Automatic GR does work for inbound ASN

Hello,
I hope someone can help me with this.
I ran into a problem while testing the automatic GR for inbound deliveries. I using confirmation control key 0004...have it set to create inbound delivery and auto create the GR. Now, if I use VL31N to create a delivery the delivery is created and the GR is posted when I save. However, for an inbound asn only the delivery gets created. I have to use VL32N to post goods receipt. Any ideas?
Thank you
Jeff

I was just trying to test if the GR would be completed automatically for a delivery. I want to see if we can have automatic GRs from inbound ASNs where the POs use confirmation control key 0004.
Thanks
Jeff

Similar Messages

If i want to make money with this program and my knowledge of it what would be the best way to start doing work for others

I have been doing lots of work on final cut and want to know how some of you maybe starded doing work for others to make $

.. just to add my 5¢:
There're several ways to moneytize your editing skills.
● freelance editor:
Indeed, then first question of any client is "What apps do you handle?" I dare to say, depending in what area you live, those huge fabs searching for freelancers use very little FCPX; here, they're looking for Avid, GVproducts, maybe FC/pro...
● one-man-slaughter-houses aka Wedding-photographer
If your skills are beyond editing-only, and you're an (excellent) DoP, for sure offering your 'products' is the obvious; Weddings, Bar Mizwahs, Funerals, Services, lectures, workshops, company image movies, demoes, exhibit videos... But, as other mentioned: nobody is intersted with what tools you create the film; only results count; in private products, lots of 'eye-candy' gives a happy bunny customer
● 'Yellow Pages': I'll make you a movie...
I'm not doing that professional, but occasionally for money: people ask me, to grab a harddrive full of 'files' to create 'a nice movie', lately two 'flat' birthdays (30/40), tons of pics, shakey iPhone messages, music, dissolves, done. - nothing for living...
● Teaching?
teach other your skills, have a look here http://training.apple.com/act
Hurdle to go for all those: hen-egg-dillema
People want to see your skills in advance; but without jobs, nothing to see yet.

Iphone/ipad/ipod charger wire wont work for iphone or ipod but does work for ipad very strange

guys this is so odd and pointless but for some reason my charger wont let my iphone charge or ipod but it works for iphone. iphone running ios 7 same with ipad. any solutions?

Hello there, Kareem77.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
If the issue persists, the first article also refers to this:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How automatic dirty checking works for persistance layer?

Hi,
I recently started learning about Java Persistance API and also about Hibernate and I came across this example
private void addPersonToEvent(Long personId, Long eventId) {
    Session session = HibernateUtil.getSessionFactory().getCurrentSession();
    session.beginTransaction();
    Person aPerson = (Person) session.load(Person.class, personId);
    Event anEvent = (Event) session.load(Event.class, eventId);
    aPerson.getEvents().add(anEvent);
    session.getTransaction().commit();
}and in the explanation they have given like
After loading a Person and an Event, simply modify the collection using the normal collection methods. As you can see, there is no explicit call to update() or save(), Hibernate automatically detects that the collection has been modified and needs to be updated. This is called automatic dirty checking, and you can also try it by modifying the name or the date property of any of your objects.
How does it work? I know that something called dynamic proxy that exist in java, is it by that?
Let us say I want something to do like an interceptor, whenever I call a particular method on an object, that call will first be address by me and then it will be delegated to the actual object.
Say
public void handleEvent(SyncCompletedEvent event)
        // We have to handle this one, this is the only one that will trigger the start up sync
        // however, this request doesn't need response!
        if (event.isSenderDeviceCommunicator())
            // set the request to null, so that no intermediate response will be sent out.
            handleRequest((UpmSyncRequest) null);
        if(event.getSubType().equals(SyncCompletedEvent.SUBTYPE.LEGACY_SERVER_STARTUP_COMPLETED))
            ((UpmService) getService()).scheduleAuditBackup(false);
    }

What kind of problems do you have with the Firefox 28 release?
Did you check your security software (firewall, anti-virus) to make sure that the new version in allowed?
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
You can create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Email notification for Inbound ASN

Hi All,
We have a requirement once Supplier confirms the PO , Ware house team should get email notification with below mentioned details.
when an order will be shipped,
which items are being shipped,
how many of each item is being shipped
physical characteristics about the shipment such as the shipment’s weight,
the number of boxes and a description of how the shipment units are packaged.
which mode of transportation is being used for shipping and
carrier information.
Please help me with step by step configuration for ASN inbound email notification.
Regards,
Gowri

Hi Robyn,
We have implemented MM-SUS,
Once PO is created in ECC the same will be reflected in SUS portal, Supplier will confirm the PO with available stock Qty which generates inbound delivery in ECC.
Requirement is warehouse team should be notified when supplier confirms the PO i.e. when inbound delivery is created.
Please guide me,
@Jürgen L
I couldn't understand your concern.

Command-period to cancel EXS sample loading: Does this work for anyone?

Hello everyone,
When loading a sample instrument into the EXS, watching with glee as that wonderful progress bar slowly fills up; underneath there is this note: Press "command-period" to cancel. No matter what I do nor how hard I try, I cannot get this key command to work. When I first noticed this problem long ago, I searched both manuals and found nothing, and with a great sadness in my heart, I defined it as a "no longer supported feature" in logic and moved on.
Today, after experiencing the relentless loading of unnecessary samples (see my other post) my thoughts wandered yet again to how wonderful life would be if this feature actually worked!
So I'm asking, has ANYONE been able to get this to work? If not, anyone know of a work around to cancel the loading of samples?
I anxiously await your replies, and thank you for your help.

Jonathan,
It's never worked for me either. Sorry I don't have a work around (other than unplugging the computer), but did want to confirm that indeed it doesn't work.
It does work for the bounce progress bar though.... Not that that helps, but is worth mentioning.

I am happy with the CC format- it works for me

There are a million and one negative threads about the new CC stuff. But I wanted to start a thread with a different tone.
I realize that the majority of those in the forum probably see the CC change as a negative one. And in complete honesty, I understand their reasons, and even AGREE with them. The lack of an exit strategy from the cloud is a problem, though Adobe does say they are working on a solution. The place I work has no plans on upgrading to CC, though it's only maybe 10 users that are affected.
But on a personal level, the CC option is a huge blessing to me. Though I do work in an environment where software is provided for me(we're currently on CS 5.5), with a new baby on the way and daycare costs taking up half my salary, I am ramping up my freelance business again as sometime in the next year, I'll probably become a stay at home dad.
I've never been able to afford the Adobe suites outright. My wife and I do have a certain amount of personal money set aside each month to spend, but it's very difficult to come up with enough to purchase the suites.
So when I saw that I could get everything for $30 a month for the first year(I do have a CS3 or above product registered), I was very happy. As somebody trying to get my freelance business running full speed again, this is a perfect opportunity for me to get into the Adobe software outside of my place of employment. And if things go well, the $50 a month after that won't be a problem. If I'm not making enough to afford $50 a month, then I'm probably not running the best business and probably won't be needing the tools for long.
So this arrangement works perfectly for me. I do web design AND video/motion graphics editing, so having everything at my disposal is ideal.
So in the sea of negativity that exists here in the forums(and not for bad reasons), I just wanted to say that I'm happy with this. Adobe have provided a way for me, who doesn't have a ton of money flowing in, to get into the great tools I already know and love. And in my view, at least temporarily, if I'm finding success, the continued fee is more than justifiable. So I want to say thank you to Adobe for providing this opportunity.
Now, if I can please ask that this thread doesn't turn into yet another one of the already extensive number of threads bashing CC, and hopefully others who are thankful for this plan can chime in. Maybe nobody will, but I'm sure there are others out there. I just don't want this to degenerate into the same thing you can read in every other topic. Yes, I know that when I want to get off "the cloud", there are things to consider. I'm aware, and I accept that. Let's leave it at that.
Thanks!
Brent

Biggles Lamb wrote:
Chill out guys, getting personal will never ever change another persons view, right or wrong, they are entitled to them .
The pros and cons of to CC or not to CC have been done to death
Its a fact the CC model will work for some, especially newbies and small businesses.
The risks associated with the CC model have been well documented.
For long term users of CS perpetuals its generally a large hike up in cost compared to the upgrade system.
Then there are the....... Adobe can rot it hell...... group who will never subscribe
To each their own, you do the math to suit your cashflow whatever that is and then make an informed decision
To those on the CC model, I'd like to offer some practical advice.........do not allow automatic updates.........make regular backups............develop an exit strategy of alternatives for when you can no longer afford the subscription costs............never ever assume that the Adobe update is bug free
Enjoy your cloud
Col
Thank you for that post, and the advice. I just happen to be one of those who it does work for. I've been around long enough to know that CC isn't going to work for everyone(the large publishing/radio/web company I work for isn't upgrading to CC because of the costs involved). But it does for me as I potentially venture out into the full-time freelancing world and away from the more structured big office environment. I can't make decisions based on what is best for anyone else, or what will hurt or help Adobe. Just what affects me, and that's all.
Brent

HT201272 I have recently picked up an Apple TV. When I go to the movies tab, there are less movies available there than there are in my i-Tunes account. I've done some looking around at questions from others, but haven't found an answer that works for me.

I have recently picked up an Apple TV. When I go to the movies tab, there less movies available there than what is available in my i-Tunes library. I have 38 movies showing in my library but only 23 are showing in the Movies tab on the Apple TV. After researching this a little, there are only 23 movies showing under Purchased in the Quicklinks of my i-Tunes account. The majority of my collection are digital copy downloads that came from DVD purchases. Some of the missing movies were added in the past couple of months, the rest are a year-or-so old. I have done some looking around at questions from others, but I have not found an answer that will fix my situation. How do I update my library to get ALL of my movies to reflect that they were "Purchased"(as it says they were in their Properties)?

Biggles Lamb wrote:
Chill out guys, getting personal will never ever change another persons view, right or wrong, they are entitled to them .
The pros and cons of to CC or not to CC have been done to death
Its a fact the CC model will work for some, especially newbies and small businesses.
The risks associated with the CC model have been well documented.
For long term users of CS perpetuals its generally a large hike up in cost compared to the upgrade system.
Then there are the....... Adobe can rot it hell...... group who will never subscribe
To each their own, you do the math to suit your cashflow whatever that is and then make an informed decision
To those on the CC model, I'd like to offer some practical advice.........do not allow automatic updates.........make regular backups............develop an exit strategy of alternatives for when you can no longer afford the subscription costs............never ever assume that the Adobe update is bug free
Enjoy your cloud
Col
Thank you for that post, and the advice. I just happen to be one of those who it does work for. I've been around long enough to know that CC isn't going to work for everyone(the large publishing/radio/web company I work for isn't upgrading to CC because of the costs involved). But it does for me as I potentially venture out into the full-time freelancing world and away from the more structured big office environment. I can't make decisions based on what is best for anyone else, or what will hurt or help Adobe. Just what affects me, and that's all.
Brent

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Firefox no longer works for many Banks

The whole point of Firefox was that it was customizable.
Now it doesn't work. It doesn't even work on your own pages.
I may as well use AppleSafari or switch to Chrome or Opera.
I hate having to waste my time customizing Chrome, but will seriously consider doing it.
I don't have time to try to get Firefox to work on Bank of America and Citibank. It does work for my Wells Fargo account.
Google Search also works: https://www.google.com/search?q=Firefox+30+has+become+unusable.&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=fflb
and there are a score of hits.
I echo http://forums.mozillazine.org/viewtopic.php?t=184258 that FF eats up %CPU
I am sure that one of my favorite add-ons is the problem or that it is one of the security and privacy items that I use. When I was younger I had time and energy to step thru all the add-ons one by one and see which one did not for; now I don't. NightlyTester (add-on) used to provide me with a list of add-ons. Now it doesn't or doesn't under the current regime of Firefox, so, again, a laborious process of listing.
One other issue relating to upgrades and old add-ons. I used to have a long horizontal list of favorite bookmarks, possibly abbreviated to favicons, With the tabs below that were currently open, and the name of the browser on top (because of multiple gmail or facebook accts, I use several browsers.) What focus group did you use to put me back in the unfamiliar territory of the sharp edge of a learning curve? (Yes, ofc, I used Classic Theme Restorer to put things right.)

Hi DoesFirefoxRespond,
Thank you for your questions. I understand that there is an issue with accessing some bank sites. If you have already disabled Firefox add ons and have still experienced the same issue, please try the following:
# Open a Private Window and login to the bank site to see if it causes the same issue. It will not use active logins or previous history.
# [[How to clear the Firefox cache]]
Please post back with your results, we are happy to help.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

IDOC for inbound delivery

Hi Gurus,
Pls help me to understand this functionality:
Shipments destined for a Distribution Center will generate ASNu2019s(advance shipping notification) to alert the Distribution Center to the upcoming receipt.
There are two variations of the transaction that will initiate the ASN:
u2022 Receipt of an ASN from a vendor to a Distribution Center will result in the creation of an Inbound Delivery. That Inbound Delivery must be sent to WM via IDOC.
u2022 Shipments from Distribution Center to DC will create an Outbound Delivery from the u201CClose Loadu201D process in Warehouse M. Creation of the Outbound Delivery to another DC is the trigger for the IDOC to WM.
The IDOC to be used could be a variation of the DELVRY03.
My doubts includes:
1. can I use one idoc for both the scenarios?
2. both are outbound idocs or not?
3. Any suggestions how to do this?
Thanks..
SD

>
Shibu David wrote:
> My doubts includes:
> 1. can I use one idoc for both the scenarios?
Yes you can use IDOC DELVRY03 for both scenarios
>
Shibu David wrote:
> 2. both are outbound idocs or not?
No.
ASN sent to DC will be outbound message.
ASN received by DC, which creates Inbound delivery is inbound message.
>
Shibu David wrote:
> 3. Any suggestions how to do this?
As far as I know message type used in SAP for ASN is DESADV.
For inbound ASN use process code DELS and for outbound use DELV

Add artwork works for music, but not for TV or Movies

I am unable to add artwork to movies or TV shows, although it does work for music. Whenever I try to add it to a movie, I go "Get info"->"Artwork"->Select the file and it shows up in the preview window. However, when I press "OK", I get an odd "movie reel" type icon where the image is (picture attached above, sorry about poor quality), which after a few seconds reverts to the original artwork (not the artwork I'm trying to change it to). Anyone know what could be going on here? I've only noticed it since the recent iTunes update. Thanks

on demand movie as in you buying or renting a movie from itunes?

Database link works for OS user "oracle" but not for other clients

My DBA connects as user1 to db1 and successfully queries over database link db2.
[oracle@linux19 ODA]$ sqlplus user1/****@db1
SQL*Plus: Release 11.2.0.3.0 Production on Fri Apr 12 07:39:49 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT * FROM DUAL@db2;
D
XI log in from a Windows XP client and test the same database link with a ORA-12154 result.
C:\>sqlplus user1/****@db1
SQL*Plus: Release 11.2.0.1.0 Production on Fri Apr 12 11:18:18 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> SELECT * FROM DUAL@db2;
SELECT * FROM [email protected]
ERROR at line 1:
ORA-12154: TNS:could not resolve the connect identifier specifiedI can create and successfully use database links by including the full TNS entry in the USING string.
What are some possible causes for the different results?
What additional information might I supply to help troubleshoot?
Thanks very much.
- Doug
Edited by: enquad on Apr 12, 2013 2:56 PM
changed "database link db1" to "database link db2" per comments by SB
Edited by: enquad on Apr 12, 2013 3:00 PM
Changed "user" to "OS user" in subject for clarity

enquad wrote:
Sorry gentlemen and SB, but my question is still not answered. It is a new question, which I have not found answered elsewhere.
To summarize:
SB97025 informs me that db1 is not a database link, but I never said that it was. It is the second database (anonymized as "db2") that is connected to through the database link "db2.mycompany.net".
SB97025 also wonders intriguingly if my DBA and I are we really connecting to the same database when we each connect to user1 on db1. Perhaps the Oracle server and my PC have TNSNAMES.ORA files that lead us to different databases for the same TNS alias? I do not believe this is the case, because my DBA created that user1 and that database link in the db1 database specifically for the purpose of doing this test and I see that same link when I connect to user1 on db1. Unless my DBA is spoofing me by creating user1 in two different databases - only one of which contains a working dblink named db2.mycompany.net - just for the purpose of throwing me off, I would have to conclude that he and I are actually connecting to the same database.There is no reason to "believe" (or not) that "this is the case". The entire point of SB's comment on that was to get you to verify. President Reagan famously said "trust but verify". He never worked as a DBA. I say "don't trust, just verify".
Obviously something is different. And at this point the most likely and easiest to confirm is that you and your DBA really are connecting to the same database, on the same host server, using the same link. And at this point all we really have is to trust your DBAs statement.
>
Ed Stevens reminds me that db1 is acting as a client to db2 and so the solutions to the ORA-12154 are the same as for any client connection as listed on his blog (which I had already read), none of which solve my problem. Rembember, the DBA can use the database link, so by whatever means the TNS lookup is happening when he uses it, the correct connection description is being found. The question is not "why does this stinkin' database link not work"? It does work for the DBA.
Pierre wants to make sure I know that it is the Oracle server's TNSNAMES file that is the important thing, not my client's TNSNAMES file, which is true but not relevant to my problem and I was never so naive. He also says that I could try creating a database link by including the full TNS entry in the USING string, which does work as I had already mentioned in my original post.
Amar asks if my DBA can: sqlplus username/password@db2.
The answer is yes. The dba can use SQL*Plus to connect to db2 from the server hosting db1 and can connect to db1 from the server hosting db2. There is almost nothing my DBA cannot do.
None of the posters addressed the key information in my post, which was the different result my DBA and I get when using the same database link in the same schema on the same database. That AND the fact that my DBA is logged on to Linux Oracle serve as user "oracle" and I am logged in to my PC. Why should it matter to a database link which computer is running SQL*Plus or who the OS user is?
Also the GLOBAL_NAMES parameter is set to FALSE.
- Doug

No item could be determined for Inbound for TO message No.L3898

Hi folks!!
While doing TO for inbound, I am getting following error No items to be placed in storage could be determined.
While if I tried to create TO with reference to GR, system is allowing me to create TO.
Please let me know what are the settings required to create TO for Inbound delivery.
Best regards

Hi,
LT03 is used to create TO WRT outbound delivery and even the path for that is under Outbound delivery
Logistics -->Logistics Execution -->Outbound Process -->Goods Issue for Outbound Delivery -->Picking -->Create Transfer Order -->LT03 - Single Document
LT0F is used to create TO WRT inbound delivery.
Once the Inbound delivery is created, then check whether a material document is created. I.e in Status overview Total Goods movement status should be C. if this is A then in document flow you can see that the inbound delivey is open.
Execute Goods Receipt for the inbound delivery and then execute LT0f.
This should solve your problem

Automatic GR does work for inbound ASN

Similar Messages

Maybe you are looking for