Automatic export of transport sets
Hi,
i want to export all pages as transport sets.
is there a way to create a job, script or something that would export transport sets for every page in portal automatically.. the portal is growing and thats make impossible to export every page, it takes time.
Creating pages all under one page group stricts search capabilities, because there isnt any option for searching pages (not page groups) in custom search portlets with results automatically displayed. (users can select page to search only)
Similar Messages
-
Oracle Portal export Transport Set
Hye Oracle Portal Guru's
I'm using Oracle Portal Version: 10.1.4.2.0 (Build: 197) in Solaris 5.9
may i know, is it we need to do export a transport set every time we want to do a backup of page group.
i.e i have a Page Group: My Page. Need i to export the transport set every time want to do a backup my page group.
Is there any automated way to do backup my page group using like scheduler or somethings.
Thanks,
RaoThere is a good note about this on the [url http://support.oracle.com]My Oracle Support website :
Note 738449.1 - How To Create A Page Group Transport Set With Command Line Tools?
Thanks,
EJ -
Hello,
According to Metalink Note 2166087.1 debugging can be enabled for Transport sets by editting utldbmgr.pks and setting DEBUG_MODE := true and then recompiling. I did this, but I don't see any additional information in the Logs shown in the Export/Import Transport Set Portlet. Are there other Logs somewhere else? The note doesn't specify where the debug logs are. Does debugging actually work for anyone?
I need debugging because I get a Precheck Warning for the Application and I cannot import the application but don't know why.
Thanks.Hi Snigdha,
I checked that too but there I only got directory for old month but not for current month /usr/sap/SID/JC00/j2ee/temp/pcd/transport/reports/Import/2011-02-02
Is that because I got "Access denied" for most of the object while importing ? but rest of the object status was "OK".
Thanks,
Saleem -
Transport Sets-Where are they?
Hi,
Where does the transport sets resides in physical? i mean which directory?
Regards,
CerenTransport set are stored in a set of tables(WWUTL_*) in the PORTAL schema.
When you export the transport set, a command file is generated.
You must execute this command file in order to produce a dmp file (relies on exp utility) -
Hi,
I'm using Oracle Portal 10.1.4, and I've successfully imported page groups into this portal before, but now when I try to do an import, I only see the following message in the 'Browse Transport Sets' page:
Import: Transport set created, exported, and submitted to background process for import.
This is true for new page groups and for page groups that should be replaced. Any ideas?
What is the background process? How do I get it started, if it has failed? How can I remove the transport set that is in this 'Import' status. Any help appreciated.
Thanks,
J.Hi J,
For me if this is happening is cause problably something hang on your side while doing the Portal Export / Import. Not sure how it happened but I've seen this happening for other persons. The easiest way is to clean up the Portal Transport Set tables. Upload the DMP to the Portal again and attempt to merge it again.
There is an out dated Note in the Metalink for this, but I'd basically submit a Service Request as Oracle Support may better help you on this matter and eventually update the old Note -- Note:177597.1 - How to clean up the Oracle Portal Transport Tables.
I hope it helps...
Cheers,
Pedro. -
Portal Transport Set(EXPORT) script not running.
Hi,
I have created a Instant portal(10 Appli Rel 2) which is on OS
[SUSE LINUX Enterprise Server 9 (i586) VERSION = 9 ] .
Now I want to create transport set and want to export that instant portal to another
SUSE LINUX server.
But the problem I am facing is that the script that is generating by the EXPORT WIZARD is
for UNIX which has .CSH extension.
So i am not able to rum that thing...as Linux use .SH .....can anyone help me to run that thing .......
ThanxDId you run the script to put the trasnport set ready for been include?
When you create a transport set, automaticaly you can get the dmp from it, but when you import it, you need to run the script that willmake a import in db level so you can import it in the portal, is like making two imports, one at portal, one at command line using the script, and you run it like script.cmd -mode import -s portalschema -c orcl -pu orcladmin -d filename.dmp where -mode indicate that is going to be an import, -c db SID name, -pu Portal User -d File created during export and -s db schema for portal.
Hope this helps.
Greetings -
Error while displaying Transport Sets
Dear All
I just imported a portal page group using import utility.
Now after this, when I click on Transport set name in Portal builder, it display
Error: Transport Set mycompany does not contain any objects. (WWU-52926)
Can you guys please tell me where is the mistake.
Morover, I am looking for a sample portal page group (script file and export dump file), that I want to deploy. So if anyone can please send me, I will really appreciate.
NeerajHi Yogesh,
I haven't installed any patch on my client machine.
Regards,
Dilip Kumbhar -
Problem in extracting from the import transport set
i am exporting all of the major page groups and providers from my source box to the target machine. both are using the same version database, app server and portal version 904.
for one of the biggest provider, i created transport sets in the export system, ran the script for NT to create a dump file. moved dump files to the import system, imported its transport set from this file. now i am trying to extract the imported transport set.
here i am facing problems one after the other.
1. first is this that this extraction from the import transport set is costing too much time. more than 36 hours have already passed and it has not finished.
2. it does seem to populate though as after several hours i see the log file with its lines showing a message like .... 'importing component ... so and so ... '. however, the whole process is not finishing or going fast. there is no other process running on this target box.
3. and surprisingly, the log files update the start time of the script every few hours.
can somebody please help? this is a very time-sensitive request.
thanks.Hi,
if i remember exactly i thought this error due to field selections in R/3 whatever the fields u have given in selection tab in rsa3 in ECC give the same selections while scheduling the infopackage than u can able to see the records in psa for full load.
after doing dis still problem persists revert me.
Regards,
shiva -
The time on my iphone is not being updated automatically, althought it is set that way. Why does it not update the time and why is it 10 minutes slow?
Thank you for your reply. I realy have nothing else to sync - no music. Emails do work so its just my contacts I am concerned about. I'm kinda new at this but have a working understanding of the system.
I have an icloud account but the Geek Squad went there and tried but could not export contacts. I truly am not that good re icloud. They worked exclusively with my itunes, re-downloading, etc - all of the stuff in their book.
I have not tried a complete restore because I am not sure I am that good with the equipment but could. I did all of the stuff on the help page - sync reset, forced one-way sync etc but the phone just does not seem to recognize the sync. I have not gone to an Apple store to have them have a look - that may be my next step to hook up to another itunes computer. It seems simple to me - it was working fine until maybe 3 months ago - probably when there was an update. Its telling to me that the phone does not tell me there is a sync in process while itunes is saying there is - its just not biting between the 2.
I appreciate any hep - and I said, I not stupidi about these things but have kind of reached as far as I am comfortable with fear of doing something really wrong. -
Moving Transport Set from 9.0.4 to 10.1.2.0.0 environment
Hi,
I am moving transport set from 9.0.4 environment to 10.1.2.0.0 environment.
But when I import it on 10.1.2.0.0 environment I get the compatibility error,
I am using imp.sh to import. Following error occurs when I try to import:
Checking for Portal Version Compatibility...
Error: Source and Target Portals are of different versions
Cannot proceed with Import
Could any one let me know, Is there any way to move the transport set from old version to the new one. Apart from upgrading the old one.
-SantoshSantosh,
No, sorry but there isn't a supported way of doing this.
Oracle Portal only allows you to use the Portal Export / Import between the same level of patching. Trying possible workarounds will lead you in an unsupported state.
The only way as you've said is to upgrade your older version to the same level of the newly installed version, ie, bring your 9.0.4 to 10.1.2.0.x.
Metalink Note:263995.1 - Master Note for OracleAS Portal Export / Import Issues may help you.
I hope it helps...
Cheers,
Pedro. -
Automatic export/import of ESR object
HI.
I want to automate export/import of ESR object.
How can I do?
1)export the ESR object on development system
(automatic import to QA sysytem)
2)activate the chang list on QAS
regards,U may perform the transport to QA using CMS. Or u may simply export the ESR objects as tpz file and import it in QA system.
Regards,
Prateek -
Automatic Export with SDK 3.0
Does anyone know how via a SDK 3.0 plugin to automatically export a photo that is in the catalog. For example I have a plugin to automatically import raw images as they are written to disk and I would then like to export them automatically.
Any ideas?In the API the LrExportSession object is defined as:
LrExportSession( params )
Creates an export session object. The session acts on a specific set of photos and settings, as when a session is started in the Export dialog.First supported in version 1.3 of the Lightroom SDK.
Parameters
1. params
(table) Arguments in named-argument syntax. All are required.
photosToExport (array of LrPhoto) A set of photos to be exported in this session.
exportSettings (table) A set of export settings for this session, as generated by the Export dialog.
Return valueAn exportSession object.See also
LrCatalog, LrPhoto
I can't seem to find what named items the exportSettings table can have to pass to create the LrExportSession object. Does anyone know where I can find that info? -
Transport Set includes another pagegroup
I am attempting to move a pagegroup between environments.
I am in the Portal Navigator on the source environment and select Export next to the pagegroup I want to move.
Once I have named the transport set, i get to the page where I can select the objects that appear in the transport set.
I start off with the pagegroup i am exporting at the top, with a list of dependencies below that I can select to add to the transport set.
But in that list is another pagegroup. There must be some dependency between the two but I can't work out what it is.
Anyone have any experience of this?
Or can anyone explain a good method to check through the pagegroup to find the dependency?Hi,
It is common Shared Objects page group be a dependency because of item types, templates, etc.
You can check if you have any page from another page group that is published as portlet in some page of your target page group.
Hope this helps,
Higor -
We get the following error message (the log is clean up to that point) when we import a tranport set to our new machine.
It is a clean export from the target and I have gone through Oracles trouble shooting documents.
Importing Items...
[07-01-05 11:44:49][Error: (WWU-74256)] context = (Fatal Error)WWUTL_API_IMPORT_PAGEGROUP.MergeTableForInsert user = PORTAL An unknown fatal error has occurred during the import of transport set. See the debug logs for details.
Context: (Fatal Error)WWUTL_API_IMPORT_PAGEGROUP.MergeTableForInsert trigger: wwsbr_that_briud_trg.select wwv_subtypeattributes: No data found wwnls_api.add_string: wwnls_api.add_string: wwnls_api.add_string: wwnls_api.add_string: wwnls_api.add_string: wwnls_api.add_string: wwpth_api_private.get_page_and_page_group_id: Context
Any ideas?Hi Lax,
I have never seen this. Have you tried to get help from the Oracle Support Services via the Metalink website (http://metalink.oracle.com)?
It seems to me that there is an ORA-1403 somewhere due to a query being done by the Portal Export / Import. Oracle Support may try to help you a bit further and even they may try to reproduce your problem.
Also useful would be to say the Oracle Database version from both Source and Target Portal databases.
I hope it helps...
Cheers,
Pedro. -
How to Export local security setting all filed name & value against filed.
HI all,
I am trying to export local security setting from local policy using bellow scrip. but it is showing only these are configured. I need expert help which allowed me to export all filed with value where it is configure or not. Please give me.
$output=@()
$temp = "c:\"
$file = "$temp\privs.txt"
[string] $readableNames
$process = [diagnostics.process]::Start("secedit.exe", "/export /cfg $file /areas USER_RIGHTS")
$process.WaitForExit()
$in = get-content $file
foreach ($line in $in) {
if ($line.StartsWith("Se")) {
$privilege = $line.substring(0,$line.IndexOf("=") - 1)
switch ($privilege){
"SeCreateTokenPrivilege " {$privilege = "Create a token object"}
"SeAssignPrimaryTokenPrivilege" {$privilege = "Replace a process-level token"}
"SeLockMemoryPrivilege" {$privilege = "Lock pages in memory"}
"SeIncreaseQuotaPrivilege" {$privilege = "Adjust memory quotas for a process"}
"SeUnsolicitedInputPrivilege" {$privilege = "Load and unload device drivers"}
"SeMachineAccountPrivilege" {$privilege = "Add workstations to domain"}
"SeTcbPrivilege" {$privilege = "Act as part of the operating system"}
"SeSecurityPrivilege" {$privilege = "Manage auditing and the security log"}
"SeTakeOwnershipPrivilege" {$privilege = "Take ownership of files or other objects"}
"SeLoadDriverPrivilege" {$privilege = "Load and unload device drivers"}
"SeSystemProfilePrivilege" {$privilege = "Profile system performance"}
"SeSystemtimePrivilege" {$privilege = "Change the system time"}
"SeProfileSingleProcessPrivilege" {$privilege = "Profile single process"}
"SeCreatePagefilePrivilege" {$privilege = "Create a pagefile"}
"SeCreatePermanentPrivilege" {$privilege = "Create permanent shared objects"}
"SeBackupPrivilege" {$privilege = "Back up files and directories"}
"SeRestorePrivilege" {$privilege = "Restore files and directories"}
"SeShutdownPrivilege" {$privilege = "Shut down the system"}
"SeDebugPrivilege" {$privilege = "Debug programs"}
"SeAuditPrivilege" {$privilege = "Generate security audit"}
"SeSystemEnvironmentPrivilege" {$privilege = "Modify firmware environment values"}
"SeChangeNotifyPrivilege" {$privilege = "Bypass traverse checking"}
"SeRemoteShutdownPrivilege" {$privilege = "Force shutdown from a remote system"}
"SeUndockPrivilege" {$privilege = "Remove computer from docking station"}
"SeSyncAgentPrivilege" {$privilege = "Synchronize directory service data"}
"SeEnableDelegationPrivilege" {$privilege = "Enable computer and user accounts to be trusted for delegation"}
"SeManageVolumePrivilege" {$privilege = "Manage the files on a volume"}
"SeImpersonatePrivilege" {$privilege = "Impersonate a client after authentication"}
"SeCreateGlobalPrivilege" {$privilege = "Create global objects"}
"SeTrustedCredManAccessPrivilege" {$privilege = "Access Credential Manager as a trusted caller"}
"SeRelabelPrivilege" {$privilege = "Modify an object label"}
"SeIncreaseWorkingSetPrivilege" {$privilege = "Increase a process working set"}
"SeTimeZonePrivilege" {$privilege = "Change the time zone"}
"SeCreateSymbolicLinkPrivilege" {$privilege = "Create symbolic links"}
"SeDenyInteractiveLogonRight" {$privilege = "Deny local logon"}
"SeRemoteInteractiveLogonRight" {$privilege = "Allow logon through Terminal Services"}
"SeServiceLogonRight" {$privilege = "Logon as a service"}
"SeIncreaseBasePriorityPrivilege" {$privilege = "Increase scheduling priority"}
"SeBatchLogonRight" {$privilege = "Log on as a batch job"}
"SeInteractiveLogonRight" {$privilege = "Log on locally"}
"SeDenyNetworkLogonRight" {$privilege = "Deny Access to this computer from the network"}
"SeNetworkLogonRight" {$privilege = "Access this Computer from the Network"}
$sids = $line.substring($line.IndexOf("=") + 1,$line.Length - ($line.IndexOf("=") + 1))
$sids = $sids.Trim() -split ","
$readableNames = ""
foreach ($str in $sids){
$str = $str.substring(1)
$sid = new-object System.Security.Principal.SecurityIdentifier($str)
$readableName = $sid.Translate([System.Security.Principal.NTAccount])
$readableNames = $readableNames + $readableName.Value + ", "
$output += New-Object PSObject -Property @{
privilege = $privilege
readableNames = $readableNames.substring(0,($readableNames.Length - 1))
#else = $line."property"
$outputAs an alternate approach wee can preset the hash and just update it. This version also deal with trapping the errors.
function Get-UserRights{
Param(
[string]$tempfile="$env:TEMP\secedit.ini"
$p=Start-Process 'secedit.exe' -ArgumentList "/export /cfg $tempfile /areas USER_RIGHTS" -NoNewWindow -Wait -PassThru
if($p.ExitCode -ne 0){
Write-Error "SECEDIT exited with error:$($p.ExitCode)"
return
$selines=get-content $tempfile|?{$_ -match '^Se'}
Remove-Item $tempfile -EA 0
$dct=$selines | ConvertFrom-StringData
$hash=@{
SeCreateTokenPrivilege =$null
SeAssignPrimaryTokenPrivilege=$null
SeLockMemoryPrivilege=$null
SeIncreaseQuotaPrivilege=$null
SeUnsolicitedInputPrivilege=$null
SeMachineAccountPrivilege=$null
SeTcbPrivilege=$null
SeSecurityPrivilege=$null
SeTakeOwnershipPrivilege=$null
SeLoadDriverPrivilege=$null
SeSystemProfilePrivilege=$null
SeSystemtimePrivilege=$null
SeProfileSingleProcessPrivilege=$null
SeCreatePagefilePrivilege=$null
SeCreatePermanentPrivilege=$null
SeBackupPrivilege=$null
SeRestorePrivilege=$null
SeShutdownPrivilege=$null
SeDebugPrivilege=$null
SeAuditPrivilege=$null
SeSystemEnvironmentPrivilege=$null
SeChangeNotifyPrivilege=$null
SeRemoteShutdownPrivilege=$null
SeUndockPrivilege=$null
SeSyncAgentPrivilege=$null
SeEnableDelegationPrivilege=$null
SeManageVolumePrivilege=$null
SeImpersonatePrivilege=$null
SeCreateGlobalPrivilege=$null
SeTrustedCredManAccessPrivilege=$null
SeRelabelPrivilege=$null
SeIncreaseWorkingSetPrivilege=$null
SeTimeZonePrivilege=$null
SeCreateSymbolicLinkPrivilege=$null
SeDenyInteractiveLogonRight=$null
SeRemoteInteractiveLogonRight=$null
SeServiceLogonRight=$null
SeIncreaseBasePriorityPrivilege=$null
SeBatchLogonRight=$null
SeInteractiveLogonRight=$null
SeDenyNetworkLogonRight=$null
SeNetworkLogonRight=$null
for($i=0;$i -lt $dct.Count;$i++){
$hash[$dct.keys[$i]]=$dct.Values[$i].Split(',')
$privileges=New-Object PsObject -Property $hash
$privileges
Get-UserRights
A full version would be pipelined and remoted or, perhaps use a workflow to access remote machines in parallel.
¯\_(ツ)_/¯
Maybe you are looking for
-
Apple TV 2 Library Not Available
I have two Apple TV in the house with the same problem. When I first turn on either Apple TV and try to select music or a movie from my computer, I get the message that no music or movies are loaded for this library. I tried resetting apple TV, upgr
-
Upgdating GeForce 8800 GT Drivers?
Found it. Sorry. Anyway to delete this post?
-
Hello- I recently purchased some albums and songs from ITunes and enjoyed them on my iPhone but recently, they show in the search of music( but in gray) but with no art and won't play. Also they appeared on my other devices, which is cool and they wi
-
How to View Smart Form in Portal?
I am not able to view the Smart Form in Portal. can any one give a soluton to this?
-
Can't use Kuler on Illustrator CC
I've signed an annual Adobe CC and I have a valid Adobe ID. But I can't use Kuler on Illustrator CC and I'm receiving a message that there's no valid Adobe ID saved. How can I use Kuler again?