Automatic determination of the route

Hello experts.
Is there any way to determine the automatic route for stock transfer between storage locations, using the shipping point of origin and destination?
The automatic determination of the route is transport zone and country, being the center does not assign correct. Or I can use some user exit to change the route before the creation of delivery (shipping)?
Thanks

Dominique,
Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination.  Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
Define Rule for Determination of Shipping Point 
Assign Shipping Points According to Storage Location
Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above)   and the "to" this the receiving plant.
James

Similar Messages

  • LE-TRA : automatic determination of the route for MM module

    Hi guys,
    for the automatic determination of the route for MM module is it mandatory to fill the storage location?
    Thanks in advance,
    Dom.

    Dominique,
    Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination.  Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
    If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
    Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
    Define Rule for Determination of Shipping Point 
    Assign Shipping Points According to Storage Location
    Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
    For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above)   and the "to" this the receiving plant.
    James

  • Output device not automatically determined in VF02

    Hello gurus,
    My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accounting. Futhermore, we have implemented Argentina eletronic invoice, which won't allow to change the invoice once it has been released to accounting. Quite a contradiction. So I'm hoping the output type will be added by condition technique while releasing to accounting, yet i believe since the output device is not being automatically determined in the background, it won't do.
    Any ideas?
    Thank you very much.
    JP

    Hello guys,
    I had checked all your suggestions before posting this thread, but still the issue remains:
    - VV31 condition records are fine but I cannot set a single output device since it will be used for many output devices.
    - Analysis was carried in VF02 and the condition is being picked up but since requirement 62 is set in the output procedure, which forces the billing document to be first released to accounting, the condition is being removed:
    - Printer is set in the user profile options, but does not come as default in VF02
    Thank you all.
    Kind regards,
    JP

  • Partner function SP determine in the sales order

    Dear SD Gurus,
    I want to determine the partner function SP in the sales order, when not entered anyvalue, the sales should give incopleteness check.
    But what the client here wants is that, sometimes the client wont enter any value on the sales order,so he will deleted the automatcally determined part function on the partner tab of the sales order header.
    Here the partner function should be not mandatory (because when the client wants to deleted the line ofn the header tab,system doesnt allow to do it). Also the partner function should not be not modifiable, because he may want to change it when sth wrong has been entered.
    So to automatically determined the partner function on the sales order,either modifiable or mandatory should be selected as I know.But when both are selected, this is not a good way for usage.
    Do you have any suggeston to make this partner functon automatically determine on the sales order and when wanted, deleted?
    Thanks
    Jack

    Hi,
    Try this way and see whether it's what is require by the customer.
    First of all what is this Partner function your talking about?
    Can you maintain this Partner function for each customer? If possible you can try this method.
    Go to below IMG path:
    Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Customer Master
    Then highlight the "Partner Determination Procedure"
    Double click on "Partner Functions in Procedure" node
    If you haven't maintained your partner function there, add it
    Set it Mandatory if you want it to be set mandatory for each customer.
    Save
    Then go to below IMG path:
    Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Sales Document Header
    Highlight the relevant Partner Determination Procedure for Order Header
    Double click on "Partner Functions in Procedure" node
    Add If you haven't maintained your partner function there, add it
    Don't Mark it as mandatory or not modifiable
    Save
    Now go to you customer master from XD02 transaction.
    System will ask you to add new partner function as it is Mandatory.
    Now create a Sales order from that customer.
    System will automatically copy that Partner function to you Order Header.
    If user wants to delete it, he can delete it from there.
    If user want to change it, he can change it from there.
    Hope this helps !
    Best regards,
    Anupa

  • Automatic determination of Region of destin.

    Hi experts,
    I am facing a problem in the import tab of Purchase order.
    How to maintain the <b>Region of destin</b>. to make it automatically determined after the Ctry of origin, Dispatch ctry and Ctry of destin etc have been auto entered? I know it can be manually selected, but fail to know how to make it automatically displayed.
    Thanks,
    Helen

    on the item level of purchase order, for the trade happened in Europe, there would be possibly the tab of import.
    in the tab, there are five fields:Ctry of origin, Dispatch ctry, Ctry of destin.,Trading country and Region of destin.. How to make the field <b>Region of destin</b>. auto determined if other four fields have entered auto?
    Thanks, (hope it is more clear now)
    Helen

  • Automatic determination of condition group

    Hi
    My client has the following requirement:
    - For 3rd party items, in few situations we might have to supply the items immediately.
    - In such situations we request our supplier to supply the item directly to the customer (instead of bringing the item into our plant and then shipping)
    - In the existing sales orders we change the item category of the item from ZTAN to ZTAS (3rd party item).
    Customer wants to have automatic determination of the condition group 2 field at the item level (to some specified CG2 values) whenever we have the change in the item category.
    Let me know how we can do this.
    Regards
    Jagadish

    Hi Jagadish,
    The field Condition group 2 will be depend upon the Customer not based on the Material or Item or itemcategory,
    So I dodn't think system will change the data in this field when you change itemcategory alone.
    If you change the customer it will change accordingly
    I hope it will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Jul 12, 2008 6:37 AM

  • We have a requirement where route must be automatically determined in delivery

    Hello Folks,
    I have requirement in which route must be determined automatically in delivery based of delivery date for example,
    If confirmed delivery date is 22/07/2014 then Route A must be determined and if confirmed delivery date is 29/07/2014 then Route B must be selected
    Any thoughts?
    Regards,
    Khawar

    Hello Noel,
    Thanks for your reply, I really appreciate it.
    Actually I misunderstood requirement yesterday, here is the complete detail and hoping you are anybody can help.
    When SO gets created system gives us confirmed schedule line and that schedule line date gets forwarded to our Third party carrier through EDI and he arranges transport based on that date.
    Now the problem is, suppose Customer Requested Delivery date is 09/07/2014 and confirmed schedule line date is 14/07/2014 because transit time is 5 days.
    This 14/07/2014 date will go to carrier and he will arrange transport accordingly but customer is expecting good on 09/07/2014.
    Our requirement is:
    1) at sales order level if customer expected Price can't be met, system should generate a warning.
    2) at delivery level system should automatically determine available route which can help us meet customer requested date and if  that date can't met system should put a block on delivery.
    Remember we have three types of routes for same connection points from 15 days to 2 days and we want system to pick any one of them or block if not possible.
    Regards,
    Khawar

  • Automatic and manual batch determination at the time of Goods receipt

    hi,
    where i can have the settings for automatic and manual batch determination at the time of Goods receipt and goods issue..
    E.g.: If i am receiving material from vendor then my requirement is system will generate batch automatically...
    Where  we can get this setting?
    Tx
    Uts

    Dear,
    You assign the batch number either
    Manually
    Automatically, using internal batch number assignment, refer to Customizing for Batch Management under Internal batch number assignment.
    Internal batch number assignment is activated for the complete client, unless you exempt individual plants or materials using a customer exit (see Configure customer exits for intern. batch number assignment in Customizing for Batch Management).
    The R/3 System informs you that the internal batch number assignment is active. You are however only informed once per transaction, for example, when you enter the first item on the multiple-entry screen.
    Please refer: http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
    Regards,
    Syed Hussain.

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • Sub:ck11n not picking the routing automatically

    Hi Guru,
                Create cost estimation (ck11n) ,not picking the routing data automatically

    Dear Jothi,
    Goto OKKN,check for the costing variant under quantity structure control tab,whether the routing selection ID is assigned properly.
    Say if selection ID is 01 and the first priority is for N task list type(that's normal routing),then the system will pick it automatically.
    Likewise if it fails to find N,then it searches for the second priority given in the same selection ID.
    This is how it picks for costing in CK11N,Also check the routing status in CA03,under header whether it's 4 - released and usage
    is for 1 production.
    Check and revert
    Regards
    S Mangalraj

  • Automatically determine the staging area and door

    Hello Gurus,
            How to automatically determine the staging area and door ? and where to configure it?
    thanks very much!

    Hi zhang
    Material staging areas and doors are related to Warehouse management.
    First of all assign WM to your storage location
    Doors
    This is the place where the goods come to the warehouse  or  leave  from the warehouse
    The use of doors is to pick and  putaway  process in the warehouse.
    You can also assign the doors to the staging areas as goods receiving and shipping points
    Material staging areas
    This is an organizational unit that is assigned to the warehouse number. It is used to organize the goods flow in the warehouse
    The use of the material staging areas is that , they are used for interim storage of goods in the warehouse
    Staging areas can be defined for other purposes like goods receipt and goods issues
    Regards
    Srinath

  • Deactivate the automatic determination of Requirement type

    How can i deactivate the automatic determination of Requirement type for a particular transaction (eg.va01).
    I know it is determined automatically based on one of the following
    1.Strategy group assigned to the materiaL master.
    2.MRP group in material master.
    3.Material type
    4.Item category and MRP type.
    5.Item category.
    I want this to be deactivated for a particular transaction. How do i do it?
    Please help.
    Madhu

    Hi,
    As soon as you save an order.VA01..the requriements of each line item are trasnferred to MM/PP depending on the planning strategy chosen for each material at the material master record. Therefore there is no chance of deactive the requriement type.
    I'm not sure but try this exist,
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order.
    Regards,
    R.Brahmankar

  • Table to find the Route Determination

    Hi,
      Is there any table to find the route determination..?
    Note :-I am not talking about route table (TVRO and TVROT), I am asking about ROUTE DETERMINATION table.
    Thanks is advance..
    Regards,
    Rahul..

    HI
    check these tables
    TROAZ     Routes: Determination in Sales Documents
    TROIZ     Route Determination: By Country and Zone
    TROLZ     Routes: Determination in Deliveries
    regards
    prashanth

  • Delivery date determination in the schedule lines

    Hi,
           I have a question on the delivery date determination in the schedule lines of the sales order. If the goods issue date in the schedule line has been determined as 17th Aug 2009, and the transit time is 3 days. What should be the delivery date that will be proposed? Should it be 10 + 3 equal 20th Aug 2009, or it will be 21st Aug, which is the the following day of 10 + 3 ? I simulated in the sales order and it gave me 21st, my understanding was it should be just 17 + 3 = 20th Aug.
    hope anyone can shed some light on the above. TQ
    krt

    Hi ,
    This is what F1 help says
    Rounding-up period for delivery scheduling (in days)
        The amount of time that the system automatically adds as a safety margin
        to the estimated time required for processing a delivery.
    Use
        The system adds the rounding-up margin to the time estimates for a
        delivery, regardless of whether the system
        o   Calculates the times from data in the master records, or
        o   Simply uses the default times that apply to the relevant shipping
            point.
    This is F1 Help of rounding days and not my words..... you can also check in OVXD t-code.
    Thanks,
    Raja

  • When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Websites remembering you and automatically log you in is stored in a cookie.
    *Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    *Tools > Options > Privacy > Cookies: Exceptions
    In case you are using "Clear history when Firefox closes":
    *do not clear Cookies
    *do not clear Site Preferences
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

Maybe you are looking for

  • Flashbuilder 4 how to create custom folders in component explorer

    Hi, I was wondering if anyone knew how to create my own folder in the components explorer? I know that when I create a new component it gets added under "custom", but I want to create my own folder and insert an image next to the component. I've sear

  • IMac Flash install doesn't work

    I have attempted to install Flash 14 on my iMac at least 10 times and without fail the install always fails and locks up my iMac every time the retrieving window comes up. My system has plenty of HD and memory so that can not be the issue and I have

  • Document Name Fieldfunction

    Is it possible to have "Documentname" in Template automatically actualized when saving new document?

  • Is it possible to add columns to segmentation wizzard

    Hi, I'd like to know if there would be any way that when i generate a segment with segmantation wizzard and i could add some columns that i need and that the segmentation wizzard populates it. For instance i'd like to add a column for account, to see

  • Photoshop CS6 start screen displays circles

    My Photoshop CS6 start screen displays circles around its rectangular shape. Can anyone tell me why? I am using version 13.0.4 x64 on Macintosh OSX 10.9.2 Here is what the screen looks like: