Automatic loading of similar/identical request from infocube

Dear all,
Any one can give the description of Automatic loading of similar/identical request from infocube].please
Thanks
Rave

Hi,
From help.sap
Automatic Deletion of Requests from the InfoCube when Loading
To ensure that the data that is going to be loaded with an InfoPackage is available only once in an InfoCube, you can delete from the InfoCube any existing requests that have partially overlapping or similar selection conditions and relevant deletion selections.
After loading new data into the InfoCube, the InfoCube contents are checked using the selection conditions for an InfoSource/DataSource/source system combination, to see if overlapping data has been loaded into the InfoCube. The data that has been loaded into the InfoCube is not analyzed rather the selection conditions for the InfoObjects that you determined in the Scheduler are compared.
With this function the dataset in BW is reduced to the size necessary for analysis, and redundancies are avoided.
Check this link for more
http://help.sap.com/saphelp_nw04/helpdata/en/f8/e5603801be792de10000009b38f842/content.htm
Regards,
R.Ravi

Similar Messages

BW 7.0 Automatic Deletion of Similar/Identical Requests from the InfoCube

Hi experts,
In BW 3.5 we have used a feature in a InfoPackage, where you can delete an u201Coldu201D loading, u201CAutomatic Deletion of Similar/Identical Requests from the InfoCubeu201D.
Now we are building a flow in our upgraded system and we can see that this opportunity is available in the InfoPackage to the PSA, when you load data from the source system (ERP) to the BW system but we would like to make this when we load an InfoCube some layers up (see exemple below; InfoCube2)
Source System -> PSA -> InfoCube1 -> InfoCube2
Anyone know if it is possible or if there is anything else you can do?
Regards,
Kerstin

in bi7 the load to the datatarget is done using dtp. the infopackage goes only to the psa. in order to achieve the same you need to use the process step in the process chain. you need of course to create a correct variant, but here you'll have the same options as you had before in the earlier version.
M.

Unable to automate deletion of old data (requests) from InfoCube using a PC

Each week I copy open Notifications into a 'SnapShot' cube, from the Transaction Cube, using the current date to make it a unique copy/snapshot for that week. This is then reported on showing, amongst other things, the trend of open Notifications throughout the year.
In an effort to ensure this doesn't grow too big, I will only keep a rolling 52 weeks of data. I thought I could use a feature available when creating Process Chains called 'Delete Overlapping Requests from InfoCube' to manage the amount of data held (52 weeks only).
The variant used to delete the requests has been created linked to object type 'Data Transfer Process' (DTP) and the actual DTP used to load the 'SnapShot' cube ... I then click the 'delete selections' button. On the next window I select 'Request Selection Through Routine', then click 'Change Routine'. I entered the following code, which I borrowed from another thread:
data: datum(16) type c,
date type sy-datum.
date = sy-datum.
date = date - 365.
break-point.
concatenate date sy-uzeit into datum.
loop at l_t_request_to_delete.
delete l_t_request_to_delete where timestamp gt datum.
endloop.
append l_t_request_to_delete.
p_subrc = 0.
I get a message saying "No Requests for deletion were found'. Any ideas?

HI Tony,
Please check whether the timestamp value you are popolating i filed datum with the following statement:
concatenate date sy-uzeit into datum.
has same data format and type as the timestamp for the request.
If this is not same then you will not be able to find any request corresponding to timestamp.
- Geetanjali

Delete Overlapping Request from InfoCube.

Hello,
I am using process Type "Delete Overlapping Request from infocube" in this I am selecting object type as a "DTP"
Under "Delete Selection" I am selecting following
1. Only Delete Requests from same DTP
2. Only Delete Full DTP request
3. Only Delete DTP Requests from Same Source
I am using "Full Load" in my DTP.
My requirements are like I need to delete old data and load new data every day in to a cube for that I am using this process type.
If anybody have better solution please let me know.
Thanks,

Also
I am not deleting Index OR Not creating Indexs while using process type "Deleting overlapping request InfoCube"
what will be the impact on the cube?
How many index will have infocube?
If the cube having more than one index if i delete index, which index will be deleted?
Thanks,

Duplicate records: Process : Delete Overlapping Requests from InfoCube

Hi Experts,
We are loading data in standard costing cube with standard available option Full upload. In our process chain we have included process type "Delete Overlapping Requests from InfoCube". In our scenario we always load yesterday and today's data. In this case after loading yesterday's data, we need to check and delete the overlapping requests and then upload todays data.
Many a times this deletion process is failing due to message "Couldn't lock cube" because it is already locked by user "ALEREMOTE". This cause system to duplicate the records in cube.
How we can avoid this?
Alok

I tried running again and it again failed. Checked in SM12 and found this entry
800 ALEREMOTE 08/14/2007 E RSENQ_PROT_ENQ CREA_INDX ZCCA_C11 DATATARGET CREA_INDX ###################################### 0 1
This locked is not released since 14th. Is there way to remove the lock using some process.

Process Maintenance: Delete Overlapping Requests from InfoCube

Hi Experts,
How can I open Process Maintenance: Delete Overlapping Requests from InfoCube Screen? What's T-code? Is that in Process Chain? Please tell me that....
Thanks in advance,

Hi
'Delete overlapping request' is an option(its a process type) in the process chains..
RSPC>Process types>Load Process and post process folder--->Delete overlapping request from the infocube..
here you can have more options like 'source systems are same',and infosources are same etc...
How to delete most recent request in a Cube by using process chain
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 28, 2008 11:35 AM

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

"Delete Overlapping Requests from InfoCube" in a Process Chain

Dear all,
I encountered a problem when I building the process chain in BW 3.0.
In a process chain, I schedule daily an InfoPackage to load data to an InfoCube and then delete the previously loaded data by the same InfoPacckage from the InfoCube.
For example, I have 2 InfoPacakge, A and B, and schedule to load data to InfoCube C. In the process chain, I scheduled daily the following tasks in sequence:
- Delete index in InfoCube C
- Load data through InfoPackage A to InfoCube C
- Delete duplicated request previously loaded through InfoPackage A in InfoCube C
- Load data through InfoPackage B to InfoCube C
- Delete duplicated request previously loaded through InfoPackage B in InfoCube C
- Create index in InfoCube C
However, when I activate the process chain, a warning message is prompted: No type "Delete Overlapping Requests from InfoCube" process allowed infront of process "Execute InfoPackage" variable ZPAK_4GMFI
Would anyone tell me why such warning message is prompted?
Many thanks!
Best regards,
Marcus

Hi all,
Re Ranjan:
I previously config the process chain like that:
(1)   Delete index in InfoCube C
(2)   Load data through InfoPackage A to InfoCube C
(3a) Delete duplicated request previously loaded through InfoPackage A in InfoCube C
(3b) Load data through InfoPackage B to InfoCube C
(4)   Delete duplicated request previously loaded through InfoPackage B in InfoCube C
(5)   Create index in InfoCube C
where (3a) and (3b) is executed simultaneously.
However, (3b) often reports error. I guess it may be due to the parallel run of (3a) and (3b). So that's why I set the process chain to be executed in serial.
Re Jacob:
I found that the process chain can be run even a warning message is prompted when activating the process chain!.
Thanks you all for your kind support!!
Best regards,
Marcus

Delete overlapping requests from infocube

Hi ALL,
I have loads to infocube from 5 diffrent infopackages loading adhocly or randomly from same source sytem and same infosource.
Note:infopackages have dynamic selections.(ex calweek,product)
My requirement: If i load infopackage-1 today,and when i load the same infopackage next time the prevoius load should be deleted .
I need the same functionality for other 4 infopackages.
So at given point of time i should have only 5 requests in the infocube.
These are the settings i have done.
1)At infopackage level i have selected option Delete existing requests : overlapping
   Without selecting any conditions like infosources,source sytem are same.
2)Added process type in the process chain delete overlapping requests from infocube
   selected option: Delete existing requests : overlapping.
   Without selecting any conditions like infosources,source sytem are same.
Are these settings are enough or is there in best way to do this .
Please suggest me ...

Kishore,
Delete overlapping requests means, delete request with same selection only. If data selection not same, i dont think it will delete any previous request.
You can select infosource, source system. No issues. System only deletes request if data coming from same infosource or from same source system for same selection.
But in your case selection changing every day or for every load. I dont think it works.... Try once in DEV.
If i understand correctly, as you only needed latest 5 requests only, why cant you delete data completely before loading / starting new set of requests...?? This is easy, quicker and better approach.
But only problem is data will not be available during loading of new set of requests.
Srini

Delete Overlapping Requests from InfoCube: Before or After the Generate Ind

Hi,
Delete Overlapping Requests from InfoCube Before or After the Generate Index of the Infocube? Why?
I think "After", but the system (transaction RSPC)suggest 1.Generate Index 2.Overlapping Requests from InfoCube ...
Thanks
Alessandro

Hi Alessandro,
Bottom Line Index will speed up the Process. While loading the Data you need to delete the Index.
Index will degrade the performence while updating or modifying DB Entries(Loading). Index will improve the performence while reading the DB(Reporting).
It's not with BW. all RDBMS need this.
Regards,
Nagesh.

Unable to Delete failed requests from Infocube

Dear Experts,
I tried to uploaded the data through flat file. Since it has gone to Idle state i Killed the process. Now i Need to delete the red request from Infocube but It is not allowing me to delete the failed request. If I do so, I am getting ABAP runtime error.
Please Suggest me . Its bit Urgent
Many Thanks,
Suraj

Hi Suraj,
There is might be a deadlock detected in the system
So go the reqeust
click on the details tab
Each Package which is yellow or red has to be updated manually (right click Manual Update). This can take few minutes.
Change request status to green
Change to Status doppleclick on total status
Change from red to Delete status;back to request status
Note:
This case is only applicable, if the data are stored in PSA.

Message_type_x short dump while deleting request from infocube

Hi,
While deleting one of the erroneous requests from some infocubes,
system is resulting in short dump "MESSAGE_TYPE_X".
This is happening only with respect to some infocubes.
Description of short dump:
Short text of error message:
System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-5- (see long text)
Can any one of you please help with this?
Regards,
Nilima Rodrigues

Hi NILIMA,
I got same problem with my InfoPackage last month with same error msg.
that error come due to data inconstancy in data base table.
in my case i am unable to open my InfoPackage and after double clicking it was giving dump with same error.
If u know abap then just change the sy-subrc value from 4 to 0 before dump line code it will resolve your problem.
for this on dump screen click on debugger button then it opens your code and shows line on which u getting dump with table name check your entry in table ok
if u unable u find table then do one thing just put break point before dump line and open fresh rsa1 and go to same cube and double click it will stop on your debugger point just press f5 button it shos sy-subrc 4 convert it to 0 and press edit button and press f8 .
Regards
Ankit

Deleting Request from cube based on Selection Condition

HI All,
I have a scenario where i have three selection condition while i update from ODS to CUBE . I keep getting differnet versions of the file so the latest version should replace the old version , to do this i tired using the option
Delte Request from Info Cube after Update in the Data Tagets tab
And the Radio button Overlapping is checked . ( This is not working )
The three selection conditions in Info Pacake are
Reduest id from ODS : 11111
Cal Month                 : 20072
File Type                   : B
The selecion condition for the second Version in Info Pacake of the same file that should replace the first file in cube is
Reduest id from ODS : 22222 ( The request id is RID in the ODS for second file )
Cal Month                 : 20072
File Type                   : B
so can any one let me know how can i achvie this ........

Hi Abraham,
   You select the variable deletion conditions when you schedule the InfoPackage that is going to load the new data. On the Data Targets tab page in the Automatic Deletion of Similar/Same Requests from InfoCube column, you click on the pushbutton to go to the Deletion of Requests from the InfoCube After Update dialog box.
Here you determine under which conditions existing requests are deleted from the InfoCube:
·        You can include update modes, InfoSources, DataSources, and source systems for requests.
Example
Requests are deleted when the appropriate deletion conditions are met if existing requests and new ones were loaded from the same DataSource.
·        You can determine whether the selections for the new request need to be the same as or more comprehensive than the selections of the request that is to be deleted, or whether the selections for the new request need to completely or partially overlap the selections of the request that is to be deleted.
·        You can specify deletion restrictions according to date. This means that, when the deletion conditions are met, only those requests that were loaded within a specific time period are actually deleted.
Example
If you choose Data for the Request from the Last Seven Days, only those requests are deleted that have been loaded in the last seven days.
·        You can specify situations in which a request is not to be deleted, even if the appropriate deletion conditions are in place.
Example
If, under Exceptions, you choose the Today is the Last Day of a Month, existing requests are not deleted, if the new request is loaded on the last day of a month.
·        Another option for determining deletion conditions is creating a user routine for the InfoPackage and the InfoCube. In this routine you can exclude requests from a deletion process or include additional requests for deletion.
Check conditions again, it will work, if selection and data source is same.
Hope it Helps
Srini

Automatic load of bank account from transaction FEBAN

One of the search possibilities in FEBAN is the search of customer number by bankaccount.
Is there a possibility to automatic load the customer bank accounts from the electronic bankstatement into SAP.

Hello,
I think you still do not understand my question.
I am looking for a facility to load automaticly the customer bankaccounts deliverd in the electronic bank statement in the masterdata of the customer.
May be some one knows a userexit to facilitate this.
So, next to the reconcilliation of the open items the bankaccounts in the masterdata of the customer should be updated with the most recent values (table KNBK)
Greetings,
Roelie

Delete a particular request from a InfoCube after compression in sap bi 7

HI ,
Issue : I wand to delete a particular request from a InfoCube after compression in sap bi 7.0 ; (not in sap bow 3.x).
can any one suggests me how to do .give me possible solutions.
Regards,
EdK...

Hi,
You can delete the perticular request from Infocube by useing'RSICCONT'.
Goto SE16, give the 'RSICCONT' then Select your Cube and Select Execuite.
It will display the list of requests. you can select the perticular request and deleted from cube.
Edited by: Suman Reddy.Vuyyuru on Mar 18, 2010 12:38 PM

Automatic loading of similar/identical request from infocube

Similar Messages

Maybe you are looking for