Automatic Creation of Equipment Master
Hi Experts
I have gone through lot of discussion available on forum but still Asset Equipment link is not working.
I would like to create Equipment when I create Asset.
I have done below settings.
1) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
here i have assigned equipment category and object type and selected direct synchronization after saving in Create Equipment
2) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Assign Master Data Fields of Assets and Equipment
here i have assigned fields here.
When I create asset and save its only creating assets and even not getting error message . I have also checked screen layout and equipment is optional and not seems to be a problem.
To see whether synchronization functionality works I have done settings from Equipment to Asset creation and it's working but that's not the requirement.
I have changed the settings back to the 1) above to create equipment when asset is being created and it's not working.
So to summaries when I create Asset - No equipment is created but if i change settings other way then asset is getting created from equipment.
My question is what settings are missing to create Equipment when I create Assets?
Is there any settings required from equipment side? any specific requirement on equipment category and object type?
Thank you.
Hi,
Simple,
1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
3. Select tab page Allocations and click on position group on tab pages.
4. Click on new entries and insert 'S0013', save.
after doing this you will be able to find 'equipment' box under allocation.
and regarding asset synchronization..
Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
In this step, under the box 'Edit Asset Master Record' mention,
Create Equipment 2 Direct Synchronization after saving
Change Equipment 2 Direct Synchronization after saving
Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
After doing this you should be able to get equipment created automatically..
Regards,
Sayujya
Similar Messages
-
FI-AA and the Automatic Creation of Equipment Master Records
Our client is currently on SAP R/3 4.7E and per SAP Notes 176056, 370884, 361520, releases above 4.6B should be able to automatically create an equipment resord master record from within FI-AA. Configuration shows that undaer FI-AA Master Data the integration should be possible, but we have tested and cannot get it to work. No equipment record is ever created.
Has anyone been successful in performing this function?
What are we missing?
Thank You.
RuthieHi,
Simple,
1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
3. Select tab page Allocations and click on position group on tab pages.
4. Click on new entries and insert 'S0013', save.
after doing this you will be able to find 'equipment' box under allocation.
and regarding asset synchronization..
Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
In this step, under the box 'Edit Asset Master Record' mention,
Create Equipment 2 Direct Synchronization after saving
Change Equipment 2 Direct Synchronization after saving
Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
After doing this you should be able to get equipment created automatically..
Regards,
Sayujya -
Automatic creation of equipment after goods receipt
Hi SAP experts,
I need help to find where in SPRO do I turn off/on the automatic creation of equipment once a GR is done for serialised equipment.
Also, is it a PM function or MM?
Thank you
Emanuelhi
SPRO>PM>Master data in PM >Technical objects->Define Serial No Profile -->here goto ur serializing no profile --> goto serializing procedure and chek in MMSL procedure and change the EqR value to 1 .
regards
pushpa -
Bapi for creation of equipment master
hi friends ,
I have to made a BDC program for creation of equipment master .
for that I am using bapi i.e. ' BAPI_EQUI_CREATE '.
I had matched the fields of transaction IE01 but in the additinal data part i could not able to map 'Partner' fields .
pls some body can guide what should i do for it.Hi Das,
If u r going to create equipment no against this Bapi BAPI_EQUI_CREATE"
then u need to pass material no, Equipment type, Serial No. there is no need to give partner no .
If its good, then plz give point. -
Creation of equipment master automatically with grn.
H gurus
Is there any way to creat automatically equipment master while doing GRN.?
This is cliants requirement.
Regards,hi
you can create equipment master record automatically provided you have assigned serial no profile to the material master and the serialization procedure which allows the equipment master to be created automatically
regards
thyagarajan -
Creation of Equipment master throught Emigall
Hi Fritz,
Good Day!
I need to create a Emigall object for Equipment Master, which we can't
handle in LSMW because of the volume of data, I am using the same object as
used for Device of ISU.
The object name is EQUIPMENT in company ZISU. I have used those fileds only
which are required to create a equipmetn master in STW. While uploading the
data I am getting an error " Enter a valid device category" which is a
device category of ISU.
Can we do this or do we need to create some other customization in this case
Thanks for your support Fritz.
Regards,
Robert.Robert,
I did some research. Please confirm you are referring to the data as copied below from the documentation.
Kind regards,
Fritz
Definition
Partners (business partners) are internal and/or external organizational units. For example, internal partners can be logistics and sales departments that perform services. External partners can be customers as service recipients and vendors as supporting service providers. A partner can be a natural or a legal entity. You can use partners in CS- and PM processing.
The following partner types are delivered with the Standard System:
Customer
Contact person
Vendor
User
Personnel number
Organizational unit
Position
Partner Function
You define partner functions in Customizing for Plant Maintenance and Customer Service. They are freely definable and always refer to a partner type. Standard functions exist (for example, goods recipient) and you can also define your own functions.
Partner Determination Procedure
The partner determination procedure is a grouping of partner functions. It specifies which partner functions are permitted or must always be specified for a particular business transaction (for example, for the processing of a service or maintenance order). In Customizing you define the partner determination procedure and assign partner functions to it. If functions are assigned to the partner determination procedure, you can assign the partner determination procedure to an object (for example, to a notification type).
Integration
You can assign partners to the following objects: Functional location and equipment -
BAPI for PR Creation and Equipment master updation
Hi Gurus ,
Please provide me the function module (BAPI) for the following.
1. Create Purchase Requisition
2. Update/Change Equipment master(Iq02)
Thanks
TausifHi Tausifur,
You can goto Tcode BAPI and find all the relevant BAPIs that you want. This will help you in the future.
Cheers
Keshav -
Automatic creation of Material Master at the time raising the PO !!!
Hello All,
I am stuck in a scenario of our client which should be implemented (or mapped) in SAP.
Scenario: At the time of creating the PO (in there legacy system -in house developed) they can choose the items from the existing master data or/and they can also add a new item (which is not present in the master data records at the time of creating the PO).
Now as soon as the system realise that a new item is inserted into the PO, it will create that item record automatically in the backend (database) and the master data will be present from there on.
The items they are dealing with are all fashion accessories and they generate order on the following basis:
1. Demand of particular item in market.
2. List of items provided by the vendor.
3. Based on the requirement in there outlets.
So for them its very difficult to fix there master data records, as it can be changed daily or monthly as per the market conditions. At the same time every time they order, its almost around 100 different items (some time 80 of them are new) in a single PO so they cannot create 80 records manually each time.
These items are not consumable material so obviously they are maintaining the stock for them. They are also not going to use IS Retail.
I am not at all sure how can we map this particular practice in SAP, it would be really appreciated if any one could help me on this problem.
Please let me know if you need any other details from my side.Hi,
As you have two different systems one in house developed and another SAP, and the PO creation part starts from Legasy system which creats the PO in SAP, you can do some development as per below
1: While Passing the details from legasy to SAP, use two columns in legasy one will contain the Material Code of ECC (for laready exist material ) and another for deescription of material.
2: In case material is new for which there is no material master in ECC pass only description from legasy systems.
3:While getting triggred from Legasy to ECC to create the PO, first check whehter all the material code exists or not in ECC.
4:If some material are not created (only description present) for those material first create the Material Code using BAPI 'BAPI_MATERIAL_SAVEDATA'.
5: Aftre creation of Material code create the PO using BAPI ' BAPI_PO_CREATE1'.
6:For the new created material , trnasfre the master record from ECC to Legasy systemso that next time user can see that material in your legasy system.
Regards,
Zafar -
Automatic Creation of Scheduled Master Record for Scheduled Master Data
Hi experts,
We know that MRU and Portion are Scheduled master data but Scheduled master record is transactional data. So it is obvious that we have to generate scheduled master record in every server wher we transport the master data manually. And we can generate records for a particular time span and after that time we have to generate the records again.
All I want to know that whether it is possible to get all the records generated automatically after certain period.
Thanks,
ArghyaHi,
Scheduled records do NOT get created automatically , altleast not by any sort of configuration, in case you are looking for it.
Your can always create custom program to do so, but it isn't worth the effort.
You can create records for upto 7yrs ( do need to check but definitely for a period long enough)
Hope that helps!!! -
Automatic creation of asset maste
I want to know how to configure this:
when I created a project ,an asset master would be automatically created.
best regardsIM- PS ingetration is based on Investment profile. When Release status is set on Investment profile carrying WBS based on setting system will create AUC. Reqeust you to search in forum / Read SAP Help on IM ; you will get relevant information.
With Regards
Nitin P. -
Asset Auto creation of Equipment Master - Synchronization
Hello Experts
If I decide to use Workflow "then system does not synchronize the master data, instead it triggers a workflow".
What settings needs to be done for workflow to be work other than available in FI-AA? Is this Programming?
Thanks in advanceClosing and opening in Fianacial Forum
-
Restrict Equipment Master (with serial numbers) creation
Hello All,
I am faced with an issue where the client will be using Serial Numbers for 2 sets of materials. I have assigned a Serial Number profile to these materials in Material Master.
I am able to create equipment master data for these materials with serial numbers without any issue.
However, I am also able to create equipment master data (with serial numbers) for materials to which I have not assigned a Serial Number profile.
Is there a way to restrict the creation of equipment master data (with serial numbers) to only those material that have a Serial Number profile assigned in material master data...?
Thanks
JensiThanks for the reply Amuthan.
Unlike what you wrote in the reply, the system does allow me to create/save a equipment number for those serial numbers that I assign to materials that do not have a serial number profile.
Is there any validation, any check or something of that sort that I can activate so that the system will prevent assignment of serial numbers (and in turn creation of equipment master data) for those materials which do not have a serial number profile assigned in the material master data?
Thanks
Jensi -
Creation of equipment using asset
Dear Experts,
I am very new to SAP PM. I have one query regarding the creation of equipment master automatically by asset master scenario is as below..
I have created one asset master in which asset quantities are 10 in one asset master, I have synchronize asset master with equipment master in FI configuration. I am getting only one equipment master for that asset master but I want maintain above mentioned 10 asset separately so I want 10 seperate equipment for same.. Please tell me how can do this
Thanx .
Regards,
ABC PMThanx Yawar,
I have activated that setting & I am getting one equipment for one asset master. but in my scenario in one asset master there are 10 quantities of asset & to maintained them separately I want to make 10 seperate equipment master.. so hw can I do that???
Regards,
Parag. -
Problem in creating equipment master using FM /ISDFPS/ETUPS_EQUI_CREATE
hi all,
i am trying to create an equipment master using the FM mentioned above .. after the FM gets executed there is no status/error/information message.. i have given all the values to the FM which we normally give to IE01 transaction for creation of equipment master...
please advice on this ...
thanks a ton.....Hi Shiva
Did you got to know how to use this FM, I got a requirement where I need to build a interface to update and create equipments. I also tried using this but got simillar problem as you mentioned. Please let me know if you found any alternative for this?
Thanks
Harkamal -
Automatic creation of an equipment using the serial number
Dear All,
I know that we can configure the automatic creation of an equipment while creating a serial number. I would like to know if some of you have details on how the creation is performed. In particular:
I saw on an other thread that the descirption, serial number are populated on the equipment from the material master data, but is there any possibility to classify the equipment with the classification assigned to the material master data ?
Thanks,
Kind regards,
GuillaumeHi,
Try this link:http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0244299-278d-2e10-4fac-e28fffb12588
James Prabaharan
Maybe you are looking for
-
Error 11556 when trying to log in to Itunes Store
When I try to log in to the Itunes store I get the error message 11556. Version OS: Mac OS X 10.7.1 Version Itunes: 10.4.1 Also when (whithout being signed in) I can not go to th movie, music, tv, etc... sections in Itunes. How can I solve this? Thij
-
ITunes purchases not showing up on new computer
I recently switched to a new computer but none of my iTunes purchases are showing up in iTunes on my new computer. I thought I'd backed up everything but I guess it didn't work so now does that mean I have to repurchase all of my songs that are purch
-
Oracle self study - satisfy requirement for PerformanceTuning Cert Exp?
If I was to buy the "Oracle Database 11g: Performance Tuning" self study CD does that satisfy the training requirement for cert "Oracle Database 11g Performance Tuning Certified Expert"? Or do I have to take an instructor led course? It appears that
-
Hi all, I m using Portal version 10.1.4 and developing JSR168 Portlet using JDeveloper 10.1.2.1.0 (Build 1913). There is a edit mode in my portlet and i have done entry for this mode in portlet.xml and also implemented doEdit() method. inside doEdit(
-
I downloaded iPhoto update and now it doesn't work
How do I fix iPhoto after an unsuccessful update? Today I downloaded the iPhoto update from the App store. When I try to open the program it quits unexpectedly. When I try to open it again it says it has dectected inconsistencies in my library. I cli