Automatic creation InternalOrder inECC after Service Order creation in CRM

Hi,
After Service Order creation in CRM,  the automatic creation of Internal Order in ECC not happening, needs to be do the related settings. Can anybody share the stepts for the same to do the settings.
rgds,
balu

Hello balu,
Have you released all items?
Also,please make sure that against the item category "Assign BW/CO" is set to Service.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Similar Messages

  • Service PR amount is noyt reduced after Service PO creation  in CJI5 report

    Dear Experts,
    When user created Service PO with T-code ME21, Service PR amount is not reduced from CJI5 report & also increased budget in CJ30.
    But when user create PO with T-code ME21N, Service PR commitment is getting reduced after Service PO creation in CJI5.
    Please explain & propose solution.
    Thanks & Regards,
    Arvind

    Hiiii...
    Note that there is no difference between creation of purchase order via the t.code ME21 or ME21N...what might be your problem in increase of assigned values is because the buyer (purchase dept) is not referencing the purchase requisition at the time of creation of purchase order as a result of which the system is not reducing the purchase requisition committment.
    Hope this helps....
    Regards
    Kaashif M

  • Exit after sales order creation - whait is ?

    Hello,
    for some material entered for an item on sales order, an order is automatically created.
    I need to modify this order by an exit: so I'm searching an exit called when a sales order is saved and after the order creation.
    do you have some ideas ??
    P.S. MV45AFZZ it seams called before the creation of an order and not after.
    thank you.

    Used      MV45AFZA

  • Credit block should not prevent service order creation

    An upgrade from 4.7 to  ECC6, without any changes made to the configuration or program change, has lead to the following issue. ECC6 is not creating a service order connected to a sales order, when the customer has exceeded the credit limit. The sales order of custom order type is getting saved with a warning message that credit limit has exceeded. However, earlier in 4.7, the message would not stop creating subsequent service order. What could be different, that prevent ECC6 environment to hold on to service order creation? A subsequent release of the credit block through VKM1 however triggers the service order being created.

    Are you using credit card processing in SAP to get the authorization?
    If you are then the authorization should not block the order.
    Or are you using credit card as a form of payment (without authorization) in which case this needs to be put on the customers account as a payment and then the order entered.
    Where are you holding the credit card details?

  • Service Order Creation through IC Web client

    Hello Experts,
    I am facing some problem for service order creation in IC Web client.
    Description: "ISUSRV" is the new BOL component in CRM 7.0 for service order creation in ISU System. BOL Object is given in this component is "IsuserviceOrder" for service order creation.
    Through this component in BOL i am able to search service order.
    Problem: When i am trying to create new Service Order it gives error Massage creation failed.
    (1) How to create service order through this BOL Root Object "IsuServiceOrder" which field are required to fill the data before create order.
    (2) I found ORDER_CODE field in BOL Root Object "IsuServiceOrderu201D when trying to create order what value fill in this field.
    (3) I have create one view Using BOL Root Object "IsuServiceOrder" with Save button how to save the service order through this button. What code is required for Save the View data?

    Hi Gagan
    Could you please share with your solution, i am kind looking help in same are. We are using CRM 7.0, but i can not find BOL component which is ISUSRV.
    My requirement is to create Service Order from Webclient, example meter problem reporting, etc
    Please kindly reply or by email shankar no dot vangari at gmail com
    regards
    shankar

  • BAPI for Service order creation

    Hi ,
    Please tell me if any Bapi for service order creation  , T-code : IW31
    regards,
    Prakash

    Hi Prakash,
    Have a look on the following BAPIs:
    BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
    BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
    WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
    Hope this will help.
    Regards,
    Nitin.

  • BOM change after Purchase order creation

    Dear all
    My client requirement is an error message should appear when the end users are trying to change the BOM after the purchase order creation for the BOM items and the system should allow the BOM change only after the PO cancellation.
    Please throw some light
    regards
    Kumar

    Dear Kumar,
    Do you mean to say user's should not be allowed to change hte BOM items in a purchase order?or should not be allowed to change a
    BOM,if there are some purchase orders for the same material?
    If your requirement is to restrict the BOM change of a material using T code CS02,after purchase order creation,I dont think its
    possible.
    Please explain your problem little more in detail.
    Regards
    Mangalraj.S

  • Quotation Creation and Billing for Service Orders--node details needed

    Hi ,
    I need to work on node "Quotation Creation and Billing for Service Orders" ....I see lot of integration with SD and FICO . Can any one give details about integrations required and what is done in this node ....
    Regards
    NPB

    There are different steps to be done for that.
    1. Create DIP Profile in ODP1 & check the consistency in ODP2 - DIP will be used to bill the customer based on resource (labor & material) usage. Creation of DIP profile has been discussed many times in this forum. Please check.
    2. Assign the Quotation document type & Billing type used in DIP profile to your sales area - Your document type should be assigned to your sales organisation, distribution channel & division combination.

  • Link between Service Order / Confirmation in CRM and Purchase Order in ECC

    Hi all,
    Does anyone knows what the possible link is between a Service Order / Service Order Confirmation in CRM and a Purchase Order in ECC ? I heard that this could be found somewhere in the document flow of a Service Order ....
    How do we get the Purchase Order number from ECC in the Document flow section of an Service Order in CRM ?
    We need the PO number somehow to be able to create a Goods Received document in ECC from CRM.
    BR,
    Abjuh

    Hello Abjuh,
    As of CRM 4.0 (with Service Industry extensions), you can automatically create ECC Purchase Orders from a CRM service order.
    It is possible to track the status of the individual service order items with the document flow.
    Please refer to the SAP Help for more information.
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/8bae7e9e886160e10000000a1553f7/frameset.htm
    Kind regards,
    Kristoff.

  • Service order replication from CRM to R/3- Error confirmation status

    Hi,
    We are trying to replicate a service order created in CRM 5.0 to R/3 ,
    the service order is saved without any errors both the item and transaction have status released but when we try to create a service confirmation as followup it shows a message "Service process 8000000023 cannot be confirmed due to its status"
    and on checking in txn:SMW01 it shows status as "sent to recievers" and a message "R/3 adapter called"
    Please can you tell me regarding the status that is to be maintained for successfull upload of service orders to R/3.
    Regards
    Prathiba

    Hi Pepe,
    Thank you for your quick reply.
    The status of the item shows "To be distributed" when i try making changes it shows a message
    "Document being distributed changes cannot be made"
    How to rectify this problem?
    Regards
    Prathiba

  • Automatic Service Order creation and OBD line item creation - Repair Order

    Hi ALL,
    I tried to run the Repair process based on the help document of SAP:
    Configs Followed:
    1) In Material master MRP3 view, strategy group is assigned as 84 (service orders). By default this str.grp is linked with Requirement type SERA and Requirement class 203.
    2 ) Requirement class is assigned with appropriate Service order type.
    SPRO>Sales and Distribution>Basic Functions>Availability Check and Transfer of Requirements>Transfer of Requirements-->Define Requirements Classes (OVZG)
    Actual Assignment:
    Reqt. Class Service Order Type
    039 SM01
    203 SM01
    3) Task list is assigned to your Service material - Service product - OISD
    Actual Assignment:
    Service Pdt Work Centre Plant B Area Gen TL Group Counter Task List Type
    R-1001 PC-SERV 1200 8000 62 1 A
    4) Check the Requirement class setting indicator for configuration (cnfg)
    Actual Assignment:
    = mandatory
    5) SPRO>Sales and Distribution>Basic Functions>Availability Check and Transfer of Requirements>Transfer of Requirements-->Define Requirements Classes --> Determination Of Requirement Types Using Transaction
    Actual Assignment:
    Item Category Reqt class Reqt. Type
    IRRS 039 SE
    IRRE 203 SERP
    IRRP 203 SERP
    IRAL 040 KE
    6) Sales and Distribution>Sales>Sales Document Item-->Assign Item Categories for determining the item category based on usage
    Actual Assignment:
    Sal. Doc. Type Item Cat. Group Item Usage H. L . Item Cat Item Category
    RAS NORM IRRS
    RAS NORM R101 IRRS IRRE
    RAS NORM R102 IRRS IRRP
    RAS NORM R103 IRRS IRAL
    Errors Faced:
    1. Service Order is not getting created automatically.
    Error in SAP - IDES :"A service order has not been found for action 'Repairs'"
    2. Also im not getting the automatic creation of the 4th line item(Item Category - IRAL) in the repair order, which in turn stops me from creating the Outbound delivery.
    Please HELP !
    Regards

    Hi PeteA,
    Sorry, here it is...
    Let me explain the process that has been followed:
    1) Initially to start with Service Notification was created with IW51 T-code.
        In that, Sold to party and material # were entered. Then from there directly i go for Create Repair Order from the Action Box.
        Order type for repair order - RAS, and when i save both Service Notification and the Repair gets saved.
        Now, in the repair order, two line items were getting created automatically and the requirement Types for those line items are:
        Line Item I : SE
        Line Item II: SERP
    2) After that i take the material in with the help of t-code VRRE.
    3) Then, i do the acceptance of the stock ( Technical Check) with t-code QA11.
        Once i do that, i get the Third line item in the Repair Order and the requirement Type for that line item is:
        Line Item III: SERP
    Now my query is, Once i do the QA11 transaction i need to get a Service Order automatically but thats not happening.
    Also if i create a Service Order manually, and do the repair and do the technically completion of the service order, then i need to get a third line item (IRAL) in the repair order automatically and thats also not happening.
    Regards

  • Automatic creation of Reservation for Service Order (Return and Repair)

    Hi, Looking for your valuable help on Creation of Automatic Reservation
    I am working on Return and Repair process at Plant.
    1) So far
    Service Notification > Repair Order > Return Delivery > Service order . has been done.
    now requirement is when i am saving the service order for the Object (Fisnished Goods), in which components  required for servicing of material are maintained, when i will save the order a Reservation for the same needs to be reaised to Warehouse automatically.
    2) In Repair order all operation and components are not reflecting when i am selecting the line item and going to EDIT > Display Range > All Items in VA02 for which i need to do DP90.(Resource Related Billing)
    Please hepl,
    Thanks
    SUDIP SINHA

    Thanks for giving valuable answer,
    what if in the service order i am replacing some spare parts along with services when FERT is not under warranty. How the cost will be transfered to invoice. In my case only one service is transfered.
    i waqnted to transfer cost of components as well..
    Thanks
    SUDIP SInha

  • Blocking the Creation of PO in Service Order

    Hello SAP folks,
    I have got an issue where I have to block the Creation of Purchase Requisation Number(BANFN) which is generated  in the background after the creation of the Service order(IW31)  I have tried the user exit EXIT_SAPLCOIH_009 but while coding i could'nt trace the field which is holding the value of PR number.Please let me know is it possible to stop the creation of PR if Yes, Please guide me in this issue in terms of coding.
    Thanxs in advance.
    Regards,
    Indira

    Hi Indira,
    Try these User Exits.
    CNEX0013  Order: Cust. enhancement: Default item category comp. a
    CNEX0026  Customer enhancement for general inspection of material
    CNEX0027  Customer enhancement: Plant, storage loc. finding for c
    IWO10004  Maintenance order: Customer check for order completion
    IWO10005  Maintenance order: Cust.-specif. determination of profi
    IWO10006  Maint. order: Fcode exclusion through cust. enhancement
    IWO10007  Maint.order: Customer enhancement - permits in the orde
    IWO10008  Cust. enhancement: Determination of tax jurisdiction co
    IWO10009  PM Order: Customer Check for 'Save' Event
    IWO10010  Maint. order: Cust. enhancement for determining WBS ele
    IWO10011  Maint. order: Customer enhancement for component select
    IWO10015  Maintenance order: F4 Help for user fields on operation
    IWO10016  PM Order: Cust. enhancement to check operation user fie
    IWO10017  Determine external order number by customer logic
    IWO10018  Maintenance order: User fields on order header
    IWO10020  Maintenance order: Automatically include task list
    IWO10021  Automatic task list transfer when creating order from n
    IWO10022  Determine calendar from user exit
    IWO10023  Service order: Change header data for advance shipment
    IWO10024  Service order: Changes to items for advance shipment
    IWO10025  PM/SM order: Finding responsible cost center
    IWO10029  Inclusion of bill of material in PM/SM order
    IWO10030  Preset Fields for Event Object
    IWO10031  Hide personnel number in PM/SM order
    IWO10033  Customer-Specific Authorization Check Maint./Service Or
    IWO10034  Operation status based on the status of capacity reqs
    Regards,
    Vijay

  • Automatic identification of contracts in sales order creation

    Hi,
    I have configured quantity contracts as a automatic determination during Sales Order creation .When i try to create sales order using va01, after i enter Sold-to Party and Material then i hit enter ,system pops up with a dialog box with list of all the contracts existing with that Sold-to Party and Material combination.
    Can someone suggest me , is this pop -up window is a User Exit?  If so . can you pls let me know .
    I went to program SAPMV45A , which has many includes and try to check the include MV45AFZZ , but could not find out the one which i want for Pop up window.
    Thanks in advance
    Points are fully rewarded

    Hi,
      If it is a standard sap configuration..Then it may not be a user exit..
      After entering the sold -to party ...Then press /H in the command button..
      Then start debugging..You might the call.
        OR
       after the popup is displayed..Press F1 on any one of the field..In that help..press technical info button...Then check the program and  screen number..
    Go to SE51 with the program and screen number.Then press the where-used list button to get the calling place..
    Thanks
    Naren

  • Service order creation from sale order

    Hi Friends,
       Could you please tell me where is the setting for the automatic creation of service order from sale order.
        Iam using LEIS , TAD and CD as the sales documents and SM01 as service order document.
        Am I missing something?
        Please let me know.
        Regards,
        satish

    Hi Satish,
    The setting for creation of a service order from sales order can be found in the Requirement class configuration.
    To know how to link, check the procurement tab in the sales order, note down the requirement type associated to the line item. Requirement type is linked to requirement class. In requirement class you find the configuration.
    Standard SAP creates SM03 (refurbishment) type of service order from sales order.
    Reward points if useful.
    Regards
    Ananth

Maybe you are looking for