Automatic CC no longer working

A while back I put in a code through Terminal so that Mail automatically CCs any outgoing email to a specific email address. Recently emails have been randomly returning as "Mail Delivery Failure" from that specified email address.
Any help on why this stopped working?
Is there a command to stop it and then I can start eh automatic CC?
Thanks for the help

btt

Similar Messages

Automatic shutdown no longer works as before

Since installing Mountain Lion the shutdown at a specific time seems to only work when the computer is awak. With Lion my computer would shutdown at 10 pm everyday and start back up at 4pm when I returned from work all ready for me. But with Mountaion Lion it never does this. Testing this reviles that it only works if the computer is awake. So I wil have to make sure my computer never goes to sleep (where's the engery savings in that?) or no longer use the automatic shut down feature and just shut it down when I'm finished like I had to do in the 90's with Windows. I'm really hoping this is not the new way for this teature to work and that it was only an oversite and wasn't found during QA (you do have a QA department doen't you?). Please return this to it's previous working order. Leaving my computer awake for hours just so it can shut down automatically makes no sense.

Hello:
I suggest you put the Mac to sleep and never shut it down (unless you are going to be away for several days). A Mac (when sleeping) consumes a minimal amount of energy. IMHO (not a scientific analysis) electronics fail sooner when repetitively turned off and on.
Barry

Automatic brightness no longer works with mountain lion

I have a mid-2010 13" MBP that I upgraded to Mountain Lion via a clean install. Since the upgrade, the automatic brightness feature has stopped working and the laptop's screen brightness no longer responds to changes in ambient light level.
I've also noticed that I cannot deselect "automatically adjust brightness" in System Preferences – although I can clear the checkbox, as soon as I leave Display Preferences and go back, the box is rechecked. Adjusting the brightness using the slider or F1/F2 works as expected.
So far, I've tried resetting the SMC and PRAM, and using several combinations of energy and display settings, but no luck.
Is anyone else having this issue? Any ideas how I might solve it? Thanks.

Apparently I have the same issue! Also I am unable to change the brightness settings for the keyboard backlight. (see my post about that here) Unfortunately I have yet to find a solution to the problem. I'm currently re-downloading the Mountain Lion install, hopefully a re-install will correct the issue. I'll let you know if I find anything.

Automatic Sleep no longer working on my Mac Mini :(

I just noticed my Mac Mini is no more going to auto-sleep as it should.
What can I try?
Resetting both SMC and P/VRAM did not solve the issue. I've also cleaned all system and program caches, plus repaired permissions.
I've searched the forums, and found quite a lot of topics about similar issues. Most were actually about notebooks. A lot of 'go there and delete this' solutions popped out, but I feel insecure to trash entire system folders.
Anyone can provide me with a safe & complete list of what I have to delete please?

really? sorry about that.
I guess that forum is restricted for people with at least two stars.
Here is a repost of that link.
My Mac pro doesn't auto-sleep. I've done an extensive search for possible solutions on apple support and elsewhere but nothing seems to cure it.
I made a little sleep program of my own which I'd like to recommend to anyone with the same problem. It's a very simple shell script that checks system idle time and if it's bigger than the sleep timer you set in system preferences it puts your computer to sleep. It will work so long as you can manually put your computer to sleep from the apple menu.
You'll also need to create a launch daemon to periodically run the script.
here are the steps to do it.
1. copy and paste the following into TextEdit.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
#!/bin/bash
idl=$"`ioreg -c IOHIDSystem | awk '/HIDIdleTime/ {print int($NF/1000000000); exit}'`"
sleeptimer=$"`defaults read /Library/Preferences/SystemConfiguration/com.apple.PowerManagement "Custom Profile" | grep "System Sleep Timer" | awk '{print $5}' | sed -e 's/;//g'`"
st=`expr $sleeptimer \* 60`
if [ $idl -gt $st ]; then
shutdown -s now
fi
</pre>
2. Format it as *plain text* (shiftcommandT in TextEdit) and save it as sleep.sh (don't use the .txt extension) at the top level of your hard drive. (You can save it elsewhere of course but make sure it's accessible to every user and change the path to the script in the commands below).
3. make it unix executable by entering the following command in terminal.
*chmod 755 /sleep.sh*
4. Download and install Lingon .
5. Open Lingon and create a new Users Daemon
Call it,say, com.sleep.launchd (the name is not important)
On line 2. enter /sleep.sh
and in section 3 set it to run every 30 seconds (that can be varied).
Click save (you'll have to enter your admin password).
6. Restart.
That's it. Once this is done you can forget about it. The sleep settings are still controlled from system preferences. The sleep agent will work with every user and even over the login window.
To uninstall it, open Lingon , select the launch daemon you made and uncheck the box "Enabled" in the upper right corner. save and restart.

All my automatic logins no longer work

There are various sites where I have always been 'permanently' online - i.e. I never have to login, and each time I activate a link to that site, I'm there. For example, Twitter, Amazon, various hobby or discussion forums, etc.
The last two or three days, this has all changed - clicking a stored link takes me either to the page I expect to be (but in a 'not logged in' state), or to the site's default login screen. In other words, I have to login EVERYWHERE! (Yes, I always have to re-login to these Apple Discussions after closing the window, but that's always been the case, and I'm not including that in this problem).
Gradually I am using Autofill (Passwords) to provide me with a one-click solution to this, but better still would be not having to login at all, i.e. revert to my permanently logged in status for those sites where it has always been true.
I have in the past Reset Safari.., but these days I only choose to Clear Cache and Cookies. Neither of these have ever affected whether automatic logins work, so that's not the cause of this problem.
Any idea why this has happened? What can I do to cure it?

Hi,
Quit Safari.
Open Keychain Access (Applications/Utilities) Select Passwords on the left.
Delete all the keychains for the sites you mentioned.
Relaunch Safari. From the menu bar click Safari / Preferences then select the Autofill tab. Make sure *User names and passwords* is selected.
Navigate to a site. Type in your user name and password. You will be prompted to save that data to a new keychain. Next time you re visit that site, it should "autofill" for you.
If that didn't help, open a Finder window. Select your Home folder in the Sidebar on the left. Open the Library folder then the Preferences folder.
Move the com.apple.keychainaccess.plist file to the Trash. Restart your Mac. Launch Safari and try logging in to a site again.
Carolyn
Message was edited by: Carolyn

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

Settings > Store > Sign Out.
Sign in with the correct ID.

10.5.7: Automatic Software Update Feature No Longer Works

Ever since I installed 10.5.7 the automatic Software Update feature no longer works. (Manual updates work fine.) For example, here's what happened today with Safari 4.0.2:
1. After powering up I got the Software Update icon on the Dock.
2. I clicked it and it said I had updates that would require a reboot and it asked the usual stuff. (It didn't say what would update.)
3. I clicked to reboot now and it asked for my password and rebooted.
4. My MacBook rebooted but nothing had been updated.
So, I went to the Apple menu to check for updates and it said I had Safari 4.0.2 ready to be installed. This time, it worked. Unfortunately, I have to do this two-step process on every update that requires a reboot. I could turn off the automatic updates and just do everything manually but I prefer the automatic way. (I had it before, too.)
Thanks in adavance,
Brian

Jeffery,
Thank you for your quick response!
{quote:title=Jeffrey Lee wrote:}
How often do you have SU to check for updates? And do you have "Download important updates automatically" checked as well?{quote}
I have check for updates weekly and download important updates automatically enabled.
{quote}I'm thinking that the first time you approved the update, that it could have been for something that was already downloaded in the background, and just waiting for you to OK the install.
Then when you rebooted, and did the manual check, it found that the Safari update was available as well.{quote}
Interesting. I hadn't thought about that. ☺
{quote}There could be a host of other issues... but check the "installed updates" in the SU preferences, and see what, if anything, was installed right before the last Safari update... note the date and times and see if my theory might be correct.{quote}
Here's what it shows for the last month:
{quote}2009-06-11 00:03:05 -0700: Installed "Digital Camera Raw Compatibility Update" (2.6)
2009-06-11 00:03:10 -0700: Installed "iLife Support" (9.0.3)
2009-06-11 00:03:25 -0700: Installed "iDVD Update" (7.0.4)
2009-06-11 00:04:21 -0700: Installed "Safari" (4.0)
2009-06-17 00:03:28 -0700: Installed "Java for Mac OS X 10.5 Update 4" (1.0)
2009-06-17 23:30:01 -0700: Installed "Safari" (4.0.1)
2009-06-24 23:34:18 -0700: Installed "HP Printer Drivers Update" (1.1.1)
2009-07-09 18:38:49 -0700: Installed "Safari" (4.0.2){quote}
Also, I don't think it matters but I did upgrade VLC to 1.0 the previous day.
Thanks,
Brian

Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically, Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically

Facebook no longer works correctly on my iPad. If a post has a video attached, safari automatically brings up the video. I have deleted the app facebook and re-added. Still having the issue.

It appears to be a bug with (I assume) Facebook's servers - other people are having the same problem, me included, with the app switching into YouTube in Safari and showing the last video that was posted on the wall. Until Facebook (if it is their bug) fix it, then there is not much that you can do, apart from possibly accessing Facebook via Safari on your iPad and/or on your computer instead. The problem has also been reported on Facebook's help site as well - it may be related to their new 'timeline' feature or the new iPad that they are rumoured to be announcing soon

Since an automatic update the "Post to Vodpod" button (supposedly developed in concert with Firefox) no longer works, how do I get it back?

The "Post to Wordpress widget from http://vodpod.com/wordpress no longer works after Firefox did an automatic, unrequested update.

The button sounds like it sends a video to vodpod.com but that doesn't match what I see for the extension. The other two extensions came up with a search for vodpod but don't specifically mention vodpod.
* Flash Video Downloader - Youtube Downloader :: Add-ons for Firefox https://addons.mozilla.org/en-US/firefox/addon/flash-video-downloader-youtube/
* Easy YouTube Video Downloader :: Add-ons for Firefox https://addons.mozilla.org/en-US/firefox/addon/easy-youtube-video-downl-10137/
* Share Video :: Add-ons for Firefox https://addons.mozilla.org/en-US/firefox/addon/share-video/

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

IPod Apps no longer work, Music disappears, Fix?

QUESTION : How to fix permanently the “iPod Touch Breakdown“?
(seems identical to the iPhone “Breakdown“)
Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
Here is what I call the “iPod Touch Breakdown“:
- Apps won’t start : the iPod would go back to the home screen after a few seconds.
- Music and Films disappear (My music consists essentially of personnal CDs).
- (for me Photos are still there)
- all original Apple Apps work OK
This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
Two ways:
see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
1- sync using iTunes
2- in iTunes/Store: deauthorize your account
3- sync
4- authorize
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
(the whole process may take several hours; I have also done a reboot between 3 and 4)
(ii) proposed by various people :
1- deselect all applications
2- sync
3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
4- select the Apps you want back
5- sync (will re-load your Apps)
6- sync (to backup you new configuation)
In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
Sadly,
because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
Cheers
(*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

Same issue here since updating to 2.0.2; Is there a way to back I wonder?
So I plugged back in my iPod touch and,...
0. make a note of all your music, movies, photos, apps selections to restore
1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
3. clicked <OPTION>[Restore] once selecting my iPod touch device
4. navigate to <home>/Library/iTunes/iPod Software Udpates/
5. pick the prior update: iPod1,12.0.1_5B108Restore
6. then waited through iPod window status displays
'Preparing iPod software for restore...'
'Restoring iPod software...'
'Verifying iPod Software...'
7. OK the 'Your iPod has been restored to factory settings,...'
8. Ssync process did NOT automatically being so I unplugged & plugged it
(I did verify that 2.0.1 was loaded seeing the App Store)
9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
(mostly 'cause I couldn't be sure which was a good failsafe).
10. iTunes then begin setup of my [ahem] new iPod.
STOP IT; it'll try and do restore everything. Then navigate the tabs for
your iPod and re-select those things you want (music,photos,movies,apps,etc)
So like any computer you need to keep proper backups.
The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
HTH
/los "I was a teenage net-random"

Ipod out no longer works with iOS 6.1

As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
Now, all I get is a constant "Reading" indicator and can't get past this point.
Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
Thanks

Try this.
Go to Settings>General>Date and Time>Set Automatically>Off.
Set the date one year ahead. Try to get email.
If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

I used to use a bookmark for maximizing the firefox window, but in FF9 it no longer works.

Before upgrading, I used the following snippet of code in the "Location" field of a Bookmark:
javascript:self.resizeTo(screen.availwidth,screen.availheight);self.moveto(0,0);
However, with FF9 that no longer works. I attempted to change the front portion (before the open parenthesis) to:
browser.window.resize_to
but after I remove focus from the text box, it adds the "http://" to the front of the code and a "/" to the end of it. I have two questions:
#1. Is there a way to stop Firefox from adding the "http://" and "/" to the location box?
#2. Is there a better way to set up the bookmark (or another quick-access method) to automatically resize the window?

You can only do that in the Scratchpad if an XUL window like about:addons or about:config is open.
*Firefox/Tools > Web Developer > Scratchpad (Shift+F4)
You can no longer run JavaScript code via the location bar in Firefox 6 and later. 
You can see an error message in the Tools > Error Console. 
That code now gets a null principal for security reasons and doesn't have any effect (Bug 656433). 
You need to create a (keyword) bookmarklet and run the code by invoking that bookmark. 
Use the Scratch pad (Firefox > Web Developer > Scratchpad; Shift+F4) to run JavaScript code. 
Open a tab with an XUL page like about:addons (Tools > Addons) to be able to resize or move a window via JavaScript code in the Scratchpad in Firefox 9+.

Win-key / PrtScr No Longer Working

I use the Win-key PrtScr-key. It would take a snap shot of my desktop and automatically save it into a folder called //C:USERS\DOUGLAS\PICTURES\SCREENSHOTS. This folder is located in C\Pictures. I used this combination forever, but it just
stopped working. Even just hitting PrtScr alone no longer works. BUT hitting the Win-key and PrtScr-key will copy it to the clipboard, but understand the I want to make a *.png file in my Screenshots Folder.
Just to make sure I'm clear: Whenever I hit Win-key PrtScr-key it would make a snap shot of my desktop and automatically save it in a folder called //Screenshots. This feature no longer works and I use
it daily. Can anyone please help?
Please let me know if you require additional info.
Thank you

Just to make sure I'm clear: Whenever I hit Ctrl Alt PrtScr it would make a copy of my desktop image and automatically save it in a folder called //Screenshots.
That's backwards IME. Win-PrtScn does what you want for me and is what I have always used in W8 to do that. Alt-PrtScn captures the current window to ClipBoard and Ctrl-PrintScrn is the keyboard shortcut which the Snipping Tool uses for
starting its capture. I don't know what Ctrl+Alt+PrtScn would do, probably the same as Alt+PrtScn. PrtScn by itself would capture the entire Display contents to Clipboard, same as ever.
Make sure that you don't have a Shift- key stuck. Use the OSK to check. Then you would be really pressing Ctrl+Alt+Shift+PrtScn and who knows what that would do? <eg>
Robert Aldwinckle

After updating to Firefox 3.6.13 saved passwords no longer work

Prior to updating to 3.6.13 saved usernames and passwords worked as they should (those fields were automatically filled in). Now after installing 2.6.13 most saved login info will not fill in upon entering the web site. I can go to tools, options, security, saved passwords and all are still listed, yet do not work. I have deleted a couple thinking Firefox would then ask to save login data for that same site, but it doesn't. I tried reverting back to my previous version of 3.5.16 bur saved passwords will no longer work there either.
It seems as if Firefox doesn't see the saved info.

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"

Automatic CC no longer working

Similar Messages

Maybe you are looking for