Automatic Cr. Management :Sales order blokced for Delivery
Hi.
I have done the Automatic Credit Management.
I would like to block the sales order from being delivered. The delivery block needs to be set to "01 Credit limit"
I have done the following settings.
In the Definition of Sales Order,
Check Credit Limit : D
In the Definition of Item Category,
Credit Active field is checked.
Order type is assigned to the credit check type D and Group 01 in OVAK.
In ova8, for this combination of the Cr. Ctrl area /Risk category / Cr. Grp.
Dynamic -ticked
Reaction A
Status/ Block - Ticked
FD32 is done.
Did i miss any customizing here? i would like to have the Auto Cr. Management (D)and not the simple cr. check(A, B or C)
Do reply.
thanks
Venkat
Hello Venkat,
Below is whole procedure for Aut Crdt Mgmt.
1. Transaction OB38
Check which credit control area is assigned to the company code.
Company code:
Credit control area:
2. Transaction OVFL
Check which credit control area is assigned to the sales area.
Sales area:
Credit control area:
3. Transaction XD02 or VD02
Check which credit control area is assigned to the payer.
Payer:
Credit control area:
4. Transaction SE37
Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
OB45, or the credit control area must be entered under the relevant company code in table
T001CM of the credit control areas allowed.
Company code:
Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
Which settings do exist for the sales document type used?
Sales document:
Check credit:
Credit group:
8. Transaction OVAD
Which settings do exist for the delivery type used?
Delivery type:
Credit group for delivery:
Credit group for goods issue:
9. Transaction OB01
Credit management/Change risk category
Definition of the risk category for each credit control area. This risk category can be
assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
Here, the individual credit checks for key fields
o credit control area
o risk category
o credit group are set. Take these key fields from the above settings and go to the detail
screen. In particular, check whether fields "Reaction" and "Status/block" are set
correctly. To carry out follow-up actions in case of a credit block, the credit check
status must be set (field "Status/block").
11. Transaction FD32
Credit master data for the payer of the relevant document.
Credit account:
Credit limit:
Risk category:
Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
check (static or dynamic credit limit check).
13. Transaction OVA7
Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
field "Active receivable" in Transaction VOV7.
Item type:
Active receivable:
14. Transaction V/08, Pricing
In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
determining the credit value (mark the pricing procedure and doubleclick on "Control").
Usually, the net value plus taxes is used. This way the system is determined to use this
subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
update and credit check.
You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
Pricing procedure:
Line with subtotal = 'A':
15. Transaction OB45
Which update group (field "Update") do you use in the relevant credit control area? The
default setting is "12". If you use another update group, check whether this is fine with
you. If you open an OSS message, please tell us the alternative update group.
Credit control area:
Update:
REWARD POINTS IF U FIND THIS AS USEFUL...
Regds
MM
Similar Messages
-
Sales Orders Blocked For Delivery
Hi,
Do we have T-Code for Sales Orders Blocked For Delivery other than VA14L,Because Customer name is not there in VA14L list.
Thanks,
NAGHi naga sudhir
Go to T-code--VA14L
In that go to menu-SettingsLayout--Current/Choose
In this layout u can choose fields what u want to appear in that row.
Any quries revert back to me
Regards
Srinivas. -
Plant Info is blank in Sales Order Due for Delivery (VL10A)
Hi experts,
In VL10A sales Order Due for Delivery, i have fields like Name, GI date, plant and shipping point.
There is data on shipping point. However, the plant field is blank. I like to get data for the plant.
Can you pls point me to what user-exit or how I can modify the program to bring data for plant ?
I am aware that VL10A list orders at the header level.
Thank you.
Joyceclosed.
-
Sales order blocked for delivery but not showing in VA14L
A Sales order is in delivery block and its not showing in VA14l Delivery block .
Please help.
Regards..
BhyravHi,
Transaction VA14L report displays sales orders with header level delivery blocks & credit blocks.
If the delivery block in sales order item level the VA14L will not display those orders.
You may try V.14 transaction but it will not display sales orders with credit related delivery blocks.
Otherwise, provide more inputs so that it would be easy to analyse the issue.
Regards
Suresh. -
Want to know the sale order report for Delivery bclok at header level
Dear,
i would like to know some reports
1). I would like to know is ther any SAP std report is available for Sale order if Blocked for delivery(VBAK-LIFSK)??
2). is ther any report for knowing the Sale order if header/item text is maintained??
Pl advice if any std report is available.
Thanks in advanceDear Pradyumna,
Thanks for your reply, I did't find any Header r item text in the report.
Pl suggest is there any other report is availble???
Thanks in adv. -
Hi,
My requirement is -
whenever I save any sale order,by default it should be block for delivery.
how to make the setting in system.
HarshHi
Put Delivery Block at Sales Order type in t code VOV8.
regards
kedasu.a -
Sales orders due for delivery beyond credit horizon date credit blocked
Hi
I have given credit horizon date as 1 month . When I create a sales order which has a single item and schedule line with delivery date after 45 days i.e clearly after the horizon date , document is blocked with credit limit block .
I am actually testing the cycle after I changed credit horizon date from 3 months to 1 month .
Is there any thing else to be done like running any reprort , etc ?
Regards
Raghav SSkHi,
I had the same problem. The Horizon the 1 month mean that every sales order that entry in the systen during the month, will be affected the credit exposure.
For example.
Today is 02/july and my horizon are 1 month, so the date are 01/august. Every sales order tha entering in period between july and august will be affect the credit exposure. The sales order entering in 05/august, the credit will be affected. The sales order entering in 30/august, the credit will be affected, but if you enter the sales order in 01/september the credit will not be affect beacause the month is different.
Another example
Today is 02/july and my period are 2 months, so the date are 31/august. Every sales order that entering in period between july and august will be affect the credit exposure. If a sales order entering in 01/september, the credit exposure is not be affected, because the month is different.
Regards
Paulo -
Sales Order dates for delivery
I am a newbie to most of SAP and was wondering how are all the dates such as loading, goods issue etc... calculated from the delivery date? Assuming its based on sold to and delivering plant where is this config done and what is logic?
hi
u can maintain those settings in OVXD
or
you can maintain Pick/pack time & Loading time in
SD>basic function>Delivery scheduling & transportation scheduling-->maintain durartion.
To maintain transportation lead time & transit time it can be done in logistic execution>shipping>basic shipping function>routes> define routes-->define routes & stages.
you can see the logic below:
when you are creating sales order first system will go with backward scheduling if it is not reach the dates then system will go for forward scheduling.
Backward Scheduling:
Reqested delivery date - Transit time = Goods issue date
Goods issue date - loading time = Loading date
Loading date - Transportation lead time or pick/pack time = material availability date.
In case Material availability date fall beyond requested date system will perform forward scheduling
Forward Scheduling:
Loading date = Material availabilty date + pick/pack time
Goods issue date = Loading date + Loading time
Requested delivery date = Goods issue date + Transit time
Delievry scheduling will be started only from the material availability date i.e., system will first determine the material availability date and then do scheduling. By default Standard SAP system does Backward Scheduling in case material availability falls beyond the required delivery date system will do forward schedluing -
Sales order block for delivery
How to put delivery block to existing open sales order for particular sold to party(customer). Is there any table or TCode where we can put multiple sales order to put this block. Dont tell VD05 bcos that will apply only to new sales order not to existing sales order.
David.Dear David
- run MASS, input Object Type [BUS2032] and execute.
- Select Sales Order header data and click on [Fields] on top.
- Select the field MASSSDHEAD_S-LIFSK and execute.
- Input sale orders which you want to block and execute.
thanks
G. Lakshmipathi -
Sales order blocked for Delivery
Hi All,
Kindly help me providing the T code to release the block.
Regards,
SKHi,
If the Delivery Block is CREDIT BLOCK then you can release the Block in transaction code VKM3 /VKM4
If the document block is for return process or credit memo, then you can remove it in the VA02 itself.
Make sure which scenario blocked your sales order for delivery.
santosh -
Sales Order Status for Delivery.
Hi Guys,
Thanks for answering my previous question. I have been asked to solve another problem for the SD department.
How can I find out if a sales order is ready to be delivered? Is there a list display where in I can see all open sales orders and the qty of units are ready to be delivered for each of the line items.
Thank you.Hi SRao,
If you want a list of open orders based on the ATP check, you have to customize a report program based on the transaction VA05 and based on the business requirement.
Normally, once the Delivery is created for the sale order fully, then the status of the Sale order would become complete. If it is partial delivery of the Sale order, then the Sale order would be open.
And if you want to take the list of Open orders, you have to necessary prepare a report program with all the Schedule lines and the list of available dates for the line item based on the availability of stock.
Hope this helps.
Thanks
Augustine Ponraj -
Report for viewing Sales order no against delivery date & actual GI date
Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit -
Route not determing automatically at sales order level for some sales order
Dear All ,
Route not determing automatically at sales order level for some sales orders.We are using automatic route determination without wt group,eventhough we have configured the required settings
I have checked all the forums but didn't find any solution for the same.
Looking for your inputs .
Thanks inadvance
Regards
VenkatHi
1. Copare the Routes which are Automatically determined and which are not automatically determined
2. Have you mainted this route to be RELEVANT FOR TRANSPORTATION without this check route will not get picked up.
SPRO > Logistic General > Shipping > Basic Shipping Function > Routes > Define Routes > Define Routes and stages > Select the Route and check for it's settings > CHECK MARK Relevant for Transport. Without this check the route will not get picked up as of my understanding.
Thanks
RB -
SD consolidating multiple sales orders onto a delivery
Dear SD gurus, I have a situation where I am trying to consolidaqte multiple sales orders onto a delivery. I have read the documentation and have created sales orders with the same: ship to party, incoterms ect. I have also selected the 'combine orders' check box in the customer master record. I am generating the deliveries using VL10A - but I am still getting one delivery for each order. Is there anything else I need to do?
Hi Jacqueline,
Basically, all fields which are copied to the header of the delivery (tableLIKP) via the routines of the copy control lead to a delivery split. Furthermore, some fields are copied to the header by all means and are relevant for the split there.
Split fields that cannot be changed are:
VSTEL Shipping point
KUNNR Goods recipient
ROUTE Route
The following split-relevant fields can be affected via the copy control,however, they should not be filled differently from the defaults since they are necessary for the control of the shipping process:
VKORG Sales organization
AUTLF Full delivery indicator
VSBED Shipping condition
FKARV Billing type (customer billing document)
LIFSK Delivery block
STAFO Update group for statistics
STWAE Statistics currency
KKBER Credit control area
KNKLI Account number of the customer with the credit limit default
GRUPP Customer credit group
SBGRP Processor group for credit management
CTLPC Credit management: Risk category
CMWAE Currency key of the credit control area
WAERK Currency of the sales document
INCO1 Incoterms 1
INCO2 Incoterms 2
KZAZU Indicator order combination
KDGRP Customer group
PERFK Invoicing dates (calendar identification)
Hope this helps
thanks -
Status : Being Processed in Sales Order after the Delivery and Billing also
Hi All,
For one Sales Order........ Delivery and Billing are over but it shows
In the Sales Order> Header level>Status bar>Overall Status>Being Processed.
In Document Flow:
Sales Order xxxxxxxxx : Being Processed.
Delivery xxxxxxxxxxxx : Completed.
Billing xxxxxxxxxxxxx : Completed.
Functionally we checked everything......but through technically we can solve the issue or not
Pls help me with some solutions.
Advanced Thanks.
Diwakar Reddy.
[email protected]Hi,
This generally happens if the sales order is for a quantity greater than the quantity delivered.
SAP treats the sales order as still open and delivery of the remaining quantity is possible through that sales order itself. So the status is shown as "Being Processed".
If you want to see the status as "Completed" then you need to cancell the remaining open items in that sales order. Automatically the status will change to "COMPLETE"
Hope this solves your querry.
Regards,
Anirban
Maybe you are looking for
-
I m trying to install microsoft xp on my new Mac
I m trying to install microsoft xp on my new Mac, however after completing the xp installation it now say i need to have windows 7 instead of xp and hence i m not able to use my Mac OS now . Please let me know if I can use xp or in worst case scenari
-
Problem in filling datagrid with a java service
Hi i have a java service that returns an arrayList of TypeTicketVO ,in the side of java when i tested my service it returns the correct result in the console but in the side of flex data grid is always empty and not filled with data (in fact this c
-
How to monitor process in Java
Dear All, I am developing an application to monitor an external Java application. My application will start an external java application. I can start external Java application from my monitoring application. Now I want to check that the external appl
-
My 4 month 5s wont charge the charging symbol has a little bit of red in it and it keeps flashing on and of in the battery symbol
-
MBP Will not close shut :(
This thing is treated like gold and I havent done anything bad to it at all but now the lid wont close all of a sudden. The hooks do go down and catch, but cannot get a proper grip. This is a video from youtube of someone else having the same problem