Automatic File Transfer

I am looking for a way for text files to be moved from a source folder to a designated folder after it has been placed in an Indesign document. That way the same text file is not inadvertently placed more than once. Any suggestions if this can be done?

Srikenth,
Assuming you are asking this inthe context of reports output(!), you can use destype=ftp. Please refer to OTN reports page - pluginXchange
http://otn.oracle.com/products/reports/pluginxchange/content.html
You can use distribution to send to multple destinations of the same reports output when it is generated. Please refer to publishing reports document
http://otn.oracle.com/products/reports/htdocs/getstart/docs/a92102_01.pdf
Thanks
The Oracle Reports Team

Similar Messages

  • Automatic File Sync/Transfer to PC/E-Mail etc.

    Hi,
    I have the following request/problem for my nokia 6280.
    Some days ago I "discovered" the voice recording feature, which I now using more than 20 times a day. I send them to my secretary and she executes my orders.
    Now I want to automize this file transfer. I want every time, that the phone has a bluetooth connection with my pc and the contacts and so on were automaticly synced, that this recording files also synced or better transfered to a windows drive or file directory or send by email or whatever. The main issue is that my secretary gets this files automaticly.
    Any Ideas?
    Thanks
    HoGo

    A PC app could be written using the Nokia PC Suite API to detect when a phone is connected, then copy any files (in directories/folders accessible via PC Suite) off the device and do whatever you want with them (such as sending them as email attachments).
    The PC Suite API is available from Forum Nokia:
    http://forum.nokia.com/info/sw.nokia.com/id/bd896b31-92ba-4624-aa9d-ebf732e7cc0d/Nokia_PC_Suite_Conn...
    Message Edited by petrib on 16-Nov-2006
    03:56 PM

  • Automatically accepting file transfer via Bluetooth?

    I'm often sending files from my cellphone to the Mac.
    Alas, for each file I must again click "accept" in the Bluetooth File Exchange dialog. It is especially annoying since sometimes I do not even sit in front of the computer and just want to clear my phone's memory from afar.
    Is there any way to have the files accepted to be received automatically?
    Thanks!

    What you need to do is the following:
    On your blackberry:  Browse to Media, and select, pictures (for example), now press the menu button while in pictures and select "receive using Bluetooth"  Now send a file from your mac using the bluetooth file transfer.  This will work - if it doesn't then there may be an issue with either your mac or bb.  Let me know if you need further instructions.  Good luck.

  • When upgrading to OSX Yosemite do all my programs and files transfer over such as Office for mac, saved documents from word,excel,pics,pdf files,etc.etc...

    Will all my files transfer over (or stay) automatically right after upgrading to Yosemite or do I have to backup every single desired program or document? Question is do I HAVE to please if you can answer if its mandatory or not. Not looking for recommendations that I SHOULD back up or anything like that just want to know if it is mandatory to perform a backup to be able to keep or transfer all my current programs and apps and documents currently on my MB Pro Retina.

    Yes, upgrading to Yosemite will not touch your 3rd party apps or files in the Home folder.
    Although not mandatory you should have a a backup of your hard drive regardless if you upgrade to Yosemite or not.  To not have a backup is just playing  Russian roulette as there are only two types of hard drives;  those that have failed and those that will.

  • SRM MDM: Workflow Unlaunch while performing the Automatic data transfer

    Hi,
    We are trying to import some data from R/3 4.6 C by configuraing remote system as ERP and creating Port based based on the XML Schema in the SRM MDM Catalog. We have created work flow to validate the above pulled data accuracy into data manager. Everything goes well here, I am able to get the data transfered into data manager Automatically But the only issue is in the Work flow.
    Set workflow into data manager is not able to launch automatically even though the record is accurate via automatic transfer. I have accuratly set the wokflow name in import manager while svaing the MAP file for automatic import.
    Please have your inputs why the work flow is not able to launch in automatic data transfer from the specified port.
    Thanks/Pawan

    Hi Pawan,
    please check in the Data Manager, that you selected by the workflow, the right Trigger Actions, such as Record Import. And that the Autolunch is also set correcly.
    Regards,
    Tamá

  • File Transfer Protocol

    Hi,
    For my project, am curretnly storing the files in local xi server directory.  We need to ask the client for a FTP server information.
    In order to achieve this, is it enough to ask just the file server name and port followed by user name and pwd.
    As i have seen some parameters in file communication channel like connect mode and transfer mode, do i need to check these things also.
    Just let me know the parameters i need to get it from the client to implement a file sender or receiver communical channel which is of FTP and not NFS.
    Regards,
    B.Anandh

    Hi,
    have u read the information provided in link.
    ●      Connect Mode make it permanent.
    ○       Permanent
    An existing connection to the FTP server is used permanently.
    The connection is reestablished automatically if it is lost on the server side.
    ○       Per File Transfer
    A new connection to the FTP server is established for each file transfer.
    ●      Transfer Mode
    Set the FTP connection transfer mode to Text or to Binary.
    Thnx
    Chirag

  • Alert Configuartion for File Transfer

    Hello,
            I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
    1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
    2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
    One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
    Thanks.
    Regards,
    Mayank

    Hi,
    With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
    Refer
    XI : How to Re-Process failed XI Messages Automatically
    XI :  How to Re-Process failed XI Messages Automatically
    XI: Alerts - Step by step
    The specified item was not found.
    For successfull messages there will not be the alert notification  available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
    Thanks
    swarup

  • File transfer speed when on battery power

    Hey there - I've noticed that my file transfer speed is ridiculously slow when i'm not plugged in to a power source. Even when my battery is fully charged it's super slow. This happens not only when I'm uploading files from a memory card to my computer but when I'm attaching files to an email, or even sending an email.  I've asked other mac users and they say this is not the norm for their machines....any ideas?
    thanks!
    Sunny

    additionally, you can disable power menagement for your wireless card completely through iwconfig's power option. I suggest you read the manpage for iwconfig, I have quotes the 2 related options for you.
    txpower
    For cards supporting multiple transmit powers, sets the transmit power in dBm. If W is the power in Watt, the power in dBm is P = 30 + 10.log(W). If the value is postfixed by mW, it will be automatically converted to dBm.
    In addition, on and off enable and disable the radio, and auto and fixed enable and disable power control (if those features are available).
    Examples :
    iwconfig eth0 txpower 15
    iwconfig eth0 txpower 30mW
    iwconfig eth0 txpower auto
    iwconfig eth0 txpower off
    power
    Used to manipulate power management scheme parameters and mode.
    To set the period between wake ups, enter period 'value'. To set the timeout before going back to sleep, enter timeout 'value'. You can also add the min and max modifiers. By default, those values are in seconds, append the suffix m or u to specify values in milliseconds or microseconds. Sometimes, those values are without units (number of beacon periods, dwell or similar).
    off and on disable and reenable power management. Finally, you may set the power management mode to all (receive all packets), unicast (receive unicast packets only, discard multicast and broadcast) and multicast (receive multicast and broadcast only, discard unicast packets).
    Examples :
    iwconfig eth0 power period 2
    iwconfig eth0 power 500m unicast
    iwconfig eth0 power timeout 300u all
    iwconfig eth0 power off
    iwconfig eth0 power min period 2 power max period 4
    website with the current manpage:
    http://linux.die.net/man/8/iwconfig
    or simply:
    $ man iwconfig
    Last edited by stefanwilkens (2010-09-13 11:11:37)

  • Backed Up Music/Missing Music/Ipod File Transfer

    Hi there!
    I recently rebooted my computer (Windows XP) back to factory settings, which obliterated my iTunes. I had backed up my files (or so I thought) by saving my "iTunes" folder from the "My Music" folder onto an external hard drive--as suggested by the New York Times tech section. When I rebooted, reinstalled my iTunes start up disk from 2005, and transferred my music back into the correct folder, very few songs seemed to have survived the transfer--including none of my purchases and none of my playlists.
    When I then updated iTunes to the current version, all my playlists and my entire library came back, but often in name only. Many, many songs--including many purchases--now have little exclamation points next to them that indicate that iTunes cannot find the original file, yet they are listed, thus taunting me that iTunes knows I own them, but refuses to cooperate. This is true both when the external drive is plugged in and when it's not. In addition, the blocks of songs that made it versus those that didn't seems very random--it's a mix of downloads from early on, recent trips to the iTunes store, and in between.
    I know that it is my responsibility to back up my music, but I thought I had taken appropriate precautions. I have read in a few other postings about the option to select File-->Transfer Purchases from Ipod (all of my purchased music is alive and well on the ipod), but nothing really seems to happen when I do this. How do I know if it's working? Is there a trick to using this tool? Having tried it, I have seen no removal of the exclamation points, and I'm worried to do it wrong in case iTunes erases my ipod as well.
    Any pointers or assistance would be very greatly appreciated!

    hmmm... ok, so iTunes has updated itself to version 8.2 something since i first reinstalled the 2005 version, so i think it's entirely current. i am happy to remove this version of itunes and start over without reinstalling the 2005 version, if you think that will help. i'm just not sure exactly how to go about doing that. i'm also not sure how to get around this full disk warning, as it also happens when i add the library to the desktop rather than try to work from the external HD (which, it seems to me, should give it the full use of my internal hard drive to operate, which is far from full).
    so, let's say that uninstalling and restarting iTunes won't save me or my music. how do i then go about returning the music to itunes from my ipod? i'm so sorry for the peppering of questions, i really am a technologically lost cause...
    to clarify:
    1. should i uninstall my iTunes and start over?
    2. if yes, how do i do this without the 2005 start up disk?
    3. if i do this and my music doesn't seem to automatically recover, should i then try the shift option?
    4. how do i get around the "full disk" warning message if it continues to happen?
    5. if everything else recovery-based fails, how do i transfer my purchased files from my ipod to my itunes if nothing seems to happen when i try file-->transfer from ipod?
    thank you both so, so much!

  • Skyp file transfer on LAN slow for windows and Mac...

    Hi,
    We are extensively use skype and since we upgrade skype to 6.18 and above ... file transfer on LAN is super slow... to transfer file 200MB it took over 15 minutes but when i'm skype 6.16 it took about 45 seconds... can anyone lemme know to fix it or tweak it on both Mac and windows so i can speed up file transfer on LAN....

    I've been experiencing the same issue. I keep having to downgrade to 6.16 and cancel automatic updates for this same reason. It's really frustrating as my work involves sendig and receiving files via Skype. Versions 6.18 and up not only are too slow (a large file, for example, that would normally take 18 hours or less to transfer takes 1 week! on 6.18 and higher) but also slow down my whole connection while surfing. 6.16 allows me to transfer at a fast speed and I can watch videos and have a 256k livestream radio going, be on a skype call and still have enough speed to download from the Internet without slowing anything down. This is completely unacceptable. I see that no one has replied to this and nothing has been done to fix this issue. I wonder if Skype even browses through these. 

  • IChat have file transfer manager?

    Does iChat in Leopard AND Tiger have a file transfer manager in case file transfer gets interrupted? Thanks

    Legaleye30000 wrote:
    Well this is what I'm trying to do:
    -If something happens and disconnects and we later come back to our computers and see that it failed, can we resume from where the file got disconnected instead of starting all over again?
    I do believe this is possible. As long as you don't move the file or anything like that, it should continue where it left off. The person sending the file has to send it again, and the person on the other end must accept it. It won't start automatically (unless you somehow tell iChat to auto accept files).

  • Tiger Updates Have Broken Airport Appleshare File Transfer, Horribly Slow

    Big horrible slowdowns in file transfer over wireless have me pulling my (remaining) hair out. I have seen several other posts and here are results of what I found. Hope you can add some suggestions.
    I had given my Apple Airport base station (b) to my brother in Pakistan after I found a Belkin (g) at Staples for free (after rebates) and have been using it for a while (maybe almost 2 years). Not a pretty box but the price is beautiful and it works OK.
    My real use for it is for my eMac and a couple of older PowerBooks I keep downstaors as a "music studio" for my music and podcast recording (and transferring upstairs to my server folder over wireless) and web browsing.
    All worked OK as I would transfer the files to my PowerBook upstairs (connected Ethernet to a router connected to the wireless router or sometimes directly via Airport connection if laptop was not at my desk). Both configurations worked fine (only limitation being my eMac's (b) speed older Airport speed).
    Since 10.4.4 or 10.4.5 (as that is the last "change" I can see made on my system overall, I have discpovered I cannot even transfer a 3.5 MB file from the 10.4.5 eMac to ANY of the other machines.
    After reading several threads here it seems several people have noticed the HORRIBLE SLOWDOWN if not complete death of Airport usability for file transfer. People are being made to go around changing router settings, channel IDs etc. That sounds like typical tech support bunk to me.
    After all, if the channel ID on the wireless router is a problem why is my web browing going on at normal speed but a 120 MB file transfer just told me it will take 2023642128 hours. No, I am not kidding. That is the time it would take to get man to Mars.
    Someone else was told to hook up the machines over Ethernet. Sure, that works for machines in the same room - and is a bearable temporary solution in that case - but not in an upstairs/downstairs situation. Burning CD-Rs to transfer 120 MB files every time is also not a good way to show off Apple technology.
    So, in my humble opinion, some recent update from Apple just broke something in Airport networking or Appleshare. So, I did some more testing.
    I love Apple, getting friends to switch all the time, but annoyed at these bugs that basically render standard applications unusable. So far I have not been able to figure out what the problem is. Here is some more info I got.
    I already deleted all the network port configurations on the 10.4.5 eMac except wireless. Activity Monitor shows 0.1 to 11 kbps speed (yes, that is 0.1 to 11 Kbps not Mbps). No other apps are running, Tried connecting to different machines. All machines can transfer data at high speed except over Airport/wireless.
    I then fired up a PowerBook G3 500 10.3.9. It is slow as a machine, but it has no problems picking and dropping files on to other machines over Airport (it is sitting in the same area as the emac so signal etc. issues would effect them equally).
    Next I came upstairs and changed my 10.4.5 PowerBook G4, previously working perfectly on Ethernet,to Airport only use. Lo and behold, it could not go to the Internet nor could it do any AppleShare transfers even with a PowerMac G4 which is Ethernet only.
    There could still be two culprits, the Apple 10.4.5 update OR maybe the wireless router went bad. So I tried all of the above after changing channels on the Belkin router. Still no luck.
    It could still be the router, so:
    - I changed the HP 17" 8080 laptop from Ethernet to wireless only and it flies.
    - I switched the PowerBook G4 BACK to Ethernet and it flies.
    - I kept the PC laptop on WIRELESS and did file transfers from it to the now ETHERNET using PowerBook G4 and it works fine even PowerBook to PC and PowerBook to PowerMac both using Ethernet and 10.4.5 works fine too.
    - I now tried to get or put files from the 10.4.5 ETHERNET PowerBook G4 to PowerBook G3 10.3.9 WIRELESS and it worked fine. i.e. no problems with older OS one using wireless.
    - Then I tried 10.4.5 PowerBook G4 Ethernet to eMac wireless 10.4.5 and it would not take or drop a file, unless I was willing to wait for 3 years and 2 months.
    In other words - the ONLY common thread is that 10.4.5 with wireless/Airport use will break Appleshare file transfers.
    Obviously some planetary confluence did not suddenly corrupt all the settings in all my computers at the same as many others, who also happen to be using 10.4.5 or maybe 10.4.4 because the 10.3.9 using OLD PowerBook with 512 MB RAM does wireless file transfers faster than the 10 times faster Macs using Apple's own cards and newest software.
    Seems like a now-becoming-usual Apple update that breaks things.
    Hope you can suggest a solution so I do not have to burn CDs on the eMac for every 1 MB file I need to transfer upstairs.
    Imran

    Oosted on macfixit.com Friday, February 24 2006 @ 09:30 AM PST
    Mac OS X 10.4.5 (#9): Another fix for network slowness -- re-applying the combo updater; SIIG FireWire card not working; more
    Another fix for network slowness -- re-applying the combo updater Over the past few days we've outlined a number of fixes for network slowness that occurs after the update to Mac OS X 10.4.5, including entry of a DNS address, toggling of IPv6 and more.
    We've now received notes indicating that a tried and true workaround for various issues -- re-applying the Mac OS X 10.4.5 combo updater (as noted in our general workarounds for 10.4.5) -- can have beneficial effects in this case as well.
    MacFixIt reader Fred Moore writes:
    "After much thrashing about and wasted time, I appear to have solved both the slow web page loading as well as my email sending problems in one stroke. Guess how: download the Mac OS X 10.4.5 combo updater and reapply it. This nonsense has cost me a lot of time but everything seems to work now. IPv6 is set back to Automatic, there is no entry in the Network prefs DNS server field, and my email sending works perfectly (so far; I've sent a bunch of tests). Why didn't I just download the combo updater and apply from my hard drive at the beginning? Well, Software Update should (yes, I know, I know...) work. I'll never again use Software Update for a system update."

  • File transfer from PC to MAC

    I am planning on switching to a MAC from windows. I was going to use an external hard drive to move my files from my pc but noted that the external must be formatted for MAC use. How can accomplish file transfer without difficulty?

    Transferring via a Windows formatted hard drive is a good method.  You might also take a look at the Windows Migration Assistant.
    http://support.apple.com/kb/ht4796
    "Migration Assistant automatically transfers your contacts, calendars, and email accounts and more, and puts them in the appropriate applications."

  • Connect Mode: Permanent Vs Per File Transfer

    Hi,
    Did browse to know the pros and cons of both. SAP help was not much of help .
    Though most of them recommend PerFileTransfer, I want to know more about permanent.
    There should be some reason or scenario where permanent mode can be used,.
    Regards
    Krish

    Hi Krish,
    Connect Mode u201CPermanentlyu201D: If you select u201CPermanentlyu201D, an existing connection to the FTP server is used. The connection is reestablished automatically if it is closed by the server. Use this mode if you are very frequently using ftp connection (reading / writing to ftp server).
    Connect Mode u201CPer File Transferu201D: If you select u201CPer File Transferu201D, a new connection to the FTP server is established for each file transfer. Use this mode if using less frequently using the ftp connection (reading / writing to ftp server).
    Letu2019s take two scenarios:
    1. FTP channel is polling every 10 second then go for Connect Mode u201CPermanentlyu201D. Because the over head of creating new connection (Connect Mode u201CPer File Transferu201D) will be more.
    2. FTP channel is polling every 1 hour then go for Connect Mode u201CPer File Transferu201D. Because it does not make sense to hold resource(FTP / memory thread) for 1 hour by using Connect Mode u201CPermanentlyu201D. Most of the cases SAP recommended this option.
    Regards,
    Raghu_Vamsee
    Edited by: Raghu Vamsee on Jan 14, 2011 11:24 AM

  • Time machine file transfer very slow during OSX 10.7 re-install

    I am using a macbook pro, and was running 10.7. (not sure exact version, and cannot look now, but should have been up to date)  I tried the free upgrade to Mavericks, but it failed and said I had a disk error.  At this point I could not boot back to 10.7 so I booted with apple-R.  I tried to do a repair from disk utility but that failed so I erased my hard drive.  Then I proceeded with an install of 10.7, which proceeded fine.  I got  to a point where it asked about transferring files, (forget the exact wording) and I said to use my time machine backup (from right before I tried the upgrade - backup was 80GB) and I started that.  It has been 16 hours and it still has not finished.  The external hard drive (Lacie)  clicks / whirs, and I see signs of very slow progress... (seems to be at about 80% now judging by the progress bar) but it can go hours without any noticeable change.  The "time remaining" information is variable -- going up and down -- and is clearly not correct-- has said 1.5 to 2.5 hours for the last 12 hours 
    Any ideas?  should I just wait a few more days     should I abort and restart the file transfer (if so, what is the best way to do this?)
    I cannot provide details on the computer since it is still busily restoring (I hope), but it is roughly 3-4 years old, lots of free space on hard drive (>100GB),

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for