Automatic creation of applicant activities

Dear Experts,
I have created application status and applicant activity type and also configured for automatic creation of applicant activity. But after performing applicant action automatic applicant activity is not reflecting.
Did I miss any step.
Help me to solve this issue.
Regards,
Goldy

have u maintained the feature PACTV???

Similar Messages

BAdi - Automatic Creation of Transaction Type (Activities/Tasks)

Dear Experts,
we have a customer requirement to create automatically Activities/Tasks if a certain date is reached. The user just want to receive a alarm/note when there is a created acitivitie.
Which BAdi we casn use for the automatic creation of activities? Which options we have to do that?
Relevant tables are CRMD_ORDERADM_H and CRMD_ACTIVITY_H as I know.
Note: We can no use the visit plan.
Best Regards
Oliver Schultze

Hi Oliver,
CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE are the function modules to create and save a business transaction. As you have the requirement to create Activities, Arden has suggested these function modules(transaction SE37). Based on your business scenario, you can use these FMs in BADI implementations to achieve the functionality.
Thanks,
Priyanka

Automatic Creation of Maintenance Plan, Measurement plan

Hi Pal
Business : The equipments are procuring for the purpose of supplying into customers.It is installed (via sales delevery) at customer location as requirement. From the installation date rental will start and periodic visit is applicable after every 3 months. The technician will capture some reading In initail installation time, periodic maintenance time.
Requirement : The equipment will be created automatically thro serial no when doing the GR(Its possible) . Automatic creation of Maintenance Plan for the equipment for 3 month frequency, 70% call horizon, early and late completion of 100%. Additionally the scedhule start date need to pick it from the notification end date of its respective equipment.Also measurement points should be generated in automatic way (Its fixed& common for all equipments).
Is there any possiblity to complete this requirement? Please help me and suggest.
Regards
Thenna

There is no suitable BAPI available to create Maintenance plan.
Try for BDC.

Automatic creation of Transfer Order when a delivery is created

Hi all ,
I wanted to have Automatic creation of Transfer Order when a delivery is created ,
what are the configuration activities that needs to be carried out .
Thanks ,
KSR

Dear Friends,
I am also facing the same problem; I want the system to create a transfer order at the time of creation of an outbound delivery.
I have done customization as under:
Step 001
Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries > Maintain Output Determination Procedure
Step 002
On the screen, u201CProcedureu201D: Overview, choose the following:
Procedure     Description
V10000     Header Output
Step 003
On the screen, u201CControl datau201D: Overview, enter the following:
Usage     Application     Procedure     Step number
B     V2                     V10000     110
Counter     Condition Type     Requirement     Description
01     WMTA                     032                     Automatic TA
The system does not create a transfer order automatically.
May I request our learned friends to guide me?

Automatic creation of Transfer order for Picking and putaway

Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
Rahul

Hi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore

Automatic Creation of PO by workflow once PR is released.

Hi All,
Can anybody explain the details steps for creation of workflow template if PR is released then automatic creation of PO needs to be created with reference to PR.?
Thanks,
Ravi

You can take a look at standard Workflow WS20000075(PO). Regarding your requirement most probably you need to do some configuration. In SRM this is possible once a Shopping Cart is completed it can be converted to a PO.
Thanks
Arghadip

Automatic creation of rfq against pr reference?

dear mm experts,
i would like to know whether std sap - mm allows automatic creation of rfq against pr reference.
i have a requirement user creates prs for materials, and rfq have to have to generated/created automatically after pr is saved. is this possible with std sap spro settings
pl help
thanks in advance
srihari

If you refer the same document on the following link you see that RFQ is not automatically
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
What does their mean automatically is
using the assign and process you can create RFQ. but not like Auto PO using Me59n
Creating RFQs
To create RFQs, you must generate a basic list via Requisition ® Follow-on functions ® Assign + process.
From the basic list, you can flag a requisition for RFQ processing. Select a requisition and choose Edit ® Flag for RFQ ® With vendor or Without vendor.
Choose Goto ® Assignment overview to access the assignment overview screen. Position the cursor on the text Flagged for RFQ processing and choose Edit ® Process assignment.
A dialog box for the creation of RFQs appears.
Enter the deadline for submission of quotations and check other relevant data, such as the purchasing organization.
When you press ENTER, you will obtain an overview of the purchase requisitions that have been flagged for RFQ processing.
Select the items that are to be adopted in the RFQ.
Adopt the selected items in the RFQ.
u2013 If you wish to change the selected items before adopting them, choose Edit ® Selections ® Adopt + details. The relevant item detail screens will then appear, allowing you to make the desired changes.
u2013 To adopt the selected items without changes, choose Edit ® Selections ® Adopt.
The item overview for the RFQ to be created is displayed with the adopted items.
If you have flagged the requisition for RFQ processing without a vendor, or if you wish to issue RFQs to another vendor, assign the RFQ to a vendor and save the document.
Repeat this process for each vendor to whom the RFQ is to be issued.
For more information on the creation of RFQs, refer to the section Creating RFQs.

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

Functional module for automatic creation of pur requisition & pur order

hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar raju

Hi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore

Stop Automatic creation and confirmation of Transafer Order for a doc type

Hello All,
There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
Can u please provide the .steps involved for thie case.
Thanks
Chandrashekhar

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

Hello,
We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
Can someone throw more light on the customizing/BADI/enhancements etc required??
Thanks and Regards..

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

Automatic creation of requirement for extra consumption in COGI

Dear.
For a production order with a component totally consumed during the backflushing of CO11N I run a new confirmation. The component isnu2019t available , the confirmation is done and the system create for the component an error movement in COGI.
If I see MD04 for this component I donu2019t see any production order requirement for the extra consumption quantity in COGI.
But the planner need to know the quantity that remain to withdrawn.
Which is the reason for the missing automatic creation of requirement for extra consumption in COGI ?
Thanks.

Dear Cris,
Have you manually edited and input extra qty in CO11N
When backflush is activated and Full qty is confirmed
Then if you perform confirmation second time then form where system will again pick the component
Once again check in production order BOM over view and also in BOM what is the qty given
Can you eloborate more in detail what you have performed ( steps required )
Dear Siva,
Just correct me if i am wrong
Regards
Madhu
Edited by: K.Madhu Kumar on Sep 30, 2010 1:10 PM

Restricted automatic creation of PO in sales order

Hi Experts
When we create a sales order (VA01), we had customized the automatic creation of a Production order (CO01); but our client is asking us to limit this automatic creation to a certain characteristics of the material.
For example, we have to choose the colours (number and values), and for one colour, the production order donu2019t need to be created automatically.
Please can anyone help me to find any solution for this matter?
Thank you in advance
Hachim EL ALAMI

Dear Hachim,
if there is only one material for which you don't want production order to be created you can restrict that particular material by using material exclusion from Logistics screen - Sales and Distribution - Master Data - Products - Listing/Exclusion
and select condition type B001 for Exclusion and now if you try to enter this material in the sales order system will give you an error
OR
you can use listing condition type A001 in order to include only those materials for which you want production order to be created for them
Hope this will solve you purpose
Regards,
Sagar

Automatic creation of PO's from Requisitions

Hi
I'm trying to get a grasp of what's needed to automatically create approved PO's upon approval of a requisition.
There seems to be two ways to do it, a release program under a Contract Agreement, or using workflow with a Global BPA.
Under either method, would you need to create a Contract Agreement or Global BPA for each and every supplier? Is there any easier way to achieve this?
Thanks

To automatically created Approved PO's you will need the following
1. To create Standard PO's a Requisition will have to use a Quotation. This quotation can be attached to an ASL to default while creating a req
The Workflow "PO Create Documents" should have automatic creation allowed set to yes
2. To create Releases a Blanket PO must be attached to an ASL . The Workflow "PO Create Documents" should have automatic creation allowed set to yes
Please let me know if you have any questions
Thanks
Navin

Automatic creation of po during goods receipt

Dear all,
po has not been created, but while receiving the material i want automatic generation of po. i have some knowledge about it but it is not working. Can some one send detailed information. with navigation details. Tips that are posted on the sdn is not working.
Regards

Hi
Pl Make sure you have done following settings for the Automatic Creation of PO during GR:
1) In SPRO ---> Enterprise Structure ---> Assignment -
> Material Management ---> Assign Std. Purchase Org. to your Plant...
2) In Material Master -
> Purchasing View -
> Pl. Check. Automatic PO check Box   and Maintain Purchasing Group....
3)Create your Vendor for oyur Company Code and Std. Pur. Org. combination and in that Vendor Master -> Purchasing Data View--- > Pl. Check Auto. PO Check Box...
4)For your Vendor -Material Master - Plant -Std. Pur. Org combination Maintain valid Info record...
5)In OLMB ---> Goods Receipt -
> Automatic Creation of PO ---> for the M.Type:101 pl. check Auto PO check Box
6) In OLMB ---> Movement types ---> Copy,Delete, Check M.Types ---> Choose the M.Type:101   and go into Details -
> Then goto allowed Fields for M.Types for M.Type:101 ---> there for the M.Type:101   make the field   LIFNR as a Mandatoty field...
If you have done the above settings properly...then in MIGO ---> Choose Transaction GR and referance as Others
and do the GR....Make sure you are doing GR with M.Type:101....and yougive the Vendor's name during   GR....
Now If you save the GR ...automatically PO will be created...
this you can see it by displaying the MIGO Document..
Reward if useful
Regards
S.baskaran

Automatic creation of applicant activities

Similar Messages

Maybe you are looking for