Automatic execute proecdure or query
Hello
i want write the proecdure or query that automatic execute--
i grant some privileges to user (select /insert or update) for 15 days
now i go to out of station of some work ,, i want a proecdure that automatic execute and rewoke the privilege after 15 day..
also tell me how i grant only (export and import) privilege/rewoke of the user ,, he can only take backup of database by exporting
now i go to out of station of some work ,, i want a proecdure that automatic execute and rewoke the privilege after 15 day..u can also use crontab for this purpose.
he can only take backup of database by exportingif u want that following user only perform full export of db then give
grant EXP_FULL_DATABASE role to them
Similar Messages
-
How to not Automatically Execute a BEX Query in CRM 7.0
We have configured a Bex Query (Template 7.x) to be executed in the Customer Interaction Center (CRM 7.0) and when we run it the report runs wide open without any user input. Does anyone know how we can force the variable screen to be displayed so the user can enter the desired selection criteria? If I open up the report using the BI URL it behaves as desired, but when it in rendered as a BI Report in CRM it runs wide open. Any help would be much appreciated.
Hello,
Please check the web template properties and select the show variable screen option. It should work fine after this.
BR,
Michael -
Error while executing a sql query for select
HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
19 PX COORDINATOR
18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1 -
Performance Issue Executing a BEx Query in Crystal Report E 4.0
Dear Forum
I'm working for a customer with big performance issue Executing a BEx Query in Crystal via transient universe.
When query is executed directly against BW via RSRT query returns results in under 2 seconds.
When executed in crystal, without the use of subreports multiple executions (calls to BICS_GET_RESULTS) are seen. Runtimes are as long as 60 seconds.
The Bex query is based on a multiprovider without ODS.
The RFC trace shows BICS connection problems, CS as BICS_PROV_GET_INITIAL_STATE takes a lot of time.
I checked the note 1399816 - Task name - prefix - RSDRP_EXECUTE_AT_QUERY_DISP, and itu2019s not applicable because the customer has the BI 7.01 SP 8 and it has already
domain RSDR0_TASKNAME_LONG in package RSDRC with the
description: 'BW Data Manager: Task name - 32 characters', data
type: CHAR; No. Characters: 32, decimal digits: 0
data element RSDR0_TASKNAME_LONG in package RSDRC with the
description 'BW Data Manager: Task name - 32 characters' and the
previously created domain.
as described on the message
Could you suggest me something to check, please?
Thanks en advance
Regards
RosaHi,
It would be great if you would quote the ADAPT and tell the audience when it is targetted for a fix.
Generally speaking, CR for Enteprise isn't as performant as WebI, because uptake was rather slow .. so i'm of the opinion that there is improvements to be gained. So please work with Support via OSS.
My onlt recommendations can be :
- Patch up to P2.12 in bi 4.0
- Define more default values on the Bex query variables.
- Implement this note in the BW 1593802 Performance optimization when loading query views
Regards,
H -
How to execute a sql query in VO????
Hi every body.
Can you show me the way to execute a sql query in VO.
For example: I have a viewobject1, and I add a new method void execSQL() before the last '}' of the java file of viewobject1 like this:
public void execSQL() {
String strSql = "Select sysdate from dual";
I want to execute strSql query and return a Resultset, how can I perform ???
Thanks a lot.The executeQuery method in ViewObjectImpl does not return a ResultSet.
ViewObjectImpl voImpl;
voImpl.setQuery(strSql);
voImpl.executeQuery(); -
Error while executing report from Query designer
Hi All,
When I am executing from query designer, I am getting following error.
Even I can't execute it from another portal where i created source system of BI server.
But i can execute queriew from Query analyser and t-code RSRT.
When I execute from Query desinger the url is as follows.
http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
And the error is:
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,*
Required information for reproduction according to note 948490.*
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
Operating System SunOS - amd64 - 5.10
REgards
MohanHi mohan ,
You can check these OSS notes for the issue .
1. 795699 - Customizing default error messages for HTTP
2. 807000 - Http requests are not fully read after timeout
3. 804124 - HTTP communication with XI Adapter Engine fails
Regards,
Lokesh -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
How to execute a BI query/view from a web dynpro application?
Hi all,
I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
Please guide me and help me achieve this.
Thanks & Regards,
KishanHi Kishan,
Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
Create the Technical System and connect with JCO Destinations
or
Connecting through the BI Connecters (ex: XMLA Connecter)
Refer below link:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
In this document you will get details related to connector and other admin activity.
Hope this may help you.
Deepak!!! -
JVM hangs while executing a sql query
My JVM hangs while I try to execute an update query. I am using JDBC thin client and Oracle 9i as database. Can someone please suggest what could be wrong.
I have a serious problem regarding the usage of Prepared Statement.
I am working on J2EE based application with the application server as Oracle 9ias.We have mostly used Prepared in 0ur queries.But one our application got implemented we are facing some strange problems.The first instance was a web page was getting hanged and does not give any results.But this had worked fine in all our testing environment.We analysed the table which it uses and still no result.Finally we changed prepared statement to statement and the result page came within seconds.
The second instance is the main issue.Again a query is getting hanged when we try to process it through the web page.We again tested it by converting from prepared statement to statement and its coming within seconds.
Can someone give me some input.Is there any databse parameter that is controlling this prepared statement or statement. -
Error while executing UNION ALL query
Hello everyone,
I'm executing the below query on Oracle 9.2.0.8 version.
select hdr.*
from ttl_hdr hdr, ttl_service ser
where hdr.cus_nbr = ser.cus_nbr
and hdr.dn in ('1232','2342',343','343')
union all
select hdr.*
from ttl_hdr_his hdr, ttl_service ser
where hdr.cus_nbr = ser.cus_nbr
and hdr.dn in ('1232','2342',343','343')
and I encounter following error:
ORA-01790: expression must have same datatype as corresponding expression
But instead of * if I'm specifying a list of few columns, it executes the query properly.
Can anybody tell me what the problem is ?
regards,
RossyHi,
All columns in your tables TTL_HDR and TTL_HDR_HIS are not with same data type.
I'm sure you get same error if you specify all columns that * brings.
Specify column names and use conversion function to get data type same to column from both selects.
PS: and I think this is not Application Express related
Br, Jari -
How to execute an SQL query present in a string inside an ABAP program?
hello,
How to execute an SQL query present in a string inside an ABAP programRaut,
You can execute Native SQl statements.
Ex: To use a Native SQL statement, you must precede it with the EXEC SQL statement, and follow it with the ENDEXEC statement as follows:
EXEC SQL [PERFORMING <form>].
<Native SQL statement>
ENDEXEC.
There is no period after Native SQL statements. Furthermore, using inverted commas (") or an asterisk (*) at the beginning of a line in a native SQL statement does not introduce a comment as it would in normal ABAP syntax. You need to know whether table and field names are case-sensitive in your chosen database.
In Native SQL statements, the data is transported between the database table and the ABAP program using host variables. These are declared in the ABAP program, and preceded in the Native SQL statement by a colon (:). You can use elementary structures as host variables. Exceptionally, structures in an INTO clause are treated as though all of their fields were listed individually.
If the selection in a Native SQL SELECT statement is a table, you can pass it to ABAP line by line using the PERFORMING addition. The program calls a subroutine <form> for each line read. You can process the data further within the subroutine.
As in Open SQL, after the ENDEXEC statement, SY-DBCNT contains the number of lines processed. In nearly all cases, SY-SUBRC contains the value 0 after the ENDEXEC statement. Cursor operations form an exception: After FETCH, SY-SUBRC is 4 if no more records could be read. This also applies when you read a result set using EXEC SQL PERFORMING.
EXEC SQL PERFORMING loop_output.
SELECT connid, cityfrom, cityto
INTO :wa
FROM spfli
WHERE carrid = :c1
ENDEXEC.
Pls. Mark If useful -
How to execute this SQL Query in ABAP Program.
Hi,
I have a string which is the SQL Query.
How to execute this sql Query (SQL_STR) in ABAP Program.
Code:-
DATA: SQL_STR type string.
SQL_STR = 'select * from spfli.'.
Thanks in Advance,
VinayHi Vinay
Here is a sample to dynamically generate a subroutine-pool having your SQL and calling it.
REPORT dynamic_sql_example .
DATA: BEGIN OF gt_itab OCCURS 1 ,
line(80) TYPE c ,
END OF gt_itab .
DATA gt_restab TYPE .... .
DATA gv_name(30) TYPE c .
DATA gv_err(120) TYPE c .
START-OF-SELECTION .
gt_itab-line = 'REPORT generated_sql .' .
APPEND gt_itab .
gt_itab-line = 'FORM exec_sql CHANGING et_table . ' .
APPEND gt_itab .
gt_itab-line = SQL_STR .
APPEND gt_itab .
gt_itab-line = 'ENDFORM.' .
APPEND gt_itab .
GENERATE SUBROUTINE POOL gt_itab NAME gv_name MESSAGE gv_err .
PERFORM exec_sql IN PROGRAM (gv_name) CHANGING gt_restab
IF FOUND .
WRITE:/ gv_err .
LOOP AT gt_result .
WRITE:/ .... .
ENDLOOP .
*--Serdar -
When trying to copy and paste on my MAC using firefox, I keep coming across a message "your browser security settings don't permit the editor to automatically execute pasting operations". This only happens with firefox, not Safari. any help??
See:<br />
http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
https://addons.mozilla.org/firefox/addon/852 - AllowClipboard Helper -
Queries: duplicate info when executing a HR query
Hi.
Friends, i trying to do a query with info of two infotipes: 21 and 482 (aditional info of it21), when i execute the query the result it's a cartesian product (wrong result).
For example:
DATA
IT21
PERNR Subty Name
1 10 ssssss
2 11 dddddd
IT482
Pernr subty identity card
1 10 5
2 11 6
Result
Wrong Result with cartesian product of the query:
PERNR subty name it482-subty it482-identity card
1 10 ssssss 10 5
1 11 dddddd 10 5
1 10 ssssss 11 6
1 11 dddddd 11 6
The correct result must be:
PERNR subty name it482-subty it482-identity card
1 10 ssssss 10 5
1 11 dddddd 11 6
I think that the join of the PNPCE logical database it's performed using just personel number (pernr), how could i solve this issue?
Thanks in advance.
Albio.-
Solved in HCM Forum: Re: Queries: duplicate info when executing a HR query
Edited by: Albio Manuel Vivas on Aug 16, 2011 7:35 PMI found where to put the switch, but it doesn't work.
I did this:
1) in the infogroup (tx sq02): goto/ code / data. Then i typed:
*$HR$ [P0482]
*$HR$ PRIMARY_INFTY = 'P0021'
2) save
3) verify
4) generate
Then i use the transaction S_PH0_48000513 - Ad-hoc-Query , and create a query, i save it, and execute, then the result it's wrong. I check the program generated by the query, and search for this text: 'hr-log' where are supposed that the code must appears, and the code that i added doesn't exits.
Any idea?
Thanks in advance.
Albio.-
Edited by: Albio Manuel Vivas on Aug 16, 2011 6:14 PM
Maybe you are looking for
-
Creation of delivery for subcontract Purchase Order
Hi All, I am trying to create delivery for subcontract PO. ME2O transaction creates delivery but doesn't link PO to delivery . Is there any SAP table where we can see link of subcontract PO to delivery created throug ME2O? Business don't want to use
-
All the images in my Speed Dial thumbnails have disappeared and I can't get them back.
All the images in my Speed Dial thumbnails have disappeared and I can't get them back. When I check the settings all the thumbnails have the site shown in the details so should be showing the site in the thumbnail, but they're just blank. I uninstall
-
Can't open files in CS6 from LR4
I just migrated CS6 and LR4 to a new iMac. I then re-installed CS6 from disc because the licensing didn't come over. So far so good. But now in LR4, when enter CMD-E, or choose "open in CS6" from the Edit menu, nothing happens. The file does not open
-
In FF 4.0 can I change the background color of the open tabs. Currently it is grey with black type. A lighter background would be easier to read. Thanks, TJH
-
A question regarding the limitations of using MS Access.
Hello everyone, my question is not one of a direct comparison between Access, SQL Server and mySQL, but is concerned with how much of JDBC 2.0's functionality I can implement using an Access 2000 database and a type 1 driver. Are there area's of JDBC