Automatic failover not currently supported by WebLogic JMS?
Hi,
does this apply to Weblogic 8.1 as well? When will automatic failover be implemented?
Thanks,
A.
Hi,
You can setup a "node manager" process to automatically
restart a failing server, but there is no automatic
fail-over to a new machine.
To achieve automatic failover use
third party HA framework software and disk replication
software such as is supplied by Veritas. I'm not aware
of any plans to add automated fail-over to the next release.
Tom
Iggy wrote:
> Hi,
>
> does this apply to Weblogic 8.1 as well? When will automatic failover be implemented?
>
> Thanks,
>
> A.
>
>
Similar Messages
-
Movement type 647 does not currently support serial numbers management
we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
VickyCheck this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi -
HTTP Server is not currently supported with Solaris 10
I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10).
I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did. Now I can't start the HTTP server and I've found on metalink that 'HTTP Server is not currently supported with Solaris 10, this is targeted for Q2CY05'.
Has this been fixed yet?
Thank you for your time.
DanielDHi james,
I have checked the log file but i am unable to find what to do next.
I am giving the small piece of content of the log file. The following messages are repeating again and again...
Log content:-
07/09/23 17:20:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:26 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:22:30 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:40 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:24:44 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:36 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:26:42 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:28:57 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd
07/09/23 17:29:01 Start process
/dev011/oracle/product/10.1.3.1/OracleAS_1/Apache/Apache/bin/apachectl startssl: execing httpd -
Target does not currently support account discovery
What does the message "Target does not currently support account discovery" means?
I am getting it while using OPAM REST API to get the accounts from a given resource.
How can I make it support it?
TIA
LeoI would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.
-
"duplicate member names within data preview are not currently supported"
When I clicked "Preview Data" it altered "duplicate member names within data preview are not currently supported".
What's that mean?
And I can not find anywhere to set "duplicate member names" option :(
I'm using EAS 11.1.2I am very sad to find that "You can change false to true but cannot change true to false".
-
There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?
Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do. -
Pls hlep, Error message "we don not currently support clop or blob column"
I currently use the Oracle SQL Developer Ver.2.1-32 Bit on Dell PC.
After I got the query result,I got the problem ; Disable to Export to any file type, there is message "No valid columns available for export, we don not currently support clop or blob columns"
Remark : I don't have problem if use select *, but if I select some columns and add where condition the this message error will pop-up.
Sample of my query as below attachment
SELECT ColumnName_1, ColumnName_2, ColumnName_3 FROM TableName1
WHERE UPDATE_DATE >= to_date('2011-02-10 01:00:00', 'YYYY-MM-DD HH24:MI:SS')
AND ColumnName_1 IN 'xxx'
group by ColumnName_1, ColumnName_2, ColumnName_3 ;
SELECT ColumnName_1, ColumnName_2, ColumnName_3,COUNT(*) FROM TableName1
WHERE UPDATE_DATE >= to_date('2011-02-10 01:00:00', 'YYYY-MM-DD HH24:MI:SS')
AND ColumnName_1 IN 'xxx'
group by ColumnName_1, ColumnName_2, ColumnName_3
HAVING COUNT(*)>2 ;Last confirm question.
Can I download the new version latest 3.0 EA4 for free ? Is this SW is free download, isn't it ?
If yes, Pls suggest the link to download for me pls.
Remark :
I'm working for Seagate Thailand company, my current officail version from company download link is Ver.2.1.1.64.
Thank you in advance for your support. -
Movement type 101 does not currently support
Dear Experts
there is an error occur at the Time of MB31 with 101 Movement type
Movement type 101 does not currently support serial number Management.
Rgds
PankajHi
Serialization config is missing for 101.
Check in below config
spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
Check with the help of PM or CS consultant
Regards
Antony -
Movement type 101 does not currently support serial
Hi experts,
I'm trying to realize MIGO for a PO with a material with serial number.
The error msg is " Movement type 101 does not currently support serial number Management." IO306
I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
And
Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
And assigned the material to attributes ate MM02.
I have know ideia what else i have to do.
Is there anone here already see that?
Tks
Antonio Oliveiratry posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
Movement type 101 does not currently support
yogesh -
Movement type 317 does not currently support serial number management
Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi -
Movement type 124 does not currently support serial number management
Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
JohnUnfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible. -
IS XI Support BEA Weblogic JMS Queue
Hi
I have a scenario where i have to send and recive message from the Weblogic JMS Queue ..
Is XI support Weblogic JMS Queue ..if it is which tranport protocol i have to use to connect to Weblogic queue
SVHi
Thanks Ravi..
U mean to say i have to use the Transport Protocol
Access JMS Provider with JNDI
I have few more questions like ..
what needs to filled in Connection parameters:
JNDI Look up name of Queue Connection Factory:
JNDI Look up name of JMS Queue:
Name of JNDI Initial Context Factory:
JNDI Sever Address:
JNDI Logon User:
JNDI Logon Password:
When i selected the Protocol some default Values came in do i have have to change any thing
JNDI Look up name:
JNDI Look up name of JMS Queue:
Name of JNDI Initial Context:
as u mentioned in Server address i will put : t3://server:XXX
and i have given the user id and Password ..
the user id and password is same for both JNDI logon and JMS Queue User..
SV -
The pdf file you selected is not currently supported
I keep receiving this message when I try & use the fill & sign option on documents. It was not happening yesterday. What would cause this issue?
I'm having the same issues. Frustrating!
-
other games says this also. firefox is my default browser. Its up todate but yet tells me its on old version I have download the newest Firefox 7 I even deleted and re installed when I go to play some games on facebook this is what it says . Please help me. Thank
Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
I have seen the answer posted, but either do not understand it or cannot make it work properly. about:config goes nowhere, cannot find a place to change security level to 0, and by the way, not sure I want to, but I MUST be able to use Dazzle to post my books. (This is my business, online bookseller). And SOON! I'm behind due to this problem, and supposed to leave town Thursday!
I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
Which Google site did you search?
Maybe you are looking for
-
Hi all, my external hardrive is no longer being recognized on my Macbook pro after I tried to transfer some documents from another Macbook( that used the Lion operating system) to mine. i'm currently using the Mac OS X 10.6.8. Any suggestions on how
-
(VC707 board) How to use an Ethernet on XPS tool.?
Hello. I'm participating in a project that compose a microblaze-based etherent system . For this project, I'm using the Xilinx EDK. Then, I met a problem, yesterday. On the EDK XPS tool, the implementation process was failed, because of the axi_ether
-
Problem running WebLogic as plugin for SunOne web server on Solaris
I tried to set up WebLogic (8.1) as plugin for SunONE (iPlanet) web server. I followed instraction from http://e-docs.bea.com/wls/docs81/plugins/nsapi.html#110496. SunONE server start up successfully. But I have problem to connect my web application,
-
Posting settlement rules in IW32
Hi Everyone, I have to update settlement rule in IW32 for a particular service order without using batch input.Is there any function module to do that or any BAPI? Can I add events to Business object BUS2088 and use Workflow or FM to update? Thanks i
-
How to install Elements 13 to Macbook without disk drive?
I just recently got a macbook and I want to install Elements 13, but I am not sure how without a disk drive. I am clueless at this point!