Automatic Creation of Maintenance Plan, Measurement plan

Hi Pal
Business : The equipments are procuring for the purpose of supplying into customers.It is installed (via sales delevery) at customer location as requirement. From the installation date rental will start and periodic visit is applicable after every 3 months. The technician will capture some reading In initail installation time, periodic maintenance time.
Requirement : The equipment will be created automatically thro serial no when doing the GR(Its possible) . Automatic creation of Maintenance Plan for the equipment for 3 month frequency, 70% call horizon, early and late completion of 100%. Additionally the scedhule start date need to pick it from the notification end date of its respective equipment.Also measurement points should be generated in automatic way (Its fixed& common for all equipments).
Is there any possiblity to complete this requirement? Please help me and suggest.
Regards
Thenna

There is no suitable BAPI available to create Maintenance plan.
Try for BDC.

Similar Messages

Automatic creation of production orders via planned orders

Hello experts!
is there a way via customizing to trigger an automatic creation of production order from a planned order when the planned order finished date is within the next week?
thanks

David,
Not in customizing.
Most people create a job step after the RMMRP000 program step in their MRP job, using program PPBICO40. Dynamic date range is available as a selection criteria against the opening date, which is the standard criteria for selecting and converting planned orders (not finish date).
Best Regards,
DB49

Automatic creation of maintenance order before expiry of warranty

Hi All,
I have a requirement to generate maintenance order automatically when a particular assets warranty is soon to expire.
I am aware of the option to get pop-up box while creating maintenance order if the equipment is under, but this wll not meet my requirement.
Could you please provide your comments.
-Vasanth

Hi,
you can go for general preventive maintenance plan creation. whatever your requirement is, you can create relevent task list, assign your strategy of maintenance for that asset after its warranty is over and so on up to a particular period, say 365 days.
Then create strategy plan (IP42) and schedule it in such a way that it generate its first call object by the end of warranty and keep on generating as per your requiremnts. schedule it (IP 10), and you will get call objects (notification or order) as per your requirements.
It is an standard SAP practice, hopw it will work for you, without any enhancements.
Regards,
Lucky.

Automatic creation of Maintenance Order

Hi,
I have created the maintenance plan. I have scheduled the plan. How can the maintenance order get created automatically as it is not possible for the users to check on daily basis.
Thanks in advance.
Regards,
Maheswaran

Maheswaran,
In IP30,
Go to menu path Program -> Execute in background
Make the necessary printer settings in the Background Print Parameters popup screen and t press the green tick (or hit ENTER)
Do the following in the Start Time screen: (1)Click the Date/Time button and enter the start date and start time for the job. (2)
Click the Period Values button (bottom of the screen) and click the Weekly setting then save to exit popup. (3) Click the save button in the Start Time screen
Go to TCode SM37 and check that the system has created a job called RISTRA20. Also check the frequency by double-clicking the job name.
Have you done up to this step?
Babu

Automatic Creation of Maintenance Order from Notification

Hello Eperts,
I need an opinion. I have a scenario where i am required to create a maintenance order automatically from a notification. I want to know the best way of doing it. Can it be done by configuration in the node> Notification processing>Define follow up actions for tasks, where based on a open status of task an order can be automatically created.
Please let me know the best way to do it.
Regards,
Boby Mathew

Hi Pete,
Thanks a lot for the reply. Based on your experience can you tell me which function module can be used to create an order if an open task exists in the notifictaion. What I am trying to do is,
in Customization >Plant Maintenance & Customer service>Maint & Ser Processing>Maintenance & Service Notifications>Notification Processing>Additional function>Define follow-up actions for tasks;
Here I am creating a follow-up action for a task as create order and thought of assigning an order create function module ALM_ME_ORDER_CREATE with modifying the subrc parameters with some return values. Can it be done this way? I am asking because I am not very sure as to what is the best way to acieve it. I want to achieve this min minimum development.
Please explain in detail.
Thanks & Regards,
Boby Mathew

IO automatic creation of plan settlement rule according to actual settlemen

Hi guys,
does anybody know, if it is possible to create mass wise plan settlement rules on internal orders according to actual settlement rule? Sounds like a normal requirement, but I did not find anything.
Automatic creation of settlement rule seems only to work like (KSR1_ORC in customizing):
01     No autom. calculation / manual maintenance
02     Settlement to a profitability segment
03     Settlement to a requesting cost center
04     Settlement to a responsible cost center
05     Settlement to sales order
06     Settlement to a WBS element
08     Settlement rule from assigned WBS element
30     Settlement on Acct Assgnmnt from CRM or Errors
31     Settlement on Acct Assgnment from CRM or on Event
35     Settlement on Receiver from Accounting Indicator
but nothing like "automatic on basis actual settlement rule"....
Note: we can not use any of the above rules for plan, since also actual has to be entered manually.
br
Bjoern

Hi
See if you can use exit COOM0003 for auto creation of settlement rules.. Here you can write your own logic
br, Ajay M

Automatic Creation of Planned Order in PPDS Horizon

Dear Experts,
Kindly answer my following query.
I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
Best Regards
Rinju
Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

Dear Rinju,
Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
Sree

Making task list field mandatory in creation of maintenance plan?

Dear All,
I need your help in configuration of Making task list field mandatory in creation of maintenance plan. I checked with sceen variant config but that also not giving me any option to make the field mandatory.
Is there any note or user exit for it?
Regards,
Kaushal Rai

Dear,
Pls check the exit IPRM0004:Maintenance plan / item: Customer check for time "SAVE".
Regards
Sunil

BAPI for Creation of Maintenance Plan (TCode - IP01)

Hello
Kindly help me with the BAPI for Creation of Maintenance Plan (TCode - IP01)
Thanks and Regards
Avishek

Hi
Check Tcode: IBIP. and LSMW method and below link it may be helpful.
[link|Re: LSMW for uploading equipment.]
Thanks,
Asit Purbey.

CRM - Success Measure Planning

Hi all,
We have set up success measure planning in our CRM7.0 system. This is based upon layouts created in BPS.
In CRM when starting to do some planning on a campaign, the users select the success measure and unit of measure. Then they press <Apply> and start planning.
We have a request from the users to be able to default the value for unit of measure from the success measure. E.g. I am selecting success measure xx, and the system automatically knows, that this success measures uses "%".
Is this possible to implement ?
KR Mikkel

Hi,
If somewhere you are maintaining the relationship between success measure and corresponding Unit of measure then you can do that.
You can write your custom code to save the data into the back end cubes where you modify the characteristics value of Unit of measure based on the value of Success Measure..
I'm not very familiar with CRM with BPS functionality.. But in normal BPS layouts you can attach a planning function which executes "after data in changed" in layouts .
The logic for planning function should be to modify the buffer data ( unit of measure) based on Success Measure..
Thanks
Pratyush

Automatic Creation of Settlement Rule for Maintenance Order

Hi,
While doing TECO for Maintenance Order, its asking for Settlement Rule. IF I click settlement rule, message is coming as Maintain Settlement Profile with options like With Default, Without Default & Cancel.
I have maintained the Cost center in Equipment Master. Also I maintained Cost Center as Default Settlement receiver.
Also I have gone through setting in Automatic Creation of Settlement Rule under Controlling Category.
But I couldnt understand that. Can you please tell what are the steps to be done?
Regards,
Maheswaran.

Hi,
Please check the indicatorsin Actual cost/cost sales and Valid recevivers in settlement profile.
If for cost center : 1 settlement optional is maintained in valid recevivers and also for order
and in actual cost/ cost sales: indicator to be settled in full is selected.
Also check Allocation structure too if you have assigned the valid allocation structure.
**check if you have assigned the valid settlement profile to order types.
*****Most important after doing all these settings you need to create new order. for same order you will not get the automatic settlement rule
Hope this helps.
Regards,
PMAddi

Creation of SNP PDS using planned delivery time

Dear Experts,
How do i control creation of PDS because of operaion generated from planned delivery time,although planed delivery ime is zero.
the scenario is as follows:
Material :XXXXX
Planned Delivery time
Procurement Type:E
Plant:XXXX
in transaction /sapapo/curto_simu: there are two PDS displayed with PDS usage as PDS for Supply Network Planning(SNP)
the first one is because of operation generated fromm planned delivery time,output qty is the same a s that maintained as base qty in BOM and mode is blank,activity field is even blank.
the other PDS is created because of the valid production version in R/3.
Thanks in advance
Amrish

Hi Dutta,
Thanx for a quick revert.
Yes we are using reciepe and we have a valid PDS being generated because of Production Version.
The problem lies with the creation of other PDS from planned delivery time whereinplanned delivery time is zero.I want a resolution so as the system doesnot create thses PDS which are invalid in nature.
These invalid PDS are hamperring result out of SNp optimizer for the reason these are considered in the input log of optimizer.
Regards,
Amrish

HT201238 My account was not automatically upgraded to an new annual plan, I got it one year ago and I got a message saying my Icloud storage was full and I that I only had 5gb free. What can I do ?

My account was not automatically upgraded to an new annual plan, I got it one year ago and I got a message saying my Icloud storage was full and I that I only had 5gb free. What can I do ?

Thanks Winston, thats the first thing I wanted to do but I dont see any Annual Plan (like I had), only monthly plans, and they said that as I got a Storage Plan before September 2014 I would be "automatically" updgraded to a new annual plan with reduced pricing. Dont know how I can get it now.

How to compute Maintenance Plan's Plan Date

Dear Gurus,
I would like to request help from you. I have a problem wherein I would like to know how is the Maintenance Plan's Plan Date is computed.
Below is the parameters of the Maintenance Plan:
cycle = 1500
offset = 1478
annual estimate = 5070
first meas reading = 22.5
Start of cycle is = Jun 16, 2011
The plan date computed is = Sept 7, 2011
Please let me know if there are other information needed.
I hope you can share your knowledge on my problem. Thank you.

Hi,
Please note that for Plant date calculate in Counter Based Plans system takes the below into preference for calculation :-
1. Start of Counter reading value
2. Date of Last counter reading udpate ..
If you maintain offset then system first plans the offset then starts the cycle
If ur annual estimate is 5070 , if scheduling is done by time then daily activity is 5070/365 = 13.89 round to 14
Now if your start of counter reading value is 0KM
And if your date of last counter reading is :- 2/3/2012
Then your first planned date would be based on the offset :- 1478 -22.5 = 1455.5 /daily activity =1455.5/14 =104days
So counting 104days from 2/3/2012 you would getting your First Plan date ..
If u put call horizon as 100% then it will be in HOLD status
regards
giri

Define dateline category during maintenance of billing plan type

Hi, I am in the midst of setting up the SD configuration in my current system from scratch and this is the error message that I have encountered, "Define dateline category during maintenance of billing plan type". Basically, what I have done is to create a contract using tcode 'VA41'. This error happened on the second screen after inserting contract type, sales org, distribution channel and division. any guru out there, pls advise. Thanks!!!
Regards
Andy

Hi!! Andy,
Dateline category controls data such as the billing block and the billing rule at the billing date level of the billing plan.
We assign a date category to billing plan in t.code OVBJ. check the assignment, make them if neccessary.
Hope this will solve your problem.
Regards,
PATHIK
Dear Andy,
Please check & maintain the enteries in t.code OVKK.
Do give your feedback.
Regards,
PATHIK
Message was edited by:
Pathik Pandya

Automatic Creation of Maintenance Plan, Measurement plan

Similar Messages

Maybe you are looking for