Automatic Bin Determination Problem

Dear Experts
Hope all of you doing well.
I am Facing Problem with T.Code LT04 ( Below are the Senario)
At the time of Post LT04 Transaction system not picking Source Storage Bin Automatically
"Error Message : System cannot find source Storage Bin"
Material Master Maintained with Storage Bin
And at Intial screen of LT04 there is not option for F4 ( in storage Bin coloum )
For that reason user every time has to put Storage Bin No Manually
Is there are any option available in customization that system automatically detremined Storage bin
Please help me in this regards
With Best Regards
Suman

So, You should also have maintained fixed bin in WM2 view.
Now, check whether RK1 has Storage section check active? If yes, what is the section given in search OMLZ?
check whether same section is given in that fixed bin. Now only concentrate on your fixed bin. forget about other 50 bins.
Hi
Thanks for your Reply
Yes fixed bin has been maintained in MW2 View
Storage section check is not active for RK1
( If I want to make it ticked ( Storage section check active) now system give the error message like " If you have st.pl.str. "Fixed bin", the area check must not be active" )
In OMLY transaction under its maintained as under
CWH     RK1     001          0     F01     S01     T01
CWH     RK1     002          0     T01     S01     F01
CWH     RK1     F01          0     F01     S01     T01
CWH     RK1     S01          0     F01     S01     T01
CWH     RK1     T01          0     T01     S01     F01
( WHNO-CWH , STOG.TY-RK1 , FAST MOVING - 001 , F01-Rack Fast-moving for CWH , S01-Rack Slow-moving for CWH , T01-Rack Total Sec for CWH
Please suggest
Regards
Suman

Similar Messages

Automatic batch determination problem - Unable to view available batches

Hi,
I have a issue related to batch determination in process order, Here is my data set up:
I am trying to to perform batch determination for process order. I see i have batches available in stock.
And my selection criteria is below:
LOBM_RLZ ( Remaining shelf life for batches) - 3d
LOBM_LFDAT (Batch determin. delivery date) - 02.02.2010 ( mm/dd/yyy format)
LOBM_VFDAT ( Expiration date, shelf life) - 05.02.2010
Batch classification view in MSC3N shows following data:
Date of last goods receipt - 27.01.2010
Expiration date, shelf life - 22.01.2011
Status shows 'Released'
Batch serch strategy is maintained in COB1 for order type, plant, and material. Please find the data maintained in COB1
Date of last goods receipt - BLANK ( No value maintained)
Remaining shelf life for batch - 3D
Expiration date, shelf life - BLANK ( No value maintained)
Please suggest me why i am unable to determine batches in process order. Any inputs whould be of great help. - Many thanks!
Regards
Seshu
Edited by: Amarendra Seshu on Feb 2, 2010 1:45 AM

Hi Seshu
First Try with different selection criteria, ie., with out giving any dates. Mismatching of dates could be the problem.
Secondly check the valid from & Valid to date in COB1.
Regards
Bala

Automatic batch determination problem in STO- Replenishment delivery

Hi all,
After doing the Stock transport order, in replenishment delievry batches are not getting determined auomatically. I've done all the required settings for automatci batch determination incuing itemcategory determination everything, but then automatic determination is not happening. Please advise.

Goto the Batch Split screen ---> Batch Determination
Check the following:
1) Strategy Analysis - Make sure your batch condition record is being pickedup.
2) Strategy Info - make sure 'selection defined' is checked up. No of batch split should be 999.
3) Selection criteria should pick up the characterstic you have defined for batch determination.

Bin determination in automatic TO creation for posting changes

Hello guys,
could someone provide some information or some links on how the automatic bin determination for posting changes will be processed in SAP WM?
Actually I'm looking for some further information for automated processing during a posting with movement type 309.
What data from the posting change will be taken into account for the automated bin determination?
Or is it 100 % comparable to the standard putaway / stock removal strategies?
Thanks for some hints on that.

Hi,
I would like to add a point here that there is possibility of transmitting a screen widow to hav the value of GR number. You can do the settings in OMLR in the AddlData for the appropriate Mvt (eg 321)
This will cause to have the GR number to the PCN, which is compared with the GR no in the quant existing, while creating the TO wrt PCN.
For eg: Material           Qty              Stk catgry                Bin                      GRno
                 A                  20                    Q                      B001                  5000000102
                 A                  40                    Q                      B003                  5000000140
Now, when transfering the stock category form Quality to unrestricted, for 20 qty, a PCN will be created bforethat a pop-up screen flows in which u'll b giving the GR no as 5000000140.
So u have the PCN for Qty 20, with GR no 5000000140.
When u create a TO wrt PCN, system will pick the stock from the bin B003.
I don't know how far this may light u.
Reg
Prasanna

Problem in automatic batch determination for components in process order

hi
Ours is a process order industry. Here we prepare food items.
We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
The batch procedure picked is me0001 for 261 movement type instead of C00001.
Because of that we need to enter batch manually.
Send us the procedure to automatic batch determination for components.
regards
ravi

Ravi,
Before posting please do search in this forum because this topic has been discussed many times in past.
Please check below links which could be helpful to you Automatic batch determination in process order
http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
If you still have issues then please come back.
Br
KK

Automatic batch determination when more items have the same material

Hi guys,
I have a problem with automatic batch determination in the delivery note where more items has the same material number.
For example:
Sales order items
Item   Material   Q
1        130         5 kg
2        130         4 kg
Stock for this storage location is:
material    batch    Q
130           1000     3kg
130           1001     7kg
When I create delivery note I get this:
Item   Material   Q   Batch
1       130
90001 130       3     1000
90002 130       2     1001
2       130
90003 130       3     1000
30004 130       1     1001
As you can see, both items has the same batches. This is not good, when post goods issue. Normally there is no stock availaible for both items.
Is there any customizing to do this correctlly?
Thanks for an ansver.
BR, Matic

What is the purpose of giving the same material as second line item.
specify in the first line item itself.
or els the condition record which you have specified that for 100 material of A gives 10 material of B modify it to 10 of A should give 1 material of B
The first you will be useful for you.

Automatic Batch determination while creating outbound delivery

Hi,
I have already performed following steps, but still i am facing problem for Automatic Batch determination while creating outbound delivery :
1.CT01- Creation of Characteristics. ( Define Selection Class )
2.CL01- change. ( Define Selection Class )
Add Characteristics in u2018CHARu2019 tab And save .
3.CU70 u2013 create u2018Sorting Sequenceu2019 and assign characteristics
4.Batch Search Procedure & Strategy type
V/C3 u2013 Batch Search Procedure and assign the strategy types
a.To create condition type T. code V/C1
b.To create access sequance T. code V/C2
5.V/C5 - Allocate SD Search Procedure/Activate Check u2013 assign sales organization , order type into Batch search procedure.
6.V/CL - Activate Automatic Batch Determination in SD - Activate automatic batch det. for delivery item categories u2013 select item category and activate auto batch determination
7. VCH1 u2013 Create batch search strategy against strategy type as per the access sequence needed.
Please let me know is there any other step, apart from it.
Tx
Uts

Dear saravanan,
Re :Check from ur material master view ' Sales: General/Plant Data' that availability check should be 02 and batch management should get activated .
Done!
Re: check CT01 - addnl data table name and field name maintained ( which field to be taken for batch determination )
Done!
Re:check CL01 - char - is maintained with CT01 char
Done!
Re: check from v/c1 'Sort sequence' and Qty proposal 1 are maintained correctly.
Done!
Still i am not able to get batch automatically...
Is there any LIFO or FIFO settings i have to maintain in Material master.
Pl guide.
Tx
Uts

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

Shift planning - automatic proposal determination

Hi Experts
There are two shifts in our system, named A and B, and A' daily work schedule is from 8 AM to 5 PM and B's is from 8 PM to 5 AM. there is no overlap between these two shifts. Now two persons with the same job and qualification work for these two shifts. On a specific day, person 1 plans to work for shift A and person 2 plans to work for shift B in planned time working schedule(infotype 0007). Then I want to exchange thess two persons' shifts in PP61 using automatic proposal determination by returning different priority: for shift A, raise person 2's priority and for shift B, raise person 1's priority.
Now I encounter problem in finishing this: when determining shift A's candidate, person 2 can not be selected although he has the same job and qualification with person 1, and the reason is there is no overlap between shift A's working time and person 2's planned working time(0007) . How can I make person 2 selected even there is no overlap between the shift working time and planned working time?
could any expert help me out?
Thanks a lot!
shaoming

Hi Shaoming -
We are facing similar issue now in our implementation.
Can you please let us know in case your issue was resolved.
Thanks,
Sanjay

Automatic batch determination for quality inspection stock

Hello, gurus.
Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check CH and Checking Rule for Availability Check 03 where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
Why it is not possible to do automatic batch determination for quality inspection stock then?

OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

Automatic Batch determination at Delivery

Hi,
We have multiple batches for a material. Is it possible to determine Automatic batch determination by FIFO at the time of delivery.
e.g a material A has stock 50 Pcs.
                             10 Pcs- Batch A
                              20 Pcs -Batch B
                               20 Pcs - Batch C
Suppose i have sales order for 30 Pcs. Then at time of delivery can system automatically allot batch A and B on FIFO basis. I dont have to select batch for 1o pc

Hello,
Ideally FIFO method is used for batch managed material along with material which have shelf life expiry date check. If you have setup FIFO method for batch determination for stock removal for a combination of your warehouse and storage type, then system will those batch which are oldest. It will check the Goods reciept date for your batch in the respective storage bin and will pick those batches.
Now as in your case, 10 Pcs- Batch A , 20 Pcs -Batch B , 20 Pcs - Batch C, system is bound to take those batch which are oldest , with respect to there goods reciept date.
I hope this helps
BR,
Tushar

Automatic Batch determination for Replenishment delivery

Hi there,
Is there a way to determine batch automatically for replenishment delivery?
Whenever I create replenishment delivery, batch should be determined automatically. For that I activated automatic batch determination for SD documents (Delivery Item Category NLN)...
Still I couldn't solve my problem...
Suggestions from everyone are most welcome...
Regards,
Geetha

Hello Geetha,
You need to carry out configuration for seach procedure under SPRO-> Log Gen -> Batch management -> Batch search procedure definition -> Define Sales and Distribution Search Procedure
The help text from that node is as follow:
Define Sales and Distribution Search Procedure
     In this step, you define search procedures for batch determination in Sales and Distribution.
     Each search procedure comprises all strategy types that can be used for a particular combination of sales area and sales document type.
     Requirements
     To be able to define search procedures, you must have defined the necessary strategy types.
     Standard settings
     The standard SAP R/3 System contains search procedure SD0001.
     Activities
     To create a search procedure, proceed as follows:
     1. Select New entries, and enter a six digit key beginning with "Z" as well as a name for the search procedure.
     2. Select Control and then New entries, and enter the strategy types in the desired sequence.

Automatic Batch Determination - Mass Item setup

I have just successfully setup Automatic batch determination in SD after much testing and am ready to transport relevant changes made to the live system.
However, when that is in place the department concerned will need to update over 200 items for this batch control. So far, for testing I have updated 4 or 5 items via VCH1/VCH2 and I am now dreading the thought of having to go through every item via VCH1 to implement this fully. Is there a mass setup option I (or the users) can use to get them done?
Thanks
Jim Jackson

Hi Siddarth,
Re the Batch Determination itself, it works as required for the 4 or 5 items used in the test process. However, on following your instructions to check the Analysis of the batch splits the 4th level i.e. condition type gives the message VE896 "The condition record for use H can not be displayed". This message appears to have confused a few people judging by the queries on various websites and all without a final answer as well. What does it mean and what are the implications of it as all appears to be OK with the batch splits as far as I can see (and the users doing the testing are very happy with the results so far).
The main problem I have is when we go live and have to update all of the relevant items on the live system. As mentioned, the test items were added manually via VCH1 to be part of the Batch determination process. On the live system, do we have to add each item manually to teh strategy in VCH1 to make it part of the batch process ? We have over 200 that will need to be handled via batch management and getting this done quickly and effectively could be a problem. Should the fact that V/CA has the relevant Item Category ticked solve this problem?
Regards
Jim

Automatic batch determination during order confirmation

Dear experts,
We have defined automatic batch determination using stock determination (OPJ2, for plant/order type, operation 3, check column BD).
This works fine, only problem is that now both backflushed and non-backflushed materials get batches assigned, but for the non-backflushed we do not want this.
Does anybody have an idea how to achieve this?
Edited by: ton teuns on Jun 8, 2011 9:01 AM

Dear Ton,
As you have mentioned non-backflushed materials,it means the backflush indicator is not set in the material master or else in
the work center or in the production order.
So assuming the indicator is not how are you able to see these components during the order confirmation?
So first remove the backflush indicator so that it means those components are manually issued and check these threads to
explore more,
Automatic batch determination during goods issue
Regards
Mangalraj.S

Automatic batch determination during transfer posting. Issue.

Hi All,
Please could anyone advise to solve the following problem with automatic batch determination:
1. When delivery is created for sales order, SAP automatically assigns batch number.(SLOC 1)
2. From time to time there is a need to transfer the same material number, which is on delivery to another sloc2.
3. Using Mb1b tcode i do transfer posting from SLOC1 to SLOC 2. In batch field i put * or (**) for automatic generation. (movement 311).
The problem appears here, when SAP automatically assigns the same batch to transfer posting which was assigned to delivery (p.1).
So that after transfer posting done, there is no required quantity left in batch needed to do a goods issue for delivery. So goods issue is not possible because of that kind of transfer posting.
Do you have any idea, how to manage this, and to restrict SAP choosing the same batch which was assigned to delivery.
Thank you,
Kind Regards.

There are 3 strategy types setup in MBC3 (1, 2)
ME01, ME02 which are standart SAP.
And one started from Z* with settings below:
Plnt
Valid From
Valid to
Delet.Ind.
No. split
Cpl.change
OnlineBdet
UnitofMeas
MProposal
Selection
Sort seq.
AAAA
04.01.2006
31.12.9999
099
X
B
001
X
X
|
Date of last goods receipt
ascending
Kind Regards,
Andrey

Automatic Bin Determination Problem

Similar Messages

Maybe you are looking for