Automatic MIDI track record engaging.. is there a way to toggle?

I'm talking about how a midi track goes into record once its selected and it receives midi info.
Is there a way of turning this 'feature' off?? I would like total control over whether or not I'm going into record... There's a keystroke I don't mind making.

If you put the arpeggiator between the keyboard (Input Notes object) and the Sequencer Input on the Clicks and Ports layer of the environment it will record when you put your software instrument track into record.

Similar Messages

  • I accidently reverted a track to saved, is there any way to recover the recording?

    i accidently reverted a track to saved, is there any way to recover the recording?

    Do you mean, you reverted your project to saved? If you are lucky, the recording still might be in the project package ( if you copied a region of your recording to another track).
    Open the project package in the Finder by ctrl-clicking the project and look at the recordings in the subfolder "Media".
    If there is a more recent Time Machine Backup of your project, enter Time Machine, locate the version that may contain your recording and copy the Media folder to the Desktop or any place you like and then reimport the missing track to your project.

  • TS3479 I can't use air play mirroring because my mac 21.5-inch is a  Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

    I can't use air play mirroring with the new upgrade on my imac (mountain lion) because my mac 21.5-inch is a  Mid 2010... is there any way I can full fill the requirements and be able to use it? an upgrade or something??

    Welcome to Apple Support Communities
    http://www.airparrot.com

  • I can't use air play mirroring because my mac 21.5-inch is a  Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

    I can't use air play mirroring because my mac 21.5-inch is a  Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

    No. There is a 3rd party software, Airparrot.

  • Is there a way to toggle between open sequences? Keyboard Shortcut?

    So I usually work form one sequence of selects, and then take pieces of those selects on the source monitor side and edit them into the edit sequence on the program monitor side.
    1. Is there a way to toggle between the two?
    2. Is there a way to toggle between sequences that are open?
    Although it is really nice now you can load sequences into the source monitor it would be nice to toggle to that sequence to actaully see the clips in the source monitor sequence, not just have the visuals.
    On a basic level I'd like to know if there is a way to toggle between open sequences that way i can select in and outs lift and undo (which copies to clipboard) and then toggle to the second sequence i have and paste it in the correct place.

    Short answer: Yes. Try Shift+3. It's the default Shortcut for "Timelines".

  • Is there any way to toggle between languages in 10.5.8?

    I write emails in Japanese {Hiragana and Kanji) a lot but I need to frequently transfer between English and Japanese for that.
    On an older OSX version there used to be a way to toggle between selected languages using the space bar and another key (I think it was the Apple key) but that doesn't work in 10.5.8.
    Is there another way to toggle selected languages in 10.5.8?

    Someone (called rick) made a video tip on this.
    http://www.tiptrickmod.com/mac/how-to-switch-between-languages/

  • Is there a way to toggle to a web browser while in Keynote presenter view?

    I teach at a number of research classes at a University and I prefer to use Keynote as a teaching tool. My teaching requires that I access websites regularly throughout the the class.
    Here is what I'm currently doing:
    1. Before the class starts, I open each website we'll be using during the class as window and assign the window to it's own desktop. So if I have four websites the students will be accessing during class, I'll assign those four websites to four distinct Mission Control desktops (I'm using the 10.8.4 OS X).
    2. I run my presentiation from Keynote using the play key, but without access presentation mode.
    3. When I need to access a website while teaching, I [ALT]-[TAB] out of Keynote, select the appropriate page from Mission Control, and demo that page.
    4. When I'm done, I simply click the Keynote icon in the dock and resume my presentation.
    This system works and I have no real complaints with it - except that I cannot take advantage of Keynote's presentation tools. I've tried any number of ways to toggle to a web browser while in presention mode without success. While in presentation mode, if I [ALT]-[TAB] out of the presentation, it simply stops the presentation and the web page doesn't appear on the projection display (because I'm not mirroring my displays) and the only way to get it to work is to re-mirror my displays.
    I tried using the X command in Keynote, which is the toggle between displays, but no matter what I did, I cannot get the webpage to show up on the projection display.
    Is there an easier way to do this? Bear in mind, I'm not merely showing webpages, but I'm actually interacting with them (performing research on these pages) so they have to be operational. Right now I'm assuming presentation mode is just not going to work for this kind of scenario.
    Thanks for any suggestions.

    place as many shapes as you need on a slide and create a hyperlinks to your website
    Keynote preferences > slide show;    select  >  allow Expose and others to use screen
    select the shape and in Inspector > Hyperlink; select the enable as hyperlink box, then type in the address
    use alt > tab to go back to Keynote
    before playing Keynote, open and move the web browser on to the projector screen to position it ready for use

  • I do a radio show, when I pre-record i get a very low end hiss, almost sounds like gain is too high, but its not. If Im live to the station its fine. It only happens when I record. Is there a way to set audition NOT to record that low end sound?

    I use an Allen & Heath broadcast board. When I record to my computer for later broadcast there is a low end hiss/hum barely noticeable when im speaking BUT very prominent when there is a quiet moment.
    Sounds like gain may be tooo high, BUT its not.  When I do a LIVE broadcast using same equipment all is fine!
    Thoughts

    Well, several thoughts here...
    First, what are you using to get from the A&H mixer into your computer and is it in the chain when you broadcast live?  I ask because a lot of built in sound cards are pretty noisy and that could be the source of the problem, fixable with even a very cheap external USB interface
    Second, if the hiss actually starts at the mic/mixer, I know the A&H XB series has a high pass filter on every mic channel.  Have you engaged that?
    That said, it's pretty rare for hiss to be such a low frequency that the high pass filter will kill it.  You may get on better with the Noise Reduction feature in Audition, applied after the recording.
    Anyhow, to repeat how I started, what's your signal chain when recording and how does it differ from when you go live?

  • Ever since I downloaded IOS 7 my car stereo does not display artist, track etc. Is there a way to fix this?

    After I Downloaded IOS 7 when I play my music on my car stereo it no longer displays the artist name and track. Is there a fix for this issue?

    Try closing the Scrabble app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Scrabble app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Scrabble app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If neither of the above fix it then you could try deleting it and re-sync or re-download it via the Purchased tab.

  • I received a Facebook gift card but when I try to purchase things from my games I'm automatically sent to iTunes. Is there a way to go to the Facebook gift card instead of iTunes?

    I Received a Facebook gift card but when I try to use it to make purchases I'm immediately sent to iTunes. Does anyone know how I can by pass iTunes and use the Facebook card?

    per facebook how to redeem your gift card https://www.facebook.com/help/210241279016563

  • Stacks: is there a way to toggle stacks on/off in a project?

    I am uploading photos to MobileMe gallery albums, direct from projects, wanting to include all photos in each project. However, there are stacks in most of them, and no way I can find to upload anything but unstacked photos and stack picks. I'd be happy to switch off stacks, make the new album and switch on again. Is there anyway to do that? Or to tag photos as stack picks even when they're not stacked?
    Many thanks, Richard

    Instead of turning it off in a meeting.  Use the side control and put the phone on silent/vibrate, then flip the switch back to ringer after your done with the meeting.

  • Adobe flash player continually slows down the loading of pages on firefox. Is there a way to toggle the Flash plud in on and off instead of it always trying to load?

    slows down or stops browser. what to be able to turn it off and on
    and not have it always on when browsing, only when needed.

    Yep, you turn of Flash in a better way. Install FlashBlock, an extension from here-
    (https://addons.mozilla.org/en-US/firefox/addon/flashblock/)
    This would block Firefox from automatically downloading Flash content. If you wish to view the video, simply click on the Placeholder for that video. Simple!!!

  • I setup messaging on my verizon, however I have multiple lines on the account and it is showing messaging only for one phone line. Is there a way to toggle between multiple lines on the myverizon site?

    How do I toggle between multiple phone lines while on the myverizon website in regards to messaging?

    The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups.  Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

  • Is there a way to make it automatically set the ouputs of new tracks to Bus 5? (or something other than Stereo Out?)

    When I add a new track, it is automatically set to Stereo Out, is there a way to make it automatically set to Bus 5?  I use a mix that sends everything through busses and every time I add a track it seems I have to adjust this.
    Thanks

    ...and/or setup one or more tracks the way you want.. and then create/save a template and load that when you want to start a new project...
    You can even have Logic (via it's Startup preferences) autoload that template every time you start a new project... by choosing your template as the default one.
    See this page in the User Guide for more info

  • Is there a way to interpet the chords on a track that's already recorded?

    Hi,
    I know that in the Midi monitor when you play a chord on your keyboard it'll show you the chord name. But, I would like to be able to see the chord name once the part is already recorded. Is there any way to do this? Or is there a way to select the notes in one of the windows and let it interpet the chord (like in Cubase)? I don't see it in the manual.
    Thanks

    If you're in express a poor man's way to do it is to add a tuner to your channel strip and just look to see what the base of the chord being played is. From there you can extrapolate the rest of it. Silly, but it does work

Maybe you are looking for

  • Can't get into IPad 2 after latest update.  HELP, PLEASE!??

    I made the mistake of updating my IPad 2 to the latest IOS7.  Now I cannot get into it.  When I turn it on, it says 'hello' and to swipe to set up the new update.  Sometimes the swipe brings up a new screen; sometimes it just scrolls through several

  • When will Camera Raw support be available for the Olypus OM-D E-M5

    I have just purchased the above Camera but Lightroom is not able to laod the raw files it generates.  Does anyone know when support for the camera will be available in Camera RAW?

  • Runtime error Object Required - Captivate 5

    Hi, Wondering if anyone else has come across this problem and found any solution. I have created .swf using Captivate 5 and when I upload them to our learning environment (Learning Pool), the flash plays through to the end fine but clicking on next/m

  • Link Saleorder and Purchase order

    Here my client is doing jobwork customer will send material(cloth), after few days he will be giving the design. which is to be printed on the cloth. My client will take the design(in paper or in some cloth)  and they give it to subcontracting. For s

  • How to apply same speed rate to several clips?

    Hi, Say I have 10 clips on a timeline, how I can change their speed to 70% or 43% or whatever, but all together? Thank you -T