Automatic number range assignment for creation of material issue

Hi Experts,
I need to create material with automatic assignment of internal and external number range .
Already existing logic for one exit which is working fine in one system and I am using that same logic in other system
where it is not working and throuhging the following error:
"Internal number assignment is not possible for the material type Operating supplies"
Can you please suggest where i am dong wrong ?
Thank you in advance.

Hi,
Please slect material type operating supplies click on detaials. check the external number assignment w/o check checkbox
Regards
AKM

Similar Messages

OM- Number range assignment for Plan Version

Hi all,
What should be the entry in table T77S0 -
NUMRG COMP Number assignment for all plan versions.
Whether it should be set to 'X' or Blank?
I read the documentation but could not undestand properly.
Thanks.

Hi,
Suppose if the value of NUMRG COMP is space then assigned number range will be used across all plan version's for different OM objectts.
And if the value of NUMRG COMP is 'x', Then each plan version will have different set of object range.
This has to be specified in OONR transaction.
Thank & Best Regards,
IFF
Edited by: IFF on May 11, 2010 10:08 AM
Edited by: IFF on May 11, 2010 10:09 AM

Number Range Assignment for personel numbers

In my all three clients i am getting this strange behaviour that my system is skipping the perners ,even though my number range is internal and i have maintained all necessay entries , i find that my system is skipping perners randomly sometime q is skipped and sometimes even 90+ perners are deleted.
Please can anyone help me in this regard.?

First try to segregate your number ranges into three companies then maintain it atleast you identification of different personnels.
then if your doing batch loading of personnel thru BDC or lsMW the usual problem is with master data so it skip number ranges.
try to reset number ranges but before that delete your entries to pu00 tcode.
let see if this works..
Thanks
Toti

Post depreciation with external number range assignement

HI
When i am running Depreciation run AFAB, i am getting error"created doucment number range with internal assignement.
Currently the number range assigned for documents is external.
Why this error is coming... please provide solution without changing number range to internal..
Thanks and regards
Ramarao.p

HI
see the SAP document .....
Specify Document Type for Posting of Depreciation
In this processing step you determine the document type for each company code for posting depreciation.
Standard settings
SAP supplies document type AF for depreciation posting.
Requirements
You must have defined the document number ranges.
Activities
1. Check the standard document type AF. If needed, define your own document type.
2. Specify the document type for depreciation posting. The document type you select must meet the following conditions:
It must be a document type for batch input.
It must be defined with external document number assignment
So please provide the solution ...with out changing internal number range...
Thanks and regards
Ramarao.p

Automatic Number Range Determination in grouping by custom BP Roles

Hi,
I am not aware whether we can automate the grouping (Number assignment) while creating BP with different Roles ( Instead of asking user to choose the number range object while creation of BP with different roles)
Scene: BP Creation selection for "Prospect" always trigger "xy" object defined for specific number range( No Other Grouping Selection can be allowed).
I am looking for inbuilt functionality with in CRM 5.0...Please let me now ...
Points & Best wishes are always there...............Regards, Ashok

DearAshok
You can create number range and assign it BP group and only one can be made as standard or u can call it as defaulf no. but for different BP roles it does not follow R/3 procedure which flows from account group here we need to select manualy out of the list of grouping arrange the reason is
usually R/3 will be leading CRM so in R/3 we would have maintained internal no. range and here we need to maintain external no. range and there can be different ranges for different groups
for eg. in R/3 we maintain all the customer irresepective of person, sales org.,group as same customer master
but in CRm we maintain them according to Person , org. or group so here we are classifying the customers so if required we can use std. no. range or we can distingauish by no. for easy idenfication suppose if it si person it will start with 1000 & org with 2000 like that
this is as per my knowledge still not convinced mail me i will respond to u @ [email protected]

Number range Object for Production order Number range profile.

Hi ffriends,
 Can anybody tell me how to maintain the Serial Number Range for production order serial no.
 I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master but I don't know the number range object for that profile.
 Or can anybody tell me how we attach serail no profile to a serial no range object.?
 Please it is urgently required..........
Regards,
Rajesh Akarte

hi rajesh
in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the PPRL procedure is assinged,also check the serial no usage assigned
for detailed process have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm
regards
thyagarajan

Batch Numbers Skipping in Internal Number range Assignment

Dear Gurus,
We have Batch Management at Material Level. For a Material, we are facing an issue in Internal Batch Number Assignment. Systems Skipping 15-20 numbers buffer in Internal Number Assignment, we want it to be in a sequence. In OMAD for BATCH_CLT, No of Numbers in Buffer is 0.
Kindly guide me why the system is doing this.
Regards,
Johi Kapoor

No its not working. I want to set my batch number range from client level to material level. Kindly tel me how can i do that....?

Picking request Number Range Assignment

I am looking for picking request number range assignment?
In Logistics execution we can define the number range, for pciking request but where to assign it?
I request all the SD Guru's to have a look. I find it pretty challenging.
Please reply to the subject asked.
Best Regards,
Bashir
Edited by: Bashir on Jan 12, 2010 11:18 AM

Dear Friend
I feel the picking request number is automatically generated by the system ( If it is not a transfer order that is not warehouse managed )
The logic is system takes the picking date
Today if we pick that is 12.01.2010
The picking number is 20100112 (yyyy/mm/dd)
No matter how many delivery documents we create today the picking number will be 20100112
If the picking date is 11.01.2010 then
picking number is 20100111 (yyyy/mm/dd)
If the picking date is 21.12.2009 then
picking number is 20091221 (yyyy/mm/dd)
Regards
Raja

Maintain number range interval "" for inventory document --help!

Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

Excise invoice number range assignment

Dear SAP Gurus,
This is with regarding Excise invoice number range assignment (J_1IINTNUM, J_1IRG23A1, J_1IRG23A2)
For the financial period April 2011 to March 2012, following number ranges exist already in SNUM.
01---- 2011--5007393-5999999
01---20125016369-5999999
Till 31st March 2012, excise number ranges doesn't change. But for the next financial period from April 2012 to March 2013 there would be a new set of number ranges.
At the time of April 2012, I will have to change the number ranges as per the new financial period. In such a case, I would be unable to change the number ranges for the financial year 2012, as the system would throw an error as "Lower limit can only be changed during initial entry"
How to change the number range for the financial period April 2012 to March 2013, in this above scenario?
Also can you please guide me on how to map the number ranges so that from April 2012, the system would start taking the new number ranges instead from January?Thanking you in advance..
Regards,
Vijay N

Dear Mr. Lakshmipathi,
Thank you for your reply.
Currently, system consider the 1st one till December 2011 and for the upcoming months from Jan 2012 to March 2012, it takes second one. This is my problem here.
01---- 2011--5007393-5999999
01---20125016369-5999999
I want the system to consider the 1st one for the period from April 2011 to March 2012 and 2nd one for the period from April 2012 to March 2013. Right now, it takes for the period Jan 2011 to December 2011. Since Jan 2012 has been initiated, system is throwing an error stating to create number ranges for 2012, hence I have created the second one.
Thanking you in advance.
Regards,
Vijay N

Mass deletion of document number ranges intervals for several company codes

Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
Steven

Hi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards

Facing problem in Number Range Allocation for Objects in OM

Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
Tharak

Hi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu.

Error in number range assignment

Hi,
When I try creating a process order, I get the below error : ERROR OCCURED IN NUMBER ASSIGNMENT FOR OBJECT RESB. There is no problem with the number range, i.e. number ranges are assigned to the order type. Any solution?
Regards,
Sakthy

Hi,
check table NRIV object RESB (which number range assigned, whats the highest number assigned) and compare it with table RESB. If the highest number in RESB is higher than the status in NRIV you know the reason for the message.
best regards, Christian

External Number Range setting for Equipment Not working

As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara Rao

Hi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

Incorrect Number Range assignment

Hi all
I"ve created Credit memo for return order & i"m releasing it to accounting but it"s giving following error message:
Incorrect doc.no.: 313000118. Select document number between 0316000000 and 0318999999
Message no. F5151
Diagnosis
The document number you specified, "&v1", is not in the appropriate number range. The number range is dependent on the document type.
The exception to this rule is formed by recurring entry documents, which must use number range 'X1' and sample documents, which must use number range 'X2'.
Possible reasons for this error message are:
You have entered an incorrect document number.
An incorrect document number was transferred to this application during an update from another application (e.g. CO).
System Response
The document cannot be processed any further.
Procedure
Enter a document number that is within the specified number interval.
If this error was caused by an update from another application, check the type of number assignment in that application (external or internal?) as well as the document number transferred.
Example
In the CO settlement profile, a document type with external number assignment was entered, whereas an internal document number was transferred.
PS: I"VE MAINTAINED NUMBER RANGE FOR INVOICE TYPES AS SPECIFIED IN BBP FOR CREDIT MEMO.
CREDIT MEMO FOR RETURN ORDER IS REFERENCED WITH SALES ORDER NOT DELIVARY.
SUGGESTED NUMBER RANGE IN THE ERROR IS FOR DELIVARIES IN SPECIFIED GUIDELINES IN BLUEPRINT

Dear Mandhar,
Please check following settings at your end and update:
T. Code: VOFA
Select your Billing type and double-click. Now, check
Field: Document Type (TVFK-BLART). Check for the entry maintained (If nothing specified, RV is the default).
Then,
T. Code: OBA7
and check the Number Range ID for the document type determined above. Note this number range ID.
Finally, go to
T. Code: FBN1
Key-in your company code and maintain the Interval for the number range ID. (If already maintained, check whether Box: Ext. is marked as checked or not? If yes, remove the check and save and try to release the Invoice for Accounting).
Hope, this may help you.
Best Regards,
Amit
Hope that helps, points welcome

Automatic number range assignment for creation of material issue

Similar Messages

Maybe you are looking for