Automatic excel loading at startup

My Macbook has just recently started automatically loading Excel upon startup. Any ideas on how to stop this? Thanks for your help.

Go to the Apple icon on the Finder bar. then to System Preferences>Accounts and the Login Items tab. Excel should appear in the list, uncheck it or highlight it and press the little minus sign to remove it entirely from the list.

Similar Messages

How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

How do I stop Adobe Bridge, Excel, Word and Adobe Photo Downloader from loading at startup under Mac OS 10.7.1, they are not loaded in login items.

When you shut down this window appears.
Uncheck the reopen box and it should stop this from happening

How can i stop programs from automatically loading during startup?

how can i stop programs from automatically loading during startup?

Go to the Apple menu > System Preferences > Users & Groups and click on the user in question then on "Login Items."
Also check the Startupitems folder: OS X Yosemite: If you have problems with startup items

How can I get my homepage to load on startup?

My Yahoo homepage used to load on startup before I installed OS update.
How can I get it to load automatically again?

I have Snow Leapord and now when I startup Safari, my original homepage is gone, and there are only two choices: blank page or all the open pages from the previous session!! What happened to putting in the startup page option? When did the Preferences change?

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up.

PHANTOM web page loads on startup. Upon startup, an unwanted web page loads up. My preferred web page "A" is still shown on the settings under -Tool-Options-General, home page address is correct and home button works correctly.
Some file somewhere is forcing this page upon startup. I would like some ideas where to look.
I have run various utilities such as AVG, Tweaknow, and spybot s&d newest version.
Its just annoying to have to look at Yahoo Brazil upon startup
A few months back, someone suggested some reset setting in Firefox, boy what a mistake, took a long time to get things back the way I like them, and it didn't work.
I see this in the troubleshooting info ???
"browser.startup.homepage_override.mstone": "19.0",
"browser.startup.homepage_override.buildID": "20130215130331",

The prefs that you posted are normal for a Firefox version (in this case Firefox 19.0.
Please update to the current Firefox 22.0 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox 19 version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
Try to use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

load-on-startup problem

Hai all,
I want to run a servlet on start up
i did following
1) Add following to web.xml
<servlet>
<servlet-name>Schedular</servlet-name>
<servlet-class>com.abc.xyz.Schedular</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
2) copied the file to com.abc.xyz
but when i restarting iam getting following errror
Cannot load Servlet name
my java files shown below....am around it
import java.util.Timer;
import java.util.TimerTask;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Schedular extends HttpServlet {
Timer timer;
public Schedular(int seconds) {
timer = new Timer();
timer.schedule(new RemindTask(), seconds*1000);
class RemindTask extends TimerTask {
public void run() {
System.out.println("hai !");
timer.cancel(); //Terminate the timer thread
public void init(ServletConfig config) throws ServletException {
     super.init(config);
System.out.println("About to schedule task.");
new Schedular(5);
System.out.println("Task scheduled.");
public void service(HttpServletRequest request, HttpServletResponse response)
     throws IOException, ServletException
               System.out.println("servee.");
}

In web.xml, you say the servlet class is com.abc.xyz.Schedular but your servlet isn't in the package.
You need to add the following to your servlet...
package com.abc.xyz;Hope this helps,
JEB

Date/time icon and other movable icons on menu bar cannot be loaded on startup,but it works if manually loaded

Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually turn them on, as well as iStat Menus
However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
Someone please lend me a helping hand?
I've attached some pictures in order to make my situation easier to be understood.
these icons can't be loaded on my loggin in.
but they can be loaded manually
however, these icons will be loaded on startup
I've almost despaired to resolve it . Thanks for your help!

I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure.

VB6 and Excel loading then unloading immediately

First off I posted this here
http://social.msdn.microsoft.com/Forums/office/en-US/4c07879b-e033-4e8f-8266-95f9f606923a/vb6-and-excel-loading-then-unloading-immediately?forum=exceldev However I think this is the right forum for this.
We have an old VB6 application that uses data from and to Excel 97-2003 XLS and
Access MDB. This application is slated to be updated to VS2012 and VB.NET. In
the mean time I have a glitch that I cannot seem to find the issue. When we
load the VB6 app it opens Excel 2010 in the background for getting and setting
data. We are set to roll out Office 2010 on everyone’s system and I am still
unable to find why it works fine on two systems and not on others. With Office
2007 everything seems to work just fine.
What happens is when I look at the processes in Task Manager on my Windows 7
Enterprise edition with Office Professional Plus 2010 system while loading
the VB6 app I see?
EXCEL.EXE *32 | "My user name" | 00 CPU | 10,132k | Microsoft Excel
This is normal and stays in process the entire time I run it on my system. I also have
this working on another end users system. However the issue and the fix I used
on our two systems does not seem to work on other systems. I launch the VB6 app
and it comes up.
EXCEL.EXE *32 | "My user name" | 00 CPU | 10,132k | Microsoft Excel
This loads in the processes and then immediately unloads without any errors. Then when I
execute something that needs to use Excel I get.
Run-Time error ‘91’:
Object variable or With block variable not set.
This only happens if Excel unloads immediately otherwise the program works great. There
are no events in any of the event logs and our other IT guy said it is loading
and unloading normally with out crashing.
I have applied this to the systems http://support.microsoft.com/kb/926430/en-us . In
all of my searching this looked like the best answer. However only two systems
are working with Office Professional Plus 2010.
Here are the references and components.
References:
Visual Basic For Applications
Visual Basic runtime objects and procedures
Visual Basic objects and procedures
OLE Automation
Microsoft DAO 3.6 Object Library
Microsoft Excel 5.0 Object Library
Components:
Controls
Desaware Animated Button Control
Microsoft Common Dialog Control 6.0 (SP6)
Microsoft Data Bound Grid Control 5.0 (SP6)
Designers
Dat Environment
Data Report
DHTML Page
WebClass
Code:
Public xlApp As Excel.Application
Public WBSetup As Excel.Workbook
Public objWbCALC As Excel.Workbook
Public objShtLEVELS As Excel.Worksheet
Sub Main()
' There is more code here that is not specific to Excel issue
Set xlApp = Excel.Application
' Get the workbook.
Set objWbCALC = xlApp.Workbooks.Open("c:\temp\Calc.xls")
Set WBSetup = xlApp.Workbooks.Open("c:\temp\Setup.xls")
' Get worksheet
Set objShtLEVELS = objWbCALC.Worksheets("Levels")
' There is more code here that is not specific to Excel issue
End Sub
This is working on one system that had Office 2007 and was upgraded to Office 2010. Working on my system with Office 2010. The EXE file is ran from the server you can install it or add the OCX files to local system and register them with regsvr32. No
new components have been added or changed to the actual VB6 application. It seems to work on two systems and not on other systems.
However our test system have Office 2010 loaded on it and never had office 2007 on it. Maybe there is a residual left over file on it.
Any ideas?
www.ipdg3.com

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I would like to know whether you can get the same issue when you create/load a Visual Basic application rather than VB6 in VS2012. If the issue only occurs when you load VB6 app, as Andrew said, there are other better forums for
VB6 app provided in this thread:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions?forum=vbgeneral
For example:
VB Forums
VB City
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How on reboot can I set Firefox to automatically re-load the tabs I had open when I shut down?

Every morning when I do a soft boot to clear the cobwebs out of my PCs brain I have my start settings automatically load 6 apps. Firefox is one. Then I go to a toolbar start tab and click on open all Tabs and it loads 4 tabs for me.
I'm trying to automate this loading of the tabs
I'm using Firefox 4.0. The previous version had a function that asked, when you were closing Firefox, if you wanted the tabs you have open at that point to we load the next time you open Firefox.
This was kind of a jack-leg way of getting tabs open on re-boot, tho it was still an irritation....
This question does not seem to happened in 4.0.
Is there a setting to always invoke the question?
Better yet, is there a setting to always have the tabs / a select group of tabs always open on boot?
Example -in my case I load Vonage, then Sharefile, then 2 home page tabs.
This helps me keep my poor brain organized during the day as I'm multi-tasking in Firefox and the other apps and the phone and such.
My thanks in advance.
Kris

Tools-Options-General 'When Firefox Starts ' Select: 'Show my windows and tabs from last time'

Should I be able to reliable automate Excel 2000 on a Windows 2000 PC using Labview 7?

I am trying to automate Excel 2000 from Labview 7. I want to open an Excel application, open an existing workbook or create a new workbook, create a new sheet, save and exit. When using the Labview 7 .vi's I can create a new workbook, etc, and everything works fine. When the case in my program for existing file executes I can start Excel but I cannot open an existing worksheet (error -2146959355). I've selected a file using the labview file dialogue just to ensure spelling, case, etc but it always fails on the "open specific workbook" sub .vi and the first error is on the output of the "invoke node".
Out of curiosity I tried doing this in Labview 6.1 and after a cursory check ev
erything seems to work ok using the exact same sequence of .vi's. I am running Excel 2000 on Windows 2000. Should there be a compatibility issue? Would using the version 6.1 vi's within Labview 7 be a clean solution?
Thanks in advance

Thanks for responding.
I made a little vi to illustrate the problem.
The two sub .vi's I'm including with the main .vi are simply the renamed Version 6.1 and Version 7 "open specific workbook" .vi's. The main .vi was made in Version 7. All the other sub .vi's are V 7.
On my PC (Windows 2000 and Excel 2000) when the switch is set to "Version 6.1" it consistenly runs fine, set to "Version 7" it consistently fails.
I am very stumped! I've gone so far as to copy the V7 .llb from a different installation just in case something got corrupted somehow.
Attachments:
ExcelError.vi ‏44 KB
Open_Specific_WorkBookV6.vi ‏37 KB
Open_Specific_WorkBookV7.vi ‏37 KB

load-on-startup 1 /load-on-startup not working in Weblogic 9.1

Hi
          I have the following xml tag in web.xml file
          <load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this.
          do i have to mention anything in weblogic.xml?
          Any ideas how do i fix this

You're right, your situation is very similar to the situation the other poster describes. However, the main similarity is that neither of you have given us any information about what is going wrong. We can't read minds or read what's on your screen. We need to see specific error messages, stack traces, and specific code that shows what you are trying to do.
          However, it's likely that you're running into problems with the issues with "tag reuse" and "tag pooling". You should first read the JSP specification in the areas that talk about this issue, although this will probably leave you with more questions than you started with.
          I'm guessing that your "<gui:button>" element doesn't have any attributes. It's possible that WebLogic is reusing a single "<gui:button>" tag instance for each occurrence in your page. You may have to figure out how to turn off tag pooling in the JSP compiler, but I'm not sure how to do that.
          It's possible that Websphere doesn't give you an issue with this because perhaps they didn't bother with the tag pooling optimization (it is a good thing to have it available).

load-on-startup not working in weblogic 9.1

Hi
I have the following xml tag in web.xml file
<load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this.
do i have to mention anything in weblogic.xml?
Any ideas how do i fix this

Sounds like a bug. I'd suggest opening a case with [email protected]
FWIW, I get a little nervous about inter-application dependencies like
this, but the feature should work.
-- Rob
Subramanian V wrote:
Hi,
I have two applications -
ear1 is deployed in zipped format with a deployment order of 110
ear2 is deployed in exploded format with a deployment order of 150.
But when I start up weblogic, its almost always ear2 which is deployed first.
The behaviour seems random and it looks to me as if Weblogic is just picking at
random the application to deploy first.
Is there any solution for this?
rgds

How long load-on-startup servlet stays in weblogic6.1 sp2

does anybody know how long a load-on-startup servlet exists (before
          gets destroyed) in weblogic6.1 sp2. What i want is in load-on-startup
          servlet, I want to schedule a java.util.Timer and when application
          gets undeployed, i want to cancel that timer. if load-on-startup
          servlet exists for the whole application life span then i could do
          timer.cancel() on the destroy method of load-on-startup servlet.
          any suggestion?
          thanks in adv,
          soumik


You can simply use ServletContextListener instead - that way you do not
          have to worry if (or when) WebLogic decides to destroy the servlet.
          soumik <[email protected]> wrote:
          > does anybody know how long a load-on-startup servlet exists (before
          > gets destroyed) in weblogic6.1 sp2. What i want is in load-on-startup
          > servlet, I want to schedule a java.util.Timer and when application
          > gets undeployed, i want to cancel that timer. if load-on-startup
          > servlet exists for the whole application life span then i could do
          > timer.cancel() on the destroy method of load-on-startup servlet.
          > any suggestion?
          > thanks in adv,
          > soumik
          Dimitri

Can't get Servlet to Load On Startup

          I am trying to get a servlet to run at startup, and I have put the xml below in WEB-INF/web.xml to make this happen, but it is not working. The servlet does not run at startup.
          Anybody have any idea what the problem is?
          <servlet>
               <servlet-name>Cocoon</servlet-name>
               <servlet-class>org.apache.cocoon.Cocoon</servlet-class>
               <init-param>
                    <param-name>properties</param-name>
                    <param-value>./WEB-INF/cocoon.properties</param-value>
               </init-param>
               <load-on-startup/>
          </servlet>
          <servlet-mapping>
               <servlet-name>Cocoon</servlet-name>
               <url-pattern>*.xml</url-pattern>
          </servlet-mapping>
          ALSO, The servlet in this case is the Cocoon servlet, and the reason I am trying to get it to run at startup is because in my application I am calling it from another servlet, instead of through a direct call to an *.xml file, and so it requires a direct call to Initialize the Cocoon Engine. So, if anyone knows anything about how to solve this problem, that would also be helpful.
          Thanks.
          Harris.


          Thank you!
          That worked.
          Ruslan Bilorusets <[email protected]> wrote:
          >Harris,
          >
          >Please, try to specify a value for the <load-on-startup> element. It looks like a bug in our code.
          >
          >So,
          ><load-on-startup>1</load-on-startup>
          >should do the trick.
          >
          >Thanks,
          >-ruslan
          >
          >harris wrote:
          >
          >> I am trying to get a servlet to run at startup, and I have put the xml below in WEB-INF/web.xml to make this happen, but it is not working. The servlet does not run at startup.
          >>
          >> Anybody have any idea what the problem is?
          >>
          >> <servlet>
          >> <servlet-name>Cocoon</servlet-name>
          >> <servlet-class>org.apache.cocoon.Cocoon</servlet-class>
          >> <init-param>
          >> <param-name>properties</param-name>
          >> <param-value>./WEB-INF/cocoon.properties</param-value>
          >> </init-param>
          >> <load-on-startup/>
          >> </servlet>
          >> <servlet-mapping>
          >> <servlet-name>Cocoon</servlet-name>
          >> <url-pattern>*.xml</url-pattern>
          >> </servlet-mapping>
          >>
          >> ALSO, The servlet in this case is the Cocoon servlet, and the reason I am trying to get it to run at startup is because in my application I am calling it from another servlet, instead of through a direct call to an *.xml file, and so it requires a direct call to Initialize the Cocoon Engine. So, if anyone knows anything about how to solve this problem, that would also be helpful.
          >>
          >> Thanks.
          >> Harris.
          >

Flat file loading... how to automate the loading of multiple files

HI Alll,
I'm wondering if it's possible to create a routine that automates the loading of several flat files into a PSA table.
I only want a single info package, and I would like this info package to load file 1, then load file 2, file 3 etc etc....
The alternative is to create info packages for each flat file, but this seems clunky and inefficient.
Is this possible?
Regards,
Frederick

Hi,
It is not possible with single infopackage. you have to create different infopackages. But you can put it in process chain in sequence to load different flat files.

Automatic excel loading at startup

Similar Messages

Maybe you are looking for