Automatic GR during shipping notification (inbound)?

Hi,
Is it possible to setup automatic GR after a receipt of a shipping notification?
I know it is not common, but in our make-to-order company this is not strange.
Any suggestions? Preferable within standard SAP.
Thank you,
Eric.

Not possible with Std SAP.

Similar Messages

  • Advance Shipping Notification (Inbound delivery ) against stock transfer pu

    Is it posible to create Advance Shipping Notification (Inbound delivery ) against stock transfer purchase order?
    Pl confirm. and give me document.
    Regards,
    Sanjay

    Hi,
    i don't think ur requirment can be mapped in STD SAP &
    more over this query should be rasied in either SD or MM forum
    best of luck
    Regards
    kumar

  • Automatic GR by Third Party delivery throug shipping notification?

    Hi,
    What is the best scenario if the third party vendor sends goods directly to the end customer? The vendor can send me a shipping notification. Can I post automatically (only for third party and direct delivery to end customer) a GR when I receive an shipping notification?
    Points awarded,
    Greetings,
    Eric van Zundert.

    We have a similar requirement that I am designing a solution for.
    Here is what I am doing-
    Sales Order is created with item category TAS.
    The item category I get in the PReq is Third Party
    The account Assignment category will drive whether you can process GR or not.
    (you may change or create new account assignment category in spro>materials management>purchasing>Account assignment>Maintain Account Assignment Categories) If you want Goods Receipt to be processed, account assignment category C could also work). Which one you would like to use can be decided and then assigned to Schedule Line category for third party you use. This assignment is done in SD config in schedule line category.
    About your other concern on how do you know about readiness of delivery @ vendor for you to pickup and deliver to customer -
    Use confirmation control key in the purchasing. Use the one that allows you create a shipping notification (Inbound Delivery). If you want, use EDI from vendor so that when vendor informs you via inbound delivery, your system tracks the readiness of the delivery at vendor's premises. You may complete GR(now it becomes optional because your very purpose of processing GR is addressed by shipping notification). In 3rd party processing, Delivery Note is not required for the Sales Order because you physically won't deliver to customer.
    Hope this helps! Reward points if you find this useful

  • ASN (Advance shipping notification)and Inbound deliveries

    Gurus,
    In our secenario we want to use the functionality of Advance shipping notifications from our vendors through EDI/IDOC, where exactly in the PO screen does the notification number resides and how does this trigger inbound delivery, meaning whether we should still be using VL31n/VL34? Any help is greatly appreciated.

    Hi
    The ASN from vendor in form of EDI will be converted into IDoc in SAP and it should trigger VL31N and pass the data.Once Inbound delivery created thru IDoc same will be updated in PO line item details-> Confirmation tab.
    You should develop an interface(Program) to convert EDI file from vendor
    (normally XML file will converted into IDoc) into Inbound delivery.
    regards
    Ramakrishna

  • Inbound shipping notification Idoc

    Can any one tell me what will be the impact/difference functionally if i use the function module
    Idoc_input_delvry instead of Idoc_input_desadv1 for inbound shipping notification with message type DESADV/DELVRY01..?
    Thanks,
    Larry

    Hi
    DESADV is the message type. Idocs are attched to the Message type
    you can search or list down the idoc types in Transaction WE30.
    If you want to the idoc types attached to message type DESADV you can find in WE57
    The idoc types attached to DESADV are
    DELVRY01 - Function module - IDOC_INPUT_DESADV1
    DELVRY02 -Function module - IDOC_INPUT_DESADV1
    DELVRY03 -  Function module - IDOC_INPUT_DESADV1
    Thanks & Regards
    Kishore
    Edited by: Kishore Kumar Chiluka on Apr 23, 2008 1:25 PM

  • Inbound delivery and shipping notification

    Hi,
    what is the difference between shipping notification and inbound delivery in confirmations tab of POs?
    Regards

    Hello SAP Friend,,,
    IT is nothing but the ASN from Vendor maintained in PO ,
    Inbound delivery is done by using VL31n Transaction after receving an update from Vendor about the shipping details of material,Quantity,date etc.
    You can specify the deadline for receipt of confirmations for each confirmation category in Customizing for Purchasing (Confirmations, Set up confirmation control under Confirmation sequence.)
    You can specify in Customizing that you wish to see the following in the monitoring list, for example:
    - Which order acknowledgments have still not been received a certain number of days after the PO date
    - Which shipping notifications have still not been received a certain number of days before the delivery date
    Arshad
    Edited by: arshad ahmed on Apr 28, 2009 12:09 PM

  • Update Country of Origin in Inbound Delivery(SHipping Notification)

    Hi All:
    I am using GN_DELIVERY_CREATE function module to create inbound shipping notification, in that i am updated the coo in SPE_HERKL field of the internal table XKOMDLGN for each item. This CoO is update in each item of the inbound shipping notification foreigh trade data of the Coury of origin.
    But, the CoO is not update from the internal table XKOMDLGN field SPE_HERKL to CoO in foreign trade data of each item in Inbound shipping notification.
    Please throw some light on it.
    Thanks,
    Venkat

    Hi Lakshmipathi,
    So far we are encountering 2 incorrect deliveries in production. This does not involve Sales order but Purchase Order. I tried to check the country of the Supplying Plant and the country is not the country reflected in the delivery. It is expected that the country of the supplying plant must reflect in the delivery. Checking the PO, it is not also getting the correct country but it is getting the country of the receiving plant. We got confused why it is getting the country of the receiving plant.
    Thanks,
    Rish

  • Receiving point in Shipping notification

    Hi all,
    I would like to make the Receiving Point (LIKP-VSTEL) changeable in the Shipping notification, is that possible?
    Thank you very much,
    Annabelle

    Hello, we have been able to solve this issue.
    The problem was that when we created an inbound delivery from an NB purchase order, the receiving point was not automatically determined in the header Shipment view. And the field was not changeable. So users were not able to cancel a goods movement via VL09: "GI for delivery & cannot be canceled for the following reasons: You are not authorized to cancel the goods issue for shipping point &".
    The reason is that in inbound delivery, as per the standard functionality the receiving point is grayed out. In order to open the field the standard program needs to be modified.
    If you want your system to determine the receiving point automatically: IMG > LE > Shipping > Basic Function > Shipping Point and Goods Receiving Point Determination > Assign Goods Receiving Point for Inbound Deliveries.
    Then the receiving point will be determined automatically when you complete the storage location in the purchase order.
    Regards, Annabelle

  • Automatic entry during VL31N

    Hi experts
    There is requirement of automatic accounting entry at the time of creation of Inbound delivery (VL31N)  as below-
    Goods-in-transit - Dr
    Inward Shipment Clearing - Cr
    At present accounts department is posting this entry manually after creation of inbound delivery. Its contra accounting entry is being posted automatically at the time of GR as below-
    Inward Shipment Clearing - Dr
    Goods-in-transit - Cr
    Please suggest how the highlighted entry can be configured for automatic posting at the time of VL31N document posting and same should be reversed if Inbound delivery is deleted.
    thanks

    Hi,
    No, its not a subcon scenario. The requirement is as under.
    In case of Import procurement, when we receive the intimation of material shipment from overseas vendor, finance department is posting a finance JV (to the value of material in transit) as below:
    Goods-in-transit  - Dr
    Inward Shipment clearing - Cr    (this is actually a virtual liability)
    So, the requirement instead of posting a manual JV, system should automatically post the above entry in background  if an Inbound delivery (VL31N) is created for the quantity shipped by the supplier.
    Its contra entry (reverse entry) is automatically being posted during GR against inbound delivery (based on the pricing procedure) as under:
    Inward Shipment Clearing - Dr
    Goods-in-transit - Cr
    hope, the requirement is clear.
    thanks

  • Creation of a shipping notification for a PO in EBP from a XML file via XI.

    Hi everybody.
    We are trying to create a shipping notification for a Purchase Order in Enterprise Buyer from a XML file via XI.
    For to do it, we are using ‘DespatchedDeliveryNotification_In’ message interface (transaction SPROXY).
    But when we execute it, the system show us next message:
    "An error occured within an XI interface: An exception with the type CX_GDT_CONVERSION occurred, but was neither handled locally, nor declared in a RAISING clause Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F5B; Line: 4"
    No more information is available.
    Is there any additional transaction to see more information about the error message?
    Is there any documentation about this XML file, mandatory fields, examples…?
    We populated some fields in our XML file, but we do not know if the problem is with mandatory fields, data, program error…
    I will thank for any information
    Thanks in advance.
    Raúl Moncada.

    Raúl,
    This is because of the inbound UOM.
    The include LBBP_BD_MAPPING_SAPXML1F5B is in charge of mapping the item Unit Of Mesure (UOM) sent in the ASN XML file (it should be an ISO code).
    You can test FM UNIT_OF_MEASURE_ISO_TO_SAP with this inbound ISO code.
    PS: you should create an OSS message so the mapping sends back an error message instead of generating an uncatched exception (that generates a dump).
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • Open shipping notification in md04

    Dear Experts,
    Please suggest how we can handle the qty differences arising from the goods receipt or return delivery in case of using the goods receipt w.r.t inbound delivery in system.
    In MD04 the diffrential quantities are shown as open shipping notification, but our requirement is that the inbound delivery should have the status closed in case of partial GR or return delivery.
    In case of automotive goods receipt there is configuration for quantity difference profile, but for organization like us who are in manufacturing how to overcome the same.
    The main motto is that we do not want any open shipping notification in md04 how to achieve that.
    regards

    Hi
    There are no the standard ways to handle certain type of MRP elementt like the shipping notifications to be excluded unless you put them into a storage location excluded. (MRP indicator 1 in transaction MMSC).
    However, SAP delivered some BADIs to allow the customer write their own source code to control them, e.g. the BADI
    MD_CHANGE_MRP_DATA, it contains some methods below.
    CHANGE_MDPSX_MDBS     Change data when importing purchase order/ delivery sched.
    CHANGE_MDPSX_MDLA     Change data when importing shipping notification
    They are called in MRP/MD04 etc after reading the PO or shipping notifications then you can decide if they should be excluded or not by your own source code, please read the documentation of them in SE18 on how to implement.
    Leon
    Regards.

  • Shipping Notification with reference to a Purchase Order

    Hello all,
    I want to know how to create a Shipping notification referring to a import purchase order.
    regards
    Ashish

    Hi
    Follow as per blw
    Config:
    Go to SPRO-MM-purchasing-Confirmation-setup confirmation control
    here select the 10 and check the check box Create inb delivery
    then select the line and click on the confirmation seq and make GR relevant, MRP relevant and GR assign (all three box checked)
    Process Flow: -
    1. ME21N - In PO, Confirmation Tab, select the confirmation control key as "Shipping Notification" or "Inbound Delivery"
    2. VL31N - Create Inbound Delivery w.r.t. PO
    3. MIGO - Goods Receipt > Inbound Delivery
    If you donu2019t select the conformation control key in the PO than system wont allow you to create the Inbound delivery against the PO.

  • I need a bapi  for material management advance shipping notifications

    i need a bapi  for material management advance shipping notifications  for developing powls which includes below fields and some more fields.
    •     Inbound delivery number
    •     Due date (GR date)
    •     Vendor delivery number
    •     Material
    •     Name of material
    •     Quantity
    •     Vendor
    •     Name of vendor
    thanks and regards,
    jameer.p

    Hi Jameer,
    This is a hard one, my friend. I understand what you are trying to do.. Try BAPI_DELIVERYPROCESSING_EXEC. It is tricky though.
    Moreover you might want to use a FM to fill the IDOC data. something like IDOC_INPUT_**. this might be a better option.
    cheers,
    Hema.

  • Shipping notification and PO outstanding qty in ATP check

    Hi all,
    I have the following situation: intercompany purchase order process with confirmation control key (including outbound and inbound delivery). In my ATP check I have included purchase orders and shipping notifications. This has as consequence that after the outbound delivery is created and outstanding quantity remains open in the PO (due to the nature of our business), this will disappear when the PO is received. However, while this qty is open, it could be taken into account as available to promise and it can lead to unreal sales order confirmations.
    Does anyone know if there's a way to eliminate this outstanding qty without changing the PO qty and keeping PO's and shipping notifications in the ATP check.
    Thanks in advance.
    JC Garita

    Dear KANTH,
    Documents without order number in ATP  are always temporary quantity assignments (TQAs). If the order number was known at the time of running the ATP check, the TQA carries the order number, otherwise it carries e.g. <unknown>. The TQA carries order number <unknown> until either the item is converted or a new ATP check is executed.     
    Please also have a look at the note 488725 mainly points 4.,5. and 8.                                                                               
    You can delete the old assignements with the report /SAPAPO/om_delta_remove_older (via SE38).                              
    Alternatively you can delete the TQA's manually. Use transaction /SAPAPO/AC06., just delete the user and generation date and execute.                                                                               
    The system behaviour should be fine after the deletion of the hanging  TQA's.                                                                 
    Regards,
    Tibor

  • PO Confirmation Vs Shipping Notification

    Hi
    PO Confirmation Vs Shipping Notification  what are the basic differeces ?

    Confirmation will give the quantity adn delivery date information rahte shipping notification will geive the quantity, date as well as the inbound delivery you can create and you can also make GR agianst the Inbound delivery
    so suppose you have 1000 qty PO and you going to receive in partial and you want to post the GR/IR against the exact qty than use Shipping notification so you can create inbound delivery and receive against ID

Maybe you are looking for