Automatic monitoring of operational communication channels

Hi,
Can anyone tell me if there is a possibillity to automatically monitor the runtime status of the operational communication channels?
For instance the forwarding of the messages from (RWB > Component Monitoring>adapter monitoring-->adaptertype) to CCMS or picking up these logs with the alert framework.
Manual monitoring is not an option because the number of systems to be monitored is to big, so an "monitoring robot" has to be created for this specific area. Most of the other area's are already covered by alert framework and CCMS.
I hope someone has experience on this.
Kind regards,
Ramon Boekel

Hi Ramon,
Please have a look at this.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
cheers,
Prashanth

Similar Messages

  • Monitoring receiver idoc communication channel

    Hi All
    I have an idoc to idoc scenario.
    I am unable to see my receiving idoc communication channel in communication channel monitoring of RWB. It is not available in the dropdown list.
    I want to have a look at the audit log to see if the idoc is delivered to the receiving system.
    How can i monitor receiver idoc communication channel?
    How can i ensure that the idoc is delivered to the receiving system?
    In sxmb_moni, status is checkered flag.
    Many Thanks
    Chandra Sekhar

    Hi,
    IDOC is on ABAP stack hence u can not monitor IDOC.
    For testing purpose
    1) GO to SXMB_MONI check the status of message.
    2) Go to R3 and enter Tcode WE02 and check the IDOC which is send from XI. enter the idoc name and see the status of IDOC it should be in green status if it is posted successful or else see the status record for checking the error message.
    chirag

  • How Do We Monitor HTTP Receiver Communication Channel

    Hi Exports,
    How do we monitor the HTTP Receiver communication channel. Could you please share your ideas.
    I am able to send the message to http to third party system. i want to monitor all messages which it's goes to third party system. Same like if you go to component monitoring we have communication channel monitoring over there we can do monitoring by adapter but when we choose http communication channel there is 0 messages.
    Please provide monitoring thing those messages which is goes to third party system.
    Advance thanks
    Regards
    Ramidi S

    There isnt any transaction to directly monitor the HTTP adapter. However u may do the following:
    1. To test the HTTP adapter you can just test the adapter_plain service in TCODE SICF.
    2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
    3. You can go to SM59 to see whether the HTTP connections between XI and R/3 are up and running
    Regards,
    Prateek

  • Channels not monitorable in the Communication Channel Monitor / RWB

    Hi,
    Back on XI after a long break… ☺
    I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
        Status: NA
        Short Log: No adapter registered for this channel
    The adapter is deployed and the integration scenarios using it work perfectly:
      - sda package deployed through the SDM
      - the metadata defined in the Design
      - a valid and working configuration involving the scenario is defined
    The messages are going through and are monitorable in both SXMB_MONI and RWB...
    All other channels using system adapters (File, RFC, SOAP…) do display a status (as a color icon) and a Short Log… and they can be administered (start/stop) using the enabled buttons when selected…
    From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
    I have no idea what could be the issue… should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
    I saw 2 posts with this error message but they did not help me to figure out where the issue is …
    Thanks for your help,
    Adalbert
    Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

    Hi Gouri,
    Thanks for your response, I will try would suggestion for testing... but
    I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
    It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
    I did not see anything in the Adapter Development guides related to this kind of constraints...
    Thanks,
    Adalbert

  • Communication Channel Monitoring not showing up Communication  Channels

    Hi All,
    PI 7.1 : I  have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
    And in ID I am getting below warning message for that Communication Channel.
    Message:  Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for  Adapter Engine is missing in SLD.
    Any idea? I appreciate your  quick help.
    Thanks,
    Carl

    Hi Abhishek,
    I have selected inID ,  File dapater software component  SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
    Thanks,
    Carl

  • Problem in Communication channel monitoring..

    Dear friends,
    I am facing a problem in Communication channel monitoring.
    Problem:
    I have designed several communication channels in the Integration directory.
    To check the status of channel i will go to RWB->Component Monitoring->Adapter Engine->Communication channel monitoring, then we have a selection screen to filter out the channel, adapter,etc..
    Here i am NOT seen any channels to filter out. I.e. Channels in the Integration directory are not reflecting here.
    Can you please help out on this?

    HI,
    Do the CPACache refresh .
    ALso check this SAP Note- 937382
    Regards,
    Moorthy

  • Communication channels not shown in adapter monitoring

    Hello everybody,
    we got several communication channels running on the same file-adapter.
    But in adapter monitoring only ONE communication channels is shown.
    The other communication channels are not shown although we expected them at least with an error.
    Any ideas?
    Thanks a lot
    Regards Mario

    Hi,
    I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
    Following will be looked once you don't have any adapters are visible..
    Check SAP BASIS Content is imported in the IR or not.
    Check this thread also-
    Problems in adapter monitoring
    Regards,
    Moorthy
    Message was edited by: Krishna Moorthy P
    Message was edited by: Krishna Moorthy P

  • Communication channel monitoring (adapter engine) in ccms (rz20) available?

    Hi,
    we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
    There sometimes errors disappear. At the moment these errors accumulate!
    Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
    So we don't look all the time in the communication channel monitoring!
    Have anybody an idea?
    Regards,
    matthias isenburg

    Have u seen the discussion
    Re: How do I configure an auto-email alert for Adapter engine errors
    Regards,
    Prateek

  • Sender Soap Adapter communication channel  error

    Dear Experts,
    When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
    "Processing Errors in the Last 50 Minutes"
    Thanx in advance

    Aamir,
    My other interface is working fine by giving the following url:
    http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
    I am not using the propsed url.
    Moreover when  i try to give this url in the browser . It is asking of user id and password.
    I am  giving user as : PIAPPLUSER.It gives message servelet is ok.
    In my communication channel monitoring the corresponsing communication channel:
    RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
    Error meesage in Webclient:
      java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

  • Communication Channel Inactive but Still processess the file

    hi all -
    New PI 7.0 installation. Going through lot of issues.
    XI, CRM and other systems reside on the same server. SLD resides on the same server but different SID.
    I had made some changes to the communication channel - made it active, inactive, changed the polling interval.
    Nothing is getting reflected on the RWB -> Component Monitoring -> Adapter Engine -> Communication Channel Monitoring -> Processes the scenario and none of the changes in the Integration Directory gets reflected in the RWB.
    1. Did SXI_CACHE, Delta Cache Refresh, Complete Cache Refresh. Still processes the inactive communication channel.
    2. Did CPA_Cache refresh. Still processes the inactive communication channel.
    3. Checked the business system -> url for the IS and it works fine.
    4. Cleared the SLD Data Cache from the Integration Directory.
    Any other ideas what could be wrong?
    Thanks,
    Tirumal

    Hi,
    Check  it..
    >>>>I had made some changes to the communication channel - made it active, inactive, changed the polling interval.
    After the Changes  activate  your  changes.
    Regards
    Agasthuri Doss

  • Automatic monitoring of communication channels

    Hi Mighty Experts,
    Do any of you know if it is possible to setup automatic monitoring rules for the communication channels (CC)? Or do you have any tips on how to automatically to monitor the CCs?
    e.g if a CC is based on the file adapter and the directory is not present on the system the CC will fail but the ABAP message monitor show the message as successfully delivered. But in the Communication Channel Monitor you will see the error.
    /Jesper

    Hi,
    I am not sure of automatic monitoring. But you can always create Alerts to monitor at Adapter engine level.
    So, any kind of error occured in the CC's with respect to file not found or directory not found, will give you the message by email.
    Regards,
    Krish

  • Regarding Communication Channel Error in Component Monitoring(RWB) in Dev

    Hi,
    In my XI dev Server when I check Component monitoring....Adapter Engine and CC monitoring are showing errors ( showing red
    symbol)......
    I think my RFC to File Scenario cannot be executed  due to this.......I cant receive any messages in SXMB_MONI.....
    Please help me......
    Thanks,
    Sudheer

    Hi...
    Still I am not getting any messages in the MONI.....
    In communication Channel Monitoring it is showing green.......
    In Component Monitoring Integration Engine:XID showing red.....CCMS Status: showing red and Adapter Engine Showing red......
    Created RFC destination at ECC(of 'T' type) and gave ECC details....Then gave same details in Communication channel in XI.......
    I did not created RFC Destination at XI.......
    Should data to be passed to RFC or XI automatically pings the data......
    When ABAPer executed RFC Connection its successful...but when he executes Functional module i.e test it is showing 'SYSTEM_FAILURE'.....
    Thanks,
    Sudheer

  • Monitor communication channel error

    Hi Experts,
    I am doing a proxy to file scenario.
    In my scenario I have requirement that if there is a failure in placing the file in the target location then an alert has to be triggered.
    For testing this I have given dummy host in receiver file adapter (FTP) and activated it.
    When I triggered the interface, it still shows as successfully processed message in PI message monitoring, though the file is not placed in target location. I would expect that this should be shown as error. The error is shown only in the communication channel monitoring. So even the alert that I have configured do not work. Could you please provide some inputs on how to tackle this situation?
    Thanks and regards,
    Prasad

    Hi Prasad,
                      Gneral flow will be like this
    Sender AdapterEngine --> Integration Engine -->Receiver Adapter Engine
    As your message failed at third step i.e at receiver adapter engine ...it will not shown an error in integration engine(SXMB_MONI) as the message is successfully passed to adapter engine from integraiton engine...
    By default if message fails at adapter engine it will retires 3 times after period of 5 minutes...automatically
    And finally if all retries fails then message status will be set to failed and an alert will be triggered when the manual intervention is required to analyse the problem..
    If you feels that the error is resolved and needs to resend the message again which can be done from MessagingSystem of the adapter*http://host:port/MessagingSystem/)
    Hope this clears you
    Rajesh

  • Automating Communication channel and message monitoring

    Hi,
    Right now i am trying to automate communication channel monitoring and message monitoring for  SAP PI. Kingly suggest me how can I go ahead and which language I can use(java or dot net) ?. I will be needing to generate a report for every half an hour about the status of the communication channel and for successfull and failed messages. Kindly assist on what criteria I can use.
    Kindly help on this.
    Thanks and regards
    Nagaraj

    Hi
    As far as i know there is not easy way to acheive it by calling some webservice or chacking DB table. I developed some tool in .net by calling direct webpage using HTTPRequest class
    Regards
    Maciej

  • Advance selection for source file-Error in communication channel monitoring

    Hi all,
    Referring to the link below:
    <b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
    in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
    Plase note that  our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
    Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
    Thanks & Regards,
    Sudhir Tiwari

    Sudhir,
    In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
    By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
    In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
    Regards
    Bhavesh

Maybe you are looking for