Automatic chapters created in Idvd 6?

Hello,
Is there a feature in Idvd6 that when it finishes burning that it will automatically put chapters in so that on a stand alone dvd player I can skip ahead (much faster) without fast forwarding (much slower)? Or do I have to put chapter markers in FCP before exporting to Idvd?
Thanks,
Jordan

Jordan:
iDVD can only use chapter markers that are embedded in the movie files that are imported. You'll have to put the markers in yourself in FCP before exporting.
Do you Twango?

Similar Messages

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

After upgrading to mountain lion, the movies I create using iDVD periodically stop then resume abruptly when I play them back on my DVD player. Any ideas on correcting this?

After upgrading to mountain lion, the movies/slideshows I create using iDVD playback in a jolting start/stop manner. This didn't happen with the prior os - playbacks were flawless. Any ideas, short of uninstalling mountain lion, on how to correct?

I know this is not much help. IDVD and Mountain Lion are working perfectly for me. I know many others that use Mountain Lion with iDVD also.
I think your problem lies elsewhere.

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

How can I get a movie that I created in IDVD to load in ITunes and stream to Apple TV?

Welcome to the Apple Community.
You can't, but you have a few alternatives.
Best option: If you made the movie on the DVD in iMovie (or even another editing application) and still have the project, go back to the project and export it for Apple TV (using the Apple TV preset)
Next best option: If you still have the original movie that you put on the DVD, open it in QuickTime and export it for Apple TV (using the Apple TV preset)
Worst option: Use something like Mpegstreamclip (Quicktime Mpeg2 playback component required) to convert the DVD to h264.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How can I burn on a DVD a slide show created with iDvd ?

I try to burn a DVD with a slide Show I create using iDvd. If I whatc the slide show using my Mac all is OK.
When I burn that slide show on a DVD and I put the DVD in my DVD reader, conected to the television, the quality of the images become very poor.
What's appens ??
Thanks
Ezio

Hi
When I burn that slide show on a DVD and I put the DVD in my DVD reader, conected to the television, the quality of the images become very poor.
What's appens ??
As I see it - it falls back on that DVD is as STANDARD only Interlaced SD-Video at it's best (even commercial made ones)
The Quality You see on Your Mac is prior to this down-scaling process.
If You need higher quality (and this includes several problems)
• DVDs can not be used
• You can try Blu-Ray (short one on DVD disks) - BUT You also need a Blu-Ray Player as a PlayStation 3 (you also need a program that can author BD-Disks as Roxio Toast™)
• You can try to Export as HD and to an USB-Memory stick - if You have any device that can take this
• You can connect a Mac to a big sized flat-screen TV - and playback this way
End of ideas.
Yours Bengt W

Can I create an iDVD slide show and keep the picture resolution high so the pictures will be HDTV quality or near HDTV quality for playback on a DVD player?

How do I create an iDVD slide show that does not compress the photos making them low-res? When I insert the iDVD I have made into a DVD player connected to an HDTV, the playback quality of the pictures are very low. Is there a way to correct this when creatinf the iDVD?

The post by Bengt Wärleby in this topic describes a workflow for producing a high quality slideshow but not an HD one as macpmaus pointed out isn't possible: Create HD slideshow: Apple Support Communities
OT

Play dvd created with iDVD won't play in QuickTime

Hi!
Just a simple question:is it possible to play the dvds I created with idvd in quicktime? and if so, how?
If not, are there any other players one could recommend for detailed video analysis and coding? Ideally I need to be able to forward to a specific time and to take notes at the same time (would need that for my research project).
I can not open the dvd with QuickTime, even when I set it as the default player in system preferences.
The only thing that works are VCL and the pre-installed DVD player.
I have QuickTime Player Version 7.1.3.
and the movies are downloaded from my digital camera with iMovie 6 and then exported and burned with iDVD 6
Many thanks!!!

Just a simple question:is it possible to play the dvds I created with idvd in quicktime? and if so, how?
Yes and no. QT does not play DVD material (VOBs in VIDEO_TS folder) natively. In order to play the video portion of the "muxed" data stream requires the purchase of Apple's MPEG-2 QT component ($20). Even then, most commonly used "muxed" audio formats are not supported. Since QT does not properly handle/convert this material, Apple included the DVD Player as you have already mentioned. This application will play both DVDs and VIDEO_TS folder VOBs on your HDD.
If not, are there any other players one could recommend for detailed video analysis and coding? Ideally I need to be able to forward to a specific time and to take notes at the same time (would need that for my research project)
MPEG Streamclip (a free MPEG based third-party application), will also play VOB files (single or multiple file series), allow scrubbing to a particular time, select segments, and, if you have the QT MPEG-2 component installed, perform minor edits, apply "on-the-fly" filters for bightness, contrast, saturation, volume, de-interlace, crop/scale, etc. as it converts to QT compatible formats (if your iMovie projects are no longer available) or third-party formats for which you may have other installed components. While it will provide limited "stream" information, I would not call it an analytical tool. (E.g., provides audio/video information like formats average data rates, audio sampling rate, etc. but not graph/read things like an instantaneous data rate -- something I have been seeking.)

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

Sir Churchill, I tried deleting one of the playlists from my computer (Playlist 130). The next day I checked my wife's computer and noticed that Playlist 130 was now missing from her computer as well. Is there a way that I can delete a playlist from my computer without it disappearing from hers as well?

Create credit memo automatically when creating returns to vendor...

How can i create create "Credit Memo" automatically upon creating
returns to vendor (Movement Type 122) considering right calculation of
the sales tax & withholding tax.

Hi,
There is a special display variant in the item list for invoice reduction. You enter
the invoice quantities or values that differ to the quantities or values suggested by
the system separately into the item list. (You can only enter data in these fields
when you have flagged the item as Vendor error: reduce invoice).
When you post a reduced invoice, the system creates two accounting documents.
The first document contains the invoice postings with the actual quantities and
values. The second document contains a credit memo for the difference between
the actual quantities and values and the default quantities and values.
Therefore, with invoice reduction, you do not actually reduce an invoice. Instead,
you also post a credit memo for the amount of the reduction. The amount payable
to the vendor is the value of the invoice reduced by the credit memo amount.
The PO history is updated with the unchanged default values.
When you post an invoice reduction, the system creates a message record. You
can use this to send a letter of complaint (notification of credit memo posting)
to the vendor.
Regards
Ankur

Completed a project in iMovie which is 41 minutes long (2 GB) . When I attempt to create a iDVD disk(via clicking on share) ,I am advised that an error occurred because the project is too long. Have made other movies/created disks that are longer than 41

Have completed a project in project library that is 41 minutes long ( 2.1 GB ) . When I click share and attempt to create an iDVD disk , an error notice appears claiming the new project is too long. Have created other iMovie/DVD disks in the past which were longer than 41 minutes. What corrections do I need to make to ensure I can create a DVD disk for this 41 minute ( 2 GB ) project... I am using a 17 MacBook pro for this project.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Is it possible, automatically, to create a border when a text is inserted.

Is it possible, automatically, to create a border when a text is inserted.
Example:
List with subjects is:
Name:
address:
etcetera...
When the first subject (Name) is typed then a border will appear around the whole text
Is this possible in Indesgn?
Hans

No. Indesign can't draw borders around text during an interaction. You can either set a border for a text frame or draw an unfilled rectangle around text, which then is an overlaying object, but this can't be automated.
For an interactive PDF with forms, you can assign actions to a form field, but none to make a frame visible, a frame that would surround the text or show a border on one side.

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I burn my DVD with Toast 11?

I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?

no need for Toast ..
tell iDVD to create a disk-image
transfer dmg to othe Mac
launch the Disk Utility, burn that dmg .......

I am trying to create a idvd project but the it does not while encoding the films, Why ?

I am trying to create an iDVD project. I create to sub menus and put small films in each sub menu. When it starts to create the project, while encoding the films, at one point to time it just stops abruptly. Why. I fail to understand. I I tried twice, and it happened the same. I have created the projects in the past, but it has worked just fine. This time it is behaving rather weird.
I went on to see the report and I feels it stops with a 32 bit film. I may be wrong, but could you please help ?

See Bengt Wärleby's post in this topic for questions relating to encoding problems: Stage 4 Multiplexing - Media error in...: Apple Support Communities. He's the most knowledgeable if that area.
OT

How to create an iDVD slideshow from an iPhoto book

Hello,
I created a book in iPhoto and would like to create a DVD of the book. I'm using iDVD 7.1.2 and iPhoto 9.5.1. Is this still a possibility?
Thanks in advance
Scott Lorigan

This tutorial should help: iP05 - Creating an iDVD Slideshow From an iPhoto Book.
Follow this workflow in iDVD to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Automatic chapters created in Idvd 6?

Similar Messages

Maybe you are looking for