Automatic Output determination for PO for EDI

I have a requirement to generate IDOCs automatically when POs are created/changed (only for certain plants) and send this PO to a certain plant which is set up as a customer ( KU partner type in Partner profile )
I have done the following :
1) Created a Z output type - Z005
2) Created Partner profile with message determination for ORDERS with process code Me10 (also added ORDCHG with ME11 later).
3) Create condition table - 925 with PO output type and Plant as criteria
4) Maintained and activated requirement routine(here i check if Mat. type is 'RAW' and force sy-subrc = 0) and access sequence.
5) Maintained message schema and added my condition type (Z005) and requirement routine(911) there.
6) I have config to submit IDOCs immediately in Partner profile and in NACE.
But somehow, the output type Z005 for EDI (6) is not automatically created when I create a PO that matches my conditions.
I am able to create an Idoc when I manually Key in Z005 in PO header message.Once i save after manually enter the message type, it is auto generating on any further updates.
Am I missing any config to auto generate Z00t type output for EDI for the first time?
Thanks in advance.
Shareen

Hi,
Check this document for reference:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d4ce58df-0901-0010-a4be-9ae9eda61107
cheers
Aveek

Similar Messages

Urgent - Automatic output determination for PO doc type

Hello all,
I have created an output type along the lines of NEU and maintained all the necessary setting. new outpout type is ZNEU. I want this to be triggered when i save my PO with new PO order type ZS.
However, when i save my PO type ZS no output determination takes place.
Where exactly is the link between PO type ZS and output type ZNEU.
Any help will be appreciated.
regards
s Datar

Check all the settings as mentioned below
PO Output
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
GR Output
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Regards,

Automatic output determination for SO when changes done

Hi
I created one output type ZNSO for sales order and created access sequence and condition record for Order Type in VV11. Now, I am able get that output type ZNSO in messages automatically while creating SO (VA01) and posting an IDoc.
But, my requirement is, If I change the sales order (VA02) that should post an IDoc automatically (User doesn't want to enter output type manually).
How can I achieve this. Plz help me on this.

Hi
In NACE, Select the output type.
There in GENERAL tab,
CHECK on MULTIPLE ISSUING,
Fill Program as FM06AEND and
Form routine as CHANGE_FLAG.
BR
Asik.

Output determination for Sub-Shipment

Hello All,
I have a unique situation and need your inputs to identify possibilities in resolving it.
Here is the situation:
The transportation planning (TPE system) at our client is done by a 3rd party software. Now, we receive a Sales Order from a customer; create a delivery. TPE system creates the shipments and we PGI it and the sales order follows through the next steps. The shipments created from TPE go to Carriers and they carry the product from our warehouse to pool points from where customers pick it up. We have to pay the carriers from moving our goods from our warehouse to pool points. Thus whenever a shipment is created, we check-in...do the next steps in WM and finally when the shipment is ready, it triggers a payment IDOC to be sent to finance (an external system) so that it can be matched with Carrier invoices and then paid.
Our unique problem: There is a carrier (lets call it NCP) who is moving our goods from warehouse to pool point. We got a sales order from customer. This customer doesn't pick up goods from the pool point. He wants it to be delivered to his distribution center and to do this he is using the same transportation carrier (NCP). Thus when we received the sales order from customer, TPE system created a master shipment (5000001M) for NCP to pick up from our warehouse and deliver to pool point. You might be aware that TPE optimizes the route and thus combines multiple deliveries into one master shipment. From here NCP should pick up a part of the master shipment and deliver it to client. Thus SAP automatically created a sub-shipment (5000002S). This sub-shipment is a part of the master shipment and thus will not be separetely processed in WMS. The master shipment is checked-in, loaded and shipment ready - thus creating a payment IDOC to the external payee system. As the Sub-system is a part of master shipment, it is not touched and thus no payment IDOC is created.
Now the carrier sents two invoices - one for master to pick up goods from our warehouse and deliver it to pool point and the second one - to deliver a part of this shipment to customer's DC. Our payment system is unable to match it up with any IDOC's as we didn't send them out from SAP.
So this is where I'm struck. How should I configure the output for a sub-shipment so that it'll be triggered as soon as the delivery is PGI'ed? Could anyone give some inputs here?
Please let me know if more clarification is needed. Thanks in advance for looking into this

Dear VGR,
Do the configuration settings for the shipment output determination through this IMG path
IMG>Logistics Execution>Transportation>Basic Transportation Functions>Output Control-->Maintain Output Determination for Shipments
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place.
For he above requirement you take help of ABAPer to develop the output program in such way and assign that program to your shipment output type.
Maintain the condition records through VV71 transaction with Transm. Medium EDI and Email
I hope this will help you,
Regards,
Murali.

Output Determination For Posted Invoice

When an invoice is posted against a purchase order I need the system to create an IDOC for external transmission.
I already have a partner profile setup for the external party (vendor). How do I go about setting up the output determination?
Thanks - points will be rewarded.

Hello, Brian
To setup the Output determination for Invoice Verification, follow the steps:
You can configure these settings through t.code: NACE
or NACT
By specifying the Application: MR (this is for INVOICE)
Select -> Application MR -> Press Output types
then -> Select your Output type
(choose LIEF, if Output is for External Vendor).
-> goto Details
then
-> choose the relevent fields in Default values Tab (i.e, mainly Dispatch TimeTransmission medium Ex: 5-External send and 6-EDI similarly Partner function Ex: VN-Vendor,etc )
then
-> Processing routines
-> Partner functions
Suggestion: You can use NACE or NACT (either)
Hope this will clarifies you,
Reward, if it helps,
Regards,
Srin.K

Output determination for shipment types

Hi SD gurus,
I am new to SAP. I am unable to configure o/p for shipment documents. I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place. an some1 help me through this.
Thanks in advance.

Dear VGR,
Do the configuration settings for the shipment output determination through this IMG path
IMG>Logistics Execution>Transportation>Basic Transportation Functions>Output Control-->Maintain Output Determination for Shipments
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place.
For he above requirement you take help of ABAPer to develop the output program in such way and assign that program to your shipment output type.
Maintain the condition records through VV71 transaction with Transm. Medium EDI and Email
I hope this will help you,
Regards,
Murali.

Output determination for ordering address

Hi
In our business, more than one ordering address might be available for the same vendor. Therefore, we need to send Purchase Orders to different Ordering Address for the same vendor.Kindly help how to maintian the output determination for this.
-Prabu

Hi Prabhu
Output determination
What is output?
Output is communication. When we create a transaction in sales & distribution, and save the transaction we may have to communicate to the concerned business partner about the transaction.
Example;
Customer--Purchase Order-VA01 (Create sales Order)- save the sales order- send the order confirmation to the customer
Here the output is Order confirmation
This output is sent to business partner-Customer-Sold to Party
Other Examples: Quotation, Invoice, Delivery note, Packing List
Output determination happens through Condition Technique.
Condition records are very important here. And these records contain answers to following questions.
a)     What is the Output Type? Order confirmation or Invoice etc
b)     Who is the recipient? A Sold-to-party or Payer etc.
c)     What is the media? Take print out and send, or as email? Or Fax? Or EDI (Electronic data Interchange)
d)     When output to be processed? Immediately when the transaction saved or scheduled to happen at particular Time etc
e)     In which language the output to be prepared
Customization:
IMGSDBasic functionsOutput Control
Output Determination
Output Determination using Condition technique
Maintain Output Determination for Sales Documents
Maintain output types
SAP provides standard Output types for sales, shipping, transportation and billing
Sales:
AF00                    Inquiry
AN00                    Quotation
BA00                    Order
RD03                    Cash sales invoice
Each of this condition type has Repository data called Routines
a)     Program---Program that reads data from tables (VBAK / many tables storing data pertaining header etc)
b)     Form routineProgram used for creating layout
c)     Form---Layout
The Output type has an Access sequence
Example: BA00 has access sequence 0010
Access sequence uses sales document type as the field under table 7
SAP provides standard Procedures, Copy the procedure and assign it to the Sales document Type
Select maintain output determination procedure
Position               V10000 (Order Confirmation)
Select V10000 and Copy as
ZV1000 Kirlosakr Order Confirmation
Save
Assign output determination Procedure
Allocate Sales Document Header
Position ZKOR
Sales document Type               Procedure
ZKOR                              ZV1000
Save
Now maintain Condition Records
SAP menuLogisticsSales & DistributionMaster data-Output--sales document
Create VV11
Sales Doc=ZKOR
Partner function=SP
Media=1 Printout
Date=4 immediately when saving transaction
Lang=EN
Now select Communication Tab
Printer= A000 virtual Printer
Save the Record
Create an order and check the Order Confirmation
Create VA01
Save
VA02- sales documentissue output to
Select BA00 and select Print review to see the Output
Outputs for shipping processes customization carried out under Logistics Execution
IMG MenuLogistics executionShippingBasic shipping Functions-Output Control-Output determination---
Maintain output determination for outbound deliveries
Std Delivery outputs
LD00                    Delivery document
PL00                    Packing List
Follow the same procedure, like in sales, Copy the std Procedure and assign to respective documents like Delivery document etc
Output determination for Groups---Used for picking list generation
Output determination for handling unitsfor packing
Reward if useful to u

Output determination for PGI

Hi Gurus,
My requirement is
i have STO from 0001 to 0002 plant Both are WM managed. i did Outbound delivery, TO, confirmed TO. When i do a PGI for Outbound delivery, automatically output should trigger. this should happen only for receiving plant 0002.
Please provide the step by step procedure for configuring Output type.
This will helps me lot
Thanks
Mahesh

Hi,
The Standard output type used for the same is LAVA(Outgoing Shipping Notification).
Check the settings on IMG -> Logistics Execution-> Shipping-> Basic Shipping Functions-> Output Control-> Output Determination->Maintain Output Determination for Outbound deliveries-> Maintain Output Types
TC: V/34
Kindly award points if helpful.
Regards,
Vinu

Output determination for PO

Hi, I don't have much knowledge,waht are the steps and settings required to maintain output determination for purchase order and material document.
Thank you.

Hi,
PO Output
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
GR Output
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Regards,
Biju K

Output determination for Customer Account group - A brain teaser

At the place of configuration for Account groups, there is a field called Output Determination which has values like DB001, DB002 etc which says output for sold to, ship to and so on...
What is the purpose of maintaining output determination procedure at the account group level?
And also, where can i do the complete output determination for it? Like i could see Output determination for sales activities, sales documents, billing documents and shipping...But no where in the img screen, i found a place where i can configure these? Any ideas?

In SAP, we send different output types(read documents) for Inquiries, quotations, orders etc. to relevant partners (read contact persons) sold-to party, ship-to party etc. thru various transmission mediums like ex. Print, Fax, e-mail etc.
Output can be determined by using component output determination procedure. System should know from where the output is to be determined whether from IMG or from customer A/C group. This is depended upon the control that we can activate or deactivate in "Check access for condition type" in definition of the output type (T.Code: NV03)
Output Determination:
IMG > Sales and Distribution > Basic Functions > Output Control > Output Determination Output Determination Using the Condition Technique > Maintain Output Determination for Sales activities/ Sales Documents etc.
Regards
AK
Reward points if helpful

Problem in automatic batch determination for components in process order

hi
Ours is a process order industry. Here we prepare food items.
We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
The batch procedure picked is me0001 for 261 movement type instead of C00001.
Because of that we need to enter batch manually.
Send us the procedure to automatic batch determination for components.
regards
ravi

Ravi,
Before posting please do search in this forum because this topic has been discussed many times in past.
Please check below links which could be helpful to you Automatic batch determination in process order
http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
If you still have issues then please come back.
Br
KK

Output determination for PO and MIGO

HI,
Please provide me complete config of output determination for PO and MIGO.
PO print out.
GR, GI,TP, cancellation and return print out
Uts

Hi,
Please go through these steps you can get the GRN Printout
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Output Determination for Sales Documents distributed by fax/email

Hi Experts,
Can some one guide me regarding what all need to be done to maintain output determination for Sales documents to be distributed by fax/email.
Thanks in advance...
Regards
Vamsi

Hi Vamsi,
Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
I hope it will help you,
Regards,
Murali.

Output determination for Reservations

Hi,
Is there any who is having any idea about the output determination for Reservation.
Once the reservation is created through MRP, user gets the print out.
Please help
Sheetal

you can list all reservations in MB25
And display in MB23..
But not possible to take print...take help from abap person..
Regards
Priyanka.P

Output determination for Invoice

Hi
Pls help me with the configuration details for setting message/output determination for Invoice.

Hi Vijay,
Please have a look at the link
<a href="http://www.erpgenie.com/sap/sapedi/messagecontrol.htm">Invoice Message Control Configuration</a>
Hope this Help you,
Regards,
Lijo Joseph

Automatic Output determination for PO for EDI

Similar Messages

Maybe you are looking for