Automatic determination of Door in TU and further process

Hi
I am working with a POSC scenario for inbound process. unloading+packing+putaway
EWM ID has got door and Goods Movement bin determined automatically through-- door determination setting and bin assignment to the door setting respectively.
Also the staging area details are determined using /SCWM/STADET_IN
1. when I assign this ID to a new TU which has been checked-in, why doesn't the system automatically refer to the Door in ID and assign it to the TU? OR it has to be done manually only?
2. Further, If I assign the door manually and dock the TU to the the door determined in ID, can I have my system configured to create the Unloading WTs automatically?
In my case, it is not happening. Is it achievable? if yes, how?
When i try /SCWM/UNLOAD to do manually Create Unloading WTs(complex), it throws an error that.
"No entry found for process-oriented storage control for <WH no> + <First ext Step of POSC>" I could not find any issue with POSC setting.
In this situation, if i do a GR in the same screen, GR is completed and unloading task is created.
The unloading WT created has the destination data of the staging area, but the source bin data is blank.
3.No able to understand ..why WT is created only after GR and why the source bin data(i.e.door bin) is not available unloading WT ?
if i confirm this WT, all the further POSC steps are working perfectly.
N.B. yard mgmt is not active.
Need help for the above 3 issues.
Thanks.

Hi Suraj,
For automatic unloading WTs, i tried to ind the actions under /SCWM/TU action profile.
I could get
/SCWM/SR_TU_HU_TO_CREATE, Create Loading WTs for HUs of the Corresponding Deliveries
but I am not sure whether it is correct for UNloading WTs also. I could not find any other for Unloading process. i proceeded with the same.
further to define the condition technique for action for S& R, I checked below nodes.
screen1
but could not do anything here.
so proceeded with actions under delivery processing in IMG as below.
screen2
Using above spro, I proceeded with condition technique process with all the further setup. for action /SCWM/SR_TU_HU_TO_CREATE
While maintaining condition records using
/SCWM/DLVPPFC - Maintain Condition Records for PPF Schedule Conditions
I could not use action /SCWM/SR_TU_HU_TO_CREATE..
so I want to know whether condition record maintaining for concerned process is using /SCWM/DLVPPFC or something else.
and whether the IMG nodes used for maintaining condition technique setup for action /SCWM/SR_TU_HU_TO_CREATE are correct ones
I want to setup a scenario like when TUs status changes to Docked at Door, system should automatically create Unloading tasks from Door bin to Staging area.
Thanks,

Similar Messages

Automatic determination of Sales Office and Sales Group in a Transaction

Hi CRM gurus,
I was able to perform automatic determination of Sales Org, Division, and Distribution Chanell (Org determination), but still need to do the Sales Office and Sales Sales Group part.
I tried to do this with the Sales Rep in my Lead and Opportunity Transactions. I had 'employee' assigned to the Sales Group in the Org Model, and selected the same BP as Sales Rep in the Transaction, but it did not help. I'll appreciate if you could share your thoughts.
Thanks,
-Pras

Hi Pras
If there is only one org unit found and this one org unit contains only one sales office / one sales group then it should be filled in automatically. Be sure that they are part of the org profile and determination rule.
If you want to restrict the determination which was found automatically look in this thread ORG.determination - there is a reference to the code where the found org units are displayed and where you can modify the selection.
Regards, Kai

Automatic determination of supply sources

Hi,
Automatic determination of supply sources
During the sourcing process, the system selects all sources of supply that are assigned to the product category of a contract item or a supplier list entry. If no source of supply can be selected from the product category, the next superordinate product category level in the product category hierarchy is used.
Can somebody throw some light on last statement:
"If no source of supply can be selected from the product category, the next superordinate product category level in the product category hierarchy is used."
Thanks And Regards,
KK.

KK. Please clarify again.
do you have hierarchy contracts or you uploaded locally a product category hierarchy in srm server ?
always system assign appropriate product category w.r.t sc free text item product category if only one product category contract or system shows to the requestor what are the appropriate contracts contracts applicable to the sc produc category.
if the system dont propose it, it is not relavant to sc product category.
or if you want assign any contract means you can give control to buyer in the cockpit or you can forcily assign any contract by enhancement.
muthu

Automatically determine the staging area and door

Hello Gurus,
How to automatically determine the staging area and door ? and where to configure it?
thanks very much!

Hi zhang
Material staging areas and doors are related to Warehouse management.
First of all assign WM to your storage location
Doors
This is the place where the goods come to the warehouse or leave from the warehouse
The use of doors is to pick and putaway process in the warehouse.
You can also assign the doors to the staging areas as goods receiving and shipping points
Material staging areas
This is an organizational unit that is assigned to the warehouse number. It is used to organize the goods flow in the warehouse
The use of the material staging areas is that , they are used for interim storage of goods in the warehouse
Staging areas can be defined for other purposes like goods receipt and goods issues
Regards
Srinath

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

Automatic determination support team based on own specs?

Hi,
Rule 13200137 to automatically determines a support team using some standard specs such as:
SAP Component
Catalog Subject
Category
Code Subject
Subject Code Group
Sold-ToParty Country
Transaction Number
Priority
etc...
how can I add other specs? We need to determine the support team based on data specified in the business partner, ie postal code. In other words, our support team depends more on geographical specs, than SAP componenents.
How can I add other specs in this rule? The function CRM_DNO_READ_PARTNER_WFRULE seems quire hard coded, so I was wondering how to do this?
thanks a million,
regards,
maggie

Hi dolores
I have configured service desk and determination of support message team,
Users can change status of service desk message trough B_USERSTAT Authorization object if the Actions are available regarding the ticket status
I like to set conditions, sou2026 if service message are assigned to BASIS TEAM only this group must change service message status or edit service message data
Thereu2019s any way to do this trough authorization objects?? B_USERST_T maybe ? combination of B_USERSTAT & B_USERST_T (activation) ?? Status profiles & Authorization key & transactions types, actions profiles??
Best Regards

Automatic determination of WBS element in MIGO

Dear Friends,
I have a requirement as below:
When we do reservation for a particular WBS element and do goods issue for a different WBS element, system is not giving any error message.
We want to configure automatic determination of WBS element in MIGO_GI from Reservation and the WBS field should be disabled for editing while doing Goods Issue. Please suggest on the required configurations.
Regards,
Deepa

I'm totally agree with Pete.
This info can accelerate search and development
IQSM0007 Customer exit for goods movements
This customer exit is used to transfer the document data for a goods movement into serial number management. This involves:
The complete goods document (transfer table S7_TAB_MSEG, structure MSEG),
The purchase order history (transfer table S7_TAB_EKBE, structure EKBE).
The customer exit is called as soon as the document is saved. This means that at this moment in time the document data can be placed in the global memory of function group XQSM, where it is then available when the serial numbers in the document are saved immediately afterwards.
Access to the document data (placed in the global memory of IE01) is performed in customer exit EXIT_SAPLIE01_005, which can be activated using customer exit IQSM0005.
Certain document data can now be copied into the master data of the serial numbers.
Example
You want to copy the goods recipient from the material document and the value from the purchase order history into the serial number.
Goods movement
You activate the customer exit EXIT_SAPLIE01_007 so that you can prepare the required information from the goods document and the purchase order history. You can read additional data (for example, from the purchase order) where necessary.
Posting
You activate the customer exit EXIT_SAPLIE01_005. The data prepared with user exit EXIT_SAPLIE01_007 is available here (for example, goods recipient or purchase order value). This data can be copied into the master data of the serial numbers.

Automatic determination of billing date on order related billing

Dear all,
Some background:
We are using resource related billing: create standing sales order with WBS as reference.
Costs are posted to the WBS (serves as a bucket to collect costs).
Whenever needed, the costs on the WBS are billed. This is done via transaction DP91, creating a billing request for the standing sales order which generates a new sales order which takes the amount from the WBS element. This sales order can then be billed.
In other words: Each period, the standing sales order can be billed (based on the WBS element it contains) in a new sales order.
Problem:
The billing date is derived from the 'requested delivery date' on the sales order.
We would like to have by default proposed by the system as billing date: the date when the (2nd) sales order and/or billing document is generated. So either date of billing should be the billing date or the requested delivery date (which will then automatically determine the billing date)
How can this be achieved?
What I tried:
1). I have ticket the flag "Propose delivery date", but this doesn't seem to be the solution.
2). Factory calender is only to be used in case a specific date should be used (e.g. last day of the week/month). I don't think we need this, as we could just go for "todays date" during (2nd) sales order/billing document creation.
3). I checked the copy control properties, but this is not really an option I think.
Many thanks!

HI, Boiler
I suggest you to check the copy control again.
As I known, there is a Routin setting for data transfer (Data VBRK/VBRP) in the item level. And you can use standard routin 11 means Bill. date= Today.
Hope it can help you.
Wink Young

Output device not automatically determined in VF02

Hello gurus,
My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accounting. Futhermore, we have implemented Argentina eletronic invoice, which won't allow to change the invoice once it has been released to accounting. Quite a contradiction. So I'm hoping the output type will be added by condition technique while releasing to accounting, yet i believe since the output device is not being automatically determined in the background, it won't do.
Any ideas?
Thank you very much.
JP

Hello guys,
I had checked all your suggestions before posting this thread, but still the issue remains:
- VV31 condition records are fine but I cannot set a single output device since it will be used for many output devices.
- Analysis was carried in VF02 and the condition is being picked up but since requirement 62 is set in the output procedure, which forces the billing document to be first released to accounting, the condition is being removed:
- Printer is set in the user profile options, but does not come as default in VF02
Thank you all.
Kind regards,
JP

SD: Condition record not getting automatically determined

Hi,
Condition record not getting automatically determined for a condition type for which following access is maintained.
The access has table containing following fields:
Sales Organisation
Distribution Channel
Division
Sales Document type
Sales Document No.
Material no.
Following is the scenario:
A sales order is created for Project Systems attach a WBS element to the line item .
With respect to the above created sales order a Billing request ( a sales doc. type which is different than the above sales order). When the billing request is created materials appearing in the line item will be different.Different materials will appear in the billing request because of the DIP profile maintained.
The prerequisite is that before creating billing request the sales employee has to maintain condition master record with above access.The condition record will combine sales organisation, distribution channel, division, sales document type ,
sales document number ( the 1st refered sales order)
and the material are different
than the ones maintained in the 1st sales order.
This will enable in getting billing request generated without manual intervention in pricing for other materials for which condition records have been maintained as stated above.
Following is the error message we get
===================================
" Inactive X Inactive via formulae of incorrect "
Thanks
Aby
Message was edited by: Aby Jacob Emmanuel

As I know, thats just a warning message(if its a std one).
Ignore it and save.
Check your pricing date of the document. For execution it should be similar or after valid-from date maintain in condition record.
But, you need not create a condition record. Simply change the existing one combination of your desire. But, this warning will come there also for your combination.
Thanks & Regards
JP

Automatic determination of header condition in sales document

Hi Friends,
How can we make a header condition automatically determined in a sales document ?
Regards
Mahesh

Hi Mahesh,
You can use the condition supplements to automate the header condition. Please note that the condtion supplement procedure should consist of the Header condtion types.
Lets assume that you want to automate HB00 and RB00. Then for PR00, you should assign condition supplements procedure PR0000. This procedure should carry HB00 and RB00. Then while maintaining condition record for PR00, click condtion supplements and maintain rate for HB00 and RB00 as well.
Once you create order, you can see HB00 and RB00 getting picked up automatically.
Thanks & regards,
CLN

LE-TRA : automatic determination of the route for MM module

Hi guys,
for the automatic determination of the route for MM module is it mandatory to fill the storage location?
Thanks in advance,
Dom.

Dominique,
Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination. Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
Define Rule for Determination of Shipping Point
Assign Shipping Points According to Storage Location
Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above) and the "to" this the receiving plant.
James

Automatic determination of the route

Hello experts.
Is there any way to determine the automatic route for stock transfer between storage locations, using the shipping point of origin and destination?
The automatic determination of the route is transport zone and country, being the center does not assign correct. Or I can use some user exit to change the route before the creation of delivery (shipping)?
Thanks

Dominique,
Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination. Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
Define Rule for Determination of Shipping Point
Assign Shipping Points According to Storage Location
Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above) and the "to" this the receiving plant.
James

Output type not automatically determined (no output device specified)

the output device is already specified for this output
we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do?
is there a way not to manually add them?
thanks in advance
Pablito

Hi
You really dont need to add the output in all these documents.
You have to maintain the masterdata for output records in VV31.
Now just open all the invoice documents one by one in Change mode through transaction code VF02 and just save it
Whenever a document is opened in change mode, the output gets automatically triggered. Hence the output type will be automatically populated in the output screen. Once you save the document, the output gets successfully executed, and you will get the desired document
Reward if this helps you

How to automatically determine batch no. of component in Production Order

Hi PP gurus:
I am facing a issue. A finished goods with a raw material which under batch management, what I want is when I release the production order of the finished goods, SAP can automatically determine the batch no. of the raw material according to the presetted rule without hitting the "Batch Determination" button in the component tab.
Who can throw a light to me?
Thank you very much.
Paul

Hi,
To manage the materail in batches first you have to check the batch management indicator during the matreial creation in purchasing view or plandata/stor1 view .
Next you have to set the value of batch entry in MRP-2 view for Determination of batch entry in the production/process order
This indicator refers to the components of an order, not to the finished product to be manufactured. You have the following options:
The batches can be determined when the goods issue is posted.
The batches must be entered in the order before it is released.
The batches must be entered in the order before the goods issue is posted, but not necessarily before the order is released.
If you use pick parts, the batches are determined in the transfer order and then confirmed to the order. If there is no direct link between the transfer order and the production order/process order (for example, with release order parts or crate parts), you must enter the batches in the production order/process order manually.
The batches are determined automatically when the order is released.
Hope clear to you.
Regards,
R.Brahmankar

Automatic determination of Door in TU and further process

Similar Messages

Maybe you are looking for