Automatic clearing upon CM creation

Hi guys,
Just want to ask if there's a possibility for automatic clearing of CM created against customers open items in FBL5n while using t-code FB75 (Creation of CM)? The scenario will be like this... Before saving the CM created in FB75, there will be an icon/button to be ticked so that all open items on that particular customer will be displayed perhaps another window/session for FBL5n and can clear the items right there and then by clicking the said transaction. After saving, CM can now be generated and at the same time open items are already included in the cleared items. So that we dont have to use t-code F-32 for clearing. Is this possible in SAP R/3, that there's a link somehow between FB75 and F-32 to clear the CM created and the open items at the same time in one saving? And if not, what are the reasons/limitation of the system? Please help me...
Thanks and more power....
carol

Hi Dave,
Good Day!
Thank you so much. But what im trying to ask is that, it is possible in SAP R/3, to have a link somehow between FB75 and F-32 to clear the CM created and the open items at the same time in one saving, without using F-32 and F.13 as another step for clearing? And if not, what are the reasons/limitation of the system?
Thanks and more power...
carol

Similar Messages

Automatic GR after PO creation

Hello everyone,
I have implemented the flow below :
1) Creation of a PO (ME21N)
2) Creation of the GR (MIGO)
3) Creation of the invoice with ERS functionality (MRRL)
Everything is working fine.
Now I would like to know if it is possible to automate also the 2nd step which is the good receipt of the PO.
The purpose is to avoid having to run MIGO transaction manually.
For instance, is it possible to do the GR in background while saving the PO ?
Or do the ERS functionality enables also to do the GR before the invoice ?
Thanks a lot for your help.

Hi
As mentioned, Auto PO based on GR is one way to automate PO creation upon GR. But whether this PO meets all the business requirement needs to be checked.
You can develop custom programs which can post GR for the POs created, as far as i know there isnt any standard solution for auto GR upon PO creation.
Thanks !
E.Avudaiappan

Automatic clearing of accounting documents

We are having an issue with accounting documents for our credit card orders getting cleared automatically as the billing documents are created. This looks
like a standard SAP functionality. The orders are created with credit card number and it gets authorized. When the billing document is created, it posts the document to accounting and it clears automatically. Is there any user exit that I can use to not make the document clear automatically? Which function module does this use to do the automatic clearing of the accounting document? We also create Repair orders with credit card number in it, but not authorizing the credit card while order creation. Because it does not authorize the credit card, the accounting document for Repair order does not get cleared automatically which is what we are trying to accomplish for our regular authorized credit card orders also.
Thanks!

Thanks Rafael. But we want it to post to accounting, it is just the clearing part we are trying to avoid.

Automatic clearing of downpayments

Dear Gurus,
Kindly i need to know if is it posible to automaticly clear customer downpayment againest the invoices submited to the customer, or it has to be made manually by the accounts receivables accountants.
Regards,

Hi follow these steps:
ADVANCE RECEIPT:
1.CREATION OF GENERAL LEDGER
(Advance from customer account)
2.LINK BETWEEN SUNDRY DEBTORS & ADVANCE FROM CUSTOMER
3.ADVANCE PAYMENT RECEIPT : f-29
4.SALES INVOICE POSTING : F-22
5.TRANSFER OF ADVANCE FROM SPECIAL GENERAL LEDGER TO
NORMAL BY CLEARING SPECIAL GENERAL LEDGER ACCOUNT. F-39
6.CLEARING OF NORMAL ITEMS.F32
Give me point if you find it useful

Recipts with Clearance method by Automatic clearing are not cleared

Hi,
I have a receipt class with a clearance method 'By Automatic Clearing' and have the 'Clearing days' in the Remitance bank set to '1' day. When the receipts are remitted I am expecting them to be auto cleared after 1 day. But the receipts remain in the Remitted status. The receipts are getting clear only when i run the 'Automatic Clearing program' manually. Is this an expected functionality or am I missing any setups. Would appriciate a quick response.
Thanks

Please find the link to a similar question - Dispute Management - Correspondence with additional attachments
I also remember running a program to re-trigger the standard actions to enable auto-creation of letters.
In terms of actual actions - workflow can be triggered when an event takes place.

How to automatically clear the compiler log

Does anyone know how to automatically clear the compiler log window immediately prior to compilation? "Upon compilation" might be a better way to say it.
I couldn't find any preference settings that would enable this functionality.
I'm using SQL Developer version 2.1.0.63.73, which I believe is the lastest version.
Edited by: user1983440 on Feb 11, 2010 1:21 PM

An automatic clearing of the compiler log is not available. This would be a good enhancement request to add to the Exchange: http://htmldb.oracle.com/pls/otn/f?p=42626:16:3459578745962796
Ashley

Email notification upon account creation?

I would like to have an automatic email generated and sent to a user upon the creation of a portal acct (username and pw)......
I have dug around, but am unable to find anything relating to this in the admin piece....
Can anyone put me down the right path?
Thanks in advance for any help offered.....

Go into Portal as orcladmin or portal_admin. Click builder, click on administrator, and in the services portlet go into Global Settings. Then in the main tab, you configure everything you are looking for.
Martin

Assign Status Profile upon BP Creation

Hi all,
Is there a way to default a Status profile and the Initial User profile upon BP creation?
I have Status Profile: ZTEST which has inside 3 User Statuses:
1 - Start (Initial)
2 - Middle
3 - End
I need to have ZTEST automatically assigned and "Start" set as the first Status.
Thank you in advance!
Ciao!
Max

Hi all,
thanks again for your patience.
I am sorry to look dumb but I cannot solve my problem yet.
I have done the following Steps:
I have created status profile ZTest
I have defined 3 user statuses with the following settings:
Status Number - Status - Text - Initial Status - Lowest - Highest - Position - Priority
1 - DRFT - Draft - X - 1 - 3 - 1 - 1
2 - APVD - Approved - - 2 - 3 - 1 - 1
3 - CANC - Cancelled - - 3 - 3 - 1 - 1
I have select Object Type "Business Partner"
When I go in the Transaction control (for each single User Status) and I press "New", two transactions are displayed:
Business Partner Usage
Change (Business Partner)
And for each of these I can define No influence, Allowed, Warning, Forbidden (the remaining columns, i.e. No action, Set, Delete, do not have the radio button below).
Moreover, going in the Object type transaction, I find "Object type does not set initial status".
Whichever combination I try in assigning Transaction control to user statuses, nothing changes in the BP creation transaction (i.e. I can assign any User Status).
Where am I wrong?
I cannot find the place where I assign the transaction to the user status.
I need user status to maintain approvals of Master Data. No need to block transactions etc. What my user expects is to go to BP transaction, press Create Person or Organization, and find there the ZTEST profile with the Draft user status setting AUTOMATICALLY ASSIGNED. So far the ZTEST is to be assigned manually and the initial user status can be selected without restrictions (i.e. I can select Draft, Approved or Cancelled). Anyway, once assigned e.g. Draft, the possible user status changes are correct according to the Low-High status settings.
Thank you.
Ciao!
Max
Edited by: Massimiliano Lamagna on May 21, 2008 4:40 PM

LE-TRM: automatic and immediate TASK creation at TO creation

Hi guys,
Up to know, I succeed in creating TASK either manually in the TRM monitor or by running the report RLTRQSCHEDULER.
I'd like to know how to get the following behavior in SAP LE-TRM (Task and Resource Management) module : automatic and immediate task creation in TRM at TO (transfer order) creation in LE.
Does anyone know how to set this up?
Thx a lot in advance for your valuable inputs.

Activate this BADI and set up Request Scheduler program as a background Job.
method IF_EX_LTRM_RQST_GLOBL_SCAN~RQST_GLOBL_SCAN.
TYPE-POOLS: TRMGC.
DATA: lt_where_tab   TYPE ltrqt_it_where,
        lv_where_line TYPE ltrqt_where.
data: lv_pick(3).
clear: lv_where_line.
lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway, trmgc_rqact_replen, trmgc_rqact_move)'.
append lv_where_line to et_where_tab.
lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway,'.
append lv_where_line to et_where_tab.
   clear: lv_where_line.
lv_where_line = 'trmgc_rqact_replen, trmgc_rqact_move)'.
append lv_where_line to et_where_tab.
endmethod.

Automatic Clearing - Open Item GL Account

Dear Friends,
We have created the Bank Clearing Account as an open item management account. The account would be credited while making the payment to the vendor thru automatic payment run and debited once the payment has been cleared from the Bank. We would like to do the automatic clearing of the open items like GRIR account. Could you please advise what maintenance is to be done on the Config side and which T Code is to be used.
Thanks for the help!
Regards

Dear Raj,
Bank clearing accounts is used to for Bank Reconciliation purpose . If you like to automate this process you have to configure Electronic Bank Statement process. You can check the below links
http://wiki.sdn.sap.com/wiki/display/ERPFI/ElectronicBankStatement
http://www.sap-img.com/financial/customizing-an-electronic-bank-reconciliation-statement.htm
Note: There are so many posts with regards to Electronic Bank Statement process, you can search from the forum also.
Thanks and regards
Praveen.J

GL account automatically cleared by the bank statemetn document

Hello all,
I would like to ask you a question.
We have done the payments by payment run to the vendor , FI document 2000008482 has been created, Then we received the bank statement which created the document 101481822 and the GL account used for this payment 2435000022 was automatically cleared by this bank statement documents 101481822
Usually they do manual clearing by f-03 but for the accoutn 2435000022 its automatic
I have 2 questions
1. where in customizing you set up this option that the GL account is automatically cleared when posting bank statement
2. if they need to reverse payment document, how this could be possible? as if they want to reset the clearing docuemtn, they would have to reverse the bank statement document
thanks for your feedback, its reallt apprecited
regards
Hana

You should feel happy if the system clears the payment document. This what the behavious is expected.
When you made the payment it goes to bank sub account, then when you upload the bank statement, then the system expects to clear based on the cheque number etc.
However, if you do not want you can still stop them from clearing and then entry only gets posted. But again, you will be doing the same job what the system is doing by using F-03 or F.13
Please check your posting type against the posting rule
SPRO ==> Bank Accunting ==> Business Transactions ==> Electronic Bank Statement -==> Make Global Settings for Electronic Bank Statement ==> Posting Rules
Thanks,
Ravi

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

Automatic clearing of open items

hi,
we have customers with 'dummy-invoices' in our system.
There is a document in FI with a value of 0,01 Euro on the customer.
this document is an open item and never will be cleared.
is there any possibility for automatic clearing of such open items ? program SAPF124 does the clearing
only when there is a second document, right ?
reg, Martin

Hi,
Clearing is always against counterpart; that's the concept of this funcionality.
Regards,
Eli

Automatic storage location view creation in maintenace order (IW31)

Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PM

Hi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards

EBS: Automatic clearing of customer open items

Hi Experts,
I am setting up the electronic bank statement with format MT940 structured with field 86. As part of the scope, business is requesting to ensure that customer open items gets cleared automatically when the bank statement is uploaded through transaction FF.5. Because bank statement contains entries relating to payments by customers into the bank account.
But here the problem is that customers will provided ONLY the name. They do NOT provide either the invoice reference number (XBLNR) or our accounting document number (BELNR).
I have searched a lot and found out that I can use the BAdI FIEB_CHANGE_BS_DATA to get the SAP customer number from the customer name given in Notes to Payee fields of MT940. Kindly correct me if I am mistaken.
Now from the derived customer number, I need to find out the related open items which match with the amount given in MT940. So, how does the system know which open items can be cleared for the given amount. Because the paid amount (by the customer) can be for an individual invoice or for a couple of invoices together. Do I need to use the enhancement user exit FEB00001 to specify the system to use fields "Distribute by age" and "Automatic search" field in transaction F-32 ?
Or is there any other better way of achieving this objective of automatic clearing of open items. Asking our customers to provide the invoice reference number is not an alternative since it has already been tried a lot for long without any result. So, business has requested for the set up in our system to ease this process of automatic clearing of open items.
Thanks you so much for your time to help me on this. I will be waiting for your kind responses.
Regards,
Sridhar

Hi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar

Automatic clearing upon CM creation

Similar Messages

Maybe you are looking for