Automatic creation of AUC (CWIP Asset) at the time of creation of IO

Hello Gurus,
When iam creating an investment internal order, system is not creating AUC(CWIP Asset),  I have created investment profile and entered the same in internal order, what could be the reason for this.
Please let me know the missing configuration.
Thanks & Regards,
Kapoor

Have you made the following settings:
Investment profile:
Sim. asset class xxxx
Indent value
OAYZ Determine Depreciation Areas in the Asset Class   assigned the default value to the asset clas for AUC.
In the most cases the AUC is created when you release the internal order

Similar Messages

  • Automatic creation AUC sub assets at the time of settlement

    Hi,
    I have created the investment profile,AUC asset class,Source structuce(Hard,Pave and Soft) and cost element group(Hard,Pave and soft) . Then assign these three source structure to Investment profile.
    I created WBS element under project and released the WBS.
    After that I posted the values against the WBS different cost element . At the time of AUC seetlement thru CJ88.I am getting Three AUC asset with Sub number -0(1000-0,1001-0 and 1002-0) automaticaly. But Business is expecting to settle automatically(1000-0(Hard),1000-1(Pave),1000-2(Soft) respectively.
    Is there any way to settle AUC sub asset wise(Eg: 1000-0, 1000-1 ans 1000-2)automatically.
    Please share your suggestion on this.
    Appreciate your help!
    Regards,
    Prakash Reddy.

    Hello VIrendra,
    I am trying to settle WBS to AUC settlement thru CJ88. In this case We need to settle WBS to  AUC sub number wise 0,1 and 2 respectively based on the cost element. Is there any settings required to create AUC asset sub number wise creation?
    Thanks& Regards,
    Prakash Reddy.

  • Different batch no in prod order at the time of creation of prod order

    Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

    Dear,
    Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
    Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
    Refer this thread,
    Re: Batch creation
    Please try and revert back.
    Regards,
    R.Brahmankar

  • Alert message is needed at the time of creation ,if it reaches ,the maximu

    DEAR SA EXPERTS,
    Can you please me that alert message is needed at the time of creation ,if it reaches ,the maximum stock level (Stock+level)
    Thanks
    Mohit

    Hi,
    Please refer the below links.
    Alert Message
    Re: Alert Message
    Hope it helps you.
    Thanks.

  • At the time of creation of POaccount assignment is coming mandatory

    Dear all;
    At the time of creation of PO system showing the msg that the  account assignment is mandatory for the material ,how to overcome this?
    Kindly suggest whre in material master record I can change settings for account assingment ,or the control is somewhere else.
    Regards;
    Joydeep Mukherjee

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Problem at the time of creation order

    Dear Gurus,
    facing update termination error at the time of creation/change the sales order..in development system
    after some analysis,  found one more error due to which above mention error is coming
    report run : "RMCSUTIC" : check utility logistic info system
    after running this report system giving error message "Unit O2 : No DDIC Information for source field OI0BW_ADQN - OIMSEHI1"
    but when but in production server it's working fine without error message
    kindly suggest some solution for the same
    Regards,

    No DDIC Information for source field
    You may have to check the following notes.  Take the help of your basis team.
    1)  542872
    2)  557683
    3)  579022
    4)  645136
    thanks
    G. Lakshmipathi

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Can the iPhone have settings profiles?  I want the settings of what apps are using the "call home" automatically set based on my location or the time of day.  Is this possible?

    Can the iPhone have settings profiles?  I want the settings of what apps are using the "call home" automatically set based on my location or the time of day.  Is this possible?  Of course the GPS location feature will need to be on in order for this to work.  But the idea here would be to optimize battery life by disabling the 'call home' requests of apps.  The settings profile should also support downloads as I would like to download and allow it when I am on WiFi but not so much when I am using my cellular data.

    No, this is not possible as the sandboxed nature of iOS would not allow any app to modify another app like that. Such a feature would have to be enabled by Apple as a part of iOS itself. You can submit feedback to Apple about the idea if you wish to.
    https://www.apple.com/feedback/

  • Automatic creation of BP relationship at the time of creation of BP

    When a user creates a new account using BP transaction we need to create a 'Has the responsible employee' relationship automatically. If we try to create the same on save ( Using function BUPR_RELATIONSHIP_CREATE in BAdI PARTNER_UPDATE ) it doesn't work as the account would not have got created at the time of save. Hence we took a different approach of trying to create the relationship when the user clicks on 'Relationship' button ( in portal it is 'Relationship' tab ). We couldn't find a suitable BAdI which would contain the details of the recently created account as its import parameter.  Is there any other approach we could use to solve this issue? Please let me know your ideas on the same.

    Hi,
    You can implement this functionality using the BDT.
    --> in the PAI event, update the relationships in memory using function BUB_BUPA_RELATIONS_MODIFY.
    For BDT use, take a look at the following thread:
    Re: How do I update custom fields in a partner when I save the record?
    Michael.

  • Ship to record not populated in the CDHDR table at the time of creation

    HI
    I have created the Ship to party in R/3 and automatically i couldnt found the customer number entry with Change object as " I " in the table CDHDR. but ideally all the master data creation entries will be written in the CDHDR table with " I ".
    Please help me out here.
    Helpful answers will be rewarded.
    Regards,
    Ram.

    In that case, try maintaining only the dates in that table and execute.  Once the data is populated, ensure that transaction code is XD01 and not XD02.  Moreover, I am not sure, system will show the creation time there.  May be you can try in KNA1 where also, you can see the creation date but not time.
    As an alternative, execute XD02 for that ship to party where from top menu bar, click on Environment => Account changes => All fields.  Again double click on "Entries", so that system will display the creation and changes made to that customer with date.  Double click on the first record so that system will show when that particular activity was taken place and at what time.
    thanks
    G. Lakshmipathi

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Default Header text comes in PO at the time of creation

    Hi Friends,
                   my problem is that a default Header text must come on the PO based on the user or purchasing group at the time Creation (In Transaction ME21N).
    Is there any user exits or badi for it. I have already searched for them but i have not got any thing. Please help me.
    Thanks for ur valuable answers

    yes i know that through copy control we can get default text but it is item level text instead of the header text.and other thing it does not depend on the user or purchasing group. I default header text that is populated imediately when user call ME21N. So is there any BADI or user exit for that.Please reply.
    Thanks for ur reply and valuable answers
    null

  • Problem in assets at the time of upload

    Hi All
    I have a problem.  In the month of Feb. 2009 we went for upload of assets from our previous company code to new company code..
    All the assets were uploaded through FB01( manually).
    The asset report got tallied with the GL balances in March 2009.
    But now problem arises with 4 assets that were uploaded in Feb . with other assets.. These 4 assets are the differences for the reconcilation in GL balances for the quarter closing June 2009. October 2009 and December 2009 with balance sheet balances( FS10N).
    There is no depreciation  deducted for these assets in the quarter ending June , Sept and dec. depreciation run... even the planned depreciation is not calculated in the asset history........
    The balances coming in the reports are ZERO for these four assets while there is actual balances in BALANCE SHEET for these assets........
    Please help  me and guide me to know how these assets can be picked up by the asset report further ho wdepreciation will be deducted  on these assets........
    Regards
    Ruby

    HI,
    i feel the depreciation key assigned to the master data must have been played about .... i suggest you to chek the customization for the depn key .
    regards
    sayeed

  • Problem during the  assets entryat the time of service sheet

    Sir,
    I will face the problem at the time of services sheet as per following information.
    Actuaally i implemented the busi. area as Dealer I Want capitalized that bur at the time of entery the
    the service sheet i faced the problem.
    problem:
    you cant post to this assets( Assets180 0blocked for acuisistions)
    procedure remove tha blocked indicator in the master record or post diff. assets
    regardinng this procedure  i wnat to detail procedure  or doc.

    done by call sercvice center facility

  • Will my phone automatically go one hour ahead tonight for the time change? Also, if I set my alarm will it go off at the time it's supposed to, or an hour later?

    I live in ny and was wondering if tonight with the time change, will my iPhone automatically change the time? Also, if my alarm is set to go off in the morning, will it go off an hour later, or at the time that its supposed to?

    On your iPhone, go to Settings > General > Date & Time.
    If you have Set Automatically selected, the date and time for your iPhone is set automtically based on the tower your iPhone is connected to with your cell phone carrier.
    The date and time will be changed automatically on your iPhone based on your carrier changing the date and time at the tower your iPhone is connected with.
    If the date and time is changed automatically on your iPhone, the alarm wiil go off at the selected time for the alarm. If you need to ensure you don't miss waking up at the designated time, I would use a backup alarm that is not based on the date and time being changed by your cell phone carrier.

Maybe you are looking for