in the recordset i have testing.Have you deleted the browser history and cookies?
Are you checking this on a testing server? If so, make sure the connection to the database is established properly.
Check on other browsers... -
Automatic Batch determination while creating outbound delivery
Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
UtsDear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts -
Automatic Batch Determination during Goods issue of Production Order
Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
EnricoDear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM -
Manual or automatic batch determination in process order
Hi, how to know for particular process order, whether we should do manual batch determination or automatci batch determination for components without viewing the material master?
Dear Sir,
Used MSC2N, if it allows the cahnge in the no, then it is mannualy cfreate or else it is being created automatically
Regards
Bhupendra Singh -
Automatic batch determination during goods issue
Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. LaxmanDear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S -
Problem in batch determination with Transfer Order
Hello,
I want to use SLED batch determination to supply my shop floor from my central warehouse.
I activate the SLED batch determination procedure for WM and I create the search strategy for movement code 319.
When I convert my transfer requirement in transfer order the batch proposed is the first batch number while it's not the first expired.
In my TO if I choose to display the Batch determination, the list is well sort by expired date, and so the first batch of the list is the first expired. So why it is not this batch that is proposed in the batch field of my order ?
Thanks for your help.
Laurent.Hello,
thanks for your answers.
I confirm that the removal strategy is H for the storage type 200 (the warehouse where the component come from).
The search strategy seems to be well maintened because when I display the Batch determination in my TO (Environement/Display Batch det.) , I obtained the list of batch sort by expired date. But in the field batch it still the first batch number that is proposed.
What do you mean by "(i.e. storage type, section are choosen according to Whse & Material master indicator and bins do exist)" ?
Laurent. -
Batch determination at material level.
Hello SAPians,
I have a question about the batch management at material level.
i have maintained batch determination policy at material level in system conversions also get done... now my problem is here ,i want to reassing it to plant level.. please help me in this becoz system is not supporting me as it showing the error that this implementation is not yet done in system...
even i tick the batch determination in MM03 purchase view it is not allowing me ... and one more i did this in development server but it is assigned to all means dev, qlity as well to production servers...
which field i forgot to maintain please clarify me..
Waiting for the response.
Regards,
Ninad Kshirsagarhello Gurus,
Can any body Download OSS note 41715 for me from Marketplace as i dont have access so please.
regards,
ninad
Maybe you are looking for
-
Trouble installing cc lightroom over trial version
I downloaded lightroom5 trial version on my MacPro desktop. works great. then I purchased a complete Creative Cloud license.II I installed everything on my laptop no problems and did not have any trial versions on it. I installed everything on my d
-
IDVD crashes during dvd creation, disappears, prompts to relaunch
I have tried different themes, I have tried making it simpler. I was down to a single 2 minute video and a slideshow. No complex menus. I have looked at the other posts, and there is no answer to correcting this problem that I could find. I have the
-
How to re-install my adobe CC again?
Yesterday I had a problem with my computer. It would noT open and windows made a verification of the problem but it uninstalled my Adobe InDesign CC, Photoshop and Illustrator. I went on the cloud to reinstall them but it looks like I can't. I have a
-
Airplay Mirroring vs From Photos App
When you use Airplay mirroring to AppleTV and play videos on your photos app, they play instantly with no loss of quality or framerate. When you try to just hit the airplay icon in the camera roll when not mirroring, it takes forever for the video t
-
CF8 Code Completion problem on Vista
Here's this issue. Work Box: Running XP Pro, CF8 & DW8: New tags for CF8 (i.e. cflayout, etc...) are showing up fine in the code completion list menus when coding. Laptop: Running Vista Home Premium, CF8, DW CS3. CF8 installed and runs just fine but