Automatic Determination of Serial Number in SO

Hi
Our Goods are SLNO assigned .It 's hard to assign manually in the sales order or in the outbound delivery.How to do SL NO automatic assignment in Sales order or in Shipping .Any help will be highly appreciated
Thanks

Hi Nick
Using the serial number profile, you can use the indicator Serial number usage to determine whether the serial numbers are to be assigned automatically during a serialization procedure. This means that the dialog box for creating serial numbers is no longer displayed.
In this step, you define profiles.
A serial number profile must be assigned to each material that is to be serialized. This assignment is made at plant level in the material master record.
This means that you can assign a separate serial number profile to a material for each plant. However, a material can have a mandatory serial number in one plant but not in others.
In a serial number profile, you define the following:
•     Thebusiness operations for which a serialization:
              ->     Can be performed
              ->     Must be performed
              ->     Is performed automatically
              ->     Is not performed
•     Information about whether for a business operation:
          ->     Serial numbers for which no master record exists in the system can be assigned
          ->     Serial numbers which already exist in the system must be entered
•     Information about whether a stock validation is made for stock-relevant operations and how the system should deal with inconsistencies.
Note that this setting can only deliver meaningful results in combination with the setting of whether an operation <b>requires serial numbers</b>.
•     The business operations, for which an equipment master record must or must not be created for each serial number
•     The equipment category which the system should propose for the automatic assignment of serial numbers in the case of equipment master records
Thanks
G. Lakshmipathi

Similar Messages

  • Automatic creation of serial number

    Hello guys,
       In serial number profile, in serializing procedure for PPAU and PPRL i have maintained 4-automatic(creation of serial number) and this serial number profile i have given in workscheduling view of material master.When i create the production order for this material of qty 20,it gives serial number from 1 to 20.And again  i create the production order for it of qty 20,it gives serial number to it from 20 to 40.
       Now my question is,in automatic creation of serial number from where it takes the number ranges.
      Does it take from equipment category which we assign to serial number profile?If not than from where it takes?
             Thanking you guys.

    Dear Jitendra,
    Automatic Serial Numbers come from Number Range Object which is defined in Tcode SNRO. Number range is also defined in SNRO only under number range object for specific purpose.
    You can check in SNRO----> Overview which gives you Overview of Number Range Objects & Number Ranges defined from them.
    So your serial numbers are coming automatically actually defined there only.
    Pls. go through the above.
    Hope this will clarify your doubt.
    If any doubt , pls. revert and reward if useful.
    Regards,
    Tejas

  • Disable Automatic Creation of Serial Number at GRN

    Dear Gurus
    All my materials are subjected to serial numbers and the serial number profile is activated in the material master.
    At the time of GRN, the serial numbers to be selected from the already uploaded list.
    But there is a option to craete serial numbers automatically ( a check box to tick at MIGO GRN serial number tab)
    Need to deactivate the same as the users tend to tick this by mistake.
    Please guide me on the process.
    Thanks in Advance.
    NalindaR

    Hi  Nalinda,
    You got solve this question? I have the same problem, and I need disable de automatic creation of serial Number in all transactions, because serials nrs are always external. And I could not do anything with the profile of the serial nr in t-code OIS2.
    You can give me some  information that help in this question.
    Thanks in advance.
    Mary

  • Determine the serial number on GBIC

    Im trying to determine the serial number of Gbics already installed and running on a Catalyst 2950 switch. Is there a specific command to do so? There is a command on Catalyst 4506 that gives all info regarding the Gbic ("show idprom interface gi 1/1")
    Is there something equivalent for 2950?
    Thank you in advance!
    Nikolas

    You may try to snmp poll the entity mib table.
    This will give you the name of the physical components:
    1.3.6.1.2.1.47.1.1.1.1.7
    This will give you the serial number for the components:
    1.3.6.1.2.1.47.1.1.1.1.11
    Here is an example that shows the component:
    .1.3.6.1.2.1.47.1.1.1.1.7.1235 entityMIB.entityMIBObjects.entityPhysical.entPhysicalTable.entPhysicalEntry.entPhysicalName.1235 OCTET STRING Transceiver Gi1/8 "Transceiver Gi1/8"
    Here is a poll that references the index number of 1235 (Transceiver Gi1/8) and therefore the GBIC in port Gi1/8:.1.3.6.1.2.1.47.1.1.1.1.11.1235 entityMIB.entityMIBObjects.entityPhysical.entPhysicalTable.entPhysicalEntry.entPhysicalSerialNum.1235 OCTET STRING FGS16450R4R      "FGS16450R4R     "

  • Automatically update PLA Serial Number

    Hi CIN Gurus,
    When we create J1IIN-Excise Invoice, the RG23A Serial numbers getting updated.
    But how to get PLA Serial Number automatically updated in the database table. (J_1IPART2).
    Because the client requirement is When the Invoice is printed, in that it should also list the RG23A/C or both Serial numbers updated and also the PLA Serial number(CESS or some times other excise duties).
    And also to print the PLA Ledger which shows all  the entries i.e RG23A/RG23C/PLA register.
    Thanks in Advance. (Expecting to Go-live in next week.)
    BEST REGARDS
    SRI
    Edited by: Sri on Sep 27, 2008 4:44 PM

    Dear MBS,
    Then each and every invoice before printing and send it with the lorry we need to do the utilisation. Is it what required ?
    In real time, before printing the billing document, do we need to all that ?
    Is it mandatory to print the RG23A serial number and PLA Serial number in the Invoice ?
    With out printing them , just mentioning the duties and reference excise invoice number , will be accepted by Excise Department ?
    Thanks in Advance.
    Best Regards
    SRI

  • Automatic Generation of Serial Number

    Hi,
    i have to generate the serial number automatically with the following pattern XM-1234567.  can anyone guide me how to proceed with (Need Logic to Generate Serial Numbers)
    Thanks & Regards
    Dinesh SUbrahamanyam

    Hi,
    You need to first create a Numebr range object, to create a Number range object goto SNRO transaction code. so here you will generate a Number range object, then in the Program call the NUMBER_GET_NEXT then evey time if you call this number it will give the next number ...
    You can check the below link.
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/fa0331493111d182b70000e829fbfe/frameset.htm
    Regards
    Sudheer

  • Automatic generation of serial number at time of goods receipt.

    hi all,
    reqirement is like that-- my client wants to generate the serial no. of material automatically during goods reciept,
    After generation of serial no. by the system the same material will be send to subcontracting vendor by serial no wise.
    when we take the migo of the same material(return  from vendor) serial no should be generated automatically and with reffernce to this serial number material will be sale.
    pls provide me some input regarding customization and business process.
    thanx all.
    regards
    simran tofique

    Hi,
    Use t.code: OIS2, Create Serial Number Profile Z100( Copying from 0001)& have serialization procedure(MMSL) in it. And assign Serial no. profile Z100 to a material in plant Data/Stor-2 view in general plant parameter segment.
    Now create PO with that material and then during GR for that material, you are able to enter serial number in u201CSerial numbersu201D TAB in Detail data and select check box of Create Serial Nos Automatically & post GR document. Now go back and display material document in MIGO and can see serial numbers in u201CSerial numbersu201D TAB in Detail data.
    Regards,
    Biju K

  • How to create a column that automatically creates a serial number?

    How can I create a column that creates a serial number for each entry?

    you could do something like this:
    I assumed that the serial number only needs to be present if you have entered some information in the other columns of the corresponding row.
    A2=IF(COUNTA(2:2)>0, REPT("0", 6−LEN(ROW()−1))&ROW()−1, "")
    this is shorthand for... select cell A2, then type (or copy and paste from here) the formula:
    =IF(COUNTA(2:2)>0, REPT("0", 6−LEN(ROW()−1))&ROW()−1, "")
    To fill down:
    select cell A2, copy
    select column A by clicking the columne header (the "A" at the very top)
    unselect cell A1 by holding the command key while single clicking cell A1
    paste

  • Finding the first 20 letters in the serial number in Adobe Acrobat Pro XI

    I have AdobeAcrobat Pro XI on multiple computers and one of them crashed. I need to determine what serial number it had in order to purchase an update on its replacement. I must do this by using process of elimination on all working computers, looking up each serial number (or first 20 of the 24 characters). Can someone help me out?

    Hey johnh3128603,
    You might need to refer the following link to find your serial number:
    Find your serial number quickly
    Hope that helps.
    Regards,
    Anubha

  • Serial Number isn't copied when Goods Issue reference to order

    Dear All,
    I had maintained serial number profile in material master but I still have a problem when i want to goods issue (TCode MB1A) the material with serial number from refurbishment order (order type PM04).
    Why the serial number isn't copied automatically from the serial number that i had entered before in the refurbishment order. it still asked to enter serial number. Logically, it should be listed from the serial number in refurbihsment order.
    Is there any configuration that i must do?
    Best Regards,
    Albert J.

    nobody replied

  • Ix2-400d: ??? how to determine drive serial numbers (online)

    Any chance to identify drive serial numbers ( drive 4 to 1 ) online from an ix4-300D cabinet ( 4x 1TB ) via GUI ???
    Yes I can find out drive model and (sometimes) firmware level hovering over drive position on storage status.
    But I have found no way to determine invidual serial number.
    (BTW same is with unit SN)
    ( Would you do the same with a faulty PC to ask for the serial number of a faulty VGA card?)
    Background: having an open service call with confirmed drive replacement necessary. NAS is still active 24x7 in a business production environment with remote access from business partners internationally.
    Lenovo will only pre-ship replacement drive and complete RMA-procedure if I can give SN of faulty drive. Finding out would need to assign service time with the customer ( outside office hours) and extra 20 kms travel plus the risk ( as usual) that drive will not return into operating state after powering off (have seen that too many times).
    ADD: Pls. correct RMA procedure, SN of unit should be enough and is registered with Lenovo for warranty purposes anyway.
    Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
    Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
    I am not a Lenovo Employee.
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Solved!
    Go to Solution.

    I agree about the type/model/pn and we have requested that as well. I hope the add it on again. Let me know if you continue to have trouble with the replacement.

  • Hi, serial number management

    hi,
    sap gurus,
    we have entered the serial no at sales order level
    and it is not visible at order level
    then where we can see which serial number is alloted by us manually.
    2. any body help me the process of serial number which should come automatically in sales order level.
    that means
    automatic configuration of serial number in the sales order level.
    regards,
    balaji.t
    09990019711.

    Dear Balaji,
    Regarding your querry no 2 - tomaintain serial No. (internal number range for sales document) you can assign no range to sales documents using following path
    Sales and Distribution &#61614; Sales &#61614; Sales Documents &#61614; Sales Document Header &#61614; Define Number Ranges For Sales Documents
                    2.     On the Number ranges for SD documents screen, choose Change Intervals
                    3.     Choose Insert Interval (Shift+F1).
    regards,
    Vishal

  • Mountain Lion and Logic/serial number

    Hi all,
    I purchased Logic 9.0 through the app store about a year ago, and it worked fine until I installed Mountain Lion a few days ago. When I open it, I receive a message that says 9.0 isn't compatible with the OS, and after doing some research I learned that others have solved this problem by upgrading 9.0 to 9.1.7. My problem is that after downloading and installing the 9.1.7 update package, it asks for a serial number, which I was never given after purchasing it through the app store. I contacted customer support yesterday and they confirmed that Logic when purchased through the app store only requires your apple id to sign in and not a serial number. I find this strange, so I was wondering if anyone knew if Logic automatically stores a serial number somewhere in the Library folder or if anyone has any advice about my situation. 
    Thanks,
    Andrew

    Logic Pro 9.0 was never available through the app store!  oops!

  • Logic Studio Serial Number Deactivation

    Hi all,
    I have searched the Apple Support Communities and Google to try and get a answer to my question. I have also tried the Apple Online Support (and they suggested that I call their technical department, that are now shut!!!).
    How do I deactivate the serial number on Logic Studio? The reason is that I currently use Mountain Lion OS but it's become a nightmare (constantly freezing and really slowing down), so I am going to go back to Snow Leopard as this was the most stable OS that I have used. I haven't done a time machine back up (and I didn't have Logic when I was using Snow Leopard anyway).
    I want to reinstall Logic Studio once I have installed Snow Leopard onto my Macbook Pro, but am concerned that if I don't deactivate it properly that I will have issues as the serial number will already be allocated. If I was to uninstall the software, would that automatically deactivate the serial number? If so, how can I uninstall it properly (It's not like Adobe software where you have an uninstall folder/option within the applications folder)?
    I have tried the help within the software, but to no avail, and I just want to have Snow Leopard back on my machine as the bugs and lack of stability with Mountain Lion are driving me crazy!
    Many thanks in advance.

    Thanks for the quick reply .
    So... If I was to erase my hard disk and reinstall Snow Leopard, then reinstall Logic, does this pose any issues with the licence? Would I have to make Apple aware, or can I just reinstall Logic onto Snow Leopard, no problems?
    Thanks

  • Finding the serial number for an installed copy of Labview 6.1

    I have a copy of Labview 6.0 (Full Development System) and also Labview 6.1.  I was able to find the serial number label in the package for version 6.0, but not for 6.1.  I do have 6.1 installed and working on my workstation.  Is it possible to determined the serial number for an installed copy of LabView?
    Would the serial number for version 6.1 be the same as the serial number for version 6.0 that I upgraded from?

    That's what I expected, however the window that pops up when I select Help->About LabVIEW contains only the following information:
    LABVIEW 6.1
    TCP Server inactive
    Memory Allocated: 13296K
    Using unbound threads
    Version 6.1f1 - Click in window to continue
    Patent Information (link)
    ni.com/labview
    Copyright 2001 National Instruments.  All rights reserved.
    National Instruments (logo)

Maybe you are looking for