Automatic Information / Notification About Patches on SWDC?

Hi there,
I'm planning to create "some kind of tool" (details are not to be published yet, for instance if this should be offered as a service or as software, etc pp) which sends notifications if there are new patches for a certain SAP component / SPS level / ... on SWDC ("Software Download Center" on service.sap.com).
As far as I know, there does not exist such a functiionality, not at service.sap.com nor in SolutionManager nor in ...
Have I overlooked something? Someone told me, there might be something similar on service.sap.com, but wasn't sure.
Any input?
Or - if there is no such "already exists"-input - would you like such a tool?
Best regards
Detlev

Hi Sunny,
> whenever SAP release some new notes or updates the note,
> it get reflected there in solution manager
Yeah, but what is missed from an operational point of view is: Whenever SAP releases patches (not: SPS - these dates are more or less well known), there is not automatically a note in the HotNews/Notes/... section published. That was what I checked on service.sap.com for exampel for the portal.
> as per real customer scenario's, customer would not go for SP upgrade very easily,
> so for them it does not matter if new patch is released
Please differentiate between patch and SPS. Patches (and their info description, which sometimes points to a note, sometimes holds the complete info about the corrections by itself) often point to possibly very problematic issues. These at least can be more than helpful (for customers to prevent production problems; for SAP to prevent customers running into the same and then calling SAP for support).
The idea for the tool was just from "real customer scenario's" - where people tend not to be informed about released patches, as this takes a hundred klicks (OK, maybe some less) on SWDC; and you would have to do this regulary. So, most people working in operations just don't do it, not once in a month, not once in a quarter. Most people working in operations stumble over patches just when they have run into an issue.
OK. I already have talked to some customers (and for some years, I'm working in operations, so that I know the problems in this area quite well). So far, it seems that I have not overlooked anything (I would have loved to...).
It will take some days / weeks until further steps are sorted out, and a first version might take it's time (I would expect January at the moment, but just like SAP - this might be subject to change without further notice
Still, if anyone likes to add additional input - where the shoe pinches for you, working in operations for example - that would be highly appreciated, or what concrete features you would like to see. I won't do everything on my internal list in the first step, but knowing what might get into it one day makes design decisions easier.
Best regards
Detlev

Similar Messages

  • Latest information required(about patches and kernael)

    Hi all,
             Our present SAP version is 4.7E ,Oracle is 9.2.0.7 and kernel is 6.40(patch level 121).basis patch level KB62060,Abap KA62060 .We do not have solution manager upto now.
    Please give your good suggestions
    1. what is required patch level to maintain ?
    2.what is end for supporting SAP 4.7E and oracle 9.2.0.7?
    3. what are your suggestions for future implementation?
    Regards
    Nani.

    Hi nani,
    1. what is required patch level to maintain ?
    SP level looks good but kernel looks pretty old , you can plan for a kernel upgrade.
    2.what is end for supporting SAP 4.7E and oracle 9.2.0.7?
    SAP R/3 Enterprise 47x110 - Extension of Mainstream Maintenance from December 2006 until end of March 2009
    SAP R/3 Enterprise 47x110 and 47x200 - Extended Maintenance from April 1, 2009 until the end of March 2012 (first year: additional fee + 2%, next 2 years: additional fee + 4% per year).
    3. what are your suggestions for future implementation?
    You should think about upgrading to ECC 6.0 and also implementing Solution Manager.
    thanks
    Prince

  • How do I stop automatic email notifications?

    How do I stop automatic email notifications?
    I had thought that I was subscribing to just a single thread but it appears that I'm now being notified about every message in every thread.  The last time I logged on I received over 200 messages.
    If it doesn't stop I will have to resort to changing my email address.

    http://forums.adobe.com/message/1876437#1876437
    Post #3,
    Juergen

  • Anyone know how to send automatic email notification in OA?

    Any where I can find a resource about how to send automatic email notification?
    say, samples, reference?
    please advice, thank you very much

    integrate your application with oracle workflow and send a notification from the mailer.
    details of working with workflow is there in the dev guide
    Thanks
    Tapash

  • Hi gurus, can any one explain me about patches in SAP?

    Hi gurus,
    Can any one explain me about patches in SAP?
    Regards
    Raghu

    Hi Raghu,
    If you do bit of googleing you will get information.
    http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm
    http://help.sap.com/saphelp_smehp1/helpdata/en/57/4e0eb0eae6457ea69b509813048989/content.htm
    http://help.sap.com/saphelp_nwce10/helpdata/en/a8/02784278b66255e10000000a155106/content.htm
    http://www.saptechies.com/support-package-stack-guide-sap-netweaver-70/
    http://www.sapdev.co.uk/upgrade/sap-patching.htm
    http://www.erpgreat.com/basis/sap-patch-administration.htm
    Regards,
    Deepanshu Sharma

  • 'Display a notification about every script error' not working in IE11

    Hi all,
    I want to see script errors when script errors occur in pages (as a developer). In older versions of IE when you enable 'Display a notification about every script error' a yellow icon appeared at the bottom of IE and when you clicked it, you could see what
    was wrong in the scripting.
    In IE11 this no longer works. Is this a bug ?
    Callant
    Callant

    "This is actually by design. The scenario you are describing is better served by the F12 developer tools, and in IE11 we disabled this dialog entirely because of the performance overhead these old dialogs incurred and the fact that the F12 tools
    are a better place for this information to surface."
    - Christian Stockwell [MSFT], The Internet Explorer Team
    Please see the Connect comments
    here.
    Please read:
    Using the F12 developer tools
    Regards,
    Vincenzo Di Russo
    Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
    Moderator in the Microsoft Community and TechNet Forums
    My MVP Profile

  • Preventive Work Order Dates Synchronization with its automatic created  notification

    Dear all,
    Preventive Work Order Dates Synchronization with its automatic created  notification
    My question was initiated from PM module forum, please check above URL if you have time.
    My ultimate problem is that :
         "SMOD" Enhancement  "QQMA0018" needs to receive its origin data of work order when the execution time of IP10 or IP30.
         so that I can decide/calculate desired dates on the notification according to its origin work order date .
    Do I need to use "export/import memory" statements to communicate with origin work order?
    if it's true
    Thanks for your help in advance.

    Dear Pete,
    I just made test data in our DEV server,
    Work orders has been created by "IP30" which was executed today with its maint. plan( date format DD.MM.YYYY ).
    below work order has been created and the basic start date seems derived from plan date.
    below image is showing our 'SPRO' configuration for the PM priority.
    "ZM03" order type is using "ZP" priority type.
    (I don't know why is this work order didn't take the values defined on 'priorities for Each Priority Type' for calculating "basic start" & "basic finish" date, it seemed just copied same date with PlanDate)
    you can see the notification which is created automatically by work order as below.
    "M4" notification type is using "ZP" priority type as well.
    It took the 'required start' date by adding 2 weeks from today(=creation date) as 'priorities for Each Priority Type' has defined and 'required end' date also set to 6 months later from 'required start' date.
    (Am I right?)
    Please let me know, if you need further information.
    Thank you for your help.

  • Getting error notifications about payment every month

    I get repeatedly notifications about payment information and finally the payment succeeds without changing even the information. Anyway the system doesn't accept correct address information and suggests abbreviated forms of billing address. The problem doesn't seem to be independent about the credit card used because I have tried four different cards.
    Yesterday I got once again error notification about payment (Action requirement: ...payment is past due). I the night I got "Thank you for your order" and payment confirmation and today again notification about the payment error.
    I don't know how to correct the information to make this work.

    tero ylonen, John is correct as you need to contact Adobe Support to get this corrected however I checked & found that you or your bank might have laid a restriction in making the payment for this Adobe product.
    Regards
    Rajshree

  • FM to send information notification to SAP inbox or external email-id

    Hi All,
    Need help. I need to send a information notification to user's SAP inbox and external mail id.Plz anyone tell which FM i can use for sending notification to SAP inbox and which FM i can use for sending notification to external mail-id??   plz help
    thanks and regards
    Nitin

    Hi,
    You can use the FM SO_OBJECT_SEND..Also please search in SDN forums..I am sure you will get lot of forums which already discuss about this..
    THanks
    Naren

  • Notification about new purchase made on other iOS device

    Hi,
    I would like to ask if there is an option to get notification about new purchases made on other iOS devices? Autodownload feature is cool but it's an "all or nothing" situation. I don't want to download every app to my iPad what I bought on my iPhone and vice versa.
    IF I remember well, when I set up my new iPhone and made a purchase on my iPad, iPhone asked me about turning on/off autodownload. But after that I have no notification. Or my memory is bad and it didn't happened.
    Thank You for your help!
    Janos
    P.S.: I know it is not the perfect community for my question but there is no community such as "App Store", "iOS App Store usage" as there is one for Mac App Store.

    Thanks for your answer! Yes, I tried that but that's not what I would like to use.
    If I turn on "Automatic Downloads" for Apps e.g. or Books, it'll download all the Apps I buy elsewhere.
    I would like to get only a notification like "You've downloaded XY app on an other device. Would You like to download it now?". Is there any option for this?

  • Notification about cache objects changes when node dies

    Hi Guys,
         Coherence 3.3.1/389
         .Net API 3.3.1.2
         Sorry, i did not find in forum something similar to my question.
         Well, i have this situation:
         I have 8 Coherence nodes.
         I have one client connected to Coherence node number 1.
         The client have been listening for notifications about cache objects changes.
         Coherence node number 1 dead for some reason (not enough memory).
         What's happened with the client which was connected to this node?
         I think it just reconnect to other one, but what's happened with notifications which occurs until the client reconnects?
         Regards,
         Dmitry.

    Hi Dmitry,
         Notifications are delivered only while the client is connected. So if the client or its proxy fail, upon reconnection, the client will need to recover appropriately.
         If you're using Coherence's built-in client-side data management features (such as Near cache or ContinuousQueryCache), Coherence will do this for you automatically (resynchronizing the local datasets).
         One other comment, the reconnection attempt is lazy and the client will not reconnect until your application code touches a clustered resource.
         (EDIT: If store-and-forward guarantees are required, then you can queue those messages on the server on a per-client basis in a dedicated NamedCache, which the client can then consume at its leisure whenever connected. This is an application-level construct.)
         Jon Purdy
         Oracle

  • Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

    I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

    In the patch 29, it is
    function encode_attachment(str) {
    var c, i, s = ''
    for (i = 0; i < str.length; i++) {
    switch (c = str.charAt(i)) {
    case ' ':
    case '#':
    case '?':
    case '%':
    s += NN ? '_' : escape(c); break
    default:
    s += c
    return s
    NO issues seen, Able to open attachment which has space in the file name.

  • Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    hello,
    After installing the Adobe reader, I got the following error message:
    Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

    For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

  • Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

    Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

    The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
    If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
    http://support.apple.com/kb/HT1212

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Maybe you are looking for