Automatic goods issue of components upon creation of Production Order

Hello gurus.
The business would like to have the components in a Production Order automatically issued (with Movement Type 261) upon the creation of a Production Order.
I was investigating this possibility under the Production Scheduling Profile option in IMG, but there is no automatic action for this.
Do you know of another way this could be achieved? I'd like to do this preferably without having to implement User Exits or Batch Jobs.

Fernando,
Automatic goods issue is not possible.
But you can certainly think of backflushing the components while confirming the order with CO15 or CO11N.
Make the required settings in material master, work center or routing. It will get copied to the order.
The same can be maintained in the order too.
There is one more option available in 'Define confirmation parameters' T code OPK4.
Execute the above T code.
In 'Generally valid settings', mark 'All components' under 'Goods moveemnt'.
Also in 'General individual entry' under 'Error handlings/ logs' mark ''Goods movement' & if required mark 'Termination for incorrect goods movement' so that if any problem arises with the GI/ GR, the termination would be terminated.
Hope this helps you.
SmanS

Similar Messages

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Goods issue document is not displaying in production order

Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.

Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar

Automatic Goods Issue for Goods Receipt (Purchase Order).

Hi,
Experts - I have some newbee problem.
I have to create ZMIGO to behave like follows:
1. User enters all necessary data (like in MIGO) and posts document.
2. System creates automatic Goods Issue document based on data entered in 1. (above).
I doubt full automatic posting of GI will be possible (user has to fill in WBS for GI and possibly change "GI for project"). So my idea is to redirect user from ZMIGO (after posting) GR document to MIGO_GI and pass all necessary parameters. And thats my question: How to do it? Is it possible? Any other ideas? Maybe examples???
Will reward points to all helpful answers.
Regs,
FS

Hi,
I've created implementation for MB_DOCUMENT_BADI in se19 (named it: ZMB_DOCUMENT_BADI_1). Filled methods with code and put some break-points. Activiated methods and implementation.
When I post documents via MIGO this BADI is not executed! Why? When I've searched program SAPLMIGO for cl_exithandler only two were found: MB_MIGO_BADI and MB_MIGO_ITEM_BADI. What I have to do to activate this MB_DOCUMENT_BADI???
Points waiting for helpful answers.
REgs,
FS

Automatic Goods Issue in Outbound delivery scenario with resp to Shipment

Hi,
Could you please explain me, how Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
Is there any transaction for this?
Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
How we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
Could you please explain me in detail?
Thanks A lot.

Hi Anil,
VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
Thanks,
Sree.Manam

Automatic Goods Issue in Outbound delivery scenario with Shipment

Hi,
Could you please explain me how to Automatic Goods Issue happens in Outbound delivery scenario and in shipment process.
Is there any transaction for this?
Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
How schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
Could you please explain me in detail?
Thanks A lot.

Hi Anil,
VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
Thanks,
Sree.Manam

Automatic goods issue for outbound delivery without picking/packing

Hi,
I have the following flow: sales order -> outbound delivery -> goods issue.
I would like to to be able to post an automatic goods issue on my delivery.
Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
Thanks,

Hi,
Use t-code VL23
select varient SAP & STANDARD >>> Click on START IMMEDIATELY
or else
click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
it means sytem will run this program after every one minute
Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
Kapil

Automatic Goods Issue

Hi,
I am working with point-of-sale scenario. when I am trying to work with sales order ,my requirement is automatic delivery and automatic goods issue and automatic billing. for this I have configured immediate delivery , but wanted to know any user exit or enhancement for automatic Goods issue and immediate billing.? throw some light on this issue as I can go further from where I am.
Thanks.
Kanna.

Hi Chandrasekhar,
Thats right. But I am working on standard SAP , and I just want to get through with that scenario. As u said , there is no need for Goods Issue when we are working with Order related billing , since the customer picks the goods by himself in super-market sale. But In this case, it is different as we have to do picking by the cashier (just as a regular purpose) , If its like this ...how to approach ? should we go for user exit (if yes , which exit I have to take?) ? or any other way , suggest me.
Thanks,
Kanna.

Automatic Goods Issue after Outbound delivery and shipment.

Hi,
I am working on LES part.
Could you please explain me how to do Automatic post goods issue for shipments.
(in our scenario where after outbound delivery, picking, packing shipment takes place.)
Can we use VL23 for automatic goods issue for shipments? (or igoods issue is only for outbound deliveries?)
If so what is the selection criteria for background scheduling-Variants?
Please explain me in detail
Thanks a lot.

Anil,
Not sure if I understand your question, Goods Issue is posted for the delivery and not the shipment. In a shipment you can update the actual values for Planned, Check-In, Load Start, Load End etc values. A shipment can have single/multiple deliveries, you can use VL23 for scheduling a background job to do the PGI automatically, use either the standard variants or define your own variant and use that variant to schedule the job.
hith
Sunil Achyut

IDOC for Creation of Production order and also adding components

Hi ,
I have a requirement like I get the data from a 3rd party system and using that i have to create production orders and also should be able to add more materials in COMPONENTS part of that Production order. I was looking for a BAPI which can handle this process.
And also can any one help me by letting me know is there any Message type available for handling this process of Production order creation and Adding extyra components to it.
I have a message type LOIPRO (for Production Order) and associated function modle CLOI_MASTERIDOC_CREATE_LOIPRO for creation of master IDoc, but not sure can i handle the Components part in this.
Please do send replies ASAP, its very urgent.
Or else atleast suggest me the other ways of doing this .
Also send me any BDC program if anyone has already developed for this.
Thanks
Kumar
Edited by: Phani Kumar Peddagopu on Mar 19, 2008 6:56 PM

Resolved .

Automatic Creation of Production order per month

Hello Gurus,
Good Day! Is it possible to schedule creation of production order in background for certain material per month basis?
Thank you,
raymond

Hi Raymond,
If the suggestion of REM does not work for your requirement, then take the help of your ABAPer use one of the below BAPI's & create a Z prog. for creation of order as required.
1. Prdn order frm plnd order -> BAPI_PRODORD_CREATE_FROM_PLORD
2. Prdn order -> BAPI_PRODORD_CREATE
3. Prdn oder with ref -> BAPI_PRODORD_CREATE_FROM_REF
Alternatively, create one order & keep it open for the entire year, just do monthly wip calc & at the end of financial year settle the order completely.
If helpful award points
Regards,
Vivek

Automatic creation of production orders via planned orders

Hello experts!
is there a way via customizing to trigger an automatic creation of production order from a planned order when the planned order finished date is within the next week?
thanks

David,
Not in customizing.
Most people create a job step after the RMMRP000 program step in their MRP job, using program PPBICO40. Dynamic date range is available as a selection criteria against the opening date, which is the standard criteria for selecting and converting planned orders (not finish date).
Best Regards,
DB49

No goods issue can be posted for Stock Trasnport Order

Hi,
I am in MB1B transaction, 35 movmt type (BP01 plant) and want to psot the stock to stock in transit to another plant (BP02). STO was created in BP02 plant and Order DS was in BP01 plant.
Now, i am getting error that no goods issue can be posted for Stock Transport Order.

Hi,
It is not creating a delivery thru VL10b. What u meant was create delivery and then do PGI. It will put that stock in transit.Isn't it?? But that is not happening.
Also, MIGO doesn't have movement type 351 E.
Please provide further queries.
Regards,
Thomas

Reg:Bapi for mass creation of production order/confirmation

Dear Experts,
I wanted to know with the following BAPI is it possible to create Multiple production orders for different semifinshed Materials along with material availability check and other functions similar to CO01 transaction.
I knew there are standard transactions for mass confirmation for production orders. But i need a confirmation on this BAPI . As i am planning to go-ahed with ,mass creation of production order creation / Order confirmation in single custom transaction.Need back flush activity even supported.
BAPI_PRODORD_CREATE to create the orders.
BAPI_PRODORD_RELEASE to release the orders.
BAPI_PRODORDCONF_GET_TT_PROP to get the default data for the confirmation.
BAPI_PRODORDCONF_CREATE_TT to ost the confirmation of production order.
Along with this BAPI do i need to commit any other BAPI to carry out back flush for components.
Need your suggestions to take it further.
Regards,
Daya.

Dear SAP Daya
If the issue has been solved, please close this thread.
You have already mentioned that the issue has been resolved, thefore, you should not ask for help on another thread before closing this one, as it looks like you are trying to force people to answer your threads.
Users are always trying to answer as many threads as possible on good will we don't need this kind of "incentive".
Please read carefully the The SCN Rules of Engagement, especially point 8:
Be responsive. If an SCN member has answered your question, please mark the answer as "helpful” or “correct”. Mark the discussion as “answered,” so that other members can find the answers more easily
Also, I checked your old threads and I could observe that there is only one closed. Please review your old threads and close those already solved.
BR
Caetano

Header Material Repeated during creation of production order

Sir,
I have defined bom as one component and 3 co product.
During creation of production order in operation overview i found header material is repeated in components.
Pl. suggest me where i have made mistake.
Regards,
Vivek

Hi
Check whether BOM is recursive or not? also check the movement type against the header material.
Also check in CO03>Goto> Material list
Regards
Anupam Sharma
Edited by: anupam sharma on Jan 30, 2012 12:17 PM

Automatic goods issue of components upon creation of Production Order

Similar Messages

Maybe you are looking for