Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Similar Messages

Mvt type 311

Dear All,
I have transfer material sloc to sloc using mvt type 311, our requirement is to control the mvt type.
can i assign release strategy to this time.
Thanks
Shital

There is no provision to assign Release Strategy to material Doc. However this can be restricted at Authorisation level for T code MB1B / MIGO_TR.
Regards
Bhavesh Mistry

Automatic creation of Notification using T-code IK11

Hi Gurus,
i got stuck in a requirement, where they want Automatic creation of notification using T-code IK11.
I am using EXIT IMRC0001.
Please guide me that with what logic i should go.
Thanks
Regards
VICKY
Moderator Message: Vague Question. Expecting others to do your work for you => Thread Locked.
Edited by: kishan P on May 12, 2011 12:35 PM

In the role give Authorization object P_ORIGIN for Infotype 0, 1 and 2. with Authorization level as R (read)
This will resolve your issue then no need to give sap_all authorization
Good Luck
- Ashish

Issue with Mvt type 311

Hi friends,
I have a issue with stock transfer from one storage location to another with transaction MB1B using movement type 311.
When ever we transfer stock for a material, it transfers from unrestricted to quality restricted stock. eg. if a trasfer from 0001 sloc to 0002 sloc, then it will transfer 0001 unrestricted to 0002 quality inspection.
Can plese some one tell me where these settings are maintained?
Thanks,
Rohit

Hello,
This is not the SAP Standard Practice,
While transfer of material from one storage location another stoarge location thorugh 311 movement type, the stock type should be same in both the storage locations.
you can directly transfer from Unrestricted 0001 storage location to 0002 Storage location (quality inspection), before that you should match both stock type , through respective movement type 321 or 322.
then you can transfer one storage location to another (stock type should be same)
Regards
Mahesh Naik.

Mvt type 311 posting - automatic dummy printout needs to be disabled

Hello Friends,
We have a custom program to post transfer postings. whenever 311 type GR documents are created , a dummpy printout occurs in the printer ( printer configures in user's profile ) .
I am not able to find the corresponding form associated with this. also , I need to deactivate this.
Please guide with some clues.
I tried searching the posts , Many are similar to my problem - but none of them solved my issue.
thanks
Raghu V

Hello Ramakrishna,
thanks for your inputs.
i have checked OMB5 - option 1 is marked for 311 movt. type . i guess removing this might stop trigerring the printout for all 311 movt. types .
but my question here is how to find which form is getting triggered ? because it contain junnk data and emptyr values in the printout.
also , In transaction : OMLV , i see that print code assigned is 02 for movt. type 311. whats the significance of this ?
many thanks,
Raghu V

Automatic Creation of Documents using Document Templates in UCM

Hi,
We need to cater following requirements in my project and we are using Oracle UCM 11g.
1. Can we create documents automatically using some document templates? i.e. Auto-generation of documents based on message input and templates.
2. Can we enter free text into some areas of the documents available in UCM repository? And can we enter that new text parts in to UCM library?
3. Can we automatically create printable pdfs in UCM?
Please guide me how I can achieve these functionality in UCM.
Regards,
Sunny

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Transfer posting from batch to batch using 309 or 311 issue

Hi Experts,
Need your help, I'm facing the following issue, I'm trying to transfer posting from batch to other batch using 309,
Using MIGO
the material, plant, storage location are the same but the batch number are different, I didn't get any message and when I save, there's nothing is changed, I checked the material document and found that the destination batch is same as source batch.
Using MB1B
the material, plant, storage location are the same but when I entered the source batch, the batch number is copied to the destination batch number and I got message M7104 "stock to be removed from storage same as stock to be placed into the storage" and I can't change the destination batch number.
Please advise how can I solve this issue or if there's any alternative way to transfer from batch to other by one step.
Regards,
Mohamed Mansour.

You can well use 309 movement type in MIGO or MB1B and also you can well change the receiving batch number during the transaction..
MB1B
MIGO
I think you can able to change the receiving batch.
What the status of receiving batch shows in MIGO or MB1B ?
Also check you field selection for movement type 311
Go to OMBW, double click on 311, then double click on Transfer Posting
It should be as optional entry.
Then try again MB1B.
Regards
Dev

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Bapi for MB1B using Mvt type 413 - 'E'

Hi Friends,
I am using BAPI_GOODSMVT_CREATE for MB1B,movement type 413 with 'E' (for goods transfer from Sales order to Sales Order). I need to know what are all the fields to be used for this requirement.
e.g. movement type, plant, stor loc, Sales order no,
material, batch, grid value, qty to be posted to another sales order, material, batch, grid value, qty.
Both Inv management and warehouse management to be updated. (After posting automatically the Transfer Order to be created.)
Anybody does the BAPI for this requirement, please send the code to me.
Thanks in advance
Shankar

If you are using valuated sales order stock with a 'S'tandard price for valuation for each sales order item, your transfer may be trying to write the price difference associated to a movement to a specific G/L account. The price for the same material under different sales orders with MTO can be caused by many reasons - lot size, changes to raw material prices etc.
If this G/L account is also a cost elements (i.e. defined in CO as a cost element_ it will need a cost object. You canuse OKBP to assign default cost objects for this and other variance/price difference accounts - or you may create a CO substitution rule.

Automatic Creation of Batch in Process Order Confirmation

Hi Guru,
What are settings required to set the batch creation automatic during the confirmation of the process order? The header material is semifinished and batch management is ticked in the material master. BOM has been created. In the present scenario, few
Regards,
Raja

Hi,
You can do that in T Code CORW.
For the required production scheduler select the batch creation for process order.
Also in the Assignment tab of the process order, there is a field for batch, next to it there is a Create button. Click that, you will get the batch number in that field.
Hope that helps.
Regards,
Rohit.
Added: I apologise, its not the Assignment tab in process order. It is Goods Receipt tab.
Edited by: Rohit Chauhan on Aug 3, 2009 9:42 AM

Automatic Creation of PO's - Output Types?

Our company is thinking about creating PO's automatically and we are stuck at the output determination phase.
The way the system is designed now, when buyers create PO's, they select Message Type NEU and then they have the option of picking either Print or Fax.
For Automatic PO's is there a way we can do this by assigning some materials to Output Type Print and some to Fax?
Perhaps by Purchasing Group(I tried this but I was just able to choose different printers).
Or Info Record?
Please advice.
Thanks

Hi
Please try to maintain the condition record in MN04 as per yr requirement.
Thanks/karthik

Automatic Creation of PR using 59

Hai,
I have created on PR 1200000585(Account category K & item category D).
Then converting(me59) this PR to PO.
While doing I am getting the following mesage "No suitable purchase requisition found)
I am not using any material, using only material text as "Consultant" in my PR.
With Regards,
Jaheer,Saudi Arabia.com

HI,
Prerequisites are
The system selects only those requisitions for automatic PO generation for which the indicator Automatic purchase order has been set for both the material and the vendor.
It can only generate purchase orders from requisitions to which a unique source of supply has already been assigned.
Refer this link
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
Optimised Purchasing - Automatic Generation of POs from Requisitions
Thanks & Regards,
Kiran

Had to restore a spread sheet...(Numbers ) lost the ability of automatic 're call'. Used to type in a name...and it would automatically pop up....now...nothing

reconciling a monthly bank statement...when entering a repeating vendor, it used to automatically would 'pop up' for selection.....now NOTHING pops up
I just upgraded to Maverick, 10.9......lost the entire document.....went to Time Machine and restored an earlier back up.....had a problem with the 'decimals' in the Balance column........Apple Tech Support fixed it.......just tried using the document.....and experiienced THIS issue
Thanks
Shelgor

Hi Shelgor,
Autocompletion of previous entries in a column isn't one of the features in Numbers 3.0.
It seems that the designers are emphasizing the pop-up cell format instead, which accomplishes a similar purpose -- entry of repeating values into a column without having to retype them. Pop-ups are very efficient on a touch interface (iPad, iPhone), which is probably why they are being emphasized over auto-completion, which requires some typing each time.
Unfortunately they neglected to include a keyboard shortcut for pop-ups on the Mac. In the old Numbers you could just hit the spacebar and a list would pop up. Now you have to use the trackpad/mouse.
Anyway, either you can continue using your old Numbers (it's in a folder within Applications) or you can try formatting your cells as pop-ups and see if that works for you. I actually prefer pop-ups, because it prevents me from mistyping the beginning of some previous entry.
SG

Error Message when doing a Stock transffer using Mvt Type 309 using MIGO

Hi Team,
I am getting an error message M7-441 "Selection by multiple account assignment was not restricted", when doing a stock transfer.
I am not able to understand the exact issue here, any help is appreciated.
Regards
Raj

M7441 seems to be a new error message which came with EHP4
I can only see that it is used in MB51 report (do you search for material documents in MIGO when you get this error?)
according to the coding in my system this is just a warning message, not an error message, hence you could continue by cklicking the okay icon.

Automatic creation of Purchase order not possible for 103 mvt type

Hi,
If i could configure "create p.o automatically", while doing G.R for mvt type 101,
why cannot i do the same with 103 mvt type.
I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
Which entry controls the above my requirement?
Please advise .
Thank you.

Hi,
These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

Automatic creation of Batch using mvt type 311

Similar Messages

Maybe you are looking for