Automatic numeric values

So i use a spreadsheet that shows all the deliveries i did in the week.
traveling to different areas in California are payed more than others on a zone system so,
Zone 1= $500
Zone 2= $300
and so on.
I would like to know if there is a way to automate this proccess
So as an example in the image i would type "3" in the given cell under the zone column, and the dictated price that Zone 3 pays would automatically insert to the right of the Zone column
Is there anyway to do what im trying to do with numbers?

Hi Des,
Can't see your image.
What you need here is a lookup table and one of the LOOKUP functions. I've used VLOOKUP in the example below.
Fee List is the lookup table, listing the zones in column A and the associated fee in column B.
The larger table represents your delivery log.
The zone is entered in column C, and the fee is returned to column D, using the formula below:
D2, and filled down: =IF(LEN(C)<1,"",VLOOKUP(C,Fee List :: A:B,2,FALSE))
FALSE will display in the formula box as "exact-value"
LEN(C) is used to detect an entry in column C. If there is none, then IF returns a null string ( "" ) to its cell. If there is an entry, IF reads it into VLOOKUP, which finds it in column A of the lookup table and returns the associated value from column 2 of that table.
Regards,
Barry

Similar Messages

Automatic calculation of numeric value enter in Survey

while creating Survey in Survey Suit we enetr numeric value in field .
my requirement is that can we do automatic calculation of these numeric
values in Survey its self
Regards,
Anup Reche
9268133864

Hi Anup,
Check if the following links help you:
/people/gregor.wolf3/blog/2006/07/22/create-run-and-analyze-an-e-mail-campaign-with-a-survey-part-1
/people/gregor.wolf3/blog/2006/05/11/advanced-campaign-automation-in-mysap-crm-40-teaser
http://help.sap.com/saphelp_nw04/helpdata/en/02/739fe7a80746caa668958d558993ae/frameset.htm
Hope this helps!
Regards,
Saumya

Ho to Generate the Numeric Values Automatically before saving the records

Hello to everybody,
I have a data block naming “BILL” consisting of the following 3 field.
1. Sr_No
2. Bill_Amount
3. Description
This Data Block consist 10 records at a time.
I want that whenever I insert records in the above data block.
Serial No should automatically be generated.
For this I have applied the following code in “WHEN-NEW-ITEM-INSTANCE” trigger.
<CODE>
SELECT NVL(MAX(Sr_No),0)+1 INTO :BILL.Sr_No FROM BILL;
</CODE>
Whenever I insert records in the BILL data block, the first row automatically generates the “Sr_No”, but when I move to the next record, (remember currently I have not saved the record), the same value which appeared in the previous record appears in the Sr_No field.
For example, when I insert records for the first time in the BILL, the Sr_No field automatically generates value “1”, but when I move to the next record while not saving the first record the next row still generating value “1”, while it should be value “2” and so on.
Note that I want that before saving the previous record when I move to the next row, the Sr_No should generate the next continuous value like in example.
Please help me to solve out this problem.

You have practically scratched you left ear with your right foot while jumping on the left foot :-)
Seriously, you guys don't need to go to all this trouble.
If you want a serial number incrementation, all you need to do is to either select the max value + 1 from the table or select the next value from a sequence in an PRE-INSERT trigger on block level, and that's it!!!!
Tony

Creating a sound from an array of numeric values and playing it on speakers

How do I create take a sound I have stored as an array (or could be an arraylist if needed) of numeric values (at the moment as doubles) whiten my program and output it to speakers? I am using blueJ.
for example (0, 0.1, 0.4, 0.8, 0.9, 1, 0.8, 0.6, 0.3, 0.1, etc...) would be a very high frequency sin wave.
Edited by: alan2here on Feb 6, 2008 11:28 AM

I stumbled upon this thread with a question somewhat related:
I've recorded a wave file from microphone. But what I would like is an array of numbers in the same way alan said. I'm also working on my own project involving signal processing (i'm trying to do speech recognition).
I can't really find a nice way of getting that array of numbers. I've tried to find out how wave file stores it's data, and directly read from the File object, but i figured there should be an easier way...
I used this code to read the sound:
*     SimpleAudioRecorder.java
*     This file is part of jsresources.org
* Copyright (c) 1999 - 2003 by Matthias Pfisterer
* All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright notice,
*   this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
*   notice, this list of conditions and the following disclaimer in the
*   documentation and/or other materials provided with the distribution.
|<---            this code is formatted to fit into 80 columns             --->|
import java.io.IOException;
import java.io.File;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.TargetDataLine;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.AudioFileFormat;
public class SimpleAudioRecorder
extends Thread
     private TargetDataLine          m_line;
     private AudioFileFormat.Type     m_targetType;
     private AudioInputStream     m_audioInputStream;
     private File               m_outputFile;
     public SimpleAudioRecorder(TargetDataLine line,
                         AudioFileFormat.Type targetType,
                         File file)
          m_line = line;
          m_audioInputStream = new AudioInputStream(line);
          m_targetType = targetType;
          m_outputFile = file;
     /** Starts the recording.
         To accomplish this, (i) the line is started and (ii) the
         thread is started.
     public void start()
          /* Starting the TargetDataLine. It tells the line that
             we now want to read data from it. If this method
             isn't called, we won't
             be able to read data from the line at all.
          m_line.start();
          /* Starting the thread. This call results in the
             method 'run()' (see below) being called. There, the
             data is actually read from the line.
          super.start();
     /** Stops the recording.
         Note that stopping the thread explicitely is not necessary. Once
         no more data can be read from the TargetDataLine, no more data
         be read from our AudioInputStream. And if there is no more
         data from the AudioInputStream, the method 'AudioSystem.write()'
         (called in 'run()' returns. Returning from 'AudioSystem.write()'
         is followed by returning from 'run()', and thus, the thread
         is terminated automatically.
         It's not a good idea to call this method just 'stop()'
         because stop() is a (deprecated) method of the class 'Thread'.
         And we don't want to override this method.
     public void stopRecording()
          m_line.stop();
          m_line.close();
     /** Main working method.
         You may be surprised that here, just 'AudioSystem.write()' is
         called. But internally, it works like this: AudioSystem.write()
         contains a loop that is trying to read from the passed
         AudioInputStream. Since we have a special AudioInputStream
         that gets its data from a TargetDataLine, reading from the
         AudioInputStream leads to reading from the TargetDataLine. The
         data read this way is then written to the passed File. Before
         writing of audio data starts, a header is written according
         to the desired audio file type. Reading continues untill no
         more data can be read from the AudioInputStream. In our case,
         this happens if no more data can be read from the TargetDataLine.
         This, in turn, happens if the TargetDataLine is stopped or closed
         (which implies stopping). (Also see the comment above.) Then,
         the file is closed and 'AudioSystem.write()' returns.
     public void run()
               try
                    AudioSystem.write(
                         m_audioInputStream,
                         m_targetType,
                         m_outputFile);
               catch (IOException e)
                    e.printStackTrace();
     public static void main(String[] args)
          if (args.length != 1 || args[0].equals("-h"))
               printUsageAndExit();
          /* We have made shure that there is only one command line
             argument. This is taken as the filename of the soundfile
             to store to.
          String     strFilename = args[0];
          File     outputFile = new File(strFilename);
          /* For simplicity, the audio data format used for recording
             is hardcoded here. We use PCM 44.1 kHz, 16 bit signed,
             stereo.
          AudioFormat     audioFormat = new AudioFormat(
               AudioFormat.Encoding.PCM_SIGNED,
               44100.0F, 16, 2, 4, 44100.0F, false);
          /* Now, we are trying to get a TargetDataLine. The
             TargetDataLine is used later to read audio data from it.
             If requesting the line was successful, we are opening
             it (important!).
          DataLine.Info     info = new DataLine.Info(TargetDataLine.class, audioFormat);
          TargetDataLine     targetDataLine = null;
          try
               targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
               targetDataLine.open(audioFormat);
          catch (LineUnavailableException e)
               out("unable to get a recording line");
               e.printStackTrace();
               System.exit(1);
          /* Again for simplicity, we've hardcoded the audio file
             type, too.
          AudioFileFormat.Type     targetType = AudioFileFormat.Type.WAVE;
          /* Now, we are creating an SimpleAudioRecorder object. It
             contains the logic of starting and stopping the
             recording, reading audio data from the TargetDataLine
             and writing the data to a file.
          SimpleAudioRecorder     recorder = new SimpleAudioRecorder(
               targetDataLine,
               targetType,
               outputFile);
          /* We are waiting for the user to press ENTER to
             start the recording. (You might find it
             inconvenient if recording starts immediately.)
          out("Press ENTER to start the recording.");
          try
               System.in.read();
          catch (IOException e)
               e.printStackTrace();
          /* Here, the recording is actually started.
          recorder.start();
          out("Recording...");
          /* And now, we are waiting again for the user to press ENTER,
             this time to signal that the recording should be stopped.
          out("Press ENTER to stop the recording.");
          try
               System.in.read();
          catch (IOException e)
               e.printStackTrace();
          /* Here, the recording is actually stopped.
          recorder.stopRecording();
          out("Recording stopped.");
     private static void printUsageAndExit()
          out("SimpleAudioRecorder: usage:");
          out("\tjava SimpleAudioRecorder -h");
          out("\tjava SimpleAudioRecorder <audiofile>");
          System.exit(0);
     private static void out(String strMessage)
          System.out.println(strMessage);
}Daniel

How to connect input string value to numerical values

Hello,
I am trying to figure out how to connect a single user's input string value to numerical values. Basically I want the user to input the name of a gas that I have a list for (I believe i put the list of gasses in an array>). Then I want to match 2 numerical values "a" and "b" depending on which gas name the user has put in. These "a" and "b" values will be automatically matched with the gas name from a list I put. For example the gas hydrogen has a value of 3 for "a" and 4 for "b. so when the user puts the name "hydrogen" in a string constant, automatically "a" and "b" should be outputted. I will be connecting a and b to a formula
Thanks for any help
Solved!
Go to Solution.

student11 wrote: These "a" and "b" values will be automatically matched with the gas name from a list I put. For example the gas hydrogen has a value of 3 for "a" and 4 for "b".
This sounds a lot like an Enum to me. Make sure you type def the enum to make sure updates quickly and easily make it to all copies of the enums.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Form error Invalid numeric value 06-Jun-13 for column FECHA_CAPTURA

hi,
i have an APEX form that updates a table. The form items were created autmatically from the table fields. The 3rd field is a date field and therefore the corresponding date field on the form has a calender icon on its right side. i choose a date from this calender and when i hit the update button i receive this message:
Invalid numeric value 06-Jun-13 for column FECHA_CAPTURA
any ideas?

Hi,
Could we get you to change 1010319 to a meaningful handle -- I'm Howard.
In order to give helpful answers, we usually need more information including as much relevant information as possible upfront. This should include:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
Theme used
Template(s) used / modified -- (Revelant/important for some problems.)
Region/item type(s)
and more detail about what you want to do.
Are you using ARP (Automatic Row Processing)?
Do you do any validations?
Could you make a trival 1-page application on apex.oracle.com duplicating the problem there?
Howard

Adding numerical value to radial button

By the subject you can tell I'm a newbie. I'm an old newbie :-) so even you reply please don't assume I know much of anything. Thank you. My problem is in building a form that I wish to assign a numerical value to each of six radial buttons; the value of each of these optional buttons will populate a total field. Can anyone lead me to where I might find this information? Thanks.

A tip if you are doing a total sum of several radio buttons, is how you name the fields can make the job a lot easier.
If you use 'dot notation' in your file names (e.g. 'QTY.field1', 'QTY.field2', ...etc) then you can do a Sum calculation for your total field for 'QTY'. You don't have to enter each field manually when you create the Sum calculation, plus you can add fields and they will automatically be included if they are named similarly.

Validation To check numeric value

BEGIN
IF :P3_TOTAL_AMOUNT >= :P3_NET_AMOUNT THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END;
The function returning boolean should compare total amount and net amount and through error if it less than net amount.
It works fine when the value of TOTAL amoun =365 and value of net amount = 364*(if it is all numeric value and no zero behind it)*
But the problem is
when is use Total amount = 9 and net amount = 100 (It doesnt works becuse it just takes 1 from the net amount and eliminates the zeros behind the 1(100) and it doesnt comes up with a error after validation )
Is there any one who can help me with this
Thanks,
Hary

Lev,
I'm not sure I follow. If you use to_number with a format mask and the user doesn't follow your mask, you'll get an error:select to_number('1000','999G990') from dual;This throws an "ORA-01722: invalid number" exception. That's why I say to try calling to_number without a format mask first, to handle the trivial case of the user not putting in the grouping separators (or whatever else is involved in your format).
You could, of course, put in a validation to make sure that the number follows the format you're expecting before you convert it (either for further validation, as in the original post, or for processing), but then you have multiple places where the format mask is specified--not to mention the annoyance for users when they put in a number only to be told that they need to use the appropriate grouping separators as well. My solution uses the data dictionary to get the format mask assigned to the page item and feeds that to to_number; if I change the page item's format mask, all of my processes automatically handle the new format. Because of the extra lookup, it's slightly slower than hard-coding the format mask, but that should be minimal as long as you don't use it in a where clause.
-David

Problem in spring rich client with numeric value

I am facing a problem in spring rich client.
I have a text field of NumericJTextField type which extends JTextField and it is storing value of long type.
In one constructor of this NumericJTextField ,we are creating new instance of NumericDocument which extends PlainDocument.
We are alos using document filter.
My problem is that,when i enter a numeric value starting with 0 for ex: 0123 then at the time of saving,
it automatically converts this numeric value into something else like 83 or 9 etc.
I dont know how and where this is happenning?
can anyone help mme in this?
Thanks!

It's happening somewhere in the Spring code, where it translates a string into a number. Apparently it treats strings of digits which start with a zero as octal. (You know what that means now, right?)
I don't know much about Spring, but this isn't a Spring forum so I'm free to post my uneducated wild guesses here. Quite possibly this is a Spring FAQ which you would find on the Spring website.

Looking for help with javascript to autofill checkboxes based on a numeric value.

I have a numeric field that I would like to have 1 - checkbox
out of five autofilled based on a numeric value.
For instance the numeric value is TotalPoints
If the TotalPoints Value is >10 autofill this checkbox
If the TotalPoints Value is 10 - 19 autofill this checkbox
If the TotalPoints Value is 20 - 49 autofill this checkbox
If the TotalPoints Value is 50 - 69 autofill this checkbox
If the TotalPoints Value is 70+ autofill this checkbox
Assistance in writing the correct script for this would be greatly appreciated.

All the checkboxes have separate names.
Check box #1 is AssetClass.0 with the export value of 1
Check box #2 is AssetClass.1 with the export value of 2
Check box #3 is AssetClass.2 with the export value of 3
Check box #4 is AssetClass.3 with the export value of 4
Check box #5 is AssetClass.4 with the export value of 5
Score and StrategyUse the following calculation to determine your point score and indentify the appropriate strategy listed below.A. Add your points for questions 1 – 2.
B. Add your points for questions 3 – 12.
C. Subtract B from A. (Numeric Text Box) name is TotalPoints
Points Strategy Asset Class Mix (check boxes as named above)
0 – 10 Primarily Fixed Income: 80% Fixed Income; 20% Equity
10 – 19 Balanced Fixed Income-Oriented: 60% Fixed Income; 40% Equity
20 – 49 Balanced Equity-Oriented: 40% Fixed Income; 60% Equity
50 – 69 Primarily Equity: 20% Fixed Income; 80% Equity
70+ Equity: 95%; 5% Cash

Popup Key LOV, NULL and "Invalid numeric value undefined for column"

Hello.
I've created an item based on database column of NUMBER type and set the following properties:
Display As = Popup Key LOV (Displays description, returns key value)
List of values definition=select 'display_value' d, 1 r from dual
Null display value=%
Null return value=
Display Null=Yes
When I select "%" in the LOV and try to apply changes to database I get error:
ORA-20001: Error in DML: p_rowid=1781, p_alt_rowid=N1, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value undefined for column N2
Error Unable to process row of table TTT.
If I set Display As = Select List, all works fine. But I need Popup Key LOV.
Could anybody help me?
I use Application Express 2.2.1.00.04

Hi all,
I did my homework and solved this issue. First I would like to thank Patrick Wolf for the invaluable help he gives out on thread Re: Null value handling in LOVs The code presented here is just a minor edit to his code, but an essential one when dealing with Popup Key LOV items.
Here's what I did:
1. Create an Application Process.
Name: RemoveNulls
Sequence: 0
Point: On Submit: After Page Submission - Before Computations and Validations
Process Text:
BEGIN
    FOR rItem IN
      ( SELECT ITEM_NAME
          FROM APEX_APPLICATION_PAGE_ITEMS
         WHERE APPLICATION_ID   = TO_NUMBER(:APP_ID)
           AND PAGE_ID          IN (TO_NUMBER(:APP_PAGE_ID), 0)
           AND LOV_DISPLAY_NULL = 'Yes'
           AND LOV_DEFINITION   IS NOT NULL
           AND LOV_NULL_VALUE   IS NULL
    LOOP
        IF (V(rItem.ITEM_NAME) = '%null' || '%' OR V(rItem.ITEM_NAME) = 'undefined')
        THEN
            Apex_Util.set_session_state(rItem.ITEM_NAME, NULL);
        END IF;
    END LOOP;
END;Error Message: #SQLERRM#Condition: None
2. You should be able to submit a Popup Key LOV with a NULL value now.
Once again, THANKS, Patrick! You rock! I'm seriously thinking of trying ApexLib now :)
Georger

Get numerical values from 2D array of string

Hello!
I start by saying that I have a base knowledge of LabView. I'm using LabView 2011. I'm doing some communications test via Can-Bus protocol. As you can see in pictures of the block diagram and of the front panel that I've attached I'm using "Transmit Receive same Port" LabView example. It works very good but I would need to insert the 8 data bytes that I receive from the server in 8 different numerical variables so that I could use them to make some operations. How can I get numerical values from the 2D array of string that I attached?
Every example that you can provide is important!
Thank you very much!
Attachments:
1.jpg ‏69 KB
2.jpg ‏149 KB

Hi martiflix,
ehm: to unbundle data from a cluster I would use the function Unbundle(ByName)…
When you are new to LabVIEW you should take all the FREE online resources offered by NI on their website!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

BEx report hangs- selecting Alpha numeric values

I am working on the existing customer report
customer is the selection parameter for my report.
Issue is Customer has numerical and alpha numerical values.
If i give parameter rangs of value is numerical
01 - 500 query works fine
01-50cust1
50 cust1 - 195 cust2
query hangs.
Is their any way we can improve the query performance .
for searching alphanumerica values.
I have a workbook is built based on the query.
morethan 6 queries attached in the sheet 1....sheet2
each sheet has it is own query with values.
when I refresh and execute the workbook with the customer alphanumerica values it hangs.
Query is built based on the multiprovider.
Please help me onthis

Hello,
Try exporting in the 'fully formated grids and text'. It shouldl give you the 'member alias' used in the report.
Looks like if you export in the 'querry ready grids and text' it will show the 'member name' as in database although the report may have used the 'member alias'.
Regards

XDOFX if-then-else command testing of space and numeric value

Hi,
I have the following xdofx statement in a RTF template to display the value of one variable or another, depending on the value it contains: (the variable can contains both space or null or a numeric value).
<?xdofx: If Amount_1 = " then 'display amount_2' else If Amount_1 = 0 then 'display amount_2' else 'display Amount_1' end if?>
Result: When Amount_1 variable contains space or null value, then this If-then-else statement works. But When Amount_1 contains a number such as 0, it gives error "SBL-OMS-00203" (when it's checked against [=" ] in If condition). What's causing this? Is XDOFX being confused to test a variable that supposedly a character string (default by testing against [ =" ]), but find a number in the variable?
Any work around solution? (So [=" ] and [=0 ] can both be specified against a variable in an if-then-else statement in XDOFX).
Thanks a lot.
A.

try
<?xdofx:if (Amount_1 =’’) then ‘display amount_2’ else if (Amount_1 =’0’) then ‘display amount_2’ else ‘display Amount_1’ end if?>or
<?xdofx:if (Amount_1 =’’) then ‘display amount_2’ else if (to_number(Amount_1) =0) then ‘display amount_2’ else ‘display Amount_1’ end if?>

How do I get my XML numeric values to show up when loaded into flash?

Hi there,
I've created an AS2 3D carousel It loads text values in the "content" section of the code below - including numbers and special characters into the .swf but...
What I can't figure out, is how to get it so that the "Tooltip" loads the text into the movieclip, but can also have numeric and special characters in it.
For example, I need the title of one of the icons on this carousel to be "3D Images," but only the "D Images" shows up from the XML text for the tooltip. The content when a user clicks on the icon can include numbers, just not the titles for some reason.
http://iongeo.com/collaboration_test_dev/video_arctic_imaging.html
I think it has something to do with the way that my text is loaded from the xml document specifically for the tooltip and tipText for the movie clip. Can numeric values be loaded into a movie clip in AS2? PLEASE HELP!
import mx.utils.Delegate;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var numOfItems:Number;
var radiusX:Number = 300;
var radiusY:Number = 75;
var centerX:Number = Stage.width / 2;
var centerY:Number = Stage.height / 2;
var speed:Number = 0.05;
var perspective:Number = 130;
var home:MovieClip = this;
theText._alpha = 0;
theHeader._alpha = 0;
var tooltip:MovieClip = this.attachMovie("tooltip","tooltip",10000);
tooltip._alpha = 0;
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
    var nodes = this.firstChild.childNodes;
    numOfItems = nodes.length;
    for(var i=0;i<numOfItems;i++)
        var t = home.attachMovie("item","item"+i,i+1);
        t.angle = i * ((Math.PI*2)/numOfItems);
        t.onEnterFrame = mover;
        t.toolText = nodes[i].attributes.tooltip;
        t.content = nodes[i].attributes.content;
        t.header = nodes[i].attributes.header;
        t.icon.inner.loadMovie(nodes[i].attributes.image);
        t.r.inner.loadMovie(nodes[i].attributes.image);
        t.icon.onRollOver = over;
        t.icon.onRollOut = out;
        t.icon.onRelease = released;
function over()
    //BONUS Section
    home.tooltip.tipText.text = this._parent.toolText;
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
    home.tooltip.onEnterFrame = Delegate.create(this,moveTip);
    home.tooltip._alpha = 100;
function out()
    delete home.tooltip.onEnterFrame;
    home.tooltip._alpha = 0;
function released()
    //BONUS Section
    home.tooltip._alpha = 100;
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        t.xPos = t._x;
        t.yPos = t._y;
        t.theScale = t._xscale;
        delete t.icon.onRollOver;
        delete t.icon.onRollOut;
        delete t.icon.onRelease;
        delete t.onEnterFrame;
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,0,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,0,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,100,0,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,100,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,100,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,150,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,250,1,true);
            var tw5:Tween = new Tween(theText,"_alpha",Strong.easeOut,0,100,1,true);
            var tw5:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,0,100,1,true);
            theText.text = t.content;
            theHeader.header = t.header;
            var s:Object = this;
            tw.onMotionStopped = function()
                s.onRelease = unReleased;
function unReleased()
    //BONUS Section
    var sou:Sound = new Sound();
    sou.attachSound("sdown");
    sou.start();
    delete this.onRelease;
    var tw:Tween = new Tween(theText,"_alpha",Strong.easeOut,100,0,0.5,true);
    var tw:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,100,0,0.5,true);
    for(var i=0;i<numOfItems;i++)
        var t:MovieClip = home["item"+i];
        if(t != this._parent)
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,0,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,0,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,0,100,1,true);
        else
            var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,100,t.theScale,1,true);
            var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,100,t.theScale,1,true);
            var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,t.xPos,1,true);
            var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,t.yPos,1,true);
            tw.onMotionStopped = function()
                for(var i=0;i<numOfItems;i++)
                    var t:MovieClip = home["item"+i];
                    t.icon.onRollOver = Delegate.create(t.icon,over);
                    t.icon.onRollOut = Delegate.create(t.icon,out);
                    t.icon.onRelease = Delegate.create(t.icon,released);
                    t.onEnterFrame = mover;
function moveTip()
    home.tooltip._x = this._parent._x;
    home.tooltip._y = this._parent._y - this._parent._height/2;
xml.load("icons.xml");
function mover()
    this._x = Math.cos(this.angle) * radiusX + centerX;
    this._y = Math.sin(this.angle) * radiusY + centerY;
    var s = (this._y - perspective) /(centerY+radiusY-perspective);
    this._xscale = this._yscale = s*100;
    this.angle += this._parent.speed;
    this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
    speed = (this._xmouse-centerX)/8000;

Kglad, you are my HERO!
Thanks so much for your reply, I did not know about the embed options within flash...
Mike

Automatic numeric values

Similar Messages

Maybe you are looking for