Automatic duplex printing under 64 bit Windows7 using Business Inkjet 1100

Is there no driver/setting that allows automatic duplex printing for business inkjet 1100 under 64 bit Win7? I have found the work-arounds (manual duplex printing) but that is an entirely unsatisfactory solution...if the printer happens to grab two sheets of paper on the second pass for a long document, the whole thing is spoiled.

Hi,
Enter Control Panel > Devices and Printers,
Right click the printer icon, then click Priinter Properties.
Click Device Settings.
Mark the Two-Sided Duplex Accessory as Installed and the Automatic Duplex print option will appear.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Automatic Duplex Printing not working on HP Color LaserJet 3600DN in Windows 7. It worked before.

    I have an HP color laserjet 3600 DN on Windows 7.  This computer came w/ Windows Vista and a 3600DN driver was installed and the computer was upgraded to Windows 7.  The printer did automatic duplex printing.
    At one point, my computer indicated that it could no longer find the printer.  In an effort to solve this problem, I uninstalled the printer. When I tried to reinstall the printer the computer could not find the driver. At that point I tried to download a windows 7 CLJ 3600 DN driver.  Since HP doesn't provide this driver for Windows 7, I tried to download the Windows Vista driver for 3600DN.
    However, when I go to the appropriate webpage by following the links, only drivers for Color Laserjet 3600 are listed (no 3600DN drivers). 
    As far we can tell it only allows Manual Duplex printing (no automatic duplex printing).  Clicking the "Two Sided Duplex Printing" option is there but only works when the "print on both sides (Manual)" is set on the Finishing page.  If manual is turned off, then it becomes single sided.
    Can I get a driver that will allow me to do automatic duplex printing on on my HP CLJ 3600 DN using Windows 7?

    How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

  • How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

    How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC  using windows 8?

    Thanks for your reply.  
    Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
    http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
    Drive productivity and save paper, using automatic two-sided printing

  • D7360 automatic duplex printing is not available with latest driver

    d7360 automatic duplex printing is not available with latest driver
    This question was solved.
    View Solution.

    Hello ephsh,
    Welcome to the HP Forums.
    I see that you are having an issue attempting to do some duplex printing.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    I am going to attach a document that deals with a Two-Sided Print Option Is Not Available Even Though an Automatic Two-Sided Printing Accessory (Duple....
    Please feel free to write me back at your convenience.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Automatic duplex printing with DeskJet 6980dt with Windows 7, MS Office 2010

    What do I need to do in order for my DeskJet 6980dt to automatically duplex print without manually  inserting the paper?  Prior to changing my OS from XP to W-7 the printer would duplex print when I changed the "properties" but since installing W-7 "properties" does not provide me with that option.

    We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
    When you try to configure it given error 0x8004110.
    Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
    Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
    http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
    For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Cancel duplex printing on HP 6700 using Mac OSx Yosemite

    I've been searching the HP Forum site for weeks for a solution to turning OFF the duplex printing on the HP 6700 printer.  The "tab" listed does NOT appear...so it's impossible to click on it.  There are NO options or two sided printing on the HP 6700 print screen.  None of the solutions here work...at least for us.  It appears lots of others are having this same problem with the HP 6700 printer...no way to turn off duplexing.  Does anyone have THE solution that works?  Again, using a Mac Pro with the OSX Yosemite.  (We couldn't get the duplex printing to stop with the last OS either.)  Help would be much appreciated.

    Hi,
    Follow the steps below to disable duplex printing:
    Open the file used to print, click the File menu, select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click on Show Details to see all available settings.
    Click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    Select Layout from the drop-down menu.
    Set the Two-Sided option as Off.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset... Any used preset will remain default till another preset will be used.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 2nd Paper tray not showing on Business Inkjet 1100

    I have recently purchased a computer with Windows 7 (64 bit)  and installed my Business Inkjet 1100 that has 2 paper trays.  I installed the printer using the driver for the Business Inkjet 1000 as recommended on your website.  Everything seems to be working ok but I do not have an optiion for the 2nd paper tray and it will not use any of the paper in the second tray.  How do I fix this?

    I have the exact same problem. The only time it will use tray 2 is if tray 1 is out of paper but this is useless if i want to use tray 1 for photo paper and tray 2 for normal paper.
    Anyone?
    EDIT:
    I tried the driver for the 1200dtn from Microsoft instead of the 1000dtn that HP suggested. Now everything works. Duplex, selecting tray, etc. Good times. :-D

  • Vista Driver for Business Inkjet 1100

    Does anyone know a workaround driver for the Business Inkjet 1100 on Windows Vista? I've tried the Business Inkjet 1000, but no go.

    Hi,Try using the HP Printer Install Wizard and check if that may help:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-PIW&jumpid=ex_r4155/en/hho/ipg/forum/piw/

  • CP2025dn printer, automatic duplex printing

    Recently, after a couple of updates, the CP2025dn printer only allows manual duplex printing.  Operating system is Windows 7.  Where do I get a driver supporting duplex printing or what do I need to do to turn on 'automatic' duplexing? 
    HP is starting to get under my hide!

    Probbably because the M451nw model does not have a duplex unit - you'd need the M451dn or M451dw model for automatic duplexing. The best that can be done with the M451nw is manual duplexing (where odd sides are printed first, then the driver instructs you to take the printed pages and place them back in the input tray, then prints the even pages - or perhaps evens, then odds? ), provided that the driver in use supports this.

  • Automatic duplex printing not found only manual duplex

    in the Data sheet  for theHP Color LaserJet Pro MFP M476 series, it clearly states in the spec sheet under:
    Duplex print options [under MFP M476nw Manual (driver support provided)]  under MFP M476dw Automatic (standard)
    However, when I choose to print ,say a Word doc or a multipage PDF with my MFP M476dw - the only option I have, when I hit Copies & Pages is Manual Duplex!!!
    How do I access the Auto Duplex function please?
    This question was solved.
    View Solution.

    Thanks Mohammed - going to Layout and choosing one of the edge options in the Print Menu  fixed it! And then I saved it as a Preset, 'Duplex'     Tah...

  • Slow printing from Mac to HP Business Inkjet 2800dtn

    Hi,
    We have an iMac running
    Mac OS X 10.5.8
    Indesign 5.0 CS4
    Acrobat Pro 9.0.0
    HP Business Inkjet 2800 driver PS v3010.107, with 76Mb Memory
    It's taking forever to print documents that are a few Mb in size.
    The documents are created with Indesign.
    I've tried outputting to pdf and it's still no better.
    One pdf is 3.5Mb and just gets stuck at 5%. The printer shows "processing job" until it fails after 30 mins.
    I've tried printing the pdf from a Windows XP pc using the HP postscript driver and it's the same. The spool file shows as being 18Mb on the PC.
    Printing using Windows PCL driver, the speed is OK but the quality is poor. The only way to get these to print is by using the Windows to print to PS with the print to Image option selected.
    I've looked at the Mac spool folder and it looks like 6Mb when it goes to print.
    It prints OK to an A4 HP CP3505N colour laser.
    I've got a call out with HP but they seem stumped at the moment.
    Any advice would be great.
    Many thanks

    Hi,
    if you will follow my correction, that not the printing itself is slow but the time for transferring the data to the printer, so I can serve with a solution.
    Look attached file or to the following (english) thread. There is a new modified driver for the 2800, supporting 2 tray, duplex and sizes to A3.
    http://www.mac-forums.com/forums/other-hardware-peripherals/119579-g5-very-slow-printing-h p-2800-a.html#post923300.
    The german readme is included in the ZIP. The file should work on german and english systems.

  • Duplex printing of Customer statment using XMLP

    We want to print a customer statement double sided. The customer total and footer should only appear on the last page. Since the statement can be of multiple pages, the new customer should always start at the even numbered page. This is similar to putting 'This page has been left blank intentionally' text on the last page. Please suggest how we can achieve this. Any help will be greatly appreciated.

    Hi. We want to do the same thing. Did you ever find a solution to printing duplex in BI Publisher?
    Thanks.

  • Black goo inside printer under black cartridge. using HP 74XL cartridge and 75XL color cartridge.

    Black goo under black cartridge.  printer says Print cartridge missing or not detected  Have fiddled with cartridges to make it print sometimes, now mostly won't print.

    It is normal for there to be ink in the service station area where the printheads are parked when not printing.  It is not necessary or desirable to clean this area. 
    Please read this post then provide some details.  What printer model? What operating system?
    Cleaning the cartridge contacts as shown in the document here may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer says is in use/busy/busy

    HIall of a sudden when my daughter wants to print from her mac air - it comes up with a message saying that printer is in use Have tried deleting and re adding the printer Any ideas Thanks J

    Hi , I see that you are getting the message that the printer is in use. I would really like to be able to help you resolve this issue today.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart 5520 e-All-in-One and HP Deskjet Ink Advantage 5520 e-All-in-One Printer Series - Printing a Network Configuration Page. Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.  

  • Toolbox won't install on Vista x64 with HP Business Inkjet 1100

    To install my HP 1100 on Vista x64, I was redirected to the only compatible driver which was for the HP 1000.  The printer works, but has lost some of it's features such as double sided printing and the Toolbox to monitor ink levels.  A search of the forums suggested installing OJProK550_Toolbox_en.exe, but after installing that I can't get it to function because it states the driver hasn't been installed.  What driver?  I'm confused since I have the functional driver for this printer installed and even reinstalled through New Drivers to be sure I had the latest.  I suspect the conflict and failure has something to do with this optional driver I had to use. 
    Can anyone offer some suggestions please?  I hate to wait until my ink cartridges are empty before finding I need one (it usually happens on a weekeng!) 
    Interestingly, I "scabbed" this printer to my laptop running XP x32 and from there I can do doublesided printing, but cannot access the toolbox either.

    Hello, have you tried using the PCL 5 UPD? In my experience, PCL 5 runs better and is not glitchy which seems what was going on before you uninstalled it. Also, how do you have the IP addresses setup for your home network?

Maybe you are looking for