Automatic message to display lotus-notes through workflow

Hello Every one,
In QA32 transaction when inspection lot is created for particular inspection materials. as soon when saved button is clicked automatic wrk flow to be triggered to particular sap users....is thr any userexit or BADI to do this...and plz explain in details...reward points....
Regards
Martin

Please give a solution its urgent.
Points will be rewarded.

Similar Messages

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

I open my work Lotus Notes through FireFox. since the upgrade if my email has attached I can't find them. The attachment windows is there but nothing is in it.

Question
I open my work Lotus Notes through FireFox. since the upgrade if my email has attached I can't find them. The attachment windows is there but nothing is in it.

you haven't lost anything, it's virtually impossible to delete your Zotero library by accident.
You may just need to show your add-on bar (View --> Toolbars ---> Add on Bar).
To check if Zotero is disabled, go to Tools--> Add-ons --> Extensions.
Make sure to check for Zotero updates, you may need the newest version (2.1.10) for FF6 compatibility.
As a general piece of advice, if technical problems make you frantic, don't perform major software upgrades in the middle of a project. Also, support for Zotero is better on the Zotero forums than here.

Send an email to lotus notes through SAP

Hi All,
I want to send a mail from SAP to the lotus notes.
What are the different methods available.
Can I do it without any middleware like (LEI) and Lotus Connector?
Thanks in Advance.
Regards
Satish.
Regards
Satish.

Hi All,
I am working on 4.7 and release 6.4.
The configuration settings in SCOT transaction has been done and all the pre requisite settings have been di=one.
But when I am trying send a short message it is giving an error.
The error that I am getting is
Internal error: SO_OBJECT_MIME_GET Exception: 2.
Please let me know how to go ahead and remove this error.
Thanks in advance.
Regards
Satish.

I cannot open my LOTUS notes through my work email as I used to in the past since I upgraded my Firefox.

I am a high school teacher. My school email is accessed through the District's site under I-notes. I can open I-notes, there is a tool/task bar. My inbox opens, however, none of my emails show up. This has been the case since I downloaded the newest version of FireFox. Can you help?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I get my phone calls to be displayed in my notification bar , my apps and my messages get displayed but not my phone calls I don't know what to do

All of my other apps show up in my drop box but when it comes to my phone calls nothing happens I have been searching and searching for an answer but I can't find one , I just want my phone calls to show up in drop box , please I need some help !!

Did you try resetting the phone? hold power and home buttons
till the silver apple shows up about 15 to 20 seconds.

Lotus Notes and SAP Business Workflow

Hi Experts!
If you have an experience or if you have SPECIFIC notes on Lotus Notes/SAP Workflow integration, please share some views on these following questions:
1. The SAP version we are using is ECC6. The client wants to upgrade their Lotus Notes client to V7.0.1 which caters Workflow integration. Do we need to have the Lotus Connector for this? (Workitem should be processed using the Lotus Notes client and there is a link where the apporover can process the workitem.)
2. What are the essential technical specifications for this this integration?
 a. Domino Server Platform
 b. Client Platform
 c. Domino Release
 d. Lotus Notes Client version
 e. Product/connector for the link.
3. What should I use for configuring the notification scenario?
 a. Extended Notifications
 b. RSWUWFML2
 c. SWN_SELSEN
Please provide answers on these.
Thank you very much. I'm generous in giving points.
Regards,
Reymar

Hi Akshay!
Am I right to affirm that according to what you've said, there is no Lotus Notes Connector needed for Lotus Notes and SAP Workflow integration?
I actually haven't tested yet the Extended Notification, but from your reply, I think you are confident enough to tell me that it is possible to have a link in the Lotus Notes mail and then this link could bring you to the Document and process it using,of course, the Extended Notification.
I'm very thankful. Have a nice day. And also, please share some notes on how too use the Extended Notification. (--,)
Best Regards,
Reymar

Adobe/MS Access/Lotus Notes Integration

Not sure if I'm in the right place, please feel free to let me know if not. Have searched in Access and Lotus Notes forums but no answers yet. I am using MS Access to automatically send email from Lotus Notes and attach a PDF file that is located on the server. Next step is I would like to be able to create a PDF portfolio out of that sent email and save/name it according to key data in the record. Am also using batch file to create the network folder but am hoping to be able to merge all these processes into one so that when the email is sent, the folder will be created and the PDF portfolio created from the sent email. So far, have not been able to find any answers, am hoping at a minimum someone might be able to point me in the right direction.
Am using this method to batch create folders based on new records in the Access database:
http://www.0092ff.com/tips-tricks/create-folders-from-an-excel-sheet
Here is the code I'm using to create the email - anyone know of any way to take that email that just got sent in Lotus Notes and create a PDF Binder/Portfolio? Thank you so much!
Private Sub cmdSendEmail_Click()
SendPrequal
MsgBox "Prequal Request Complete!"
Me.Requery
End Sub
Sub SendPrequal()
Dim oEmail As clsEmailMessage
Dim strSubject As String, strAttach As String, strAttachIns As String, strBody As String, strSave As String, strMsg As String, Saveit As Boolean
Dim rtItem As Object
Dim rtStyle As Object
Dim sFormattedText As String
If Me.MsgFreeFlow.Value = "" Then
Else
strFF = Me.MsgFreeFlow.Value & vbCrLf & vbCrLf
End If
sFormattedText = strFF
strSubject = "Information Request for " & StripString([RQContractor])
strAttach = "d:\MyDocs\Forms\pdf\FormName.pdf"
strMsg = "Message Here" & vbNullString & vbCrLf & vbCrLf
strBody = strMsg
If Me.PF.Value = 0 Then
strAttachIns = "d:\MyDocs\MyAttach_a.pdf"
Else
strAttachIns = ":\MyDocs\MyAttach_b.pdf"
End If
Set oEmail = New clsEmailMessage
oEmail.AddRecipient Me.ContractorEmail, recipTo
oEmail.AddAttachment strAttach
Select Case Me.frmINS
Case -1
oEmail.AddAttachment strAttachIns
Case 0
End Select
oEmail.SendEmail strSubject, strMsg, False
'doc.ReturnReceipt = "1"
'save draft
'Saveit = True
Set oEmail = Nothing
End Sub
clsEmailMessage Module:
'**************************CLASS CODE **************
Option Compare Database
Option Explicit
'creates and sends email using lotus notes.
'does not require notes to be running (it will start a session if needed).
'does not require references in the project
'uses OLE not com, so objects are declared as simple objects
'the declares below are for using COM, but this may require some
'additional configuration to work.
'Dim mobjNotesDB As NotesDatabase
'Dim mobjNotesMessage As NotesDocument
'Dim mobjNotesRTItem As NotesRichTextItem
'Dim mobjNotesSession As notessession
Dim mobjNotesSession As Object 'lotus notes session
Dim mobjNotesMessage As Object 'a notesdocument object (the email message)
Dim mobjNotesDB As Object 'a notes db object
Dim mobjNotesRTItem As Object 'a notes tich text object
'notes constant for attaching file
Const EMBED_ATTACHMENT = 1454
Public Enum RecipTypes
recipTo = 1
recipCc = 2
End Enum
Private Sub Class_Initialize()
Set mobjNotesSession = CreateObject("Notes.Notessession")
Set mobjNotesDB = mobjNotesSession.GetDatabase("", "")
Call mobjNotesDB.OPENMAIL
' make new mail message
Set mobjNotesMessage = mobjNotesDB.CreateDocument
'create the body
Set mobjNotesRTItem = mobjNotesMessage.CreateRichTextItem("Body")
End Sub
Private Sub Class_Terminate()
Set mobjNotesSession = Nothing
Set mobjNotesMessage = Nothing
Set mobjNotesDB = Nothing
Set mobjNotesRTItem = Nothing
End Sub
Public Sub AddRecipient(strName As String, intType As RecipTypes)
Dim intNextSemiColon As Integer
Dim intLastSemiColon As Integer
Dim strOneAddress As String
Dim j As Integer
Dim blnLastAddress As Boolean
'If the passed contact has a semi-colon, split into multipe contacts
If InStr(1, strName, ";") > 0 Then
intLastSemiColon = 1
intNextSemiColon = 0
blnLastAddress = False
For j = 1 To Len(strName)
intNextSemiColon = InStr(intLastSemiColon, strName, ";")
If intNextSemiColon = 0 Then
blnLastAddress = True
strOneAddress = Mid(strName, intLastSemiColon, Len(strName))
Else
strOneAddress = Mid(strName, intLastSemiColon, intNextSemiColon - 1)
intLastSemiColon = intNextSemiColon + 1
End If
If intType = recipTo Then
If mobjNotesMessage.HasItem("SendTo") Then
Call mobjNotesMessage.AppendItemValue("Sendto", strOneAddress)
Else
Call mobjNotesMessage.ReplaceItemValue("Sendto", strOneAddress)
End If
ElseIf intType = recipCc Then
If mobjNotesMessage.HasItem("Copyto") Then
Call mobjNotesMessage.AppendItemValue("Copyto", strOneAddress)
Else
Call mobjNotesMessage.ReplaceItemValue("Copyto", strOneAddress)
End If
End If
If blnLastAddress = True Then Exit For
Next j
'Otherwise, just add one name
Else
If intType = recipTo Then
If mobjNotesMessage.HasItem("SendTo") Then
Call mobjNotesMessage.AppendItemValue("Sendto", strName)
Else
Call mobjNotesMessage.ReplaceItemValue("Sendto", strName)
End If
ElseIf intType = recipCc Then
If mobjNotesMessage.HasItem("Copyto") Then
Call mobjNotesMessage.AppendItemValue("Copyto", strName)
Else
Call mobjNotesMessage.ReplaceItemValue("Copyto", strName)
End If
End If
End If
End Sub
Public Sub AddAttachment(strFilePath As String, Optional vName As Variant)
Dim strName As String
If IsNull(vName) Or IsMissing(vName) Then
strName = strFilePath
Else
strName = vName & ""
End If
mobjNotesRTItem.EMBEDOBJECT EMBED_ATTACHMENT, "", strFilePath, strName
End Sub
Public Sub SendEmail(strSubject As String, strText As String, blnPreview As Boolean)
Call mobjNotesMessage.ReplaceItemValue("Subject", strSubject)
Call mobjNotesRTItem.AddNewLine(2)
Call mobjNotesRTItem.AppendText(strText)
mobjNotesMessage.SAVEMESSAGEONSEND = True
If blnPreview = False Then
Call mobjNotesMessage.Send(False)
Else
Call mobjNotesMessage.Save(True, False)
End If
End Sub
'***************END CLASS CODE ***************************

Found this link, http://forums.adobe.com/thread/797809?tstart=-1, that states:
Acrobat 9 and later supports creation of a PDF Portfolio (the newer form of packages) via JavaScript, which can be called from VBA using the JSObject bridge.
Have been looking along those lines, but not sure what I'm looking for, if there is a way to create the PDF portfolio using code, I would greatly appreciate any information, thank you.

Trouble with Acrobat 9 Pro and Lotus Notes

Hi folks,
I have an client, running Windows 7 Pro with M$ Office 2007 Pro, Lotus Notes 9 and Adobe Acrobat 9 Pro.
My problem is, that I am not able to initiate an e-mail-based review.
I can't choose an adressbook, it always says that there is no connection to the e-mail-program.
Also if I enter an valid e-mail-adress this message appears.
Lotus Notes 9 is set as the standard mail program in windows.
I hope, you can understand my problem and you can help me.
Cheers
Christian

Hi Christian,
Please set Outlook as default mail client and see if review can be initiated successfully or not.
Also note that, Lotus notes 9 is not officially supported with Acrobat 9.
Regards,
Priyanka

Sync calendar w/ Lotus Notes?

At work I have to use Lotus Notes. I have installed HTC Sync but the only option to sync is w/ Outlook. How can I sync it with Lotus Notes 8.5.1?

Are you using Lotus notes through an exchange account?
Check out Lotus Notes Traveler app for Android on the Lotus Notes website.

Mighty Mouse Will Not Function in Firefox / Lotus Notes

I am accessing Lotus Notes through Domino Web Access Release 6.5.6. This is my only choice to get into work email. I am using the latest version of Firefox. I have the mouse set up with primary button on the left and secondary button on the right to imitate right click. It works everywhere else but I can not get an email to open by highlighting and clicking or double clicking left, right or center. However it does recognize my clicking on the menu tabs so that if I click "reply" or "forward" it calls up the email as to reply or forward. I can read it at that point, but pretty frustrating. There is no "open" tab on the Notes menu. I also tried Universal Access in system preferences to turn on the keyboard to act a mouse where "5" is enter, that did not work either. Anyone have any ideas? Appreciate it : )

Hi Stephen
Not sure I understand your problem but perhaps there is something in my recent post that will help. First I would replace the Targus with the D-Link adaptor. I learned about D-Link from others in the forum who said it was essential.
Here is the link to my post
Hope this helps
http://discussions.apple.com/thread.jspa?threadID=2246392&tstart=30
Mcthomas

ADF FACES af:messages only display 1 message

Hi,
I'm using the af:messages tag to display warning or error message.
The problem, is that when I put multiple warning messages in the FacesContext, only one of them is displayed in the message box.
FacesMessage warning= new FacesMessage(FacesMessage.SEVERITY_WARN, "This is a warning!", "Beware!!!");
FacesContext.getCurrentInstance().addMessage(null, warning);
warning= new FacesMessage(FacesMessage.SEVERITY_WARN, "This is another warning!", "Beware even more!!!");
FacesContext.getCurrentInstance().addMessage(null, warning);In my JSP, I use the <af:messages /> tag without any attributes.
In this case, only the "This is another warning!" message is displayed.
Note that if I have multiple error messages, it behave the same.
I've tried to look in the decompiled code of the renderer (and laf) but I was not able to find out where it retrieve the messages from the FacesContext.
Using <h:messages layout="table"/> instead of <af:messages /> display the two messages.
This is with EA9... I did not had a chance to test it with a more recent release of ADF.
Is this something that is already fixed (if so in which EA) or a known issue?
Thank's!

This has been fixed since EA9. It really is time to upgrade!

Send email to lotus notes

Dear All,
First of all I don't know if this is the correct forum but I have not seen a specific forum for oracle 8 so I posted the message in this forum.
I have stored into a table Lotus Notes address and messages.
I want to schedule a job on Oracle Server that send messages to a Lotus Notes Server.
Lotus Notes version is 4.6.x and Oracle database is 8.0.5 EE.
Any suggestion are welcome.
Bye

Hi,
If you want to be able to send email to the distribution list in Lotus Notes from SharePoint, you
can set the SMTP service address of Lotus Notes server in Central Administration->System Settings->Configure Outgoing email settings->Outbound SMTP Server.
And you need to set the Lotus Notes to accept anonymous email.
Here are some similar threads for you to take a look:
https://social.technet.microsoft.com/Forums/office/en-US/4f40f6de-7c1e-4543-9e48-2058a95ce468/email-setting-configuration-for-domino-server-85?forum=sharepointgeneralprevious
https://social.technet.microsoft.com/Forums/en-US/04bf7b7a-8797-4e46-b3ca-bddbe5d6d9ba/sharepoint-foundation-lotus-notes-connector-for-outgoing-smtp-mails-?forum=sharepointgeneralprevious
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

View is not retuning data when creating XML message through workflow

Hi All,
This is a very critical problem for me. I am trying to send an XML message (outbound) through XML gateway. This is done from a custom workflow. The message creation is done from the standard procedure ecx_document.sendDirect. The data for the XML file is taken from two views (whcih are created in a custom schema and have synonym in apps). One view for header and another one for line information (I am creating an XML for a purchase order).
The problem is when the workflow try the first time to create a message, the views are not returning data. So message creation fails. Now, if we restart the workflow after some time, it will work and the message is created. What could be the reason for this sort of a behaviour ?
I am using business events to trigger the workflow. The data in the table/view will be updated by standard POAPPRV workflow activities. The custom workflow is subscribed to a business event raised from POAPPRV workflow, at a certain point. So this will execute when this event is raised from POAPPRV wf. The subscription has a phase value of 99.
Any help on this regard will be much appreciated, as this is a critical issue.
Thanks in advance,
Arun
PS : One more thing : this is happening mostly in the production instance where the number of messages is very high (freqency).

Hello,
With the BAPI_EQUI_CREATE you can only create PM equipments not IS-U devices that why there is no IS Tab .
You have to use the dialog transactions IQ01, IQ04 or the MM transaction, where you can create devices through a movement.
There is objecttype DEVICE (SWO1) with the following methods:
-> Device.CreateFromData (Create Equipment Master Record)
-> Device.Create (Create Equipment Master Record)
-> Device.CreateISU (Create IS-U: Modification for IS-U)
Please check whether you can use method Device.CreateISU for your requirement.
Regards
Olivia

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Automatic message to display lotus-notes through workflow

Similar Messages

Maybe you are looking for