Automatic payment by BA
Hi,
I have this case :
I have several invoices for one vendor. Each invoice has a different business area.
Invoice 1 - BA = 001 - 1000
Invoice 2 - BA = 001 - 500
Now the point is that when I run the F110 for this vendor, the system group all invoices by BA for payment posting, but the position for the bank is not open:
Debit vendor - BA = 001 - 1000
Debit vendor - BA = 002 - 1000
Credit bank 1000
I need to split by BA the credit bank, too
Debit vendor - BA = 001 - 1000
Debit vendor - BA = 002 - 1000
Credit bank- BA= 001- 1000
Credit Bank- BA= 002- 1000
Is any way to do that without set the spilt in new GL?
Thanks
Cecilia
Dear Cecila,
You may consider using the BTE 1820. Please check that SAP note 912374 wherein you can use the sample code provided. You may use this code as a reference to write your own code to manipulate the payments as per your requirement.
I hope this helps you to resolve the problem.
Thanks and regards,
Suresh Jayanthi.
Similar Messages
-
Clear Down payment against Vendor Invoice through Automatic Payment Program
Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
SreenivasuluHi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas -
Hello Friends,
I have an issue in Automatic Payment. Can u help me with this. I dont know whether this is possible.
My company uses 5 company codes Say 0010,0020,0030,0040 & 1000
Company code makes vendor payment on behalf of 0010,0020,0030,0040 & itself.
Company code 0010 & 0020 seperately makes vendor payment for themselves.
In FBZP, the setting is as follows
Company code Sending company code paying company code
0010 0010 0010
0020 0020 0020
0030 0030 1000
0040 0040 1000
0050 0050 1000
The Problem is when I run the payment program for paying company code 1000. checks are voided for the open items of vendors of company code 0010 and 0020 and no cross company code entry is generated.
Can you please tell me what config change I should make so that I will be able to cut checks for company code 0010 & 0020 from thier individual company codes and from company code 1000
Thank youHi UMESH ,
For that you run two time APP for
First run for 0010,0020
Second run for 1000
For first run In F110 Go through Print data medium tab there keep the cursor on variant and select maintain variant button there in out put control select Do not void any checks check box.
If you any doubt feel free to ask
Regards
Surya -
here my doubt is the in automatic payment programme:-
here cash availablity in banks
SBI 3,00,000
HDFC 2,00,000
ICICI 4,00,000
SO MY REQUIREMENT RUN THE APP THE VALUE OF THE OPEN ITEM 5,00,000. so here is amount available in diffrent in banks are not suffiencent amount for this open item. how can we pay for the open item,
plz clarrify this one.Hi
Can you plz explain.
If in the above scenario we need to pay 500000/-
but we have funds as mentioned above.
Like
SBI 200000
ICICI 400000
HDFC 400000
Say my ranking order is ( SBI,ICICI,HDFC)
when i execute F110, for a single open item of 500000/-.
Then will amount be paid 2Lakhs from SBI & Remaining 3Lakhs from ICICI.
Awaiting for your response.
Regards,
Kalyan -
Automatic payment not specify by business area
Hello,
I am trying to run an automatic payment program for one vendor and the system splits the open items by Business area. But I donu2019t want that. I would like to aggregate line items in one, if my payment is just one.
I've check my customization and in transaction FBZP, on selection "All Company codes" I donu2019t have the field "Separate Payments for each Business Area" selected.
Do I need any other customization?
Does anyone know some?
Thank you very much for your attention.
Regards.
RitaDear Rita,
This is a Portuguese Forum. Please type according required Language.
In order to check Business Area Payment go to FI12 and verify if you have some Business Place assigned for your Home Bank definitions. You can also check in F110 parameters tab if there is some B.P. assigned for.
Verifique na FI12 se existe Local de negócio definido para o Banco Empresa. Verifique também se durante a execução da F110 foi atribuído na aba 'parâmetros'.
Att.
Marssel -
Automatic payment programme error
Dear All,
my requirment is when raise vendor invoice amount of invoice 20000rs & post payment to vendor m10000& clearing of vendor document but while i have use automatic payment programme to paid remaing amount of vendor system shoud not take remaing amount system has calculate all invoice amoun t20000rs. if remaing amount create new invoice & automatic payment programme run in system has happened. i thought this is wrong way to going on .what i want for ex in detail vendor raise invoice
use t.code Fb60 then use t.code f-53 post vendor payment then i should be using t.code f110 for remaing amount of payment .in all thing happened one invoice if any configuration please right back to me.
Thanks & Regards.
Shailesh.
9604645129I have done the same scenario. Its paying full amount. The APP will pay full amount. It doen not pay partial amount. It needs to be done manually
-
Automatic payment program - error No permitted payment method exists
Hi All,
I am doing the automatic payment run and done all the necessary config in FBZP.
1) Created the payment program at country level and assigned payment program
2) Created the payment method at company code level for check and assign the Check Form
3) Coming to Bank determination:
a) Ranking order : given the payment method(A -> Check) ,currency(MYR), ranking order (1) and assigned to house bank (CIMB)
b) Bank accounts : given house bank , payment method ,currency, account ID and clearing account number.
4) assigned the payment method (A) in vendor master.
when i run the payment run for the vendor in F110 for company code system hitting below errors:
> -
Payment method selection additional log----
> Payment method selection for items due now to the amount of MYR 112,909.38-
> Payment via payee/payer 0550000008
> Payment method "A" is being checked
> Payment with 28 print items, only 16 are allowed
> No permitted payment method exists
Information re. vendor 500000598 / paying company code 0546 ...
......payment not possible because of reported error
End of log
Job finished
please can any body help me on this. I done the same config in DEV and QAS. there working fine with out any issue. but coming to PRD its giving problem. i double confirm the config in DEV to pRD every thing fine and same.
thanks.
Sandhya.Hi...
I did check the 1) vendor address -> No gaps
2) My one is check printing not bank transfer
3) I did check all the vendor line items no payment blocks. user already unblock the relevent item to make payment.
Here weird thing is system hitting the same above mentioned error even I updated the payment method(C) and house bank (CIMB) in each and every line item of vendor invoice.
Thanks,
Sandhya. -
Hi,
We are in the process of upgrading our SAP system from release 4.6c to ECC 6.0.
As part of preparation activity, we have applied patches into our production live system (4.6c) from 48 to 54 for SAP_APPL, SAP_BASIS and SAP_ABA.
Before applying the patch, our automatic payment run executed successfully.
Using Automatic Payment Program (Transaction code: F110), we have scheduled the proposal with required parameters. After successful generation of proposal, we wanted to edit payment proposal to clear the particular selected line item. We selected required line item to be cleared; however, system is clearing all the line items which are due for payment for the given vendor.This issue started coming after we applied patch level 54 for our SAP 4.6c.
This is stopped all our outgoing payment to our business partners since yesterday.
Kindly help us regarding this issue.
Regards
vimalHi ,
What do you mean when you say Invoices were not cleared, are you generating posting orders?
Secondly either you generate posting orders or payment documents SAP will not allow to further process this documents unless you void and reverse the same.
Pls be more detailed to suggest a solution.
Thanks,
Praveen -
Automatic payment program - urgent
Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
arHi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar -
Payment not clearing for Vendor through Automatic Payment Program
Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
ShaliniI have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM -
Block of payment in automatic payment run
Dear friends,
Can anyone help me in blocking an open line item in automatic payment run which is not already blocked but it is due for payment and i donot want to make its payment in the proposal.
Also if i want to do partial payment out of the open line item proposed in the automatic payment run, how do i do it?
Please help.
Regards
Dhirav ShahIt is possible to add and delete payment blocks on individual items
if they are included in the payment proposal. When you have run
the proposal there should be a button 'Edit Proposal' and there should
be an option for payment block. You can then enter a payment block,
and when you save this the item should then appear in the payment
proposal. It is not possible to block an entire vendor account, you
can only block individual line items.
Also most important thing in case you cannot edit this field in payment proposal:
Check your customising in transaction OB27, For you to be able to change/edit "payment block" in a payment proposal, you have to set the flag 'Change in Pmnt Prop' in this transaction.
Once an item is included in the proposal, the only ways it can be blocked is by either editing the item WITHIN the proposal, or else by deleting the proposal, adding the payment block via FB02 and then rescheduling the proposal.
Exact Steps:
Press the 'Edit Proposal'
Click 'All accounting clerks' on the Accounting Clerk box (This might
not appear on your system)
Double click on a particular item which you want to change
Then you can add/remove the payment block .
Hope it helps
Rgds
Soumya -
Hi
One of the User run the F110 on some date and gave vendor numbers from 1 to 99999 with AP wire payment. Finally it showed 11 posting orders generated and completed. When I see the FBL1N for the vendor # 10346, it is showing under open only not cleared.
Could you please advise me what should I do for this.
Regards
MuraliHere are a couple of things that you can check.
1. Go to FBZP and check if the payment method is in the country of the company code in which you are running the automatic payment run (also check in 'payment methods in country' if you have anything in allowed currencies. If you have none, all currencies would work. If you have specified any, it will work only for that currency).
2. FBZP - Payment methods in company code - Check if the payment method is assigned to the company code and in the same option (payment methods per country) check if foreign business partner allowed checkbox is checked in case your vendor's country is other than the country of your company code.
3. FBZP - Bank determination - Check if the payment method is having (a) ranking order and CoCd, (b) housebank/payment method (here again the same rule above applies to currency) is assigned to bank account ID and GL account, and (c) available amounts. Value Date and Expenses/Charges are not important.
Good luck!
Assign points if it helps!!! -
Hi,
In my company I want to do the automatic payment run with the customer setoff & customer open items document currency is USD & vendor document currency is LKR .I want to do the payment run in LKR.(My company code currency is LKR) I have defined the payment method "C" in both the Master data ( Customer and Vendor). Now I am trying to run Automatic Payment Program. But system shows all Customer invoice in exception list and display the following given below message. Can I run the automatic payment program using difference currencies? Please advice me to resolve the above issue.
Further this process I am doing for LKR customer & vendors & its working fine without giving any issues.
Enter a payment method for incoming payments
Message no. FZ010
Diagnosis
The balance of the items to be paid requires a payment method for incoming payments. You specified a payment method that is defined for outgoing payments.
System Response
The payment method is rejected.
Procedure
Enter a payment method for incoming payments
Thanks
ChrishanthaHi,
I have created incomming payment method under this company code & asing to the customer master records.
How can I select multiple payment method at the time of doing auto payment run
Further , I didn't do any changes in vendor master records since I have to do the outgoing payment also
Please advice
Regards
Chrishantha -
Automatic payment run - F110 for range of periods
Dear Friends,
In Automatic Payment Run - is it possible to run for the particular period or range of periods as i need to take 14 days data .
As i need to take only previous 14 days data only
Say for eg. I have customer who is having open item from Period 01-02-2011 to till date 27-03-2011.
eg : it should take the open item in between period of 13-03-2011 to 27-03-2011.
as this need to dymanic
Help me to solve this issue.
Kind Regards,
sarfrazIf you can't use the fields on the Parameter tab, then try the Free Selections tab. If that doesn't suffice, then use the BTE for payment blocking and item exclusion - Process 1820.
-
How to set up automatic payment for the purchase order
Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advanceEither you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text -
Automatic payment program (F110) document are not update in PAYR table
Hi all,
I have make payment in F110 (automatic payment) to customer
But it is not update in PAYR table
Please guide me what I have to do for documents update in PAYR table
Thanks and Regards,
PrudhviHi,
It is possible to enter multiple documents.
You can enter a list of single documents or in intervals.
Enter the document number in ascending order.
Ex:
Individual documents.
10001,10003,10011
If the documents are in a sequence you can enter the Interval like this
(10001,10011)
Hope it helps you
Regards
Andrew
Edited by: Andrew J on May 28, 2009 4:26 PM
Maybe you are looking for
-
How to run QT and Photoshop at same time?
Hi there, does anyone know how I can keep BOTH my Photoshop file windows AND a Quicktime movie open and running at the same time. I am trying to follow a set of QT tutorial movies that I downloaded from a podcast (and I've also tried using a Photosho
-
Limit on Joined Tables or DB Links Used in a single Select Statement???
I am writing a query that joins upwards of five tables utilizing two or three DB links in the process. When I run the query I get an error telling me that the table or view does not exist. I know that it does in fact exist and I am able to run a sepa
-
Standard report on changes in po document
Hi all, Is there any standard report to Ability to view audit trail of releases and changes to all purchasing documents. Thanks & Regards,
-
Hey people, I have a problem with my Muvo TX USB 2.0 : when i try to switch on my mp3, "File Error System" appears on the screen and the player switches off on its own. When I plug it in my laptop, i'm unable to access the hard dri've but I can see t
-
After updating MobileMe calendar on MobileMe, shared calendars, one of the new features, does not appear on the iPad. Is this an iPad 4.X feature?