Automatic conversion of PR's to RFQ's - Reg.

Dear Experts
Our requirement is to convert PR's (trigerring from consumption based planning) into RFQ's automatically. While system creates RFQ, system should get the vendors from previous RFQ's for that particular material.
How to achieve this. Kindly suggest.
Thanks in advance.
Regards,
Kumar

Dear Kumar,
SAP Doesnt support automatic con version of PR's to RFQ via CBP.
You need to manually create RFQ.
But in case of PO's it is possible as if you have maintained valid source in the master records, system can assign the requirement to the available sources
Raghavan

Similar Messages

  • In Pages 5, Maverick, How do I stop automatic conversation of URLs to hyperlinks and seeing them underlined

    There used to be a preference setting in Pages.  Now it seems gone in Pages 5.   So how do I stop automatic conversation of URLs to hyperlinks and seeing them underlined in text.  Sometimes I want it, but not always.

    The preference setting to turn off links is gone. When you enter content that triggers link detection, a link character style gets applied. Right-click on the link, choose Edit Link from the menu, and then Remove.
    To prevent Pages from automatically detecting links, visit Edit > Substitutions > and deselect Smart Links.

  • I have taken off/turned off iCloud on my mac mini but when I write an email   and use contacts it will convert a non iCloud email to and iCloud email automatically.  I really don't want this. Any way to stop this automatic conversion?

    I have taken off/turned off iCloud on my mac mini (OS 10.8) but when I send an email and use contacts , it will convert the non - iCloud email to an iCloud email automatically.  Anyway to stop this automatic conversation?    

    Robert...
    the iCloud webserver wont accept my password for a .mac login, nor will it allow me to change it
    See if you can change your password >  Apple - My Apple ID
    If that doesn't help, launch iTunes on your computer.
    From the iTunes menu bar click iTunes / Preferences then select the Advanced tab.
    Click: Reset warnings and Reset cache
    Click OK.
    Restart your computer.
    If that that doesn't help...
    Moreover, when I try to go into my .mac account on the web,
    Delete all apple cookies and empty your browser cache.
    See if  you can access your account at iCloud.com

  • Automatic conversion

    Hi,
    I would like to now if SAP KM can handle automatic conversion to a neutral documents formats (like PDF).
    TREX converts all the documents to HTML but this result is not available as a document in the portal (only when you use the HTML version link in the search results). I would like this result (HTML, PDF or some other format) as a new document...
    Who can help me out here?
    Thanks!

    Hello Simon,
    as far as I know, there's no mechanism in KM to convert documents automatically.
    But there is a business package called "Business Package for Web Editing"
    (find it <a href="https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">here</a> by searching for 'web editing').
    This package contains a KM Service that convertes office documents to HTML-Files automatically using the "save as html"-functionality of MS Office. The result is quite excellent.
    Unfortunately this package is developed by SAP Consulting and they charge a fee for it.
    Please reward points, if this helped to solve your problem,
    Carsten

  • Automatic conversion of planned orders

    Hi PP Gurus,
    I have a requirement to convert planned orders to production orders automatically. I believe SAP standard does not offer this functionality.
    The possible solution seems to be writing new program which could be a copy of C041 transaction code.
    Did someone ever worked on this functionality?
    Request to share your experience and possibilities on this - Thanks
    Regards
    Seshu

    Dear Seshu,
    In my understanding there is no T Code for making the conversion of planned order into a production order as an automatic
    process.
    But you can use the T code CO41 for converting a list of planned order's into production orders.
    In many cases the planned order is only a proposal and only after converting it into a production order and releasing it then the
    exact shop floor activities starts like Good's issue.This activity is done by a production scheduler.So in case if you develop a
    program to convert automatically,then reservation gets generated for all the production orders, which is not recommended.
    Also check this link,
    http://www.sap-img.com/production/automatic-conversion-to-production-orders.htm
    Check and revert back.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Aug 11, 2009 10:04 PM

  • Automatic conversions...A Bug? or just a feature(How to turn it off?)

    I Using TS 3.0(.0.12373) I seem to have stubbled over a annoying 'feature' which I can't turn off...Any one got ant ideas.......
    Every sequence file I load(eg from the \examples\) when When loaded the '*' appears next to the file name indicating a change has happend. When closing the file TS asked "......file modified due to automatic conversions TestStand performed when loading file".
    The only change that happened to the .seq file is a change to the Path, timestamps, and Version(From 3.0.0.12373 in the original to 3.0.0.12374 in the Updated one) at certain points in the file (found using a examine differences program ExamDiff.exe) examples below.
    Any ideas how this feature is switched on,
    and more importantly how to switch it off?
    Cheers
    Attachments:
    rtebeep.seq ‏18 KB
    rtebeep_new.seq ‏18 KB

    Wojtek -
    It appears that somehow you have edited an NI type and incremented the version number. Your debug work was correct, so looking at the sequence file you will notice that the following sections have a changed version number:
    [Action]
    %VERSION = "3.0.0.12374"
    [Error]
    %VERSION = "3.0.0.12374"
    Basically TestStand assumes that the newly edited NI type superceeds the one the TestStand finds in the sequence file. For most NI types, the default copy is stored in the type palette files and these probably have the 3.0.0.12374 version. Depending on which NI type was edited, a copy of the newly edited type might also be in the INI files that TestStand uses in the Cfg directory.
    In TestStand 2.x if a user attempted to
    edit an NI type instead of creating your own copy of the type, the sequence editor would warn them and suggest not editing the NI type. In TestStand 3.0, we wanted to be more strict and not allow editing of NI types at all, but the code did not work properly when released and instead it allows anyone to edit NI types without a warning. TestStand 3.1 now propertly prevents the editing of NI types.
    What I recommend is to search all INI files under TestStand and all your sequence files for the '%VERSION = "3.0.0.12374"' text and hand edit them to replace this text with '%VERSION = "3.0.0.12373"'. This should address the issue for you.
    If you have sent sequence files to others, and you do not want them to see the automatic conversion issue, their files should also be hand edited. Sorry for the inconvenience.
    Sincerely,
    Scott Richardson (NI)
    Scott Richardson
    National Instruments

  • SNMP service automatic conversion

    Does Windows SNMP service do automatic conversion from SNMPv2 to SNMPv1 ?
    John

    Hi,
    If I doesn’t misunderstand, you are talking about the SNMP traps translation.
     If so please refer the following KB:
    When the Microsoft WinSNMP implementation receives traps from an entity operating under the SNMPv1 framework, it translates the traps to the SNMPv2C format. Therefore, when
    SnmpRecvMsg delivers a trap it is always in the SNMPv2C format. RFC 1908, "Coexistence between Version 1 and Version 2 of the Internet-standard Network Management Framework," specifies the rules for translating from the SNMPv1 to the SNMPv2C trap
    format.
    The related KB:
    Translating Traps from SNMPv1 to SNMPv2C
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa379177(v=vs.85).aspx
    Hope this helps.

  • How to disable the automatic conversion from JPEG to TIFF?

    I am using Keynote '09 and Safari 4 on OS X 10.6.8, and I often want to drag and drop a JPEG image from Safari to my slides. I would like to keep the image format as is, but Keynote automatically converts the image format from JPEG to TIFF, so the .key file size becomes large.
    Does anyone know how to disable this automatic conversion? Any idea? I know that I can use the original format if I save the JPEG image at a temporary location, such as ~/Desktop. But I would prefer simpler way. Drag and drop is the best.

    Indeed, having the same problem here.  A simple PPT file that was 1 MB ballons often to more than 10 x the size as a KEY file.  If you rename to zip and open, one notices lots of completely useless "PLACEHOLDER" and background files that occupy several MB in total, plus some small JPGs have been converted to very large PNGs.  This is truly annoying. 
    A similar lack of "file size economy" is present in all applications apple produces for the ipad/iphone.  Images I uplodaded to the photo app become very large (often 10 x bigger).  WTH apple?  Be more economical!  Even my 64 GB ipad2 is starting to feel small with your waste.

  • Automatic conversion of purchase requisition to purchase orders.

    Hi
    I normally convert purchase requisition to purchase order automatically through ME59N. Now I want only firmed requisition to be converted to Purchase order when I run ME59N. Is there any way to do this.
    Other than ME59N is there any way to convert firmed purchase requisition to purchase order automatically.
    Thank you
    Regards
    Sarin Toms

    Hi There
    ME59n is the transaction generally use to convert all the PR to PO
    You can use the release startegy for the PR_PO conversion check instead of Firming indicator.
    (As per the system if anyone do changes or PR is created through MRP this ind will be set automatically,) or you can do minor development on me59n to check the Fixed Indicator enabling before convert the PR to PO
    Lets wait for other experts post on this to check whether is there any other way to do,
    Thanks
    Senthil P

  • Automatic conversion of TDMS files to *.mat procedure in Diadem

    Hello to all,
    I have a very large set of data aquired with a PXI chassis. The data is saved in TDMS files. Each TDMS file contains data from  10 acquisition channel. I have to convert this data into Matlab readable fiels, *.mat files. Unfortnately, there are a lot of files (900GB), each file is very large (17GB), and therefore manual conversion is very long and I cannot afford to waste so much time. 
    Does anybody know if I can develop an automatic procedure in Diadem that will take a TDMS file and output 10 *.mat files?
    I have to mention that I have tried to convert the TDMS files using Matlab scripts found on Matlab Central, but with no success. I have also tried using some VIs I found on the NI Support forums, but all failed. I am left woth this third solution in Diadem that works, but takes a lot of time.
    I am open to any suggestion.
    Thank you all,
    Jean

    Hi Jean,
    Have you looked at this document: http://digital.ni.com/public.nsf/allkb/1706BA4C65A8533686256C630062DD03
    You can use this dataplugin in DIAdem, to import/export files from/to MATlab: http://zone.ni.com/devzone/cda/epd/p/id/4178
    Let me know if you need more informations.
    Regards,
    Benoit S. - Field Sales Engineer
    Certified LabVIEW Developer
    Certified TestStand Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Été de LabVIEW 2014
    12 présentations en ligne, du 30 juin au 18 juillet

  • Dependent tables automatic conversion during transport (SE14?)

    Hello all,
    I have changed the length of our custom ZATLAPC1 attribute of 0MATERIAL from 2 to 3 (data type = NUMC).
    When I tried to activate this attribute in the development system - it asked me to go SE14 transaction and convert /BI0/PMATERIAL and /BIC/SZATLAPC1 tables.
    So that helped.
    But when I transported this change to the test system - the transport failed saying structures changed at field level.
    I could only open the system for changes, went to SE14 to convert tables and activate infoobject.
    This solution is not really elegant to transport this change to production in order to do manual changes there.
    Any one can help me if there is a better option? Is there any possibility the transport will convert dependent tables automatically?

    Hi,
    when activating your IObj in DEV the system has complained asking you to convert the underlying tables. You should accept this prompt; you will then be directed directly to SE14 where you manually adjust the tables. Then you would have gone back to your RSD1 screen and activate it again. The system would have prompted successively the same for each table to be converted.
    If you go by yourself in SE14 (out of RSD1), the "adjustment" won't be "transported automatically".
    Usually the transport does that automatically for simple changes. In your case it would have worked if ZATLAPC1 wouldn't have been an attr of your 0MATERIAL I guess; at least in my case, the transport has nearly always taken care of this conversion automatically.
    hope this shed some light...
    Olivier.

  • Automatic conversion in MM01-MATNR to lower case

    Hi Experts,
        GM,
            We are  facing a problem with Material master(MM01) transaction while creating material in MM01 its automatically converts material number to Lower case..Note: But i we never made the change in Domain MATNR Lowercase check box...
    Please provide the solution very urgent case.....
    Thanks a lot for the coming Answers...
    Preethi,,,

    Pls check if your field has any conversion routine assigned to it. and is this happening only in mm01 or in all transactions?

  • Automatic Conversion in BW Authorization Issue

    Hi All,
    I am having issue in assigning authorization.
    Below is the scenario:
    ZFunction Code is authorization relevant.
    Created 2 authorization object and restricted each with function code 312 and 313.
    Authorization created as I-EQ-312 and I-EQ-313.
    Created 2 roles for each authorization object.
    Assigned these 2 roles to a user. When I execute the query with the user id. It displays no authorization.
    When I check in the logs, it shows that it is automatically converting the condition to Between (BT) and checking function code greater than 311 and 314.
    Not able to understand the reason for this conversion.
    Searched on SCN for solution but could not find any helpful link.
    So posting the query.
    Will appreciate your quick reply in resolving the issue.
    Attached are screenshot of authorization and logs for reference.
    Regards,
    new2sapbw

    Hi All,
    Sorry for the late reply.
    The issue has been resolved.
    Changes done to resolve the issue:
    1) Authorization variable created had Variable Represents (under details tab) as "Several Single Values". Changed it to "Selection Option".
    Reason being, Several Single value does not interpret values given in an order as individual values. It converts into between condition/range. Example, Fun code 312, 313, 314 are considered as Between 312 to 314.
    2) We already had a exclude restriction on the info object/characteristic. After adding the authorization variable of type Selection option, we were not able to save the query and were getting "SELOPT error does not allow any further selections".
    Reason being when using authorization of type selection option, we cannot add any further manual restriction.
    Resolved this by dragging the info object to "Characteristic restrictions" area in filter tab and restricting it with authorization object.
    dragging the info object again into "Default values" area in filter tab and restricting it with exclude restriction.
    By doing above two steps resolved the issue.
    Thanks a lot for all your valuable inputs.
    Regards,
    new2sapbw

  • Any Automatic conversion from JSP to WebDynPro

    Is there is any Automatic approach to have conversion from JSP to WebDynPro

    +1
    Even for JSF (Java Server Faces) application this would be a manual process.
    Even both JSF and WD have a lot of similar concepts there are numerous differences in approaches used here and there, that cannot be automated. Or at least you'll spend more time for the tool then for the manual job.
    VS

  • Automatic Conversion of PR to PO.. Need User Manual for ME59 T code

    Hai Sap Gurus,
    I Got the following content from net. but kindly help me by sending me user manual for ME59.
    You created purchase requisition for various material. During creation of purchase order you used the following path:
    Purchase Requisition
    .......Follow on function 
    .........Create Purchase Order
    ............automatic via purReq. 
    When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item. 
    Is there any setting in customization where you can monitor and use that function.
    In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met: 
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked; 
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked; 
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO; 
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record. 
    or 
    it might be PR subject to release strategy and not yet released
    or 
    If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58
    Thanks.. Reply me pls...
    Edited by: Swetha SAP Girl on Jun 18, 2009 2:19 PM

    Hi,
    Step by step process for automatic  PO creation from PR
    1.  Tick check box in purchasing view of Material Master(MM01/MM02)
    2.  Tick check box for auto PO in purchaisng data of Vendor Master record (MK02)
    3.   Maintain Source list for Material,plant and Vendor combination in ME01
    4.   In ME51N create PR and assign source of supply in "Source of supply" tab
    5.   In ME59N key in Purchaisng Org., Vendor and Plant - execute
    You will get POs created with reference to PR automatically.
    Hope its clear
    Regards,
    Uzair Hussain

Maybe you are looking for