Automatic install of iOS7
Received a replacement iPhone 5 which has iOS 6 on it (woo!) but I got a notifcation earlier saying that iOS 7 was ready to install, although I did not download the update. I'm wondering if it will install automatically without me pressing 'install now', could anyone help me in regards to if it will with or without me pressing the button?
Thanks in advance!
Barring a very unusual circumstance, iOS 7 will not install unless you approve the installation. Note, however, that if you ever have to restore the iPhone from your computer, then it will install iOS 7 with no option for an earlier iOS version.
Regards.
Similar Messages
-
have the iphone 4s, when i installed the ios7 my wifi and BT i nost working, the wifi is in gray and i could no switch on. any solution?
http://support.apple.com/kb/TS1559
-
After upgrading to Firefox 36.0.4, it automatically installed noscript
After upgrading to Firefox 36.0.4, it removes all my existing add-on extension.
In addition, "noscript" was automatically installed and there is no way to remove it.
The "noscript" add-on does not show up in any of the add-on extension for me to disable/remove it.
I even tried adding noscript from the add-on so that the noscript add-on shows up in the
firefox extension page so that I could remove it but that does not remove the
original noscript that comes with Firefox 36.0.4
Hopefully there is a way for user to remove this and it is not part of Firefox 36.0.4.
At least allow user the options of using it or remove it.''cor-el [[#answer-710716|said]]''
<blockquote>
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
</blockquote>
Thanks Cor-el. This works. -
I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
New Hardware found but not automatically installed.
Hi there, Could someone please help me I've just bought a 5th gen 80gb and my computer recognises it but doesn't automatically install the hardware. It takes me to the install new hardware wizard and can't automatically do it. So I can't do anything with it.
5th gen 80gb ipod Windows XPHi jenny,
Ive just tried what u say its not workin' plus I tried my 0404 in my friends computer too it says the same thing "not supported product" when i try 2 install from the cd...
Im using windows xp sp1 should I try sp2 or go for the technical service (but i was using this card with latest drivers in sp1 like 2 months)
ps: one interesting thing is when i boot my computer it says creative audigy etc found now, my friends computer says "multimedia audio controller"..
update (I tried with sp2 its not workin)
Message Edited by whatudid2me on 10-27-200604:44 PM -
I have the iPhone 4S and have received a notice in the "settings" area indicating a "General" Software Update is available concerning fixes of bugs etc. I am sitting right next to my wi-fi network and am still unable to download and install the iOS7.0.2 download. You have a website listed on the window but that appears to be a non existant site and I cannot even communicate my problems to you via that site. What the heck is happening? Why do you send me boggus info to download and then not allow me the opportunity to do so? I never had these types of problems with SAMSUNG!
Wendell J. Putnam
President - Cardell Enterprises 719 339-4792Okay genius, try reading before posting.
These are user to user technical support forums.
No one here sent you any notification or posted any such website.
Plug the device into a computer running iTunes and update. -
Can I maually check for updates but prevent them from being automatically installed if it turns out one is available?
Background:
In options I have "check for updates, but let me choose whether to install them" ticked. This works fine, in that I periodically receive a notice of an available update, and it will ask me whether I want to I want to install it.
But there are certain times -- for reasons I won't go into here (unless requested as part of seeking a solution) -- where I want to manually check for new versions, but RETAIN the ability to decide whether or not to install it. But if I click Help/About Firefox/Check for Updates, and it finds an update, it will immediately proceed to install it without asking for permission. While that seems quite inconsistent with my update preferences in Options, it is apparently normal behavior as described in https://support.mozilla.org/en-US/kb/update-firefox-latest-version#w_how-do-i-manually-check-for-updates.
So is there any way I can manually check for new-update availability but then refuse the update if I so choose? Once an unwanted install begins, I'm concerned that if I click cancel I could end up with a partial installation or some "messed up," duplicated or corrupted FF files (e.g., multiple versions appended with (1), (2) etc, similar to what sometimes confusingly happens when I do an XP System Restore).
Thanks.I think what needs to be made very clear here is that when a user clicks on "check for updates" the software should bloody well CHECK for updates and most certainly SHOULD NOT proceed to download and apply any updates. this is misleading and intrusive.
I just wanted to check if there was an updated version but I DID NOT want to actually update at that moment. the software downloaded data, costing me money and tried to apply the update which could have potentially messed up my settings if I had not checked everything was ok first.
I actually discovered how to prevent the update by searching through windows and manually deleting the files but why should anyone have to go to such lengths?
the software should simply do as it is asked, not do things that have most certainly not been asked. -
Yesterday this was automatically installed. Today I can't access a document in Pages. A prompt says I need a Pages update. But the next screen tests for updates and informs me everything is up to date. What's up?
It's highly unlikely that the Pages update problem has anything to do with the ARD client update, since the client is not involved in any way with Software Update. I'd suggest asking for assistance with the update problem in the forum appropriate for your version of Mac OS X.
Regards. -
Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.
Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
Reader will not automatically install updates on Windows 7
I have looked through the forums and have not seen this exact symptom mentioned:
"Automatically install updates" does not seem to work correctly on Windows 7. The updates download and I see the "update is ready to install" bubble in the system tray repeatedly. However, the updates never seem to install. I've seen this on more than one Windows 7 machine (it works ok on XP). I suppose this could be something particular to our environment, but I'm at a bit of a loss as to where to look next. Leaving the system "idle" does not seem to help and the behavior does persist after a reboot.
(I'm running Process Monitor right now and see AdobeARM.exe occasionally and successfully creating and exiting a thread, but not touching any files or registry entries.)
I enabled this setting via the registry -
[HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe ARM\1.0\ARM]
"iCheck"=dword:00000003
- and can see in the GUI that it has taken effect.
I do see some files in this directory - does this look correct?
C:\Users\All Users\Adobe\Reader\9.3\ARM>dir /s
Volume in drive C has no label.
Volume Serial Number is 8EC5-7A43
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM
07/07/2010 08:00 AM <DIR> .
07/07/2010 08:00 AM <DIR> ..
07/07/2010 08:00 AM <DIR> 19872
07/06/2010 08:05 AM <DIR> 882
06/20/2010 04:01 AM 8,040,960 AdbeRdrUpd933_all_incr.msp
07/07/2010 08:00 AM 368,779 AdobeARM.bin
06/09/2010 04:06 AM 385,536 ARM.msi
06/23/2010 07:45 AM 28,160 Reader9Manifest.msi
4 File(s) 8,823,435 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\19872
07/07/2010 08:00 AM <DIR> .
07/07/2010 08:00 AM <DIR> ..
06/09/2010 04:06 AM 331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM 976,832 AdobeARM.exe
06/09/2010 04:06 AM 70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM 331,176 ReaderUpdater.exe
4 File(s) 1,709,768 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\882
07/06/2010 08:05 AM <DIR> .
07/06/2010 08:05 AM <DIR> ..
06/09/2010 04:06 AM 331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM 976,832 AdobeARM.exe
06/09/2010 04:06 AM 70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM 331,176 ReaderUpdater.exe
4 File(s) 1,709,768 bytes
Total Files Listed:
12 File(s) 12,242,971 bytes
Any suggestions appreciated. Thanks - AndySome additional information. I'm seeing "GetLastError(): 0x2 - The system cannot find the file specified" in c:\users\(me)\appdata\local\temp\AdobeARM.log. But even using Process Monitor, it's not clear to me which file cannot be found.
Still seems to me that updater is downloading the update but never trying to apply it. The most recent thing I have tried is to quit AdobeARM gracefully and restart it. That does seem to have reduced the number of subdirectories in C:\ProgramData\Adobe\Reader\9.3\ARM\ to only one (previously there had been one subdirectory per run).
Thanks for any suggestions -
[2010-07-09 08:08:50] C:\ProgramData\Adobe\Reader\9.3\ARM\
[2010-07-09 08:08:50] GetLastError(): 0x91 - The directory is not empty.
[2010-07-09 08:08:50] ARM returns ERROR_SUCCESS
[2010-07-09 08:08:50] Adobe ARM 1.1.7.0 logging finished.
[2010-07-09 08:10:38] Adobe ARM 1.1.7.0 logging started.
[2010-07-09 08:10:38] Command Line:
[2010-07-09 08:10:38] GetFileVersion(): C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
[2010-07-09 08:10:38] File version: 9.3
[2010-07-09 08:10:38] Build number: 2
[2010-07-09 08:10:38] Revision number: 163
[2010-07-09 08:10:38] ProductCode: {AC76BA86-7AD7-1033-7B44-A93000000001}
[2010-07-09 08:10:38] ProductName: Adobe Reader 9.3.2
[2010-07-09 08:10:38] ProductVersion: 9.3.2
[2010-07-09 08:10:38] ProductRegistry: SOFTWARE\Adobe\Acrobat Reader\9.0
[2010-07-09 08:10:38] ProductInstallDir: C:\Program Files\Adobe\Reader 9.0\
[2010-07-09 08:10:38] Found preference AUTO_ALL.
[2010-07-09 08:10:39] ArmUpdate record found.
[2010-07-09 08:10:39] GetFileVersion(): C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2010-07-09 08:10:39] File version: 1.1
[2010-07-09 08:10:39] Build number: 7
[2010-07-09 08:10:39] Revision number: 0
[2010-07-09 08:10:39] New file object: AdbeRdrUpd933_all_incr.msp
[2010-07-09 08:11:08] C:\ProgramData\Adobe\Reader\9.3\ARM\29139
[2010-07-09 08:11:08] GetLastError(): 0x2 - The system cannot find the file specified.
[2010-07-09 08:11:08] Updated time stamps for 4 files -
I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this version, and they have no fix for it yet!
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
should I install each update in successive order? Or will installing the 10.7 update automatically install every previous update? I have FCPX 10.0.0 currently. Dumb question?
Installing 10.0.7 negates the need to install previous updates. Just install it (it will upgrade your projects to a newer format as well, from memory).
Thankfully, the days of doing it the way you were thinking are well behind us. -
HT6162 trying to install update iOS7.1.1 asking for passcode ?
trying to install update iOS7.1.1 asking for passcode ?
It is asking for the four digit Passcode you use to unlock your iPhone.
-
On initial install of ios7 I accidentally added my husbands iphone number to my iphone. How do I remove it? I am getting all of his messages.
Unfortunately I'm not sure there's much I can do to help. When your contacts are deleted it's not unusual to still see this when you text or use spotlight search. The device retains some residual contact information in cache memory even when the contacts are deleted. However, there's no way to access this directly, or transfer it back to your contacts on your device. If you have a backup of your device, you may be able to recover them by restoring to the entire backup, however this is not always successful. If you want to try, and your backup is in iCloud, use this procedure to prevent any recovered contacts from being overwritten by iCloud:
Ensure the device is connected to your local network.
Start the restore from iCloud back up.
Allow the devices settings to restore (watch for the confirmation of completion).
As the apps begin to restore pull the connection to your router WAN port (the one that goes to the telephone point).
Wait for the time out confirmation.
Navigate to settings > iCloud and turn off contact syncing (keep contacts when prompted).
Reconnect the router to the internet and let the restore process complete.
Delete the iCloud contacts from iCloud.com on a computer.
Navigate to settings > iCloud and turn on contact syncing (merge contacts when prompted). -
I installed the ios7 in my iPhone 5 mail problem
I installed the ios7 in my iPhone 5 and now I can not see the messages receives on my Hotmail?
You don't need the iTunes app. If you can't connect to your computer that's not the reason. You connect using iTunes on your computer. Your computer must be running Snow Leopard for an iPhone 5.
Maybe you are looking for
-
How does Time Machine handle disconnected external media drive ?
I have an external drive connected to my iMac, and backup to a Time Capsule. I prefer not to keep that external media drive connected all the time... When I disconnect that external media drive and Time Machine runs, does TM perceive this as "deleted
-
Exclude asset in search by metadata
Hi, I'm trying to exclude some assets by a customized metadata. The metadata is named for instance 'skipsearch', it has the type of 'checkbox'. I'm using predicate to query the repository. Here's my code: type=dam:Asset path=/content/dam/geometrixx p
-
how to rise exception when the cursor returns no data,suppose begin for rec in (select * from scott.emp e where exists ( select 1 from scott.emp where e.deptno=30 )) loop dbms_output.put_line(rec.ename); end loop; exception when no_data_found then db
-
Hi Experts, I have a program for barcode printing. Now the problem is we have some logic at the end of which the printing is performed. But there is some text that we want to change in the print. But I am not able to find how the print is triggered.
-
I have a problem concerning version names within one Aperture project. Some of the version names are missing (below image in browser view), while others remain unaffected. I have gone through the VIEW menu and looked at meta data displays, as well as