Automatic CIF Delta Report Execution

Hi All,
Is it possible to directly execute the results of the of the CIF Delta report i.e.with a background job.
Thanks
Sachin

Dear Ken,
Please see the original message by SACHIN
" Is there a way to execute the results of the CCR report"
From what I understood , he is asking about execution of the results or in other words, the corection methods which the system proposes.. The answer is NO...
If he had asked -" Is there a way to execute the CCR in background". The answer would have been YES.
If you read carefully the HELP CONTENT in your post, it says only the execution or iteration or the results of the comparison which all the mean the same--the results when you run the COMAPARE AND RECONCILE REPORT using /sapapo/ccr
The Correction part, is manual.
I run this report everyday in the morning along with OM17 and we could not figure a way of correcting the results of the comparision in the background because SAP hasnt provided one.
Let me give you 2 examples and I will let you decide whether this is really possible
Say after running the CCR, we have the following 2 inconsistencies
(1) Missing in APO-- and the correction which the system has suggested is " SEND to APO"
(2) Missing in R3--and the correction which the system suggested is " DELETE in APO"
There can be many different error codes and correction methods suggested by the system in a single run*
Now tell me if there was a way for background, how will the system know which correction method to select..
This is the reason SAP has not given any background corerction for CCR as well as OM17...
Kindly run the report and see for yourself and let me know If you have any questions.
Regards
Kumar Ayyagari
Message was edited by:
Kumar P Ayyagari

Similar Messages

Automate a report execution & save results as a flat file on FTP server

Hello Gurus
I am working on BW 3.5 version. I want to Automate a report execution, and save the results of the same as a flat file on a FTP server.---- (So that another program could look it up and run few processes at it's end). pls give me solution in step-by-step format. Plss help.....

Hi Priyadarshini,
You can Automate a Report Execution and Save the results as a flat file by creating a Query Extract and by scheduling the Query Extractor using the T-Code RSCRM_BAPI.
Steps:
1. Goto RSCRM_BAPI T-Code
2. Select the Quey from the list
3. Click on Query Extract
4. Create a Query Extractor and give the file name and Path.
5. Schedule the Query Extractor.
Hope it helps.
Regards,
-Vijay

Scheduled Report execution on Server

Folks,
just one question: Is it possible to schedule report generation on the server?
Here's what I would like to do: At regular intervals I would like to automatically generate database reports (using the Server Object Model).
I would see various approaches, but right now, I have no idea what is actually feasible:
- Trigger Server script execution with BPAADM, scheduled by Windows Task Manager
- Trigger Server script execution by executing a JAR file with JAVA.EXE, scheduled by Windows Task Manager
- Modifying some configuration script in the Server\config directory
- Trigger Server script execution by pure magic ;-)
Any ideas?
Regards, Jörg

Hi Jörg,
we use simple server based batch scripts . These scripts use the functionality provided by the BPA Admin tool to perform different tasks. You can either start macros inside the tool or perform other tasks like backing up the DBs etc.
This is a very simple by proven way to automate server based activities. We use this since the old ARIS days
Cheers
Dirk

Cuic : SCHEDULED REPORT EXECUTION FAILED

Hey.
Every time i try to schedule a report to being send with an email and pdf i only get an email saying
SCHEDULED REPORT EXECUTION FAILED
The email has no subject or anything.
If im scheduling it to send it as xls og html i works fine - but fails on the pdf.
Has anyone seen this before.
The logs says nothing about a failure.
My system is and
UCCX 9.02
Best regards
Thomas

Hi Jörg,
we use simple server based batch scripts . These scripts use the functionality provided by the BPA Admin tool to perform different tasks. You can either start macros inside the tool or perform other tasks like backing up the DBs etc.
This is a very simple by proven way to automate server based activities. We use this since the old ARIS days
Cheers
Dirk

Change Property of any field during report execution.

Dear All,
Can any one tell me that
HOW CAN WE CHANGE THE PROPERTY OF ANY FIELD IN ANY FRAM / SECTION, DURING REPORT EXECUTION ( I MEAN ACCESSING THE PROPERTY OF ANY FIELD IN TRIGERS ).
Please help ....

Thank You Dear aguero ...
You got my point but still it is not applicable. Don't worry, I have solved my problem by other way. The complete story is as under
PROBLEM
========
I have a field DT as a part of query and this field is in the group G_DT. I am using repeating frame based on the group G_DT. I have another TEXT ( not field ) B5 at the bottom margin of the page ( it is a stand alone text and not the part of G_DT ). I want that if DT >= '02-Oct-2007' then show B5 otherwise hide it.
SOLUTION
========
I have defined a user parameter P_Note as character. I have used this parameter in the triger BEFOREREPORT as under.
function BeforeReport return boolean is
begin
if to_date('02-'||:DT,'DD-MON-YYYY') = '02-Oct-2007' then
:P_Note := 'Y';
else
:P_Note := 'N';
end if;
return (TRUE);
end;
AND USED ANOTHER FORMAT TRIGER as under
function B_5FormatTrigger return boolean is
begin
-- Automatically Generated from Report Builder.
if (:P_Note = 'N')
then
return (FALSE);
end if;
return (TRUE);
end;
It works and my problem is solved ..
Thanks for your attention ...... dear aguero

Automate a BI report to flat file on to a FTP server.

Hello all,
I have an same issue like the following thread. After extract CSV file successfully to the directory, but unable to find the file. Any thought?
Automate a BI report to flat file on to a FTP server.
Regards!

Need to analyze the business purpose ,however heres my take on it..
You can utilize 3 options to export query result on to the SAP directories as below and map that path to your FTP server.
1. Transaction RSCRM_BAPI (still valid in nw2004s)
2. Transaction RSANWB (analytical Process designer)
3. Information Broadcasting - KM folder has to be mapped as a file system location.
Hope it Helps
Chetan
@CP..

Discrepancy in report execution duration

Hello,
Everyday we are executing audit reports which tells us report execution time for all our daily scheduled reports. Here we have observed some discrepancy between the time shown in the instance history verses auditing report's data. For example, if XYZ report took 120 seconds to execute, our auditing report shows 110 seconds only (-10 sec difference); however instance status in report history shows 120 sec only.
Here are environment details:
Product: SAP BI 4.0 SP6 Patch 6
Server OS: Windows Server 2008 R2
CMS DB: Oracle 11g R2
Auditing DB: Oracle 11g R2
We would like to know why there is a difference? Please advise!
Regards,
Daya Jha

Issue resolved after doing multiple activity.
- Adding 2 new cluster in PRD environment, After refering Server sizing Guide from SAP
- Adding 4 new Web Intelligence Processing Server in PRD environment
- Assign Static port in all 4 Nodes, Previously it was Dynamic Ports
- Proper spiliting of APS as per SAP APS Sliting KBA (1792286 ,1694041)
- Change Maximum Connection Paremeter in Web Intelligence Processing Server, Because we have more Web Intelligence Business user to view the Web Intelligence reports.By Default SAP provided 50 Connections.
- Change in Tomcat Parameters like
Parameter                Old Value      New Value
XX:MaxPermSize      384 M          512 M
Maximum Memory     2,048           4,096
maxThreads              200              900
Thanks,
Daya

Reporting Services R2 log entries have stopped generating on report execution.

Hi -
I have a new instance of a reporting server and the log files have quit generating on report execution.
When the services restart this is the log file:
rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: CLR runtime is initialized.
rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: Derived memory configuration based on physical memory as 3931704 KB
rshost!rshost!8e8!01/22/2014-17:08:33:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
rshost!rshost!8e8!01/22/2014-17:08:33:: e ERROR: Failed to start service, error=1063.
We have logging turned on on the server. Report Server Mode is Native. Dont see anything in the application log about failed service.
Any ideas?

Hi dwrco,
Have you recently install any update such as MS12-070 (KB2716440)? If so, it is a known issue for some patches for SQL Server. The reason is as follows:
When a .NET application starts up, the .NET Framework tries to check if the Microsoft assemblies are right and have not been modified, this is done through connecting to a server that has a revocation list in internet. When the framework tries to connect
to the server to check if it has access to internet with an elevated timeout, this makes that any other .NET application that has less timeout setting fails (such as SSIS or SSRS) with timeout error.
For example, the error message "The request failed or the service did not respond in a timely fashion." means that the SSRS timeout is lower than the timeout of the connection to the revoke list server established by .NET Framework.
To work around the issue, we usually use two approaches:
Increase the value of ServicesPipeTimeout registry key of Reporting Services
Disable generatePublisherEvidence element of ReportingServicesService.exe.config file
For the detailed steps, please see:
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Store z-table (during an report execution) in a BW system

Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
Thank you in advance

Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
Thank you in advance

How to expand the hierarchy column automatically when delivery reports by a

Hi Experts,
In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
For example:
In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

958054 wrote:
Hi Dpka,
Is it any difference? I look at the result is same.
Firstly, you said it is 'Add member of ',
Now, you said it is 'Keep member of'
Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
•Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
•Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

Oracle Apps - How to create a table before report execution?

Hi,
I'm new to oracle apps, I created a procedure to get some values for a report and created a query to get the remaining values. Now I need to populate those values into a temporary table and after the report execution I have to delete the table. In apps there is no before parameter form. If any one can help me, that will great.
Thanks in advance.

Hi,
Do you really need to create a table INSIDE the report? It doesn't look like a good idea to me. For instance, what happens if 2 users try to execute the report at the same time? I would create a global temporary table before any execution of the report, and then I would just populate the data in the table in the 'Before Report' trigger. The data in a global temporary table is only visible at session level, so you wouldn't have any problems with multiple users executing the report at the same time and the data disappears once you finish your session, so you don't need to take care of deleting the data.
Hope it helps.

Report execution time should displayed in Local Time

Hi,
I have a query related to the Report execution time.
Our SAP Servers are available in US. The Servers are configured in US Time.
We have developed a Z report and used SY-UZEIT to display the Report Run Time.
we also have a plant in India.
When we execute this report for India Plant we are getting the execution run time for US.
But we need to get the run time in India Time.
Please help ASAP.
Regards,
Shankar

Hi Shankaran,
In your Z report, give a condition to check if the Plant is in India. If it is in india, then get SY-UZEIT and add the time difference to get IST.
Display this time on your report.
For implementing this, you will have to convert the Date and Time into Timestamp (use FM "LXHME_TIMESTAMP_CONVERT_INTO"), add the Time to this Time stamp (use FM "TIMESTAMP_DURATION_ADD" and convert it back to Date and Time (use FM "LXHME_TIMESTAMP_CONVERT_FROM").
Reward points if useful.
regards,
Raj
Message was edited by: Rajagopal G

Report Execution time in NQQuery.log should be display in Milliseconds

Report Execution time in NQQuery.log should be display in Milliseconds.
For Example :
--- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
Can we see the logical Query Summary Stats in milliseconds?
If so Where should i cofigure to populate this.

No. If you query comes in less that 1 second then you got nothing to worry about. I haven't seen a single DWH where users would worry about queries returning in milliseconds.

Need information on Reports execution Log..

Hi All,
Need help regarding SAP Report execution log. Here Client wants to develop a report, which displays the information about reports Usage (ABAP Report, ABAP Query and Report Painter).
The report requires the following information.
1. Users who has run the report
2. T-codes of reports
3. Type of report (ABAP Report, ABAP Query and Report Painter)
4. Run times for each instance that the report was run
5. Dates for each instance that the report was run.
Requesting to share the information about the tables or function modules, where I can get the data.
Thanks in advance.
Chanda.

Hi Chanda,
The log can be seen using STAT transaction.
TXN:STAT
Give the date: The required date.
Read Time: 23:59:59
Start Time: 00:00:00 (or ur required time)
User: username/      * (for all users)
Transaction: SE38/      * (For all transactions)
Program:      ztest/
In tools option:
You have further options:
there
Wait time for collection of data (via RFC): 99999
Maximum runtime: 23:59:59
And Execute.
It displays a log of all the details required.
There are few sample programs in this link. Also check out them:
http://www.kabai.com/abaps/q.htm
Programs: 072, 065, 021, 015, 012
http://www.kabai.com/abaps/z72.htm
Best Regards,
Anjali

Report Execution History

Hi all,
I have a requirement like, when the user executes a report; it has to show the previous execution history. Like last time execution date, time and number of times the report wad executed. How can I handle this and which event can I write the code.
Thanks in advance.

I think you have to create a Z table with the following fields.
Mandt.
program name (key field).
Executed by (key field).
Executed on (key field).
Executed time (key field).
YOu have to update this z table evry time you run this program.
Then you have to get the records from this table to find out the report execution history.
tables ztab.
end-of-selection.
ztab-mandt = sy-mandt.
ztab-progname = sy-repid.
ztab-exby = sy-uname.
ztab-exdt = sy-datum.
ztab-extm = sy-uzeit.
modify ztab.

Automatic CIF Delta Report Execution

Similar Messages

Maybe you are looking for