Automatic integration of SU01 user in to PPOMA

Hello experts,
We want to implemet Automatic integration of SU01 users in to PPOMA:
I.e. when ever user id is created from SU01, these users should be auotomatically assigned to the Org along with some default attributes in PPOMA based on certain criteria like cost center, user group, user role, profile etc.
Is there a Badi / Bapi so that report can be scheduled and newly created SU01 user gets the appropriate attributes in PPOMA without using USERS_GEN
Thanks,

Irahed. it may be possible. but you must ensure that always department is same 5XXXXX and  you can write a small program for this and run batch .
since you must decide always which department it was supposed to assign.
do you remember vendor sync happen via batch in this same method .
since it has fixed vendor org permanaently.
muthu

Similar Messages

  • SU01-user replication from HR to SRM

    Hello together,
    I have a question. We have a central SAP HR tool which contains all SU01 users of the company. We would like to replicate all SU01 users which are maintained in the HR tool to SRM. This is not about creating BPs or integrating them to the PPOMA. The background is that the HR-Structure is quite different to the purchasing strcuture in SRM. Second thing is that not all users in HR need to be active in SRM at the moment <10%.
    This is only the replication of all SU01 users.
    Any idea? I appreciate your feedback.
    Thanks in advance
    Jens

    Hi,
    How about using Central User Administration or USERS_GEN transaction?
    http://help.sap.com/saphelp_nw70/helpdata/en/08/ed591f9ff00343952f11a7b707f28a/frameset.htm
    Regards,
    Masa

  • Creating portal users from SU01 users

    Hi,
    We are on SRM 7.0 and have a requirement that whenever an SU01 user is created, a portal user should also be created immediately corresponding to this SU01 user.
    Since we are also using SUS, whenever an admin supplier creates a contact person for his company, an SU01 user is created at the backend. We want this contact person to be created automatically in the portal. Currently its an offline activity where the admin supplier calls up the helpdesk to enable his contact person in the portal.
    Pl shed some light on this.
    Thanks & regards,
    Nikhil

    Thanks for the update.
    We don't have an LDAP and hence option 1 is ruled out for us.
    If i have the Portal UME as a data source, then how to replicate the users that are created in SRM?. The Users are created an SRM for EBP-access as end users, approvers, purchasers, bidders etc... and how to replicate these users to the Portal?. The SUS users are accessing both SUS functionality and bidder functions and hence they need to be in Portal Or they have to go to 2 different links with different password and hence we need to replicate the SUS users to the Portal too.
    We are not considering CUA as of now and hence as of now this is ruled out too.
    Any pointers/suggestions are highly appreciated.
    Thanks
    velu

  • User creation from existing SU01 user

    Hi All
    While creating a user from an existing Su01 user, i am getting the follwoing error:
    'Action is not possible, HR/ALE distribution active'
    Could someone help me with this ?
    Regards

    Hi,
    We are facing same issue " HR/ALE distribution is active. Distribute the user information newly".
    But in our case we have HR integration is there since all HR master coming from HR system. Now this is strange because we are facing this issue only for one user. Rests of the users are ok.
    I think in our case we can not change the status of PBPHR as off.
    Is there any other opinion on this?
    Thanks,
    SRM

  • C4C & Lotus Notes integration for service users

    Hi,
    I tried to find information about C4C and Lotus Notes integration for service users without success. User manual says on Sales both Outlook and Notes, but in Service only Outlook. Does Lotus Notes add-in work for service users similar than sales users? Is there anywhere demo video for that? I can only found demo video for sales (SAP Sales OnDemand Outlook Integration Demo (new) - YouTube).
    -Aatos

    Hi Aatos,
    The Lotus notes integration currently supports the "Field Service" role in Cloud for Service where you are primarily servicing customers in the the field and have direct email communications with your customers. In this use-case, similar to "Field Sales" (AKA SFA Users) in Cloud for Sales, you can receive an email from a customer, get information about that customer from Cloud for Customer via the Lotus Integration, and be able to upload that email into Cloud for Customer as an email activity to track the email correspondence between the user and the customer.
    However, the Lotus notes integration does not support the "Call Center" role in Cloud for Service where you are a contact center agent in a centralized service center processing emails that are routed into a common inbox and all correspondence is sent out in behalf of a central inbox such as [email protected] In this usecase all emails automatically create tickets and all emails both inbound and outbound are automatically recorded as email activities without customer or user intervention. The email client for this usecase is either a C4C email client or Windows Outlook Client as you found in the documentation.
    Thanks,
    Rei

  • HT1198 If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own

    If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own iPhoto application??

    Have you read this Apple document regarding sharing a library with multiple users: iPhoto: Sharing libraries among multiple users?
    OT

  • SharePoint 2013 and Windows authentication (integrated) or SharePoint user for report data source

    Hello,
    I am having issues creating report datasource in "Windows authentication (integrated) or SharePoint user" in SharePoint 2013. I followed the steps mentioned in the link http://blogs.msdn.com/b/psssql/archive/2014/04/28/sharepoint-adventures-using-claims-with-reporting-services.aspx.
    I am just stuck in the delegation piece here. I have a SSAS instance by name "XXXXAPPV01\Multidimensional". First thing is what is the procedure to set SPN for this instance? I need to add this service in the delegation tab so that C2WTS service
    configured correctly.
    Nothing but I should be able to access my SSAS 2012 cube from SSRS 2012 by "Windows authentication (integrated) or SharePoint user" as the authentication method.
    Palash

    I used the below command to set SPN for analysis services.
    setspn -S MSOLAPSvc.3/XXXXAPPV01APPV01.xxxxdmo.local:Multidimensional xxxxdmo\svcMyService
    After setting the SPN for this service account I added this account(xxxxdmo\svcMyService) in the delegation tab of my domain account created earlier for claim service (xxxxdmo\svcC2WTS). Now in service type it shows -> MSOLAPSvc.3, User or Computer it shows
    -> XXXXAPPV01APPV01.xxxxdmo.local and in Port it shows -> Multidimensional. This is in my svcC2WTS account delegation tab. Still I am not able to connect datasource by "Windows authentication(integrated) or SharePoint User". I am getting the
    same error "Cannot convert claims identity to windows token".
    I am not sure what am I missing in this configuration piece yet to get this working.
    Palash

  • Error message in creating EBP users from existing SU01 users

    I am getting the following error messages when i try to create EBP users from existing SU01 users using users_gen: Error during creation of user: User not created or error(s) occurred during user creation. ``Central person`` already exists for user (BBPU_MESSAGES 042). Pls what does it mean and how do i solve this?

    Babalola-
    The message is indicating that the user you are attempting to create was previously created in the EBP system.
    First I would try to correct the user via users_gen using the "check users" option.  This may repair the user, but if the user has lost the association to the org then you will need to take some manual steps to re-establish the links for the user in the org details.
    If this doesn't correct it, then use transaction PP01 to correct/verify the following relationships for the user.  Start with the org unit and work your way down looking for the broken link/s.
    Here are the required relationships for the objects:
    ORG UNIT:
    Relationship     Object
    B 003          Position(of user)
    POSITION:
    Relationship     Object
    A 003          Org Unit
    A 008          Central Person (of user)
    A 008          User
    CENTRAL PERSON:
    Relationship     Object
    B 008          Position
    B 207          Business Partner
    B 208          User
    USER:
    NONE
    BUSINESS PARTNER:
    NONE
    Hope this helps you.
    b

  • Automatically Login Windows System User In TestStand 3.1

    I have checked the "Automatically Login Windows System User" in TestStand 3.1. However, when I re-start TestStand I still have to enter the password each time. Why is this happening? Both the username and password do exist in the Users.ini file. I am using Windows XP SP3. I have already talked to a NI support engineer and they did not have an answer. Thanks for the help.
    Felix 

    Hi ic2118,
    Can you move the Users.ini file (C:\Program Files\National Instruments\TestStand 3.1\Cfg) to a new location and restart TestStand. The file may have been corrupted and moving it out of the Cfg folder will force TestStand to create the file again.
    Regards,
    Michael M
    NI Americas | AE

  • [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null

    Hi,
    I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
    [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
    Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
    I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
    Oh, and this happens only with the projects which deal with JMS queues.
    We are using OSB:
    Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
    Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
    Please help.
    Thanks,
    Mukund.

    Hi,
    I am getting this error while trying to activate a session in OSB (clustered env with 3 nodes). I have a OSB project which listens to a JMS queue. I was able to create the project fine and was able to activate the session, no issues. But when I tried to update the queue name or delete the project itself, this error gets thrown:
    [ConfigFwk:390105]Unable to create WLS change list due to a short term automatic lock obtained by user null. The user has no pending changes and the lock will expire in 600 seconds. Please try again after the lock has expired.
    Retrying after those seconds takes me back to the same error but the time get's reset to 600 sec.
    I can change the code in that project and activate the session without any issues but if I change any configuration for proxy/business services or delete the project itself, i get this error. the only way to get around this issue is to clone the project and make changes to the cloned project. But, that is not the solution i am looking for as I don't want to keep a old version of the project and don't want to keep creating new queues everytime (since no two proxies can point to the same queue).
    Oh, and this happens only with the projects which deal with JMS queues.
    We are using OSB:
    Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
    Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0.10 PSU Patch for BUG19637463 TUE NOV 04 15:54:42 IST 2014]
    Please help.
    Thanks,
    Mukund.

  • Report for converting SU01 users to EBP Users.

    Hello experts,
    I would like to know if there's a report that converts SU01 users to EBP users. I know there's a standard report by means of trans. USERS_GEN -> Create Users from SU01 users, but this is of no use since I can't <u><b>massively</b></u> map users to their respective Org, Unit.
    Standard report only asks for ONE organizational unit...
    Has anyone developed such report?
    If so, please let me know and send me an e-mail to: [email protected]
    Regards,
    Gilberto Gallardo

    Gilberto,
    Hi. I have found the logic from report BBP_UM_EXAMPLE_EMPLO_CREATION quite useful.
    Cheers
    Rob

  • How can I avoid automatic build of an User Code Block at SystemBuild

    Hi,
    I've created a simulation with a User Code Block at SystemBuild. I want the building process to be performed manually, so I changed the buildProcess tag in xml file which is generated by SystemBuild to "Manual". Unfortunately it doesn't work. When I try to execute the simulation, the xml file is overwriten, the buildProcess tag is set to "Automatic" and the software tries to build the library again. How can I avoid automatic build of an User Code Block at SystemBuild?
    Thanks.
    Attachments:
    fileInterface.zip ‏1 KB

    The xml file generated when a UserCodeBlock is linked usually contains the following at the top of the file:
    <DynamicLib xmlVersion="1"
                architecture="WIN32_DLL"
                rtLibLinkage="Dynamic"
                buildProcess="Automatic"
                debug="no">
    To prevent sim from automatically rebuilding your UCB dll change the tag buildProcess to "Manual"
    Bob Wilson
    MATRIXx R&D

  • Migration SU05-users to SU01-Users

    Hello all, we have updated our ECC 6.0 QA system with the EHP4 update.  As mentioned, in the OSS note for the EHP4 update transaction SU05 is no longer available but the note mentioned and no other notes give information on how to handle these users from this point forward.  Through some posts on this site it appears that there is a function module SUSR_INTERNET_USER_MIGRATION that may be the way to migrate these users.  I have also read there may need to be an internet reference user set up prior to running this migration but haven't been able to determine specifics for this user (for example, does the username have to be a specific one, what roles or profiles should the user have, etc).
    Any help in this matter will be very appreciated.
    Thanks,
    Scott

    Hi,
    Have you checked [this thread|Migration SU05-users to SU01-Users;? Wolfgang's post looks like one which answers for you. Have a look also if there is a migration solution from SAP for your scenario.
    Cheers

  • Is it true that Apple is now pushing out iOS 7 updates to devices automatically and without a users' permission?

    Is it true that Apple is now pushing out iOS 7 updates to devices automatically and without a users’ permission?

    Some people say that it has downloaded automatically when their phone is plugged in and connected to Wi-Fi, but I have left my phone and other iOS devices plugged in overnight several times since the iOS 7 release and have not experienced the same.

  • Update users name in PPOMA from SU01

    Hello together,
    I am having a question. Is there a report or FM available which allows me to update the users name in the PPOMA with the data from SU01. While creating users with czech characters with the transaction users_gen, the file has been corrupted somehow and now the display in PPOMA as well as the approval process is not very nice. The users already cleansed their names but the PPOMA is still crap. What can I do here?
    Thanks in Advance
    Jens

    Hey Muthu,
    The problem is that the users are already in the system, assigned to a node and ordered shopping carts. The users changed their names by using the personal settings but still the PPOMA is not updated correctly. The US-users are updated but the Business Partner as well as the PPOMA-user remains wrong.
    We are using SRM 4.0.
    Thanks in advance
    Jens
    Edited by: Jens Ilschner on Aug 7, 2008 7:03 AM

Maybe you are looking for