Automatic Payment Error

Hi Gurus,
I am facing one error every time when i am running automatic payment. No permitted payment method exists.
For this every time I am editing the proposal and assigning payment method, House bank and A/c ID
already assigned House bank and payment method in verdor master. But still it is showing error. Is there any setting for this.
Thanks in Advance

Hi
I alreday done but still i am getting error

Similar Messages

Automatic payment error - no valid payment method found

I created an invoice which i try to clear in f110. the vendor has the appropriate payment methods specified too but still I get this error "No valid payment method found " for that document.
kindly assist, if anyone knows where can be the error.
this is only for one company code.
thanks

Hi,
Check the configuration of Automatic Payment Program. Check "Bank Determination" and verify whether the paymetn method is set up for the House Bank determined by Automatic Payment Program configuration.
If the payment method in invoice or vendor master does nto match with the payemnt method set up for the house bank, you may get this error.
Regards,
Chirag
Pls. award points if this is useful.

F 110 - Automatic payment ERROR MESSAGES

I am trying to charge a client by automatic payment (F110) but something happens and I canu2019t generate a payment proposal.
The 3 following error messages appear:
1) In u201CData medium administrationu201D I see:
No data records found for these selection criteria
Message no. FZ208
Diagnosis
No data could be accessed for this selection.
Possible causes are:
u2022     No data exists for the activated selection.
u2022     You have no authorization to display or edit data from this selection.
Procedure
First check whether your selection criteria are correct. You may need to expand the criteria to include a larger search area to check whether data exists in the system.
Make sure you have the proper authorizations for displaying and editing data. Read the Release note for DME management for further information on the authorization objects.
Proceed
2) When I try to see the payment proposal:
Company codes PS01/PS01 do not appear in proposal 08.04.2010 00000; correct
Message no. FZ003
Diagnosis
No data exists for the specified paying company code PS01 and the specified sending company code PS01 in payment proposal 08.04.2010 00000.
System response
The payment proposal cannot be edited.
Procedure
Check the flow trace and payment proposal list in order to determine why the specified company codes are not contained in the proposal.
3) In the u201CJob log entriesu201D I see:
Program RFFOBR_A: No records selected
Message no. F0073
Diagnosis
The system did not find any data to be processed in the payment dataset.
Procedure
Check the selection criteria with which you started the payment medium program RFFOBR_A and compare it with the payment list.
Client description:
The customeru2019s document has the following characteristics:
    Document date is 09/25/2008. Net due date was changed to 04/30/2010
ABOUT F110:
In F110 u201CParameteru201D I informed my company code, u201CPosting dateu201D is 04/08/2010 (today date), u201CDocs entered up tou201D is 04/08/2010, u201CCustomer items due byu201D 04/30/2010, u201CNext posting dateu201D 05/01/2010. The client number was also informed in all necessary tabs.
In FBZP:
Company code is informed as u201CPaying company codeu201D and payment method as well as payment medium program are informed u201CPayment method/countryu201D;
There is also a Form defined in u201CPayment methods in company codeu201D for the payment type to be used. There is no format defined in u201CPayment medium workbenchu201D (it is not defined to any payment kind. So I think it is not the problem).
Address details of customer are informed in Master data
Thank tou,
Naej
Edited by: Naej on Apr 9, 2010 1:19 AM
Edited by: Naej on Apr 9, 2010 1:26 AM

Did you check your docuemnt if the payment method is there.
You could be mentioning a payment method in the F110, just check if you have the payment method on the document which you are expecting to process.

Automatic payment program - error No permitted payment method exists

Hi All,
I am doing the automatic payment run and done all the necessary config in FBZP.
1) Created the payment program at country level and assigned payment program
2) Created the payment method at company code level for check and assign the Check Form
3) Coming to Bank determination:
   a) Ranking order : given the payment method(A -> Check) ,currency(MYR), ranking order (1) and assigned to house bank (CIMB)
   b) Bank accounts : given house bank , payment method ,currency, account ID and clearing account number.
4) assigned the payment method (A) in vendor master.
when i run the payment run for the vendor in F110 for company code system hitting below errors:
> -
Payment method selection additional log----
> Payment method selection for items due now to the amount of MYR      112,909.38-
> Payment via payee/payer 0550000008
> Payment method "A" is being checked
> Payment with 28 print items, only 16 are allowed
> No permitted payment method exists
Information re. vendor 500000598 / paying company code 0546 ...
......payment not possible because of reported error
End of log
Job finished
please can any body help me on this. I done the same config in DEV and QAS. there working fine with out any issue.   but coming to PRD its giving problem. i double confirm the config in DEV to pRD every thing fine and same.
thanks.
Sandhya.

Hi...
I did check the 1) vendor address -> No gaps
2) My one is check printing not bank transfer
3) I did check all the vendor line items no payment blocks. user already unblock the relevent item to make payment.
Here weird thing is system hitting the same above mentioned error even I updated the payment method(C) and house bank (CIMB) in each and every line item of vendor invoice.
Thanks,
Sandhya.

F110 - Automatic Payment Program - Payment Proposal Error

Hi Folks,
I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
The Error is
Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
Its says,
No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
It will be helpful, if someone can post the remedy.
Help will be surely rewarded.
Thanks,
Matthew

Hi,
The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
Regards
Balaji

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Error in Automatic Payment Program : ABAP/4 processor : GETWA_NOT_ASSIGNED

Hi SAP gurus,
I'm currently implementing automatic payment using DME to generate a text file, in a format that is specified by HSBC.
I read some articles about this topic and I have done these steps:
I created DME Format Tree (just a demo format tree).
I created a new Payment Media Format
Set up Payment Method and Assigned Payment Media Format.
But finally it didn't work.
After I run F110, the posting was okay but no Data Media File was created. The end of Job Log Entry look like below:
"Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000001977, user ID DANGNH)
ABAP/4 processor : GETWA_NOT_ASSIGNED
Job cancelled"
I don't understand why it won't work. Does anyone here have any suggestion for this problem.
Thanks and regards.
HaiDang.
Edited by: Maxielight on Jun 28, 2010 2:14 PM

Dear Madhu,
I have followed your suggestion but It didn't work. I used transaction SE38 to run RGZZGLUX as yousuggested.
I used ST12 to analyse runtime errors and the analysis information look like below:
Short text
      Field symbol has not yet been assigned
What happend?
      Error in the ABAP Application Program.
      The current ABAP program "SAPLDMEE2_ABA" had to be terminated because it has come across a statement
      that unfortunately cannot be executed.
Error Analysis
      You attempted to access an unassigned field symbol (Data Segment 8)
Any suggestion?
Maxielight.

Automatic Payment F110 error on Rounding Difference

Dear SAP Experts,
My client ECC6 is using automatic payment F110 to deliver payment documents.
Sometimes, occasionally, the proposal of the automatic payment gets an error which stated in the proposal log as "Rounding Difference too High".
This symptom can be fix if we refresh the witholding tax in the vendor line item in the WHT part. The refresh here is delete the WHT and save and then insert again and save the document.
Anybody faced this issue before? What is the root of the problem. Since this problem come in random, like a bug in the system.
Thanks before..

Hello
I don't understand when you say test printout. We have a proposal run and a payment run. And after the payment run is carried out you get the final print out as per the printout variant set in the parameters.
So can you please provide details as to what is exactly required.
Rgds

Automatic payment run error

Hi All,
I need help in Automatic payment run (F110). When I am giving the house bank and Account ID I am getting this error.
Bank data for house bank xyz been deleted
Message no. FZ 038
Diagnosis
Under the bank key specified for the house bank, no bank data could be determined.
System Response
The required processing cannot be carried out.
Procedure
Correct the bank key for the specified house bank or create the bank data for the presently valid key once more.
Thanks in advance

Check your bank account and bank keys in FI12 and FI03 respectively.
Thanks
Ashok

Error in printing sum value of DME file in Automatic Payment Run

Hi All,
We are in the process of upgrading from R/3-4.0B to ECC6.0.
In Automatic Payment run in transaction F110, when the spool is generated, the sum values is displaying in correctly. It is displaying and printing as actual value/100 for example if total of all the line items is 1000000, the sum value displaying as 10000 and in words also prints as ten thousands.
Kindly let us know how to fix the issue, if any one has come across with similar issue.
Thanx & Regards
Ashok

Hi VVR,
I got the following errors:
Err     Message text
003    Item is blocked for payemnt
007    Error in creating the payment doc, read job log.....
But if we have a look at the job log it is showing for all the 50,000 items... how to find where the problem is???
thanks.

Automatic payment program error

Hi,
I have finished Automatic Payment Program ( F110 ) Generally Credit note / Manual TDS Entry not yet adjusted while making Payment in F110. T D S and Credit Note amounts not deducted .Kindly do the needful on urgent basis.
Regards
Vijay

Hi,
I solved that problem and getting below error:
"Customer/vendor does not have suitable bank details for pmnt method C"
Message no. FZ019
Diagnosis
Either no bank details have been entered in the customer/vendor master record or the bank details cannot be used for the payment method entered.
For example, a payment method can require that a collection authorization exists or that the customer's/vendor's bank be in its home country.
System response
The payment method entered is not accepted.
Procedure
If the customer/vendor master record is maintained incompletely, complete the bank details.
But i maintained bank data in master record and assigned payment method to that bank
Rgds
sunfico

Automatic payment payment error

i want know what is the problem of automatic payment program run it will show the below error message.
parmeters has been entered
payment proposal has been created
payment run has been carried out.
I am checked in sm37 also there i released but same
error.it is my user problem.my user select the proposal button.
help me

Hi,
You have mentioned that you have released the job via SM37. Can you please check the status of this JOB. Has it been successfull?
Please have a look at the Joblog via SM37, sm13/st22 and try to find out the reason of this payment state, before the
next payment run.
Check the table entries in the tables reguh, regup for this payment run to check if payment documents are generated or not.
If no payment documents were generated, then delete the outputs via the menu option: 'Edit > Payments > Delete output'.
Aftewards, you can delete the proposal and the vendor should be released for a new payment.
Hope this could help you with the resolution of this issue.
Kind Regards
Soumya

Payment Proposal Error in Automatic Payment Program

While I am running the Automatic Payment Program Run after passing on the Parameters, I have created the Payment Proposal.
When I am trying the edit the payment prosal to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
Kindly help me out as the proje4ct has gone live and it is a critial requirement.
Thank you
Ravi
Mobile 9849393564

check with fowlling cases
1. payment terms
2. cash discounts
3. with- holding tax
4.next payment rundate
5. check payment block
let me know even checking of these things u have the same problems.
just now i discussed u over phone
if it is userful assgin the points
regards
venkat.

Automatic payment printing error:Program RFFOUS_C: No records selected

Hi,
I need to excute printing after payment with f110 using program RFFOUS_C.
I have done the following configurations:
- Assigned SAPScript in 'payment methods in company code' in Tcode FBZP.
- Assigned printing program in 'payment method in country
- Created check lot. Check created successfully.
- Entered variant in printing program RFFOUS_C in automatic payment F110.
Automatic payment run successfully. But printing form donnot have data which are check information
This is job log in SM37:
=======================================================================
Job started
Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000001950, user ID xxx)
Step 002 started (program RFFOUS_C, variant &0000000000093, user ID xxx)
Check number status at beginning of processing: 1002
Program RFFOUS_C: No records selected
Job finished
=======================================================================
Please give me help.
Thanks & Best Regards,

Hi,
In F110 in the tab, Additional log, tick all that is there and mention your vendor no. range that you have specified in parameters tab and run Proposal again.
Then go to proposal log to see the exact error reason..It will help..
Regards,
SAPFICO

Error in automatic payment program

hi,
i am usually do payment in other currency through automatic payment program, today it is the first time i got an error that
(error in creating payment document , read job log)
i read job log, there is no valuable information to solve that prob,
how can i solve it , i checked everything and every thing is fine,
plz give the sollution
thanks,
manoj

Hi,
Whts the Error Msg ? have you cheked the Payment document is updated with Payment Method or not. ?
Thanks
Goutam

Automatic Payment Error

Similar Messages

Maybe you are looking for