Automatic Notificatoon Creation for each MIC when Rejected.

Dear Gurus,
When the MIC is rejected in Result Recording Screen, automatic notification is to be created.
For example out of 8 MIC, 4 MICs are rejected, 4 notification are to be generated automatically.
Another Requirement.
The notification is to be generated, for the Inspection LOT when MICs are rejected.
Please guide.
With Best Regards,
Raghu Sharma

Dear Sharma
I think there is no standard solution for this. you might have to some exits for the same.
Below given one possible solution . Please check this will do any help
As you know there is automatic defect recording available in MIC. Let whenever the MIC gets reject this automatic defect recording takes place. In standard once the defect recording is done automaticaly one notification is created for the inspection lot which gets closed on giving the UD. This notification will capture all the defects related to the MIC in the notification. You will have to create the individual notification for these defects using the exits
Regards
Gajesh

Similar Messages

Automatic TO creation for delivery

Dear Experts ,
We are facing a problem with Automatic TO creation for delivery only in some storage types ( not all the types , some types are working fine )
The problem happened after we applied a user exit for a specific picking strategy , but even after we have cancelled that user exit still problem remained.
We have checked the following settings, and everything seems fine:
1-Warehouse management - Activities u2013 transfers u2013 define Mvt type
2-Warehouse management u2013 interfaces- Automatic TO creation
Looking for your help in this issue
Thanks ,
Malik

Hi Malik,
You mentioned that you have previously implemented the picking user-exit and removed it later. Did you enter the correct picking strategy for the effected storage types after removing the user-exit? This could be one reason.
What happens when you try to create the TO manually?
Regards,
Osman

Automatic TO Creation for 321 movement (WM and QM integration)

Dear experts,
Can anybody guide for how to create auto transfer orders with reference to posting change number for 321 movement document?
Best Regards,
Anand Rao

This has to be done in WM. Activate the automatic TO creation for the releavnt Inventory/warehouse movement . Its under interafces - inventory management in the WM component in config.
Thanks,
Ram

Automatic TO Creation for QM Usage Decision

Dear Gurus
We all know WM TO to releasing stock from QI to UU or return goods to vendor can be created automatically,
My question is, when the usage decision is split into two, some material going into stock, and some returned to vendor. for return to vendor, SAP will do automatic transfer, but for material go into stock, SAP is not release Q status in WMS to unrestricted (blank), I have set the movement 321 to create TO automatically and post into same bin.
FYI, if the transaction is separated, SAP perform well (transfer Q to unrestricted done automatically and return to vendor also done automatically)
Is there any solution for this problem?
Thanks and Regards
CJ Lee

Hi,
In case of a usage decision for a partial quantity, it is not possible to create the TO for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest using a different stock posting. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online processing LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps.
Regards,
Sinéad Curran

Automatic Batch creation for a material.

Hi Friends,
we require automatic batch creation at the time of confirmation of process order for a particular material not for all the materials existing in the same plant and also not for all the materials existing in the same material type.
we have activated batch level at the material level,
Pl give some idea,
Regards
Sadan

Hi,
Batch is created automatically either when an order is created or released. (setting in OPKP)
I hope its not possible during confirmation.

Daily Automatic delivery creation for Finished Products

Dear All,
As per my client requirement, they need automatic delivery creation when ever the finished products posted(Reached) in to the Finished Products Storage location with out time specification.
Scenario is like this.
1.Scheduling agreement will be created for one month or one year for the specific customer with specific products.
2.After producing the material, from the production line finished products will taken in to the Finished product Storage location with some acknowledgement.
3.When ever the acknowledgement happen(stock get added) automatic delivery need to be created for that acknowledged quantity with reference the scheduling agreement.
4.There is no time specification When ever the finished products stock acknowledgement happen automatic delivery need to be created.
5.There is no quantity specification also what is the quantity at finished products Storage location acknowledged for that quantity automatic delivery need to be created .
6.If there is no production-->There is finished products -->No delivery should trigger.
This will be applicable to specific customer and specific material only.
Please give your valuable inputs as early as possible.
Regards,
Murali.

Dear Rohit,
1) Who creates the acknowledgement..
-->Finished Products Storage location people will run this entry when they recieve the finished product from the production line.
2) How frequently is this acknowledgement created..
-->When ever receives the finished products from the production line,
3) Is this acknowledgement a print out or a documetn type.
-->It is not a print or document type, it is just an Transfer posting entry to add the Finished products qty to the existing stock at that particular storage location.
4) If it is document type does it appear in document flow.
-->No it will not come in the document flow.
I hope it will clear for you,
Regards,
Murali.

How can I turn off an alert for each txt when message app is open?

I think this is a simple problem but I can't find a solution! I want to receive an alert (either vibration or sound, depending on the position of the silence switch) when I get a new txt. This is how I am set up now. However, once I open the messages app and am engaged in a discussion, I no longer want to receive an alert for each message. So basically: If message app is open, no alert... otherwise, alert! Is this possible?

Latest update on 'Network Lost' Message. I have tried all the suggestions, ie, Setting my carrier to Automatic and resetting my Network settings but nothing works. I had a long conversation with someone at Apple this morning and he said there was no way to stop this from happening. Gutted! My husband and I went through the settings on both our iPhones earlier and discovered that he has a different software version to mine, He hasn't updated his and he never gets the message. Now I am wondering if it's possible to go back to an earlier version and if so how? Can anyone tell me please?

Default email for each contact when emailing to a group?

Hi
When I use Mail.app's shortcut for sending email to a group, I don't seem to have control over which of several emails (work, home, etc.) that exists is being used for each contact.
I want to specify a default email for each contact so that I don't have to manually adjust each contact.
Is there any way to do this?
Thanks!

Make 2 contacts with an email address each rather than 1 contact with 2 addresses.

Bin determination in automatic TO creation for posting changes

Hello guys,
could someone provide some information or some links on how the automatic bin determination for posting changes will be processed in SAP WM?
Actually I'm looking for some further information for automated processing during a posting with movement type 309.
What data from the posting change will be taken into account for the automated bin determination?
Or is it 100 % comparable to the standard putaway / stock removal strategies?
Thanks for some hints on that.

Hi,
I would like to add a point here that there is possibility of transmitting a screen widow to hav the value of GR number. You can do the settings in OMLR in the AddlData for the appropriate Mvt (eg 321)
This will cause to have the GR number to the PCN, which is compared with the GR no in the quant existing, while creating the TO wrt PCN.
For eg: Material           Qty              Stk catgry                Bin                      GRno
                 A                  20                    Q                      B001                  5000000102
                 A                  40                    Q                      B003                  5000000140
Now, when transfering the stock category form Quality to unrestricted, for 20 qty, a PCN will be created bforethat a pop-up screen flows in which u'll b giving the GR no as 5000000140.
So u have the PCN for Qty 20, with GR no 5000000140.
When u create a TO wrt PCN, system will pick the stock from the bin B003.
I don't know how far this may light u.
Reg
Prasanna

Automatic TO Creation for Inventory loading

Hi ,
Is there any way to create Transfer Order for a material document with 561 movement type (With and without Handling Units ) ?
I believe system doesn't create any TR for intial inventory upload , is that also correct ?
Regards
Sandeep

Dear Sandeep,
You can configure to create the transfer requirement or transfer order creation for 561 movments also. under
customizing path: SPRO --> Logistics Execution --> Warehouse management --> Interfaces --> Inventory Management --> Define Movement Types
In case you want to do with HU management then there will be delivery gets created instead of material document.
so naturally you can putaway or pick using the delivery document.
Kind regards,
Ramana

Spool creation for each vendor/ payment document in program RFFOUS_C

Hi experts,
Requirement is to create spool for each vendor/payment document in RFFOUS_C.
What is presently happening is only one spool is created for all the payment document numbers.
I need to create separate spool for each cheque and remittance advice based on the payment document.
Ex:I have 2 vendors with one cheque and remittance advice each.The first cheque and remittance advice of vendor 1 should be created in spool 1 and the second cheque and remittance advice of vendor 2 should be created in spool 2.
Please suggest your inputs as to what needs to be changed in the program RFFOUS_C or do we need some configuration to achieve the same.
Regards,
Joby

HI,
Try to see if the check is register on FCHN transaction. So, you will be able to reprint the check using FHC7 transaction.
Let me know your comments
Daniel

Grab a list of the latest note for each job when/if they start with set text

How would I look only to the latest [01-JobComment].[Creation_Date] where [01-JobComment].[text] starts with the text "AB001:" for each [05-Job].[Job_ID]?
SELECT [05-Job].Job, [01-JobComment].[CREATION_DATE], Mid([01-JobComment].[TEXT],1,6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY, [01-JobComment].CREATED_BY, [05-Job].Status, [05-Job].Owner
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE ((([01-JobComment].[CREATION_DATE])>[05-Job].[AsBuiltProof]) AND ((Mid([01-JobComment].[TEXT],1,6))="AB001:"))
ORDER BY [01-JobComment].[CREATION_DATE];

I'm not sure this is what you want:
SELECT [05-Job].Job, (SELECT Max(T.CREATION_DATE) FROM [01-JobComment] AS T WHERE T.JOB_ID=[01-JobComment].JOB_ID AND Left(T.[text],6)='AB001:') AS CreationDate, Left([01-JobComment].[TEXT],6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY,
[05-Job].Status
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE [01-JobComment].[CREATION_DATE]>[05-Job].[AsBuiltProof] AND Left([01-JobComment].[TEXT],6)="AB001:"
ORDER BY [01-JobComment].[CREATION_DATE];
Regards, Hans Vogelaar (http://www.eileenslounge.com)

I don't want 'Automatic audio fade' for each clip

hmm, well, I like it but some member at my German board noticed, that any new clip has its (short) audio-fade-in.
You can set to 'Manual/0 sec' ... but for each clip, not as a 'preset' for all.
any expert any idea, which internal plist to edit to set that 'fix' to a 0-sec-fade?
haven't found any ...

AppleMan1958 wrote:
but you could always COPY .. then PASTE ADJUSTMENTS/AUDIO ADJUSTMENTS.
that PASTE ADJUSTMENTS is one of the most under-estimated features of iM09 .. !
EXCELLENT advice, S.!

Automatic TO Creation for Inbound Deliveries

I would like to have TO created automatically for Inbound delivery for PO.
1) I have set the Automatic TO = A in Mvmt Type 101 for my warehouse in transaction OMKZ.
2) I have set Immediate TO Creation and Mail Control = A for Mvmt Type 101, Mvmt Indicator =B, Mvmt Type 101, TR Create =X for my warehouse in transaction OMKX
3) I have assigned Routine #32 to Application E1 in transaction VOFM
4) I have created output conditon WMTA for delivery type EL with Medium =8 and Date/Time =4.
Tranfer order is not created when the delivery is created via transaction VL34. The output determination analysis indicates that WMTA was ignored because requirement 032 not fulfilled. What am I missing?
Thank you.

Hi Julie Simonds
I believe you are working with Inbound delivery with Item catagory as ELN.
Please check if Relevant for putaway is checked.
Path for your refernce :
SPRO > LE > Shipping > Deliveries > Define Item catagory for deliveries.
Thanks,
Mahesh

Automatic PR creation for stock items (Category - L)

Hi All,
My requirement is as follows:
When I create PM orders for stock item, system generates a reservation number.
But the actual qty is sytem for such items are less than planned qty or NIL qty.
How to create PR's for such items automatically by system ?
Is MRP run required to be activated for such items (i.e: maintenance of MRP views in material master) or any other way to do it for stock items (L) ?
If so, what all fields need to be filled in material master?
Is there a way for doing MRP run only for material type ERSA (spare parts) or only against reservation numbers created through maintenance orders or against MRP controller?
Kindly post your valuable feedback.
Thanks in advance and best regards.
Kannan J

Hi,
For automatic p.o creation, you can use reorder point.
In material master mrp1 view, use mrp type VB, reorder level ex. 50 pc.
Maintain lot size HB, maintain max stock level 100 pc.
When the requirement comes it will consume from stock. If the stock goes below reorder ponit(50), it will create planning file entry.
When you run mrp (MD01), it will automatically create p.o.
But without running mrp, system can not create p.o
With that you can maintain your stock.
Hope it will help.
Regards,
Dharma

Automatic Notificatoon Creation for each MIC when Rejected.

Similar Messages

Maybe you are looking for