Automatic payment program bank determination

Dear Experts,
I am setting a automatic payment run program corresponding to FBZp in the old system. My problem comes in Bank Determination where payment methods are listed under my company code that do not belong to that company code. In every case that I try to delete those entries I receive error "Payment method W not defined in country" and if I try further I receive this error "Clearing acct only allowed for an outgoing bill of exch.pmnt Message no. F3029" and the screen becomes inactive.
I have takedn a look at the tabels T042E, T042I and so on but no luck.
Any advice?
Thanks alot in advance,
FI

I have a suggestion...
Since the steps in configuration are.. 1 Payment methods for Country, then 2. Payment methods per Company Code and then 3. Bank Determination, make sure that all the configuration settings are present in all 3 settings and then try to delete the entries in the reverse order.. 3. first bank determination, 2 then company code, 1 then country. It sounds like the payment method is missing in country setting.

Similar Messages

Automatic Payment Run Bank Determination

Hi,
I encounter a problem deriving the bank account ID when making payment for an item of payment method "Bank Draft". However, the configuration for the automatic outgoing payment has been done. What can be the reason that the account ID is not derived based on my configuration?
Thanks.
Regards,
Leng

I have a suggestion...
Since the steps in configuration are.. 1 Payment methods for Country, then 2. Payment methods per Company Code and then 3. Bank Determination, make sure that all the configuration settings are present in all 3 settings and then try to delete the entries in the reverse order.. 3. first bank determination, 2 then company code, 1 then country. It sounds like the payment method is missing in country setting.

Automatic Payment Program-which of the bank accounts is chosen for payment

Hi Gurus,
I have a question related to Automatic Payment Program(F110). When Automatic Payment Program is run which bank account is chosen?
Is it the
1. Main Acount
2. Payment Sub account?
Also, why?
Kindly answer.
Regards,
Sagar

Hi Sagar,
In F110, the Payment Sub Account is selected for Payment(The Outgoing Bank Account). This is defined in FBZP in the node bank determination> Bank Selection> Bank Accounts.
The reason why this GL is selected is :-
1. When you make Payment: -
Vendor A/C...Dr.
To Outgoing Bank Account
2. Bank Reconciliation
Outgoing Bank Account Dr.
To main bank Account
The entry to the main bank Account is posted only when the information that the cheque is encashed by the vendor is sent by Bank in Bank Statement. The Main bank Account is the balance as per Bank Books. So, till the time, we do not receive info from bank that the cheque is encashed, the amount lies in Outgoing bank Account and it is transferred to main bank account only upon final confirmation from bank.
Regards,
SAPFICO

Automatic Payment Program(F111) not picking Bank Sub accounts

Dear all,
The entiries genertaed from automatic payment program(F111) is not picking the bank sub accounts (Receipts/Payment GLs) which are given in the following node:-
Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts forReceiving Bank for Acct. Transfer
It is picking the Main Bank GL, which has given in bank master(FI12).
Please advise.
Thanks & regards
Ramesh Nair

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Assignment of Banks in F110(Automatic Payment Program)

Hello All,
I have a specific requirement while assigning the due items to the House Banks in Automatic Payment Program.
Requirement is like below.
There are 2 vendor line items which are due for payment in the APP.
Vendor     Amount
1000     u20AC 325
2000     u20AC 2750
House Banks and Ranking Order and available amounts are like below.
Bank * Ranking Order*        * Amount*
CITI            1                              3000
HSBC          2                             4000
As per the Standard SAP, the allocation happens based on the Vendor no. So it will be like below
Vendor 1000, amount u20AC 325 has been assigned to House Bank CITI(after this allocation, bal. available is 2675 in CITI)
For Vendor 2000, amount u20AC2750, the Bank assigned will be HSBC(as there is no sufficient balance in CITI).
Our requirement is as below(Sort the items based on the amount), so it would be like below
Vendor 2000, u20AC 2750 should be picked from Bank CITI(Ranking Order 1, after this the available balance is u20AC 250)
Vendor 1000, u20AC 325 should be picked from Bank HSBC(as there is no sufficient balance available in CITI).
Is there any standard user-exit or BTE that helps here.
Any pointers to handle this situation.
Thanks and Regards
Balaji Kancherla

Hello Gaurav,
Thanks for your reply.
BTE 1810 is not helpful in this case. This is more towards selecting the partner bank in each individual line items. Our objective is to sort the line items based on the amount(not on Vendor No. LIFNR).
Best Regards
Balaji Kancherla

Automatic Payment program for Bank bills and Bill of Exchange.

Helllo Sapients,
I need to configure Automatic Payment Program for Bank bills and Bill of Exchange. This configuration is for Europe, where Bank bills are very common.
Can someone advise me or send me the configuration steps for the same.
Thank you
Naman

Yes, as long you have an open item on the customer account that needs paying.
In F110 you see vendor_and_customer in the parameter screen.
Hth
Hein

Getting extra charge from bank during Automatic Payment Program

Hi All,
Can anyone pls tell me why Getting extra charge from bank during Automatic Payment Program.
Regards,
Ajay

Dear Diwakar,
It is certainly possible to create a transaction variant in SHD0 for the transaction FBZ0. Create a scrteen variant like ZFBZ0. I have done and tested the same and its working fine. When you are creating the screen variant, system issues certain warning messages when you are out of the reallocated option. Just ignore them and create the screen variant.
Once you save the variant, you have to assign it to a package, 6-7 times the system will prompt for this depending on the number of screens in the transaction.
Assign the screen variant ZFBZ0 to FBZ0 transaction using SHD0.
Please let me know if you need further help.
Thanks
Aravind

Automatic payment program for USD

HI,
Can any one share the steps to configure automatic payment program for USD currency.
I have done APP for advance pyment/ clearing invoice/Terms of payment.in INR ... but wanted to know how to make the payment to customers
what would be the scenario where we make the payments to customer.
Regards,
kamal

Hi,
First you have to define House Bank for USD payment and assign sub bank account id for House bank,
2. The Payment method which you are using for USD payment should tick as foreign currency allowed in payment method in company code.
3. In 'Bank Determination' button Please assign Ranking Order to payment method currency and house bank as per your organization's requirement.
4. On Bank AccountsType in your House bank name and House bank Account id and G/L account for Bank sub-account
5. On Available Amounts provide details as required as per house bank and account id.
It will solve your problems.
Regards
Pawan Gupta

Automatic payment program setting

Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?

Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

Automatic Payment Program - clarifications

Hi SAP Gurus,
I have a generic questions on Automatic Payment Program run,
1) How can i make a payment say for 100 invoices belonging to 10 vendors through 4 different House Banks. I know that we need to maintain the House Bank details in Vendor Master but for this example say House Bank is not maintained in any of the vendor masters and also in invoice documents, then in this case hope the system will pick the House Bank based on the ranking order in the configuration but i don't want to pay through these House Bank but through 4 different House Banks. How this can be achieved?
2) I have maintained the House Bank ABCD in the vendor master and posted 100 vendor invoices with different amounts and all invoices are due for payment but while running the payment run the balance in ABCD House Bank is nil and to ful fill the payment i have to use two different House Banks say EFGH and IJKL, how this can be achieved?
I would be greatly thankful to your replies.
-Kumar

Hi,
You can use the below BTE (BusinessTransactions Events) in FIBF:-
00001810 PAYMENT PROGRAM: Individual bank determination
The sample function module is SAMPLE_PROCESS_00001810
The purpose of this interface is to provide a way of individually determining which of its own bank details and which partner bank details should be used for a payment. The authorized bank details are then transferred in table form. If you do not wish to use some of the banks determined, you can set the indicator XCUSF on the relevant line.
You can search SDN etc. on learning how a BTE can be used.
Regards,
Gaurav

Automatic payment program process

Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..

Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued....

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

Automatic payment program error

Hi,
I have finished Automatic Payment Program ( F110 ) Generally Credit note / Manual TDS Entry not yet adjusted while making Payment in F110. T D S and Credit Note amounts not deducted .Kindly do the needful on urgent basis.
Regards
Vijay

Hi,
I solved that problem and getting below error:
"Customer/vendor does not have suitable bank details for pmnt method C"
Message no. FZ019
Diagnosis
Either no bank details have been entered in the customer/vendor master record or the bank details cannot be used for the payment method entered.
For example, a payment method can require that a collection authorization exists or that the customer's/vendor's bank be in its home country.
System response
The payment method entered is not accepted.
Procedure
If the customer/vendor master record is maintained incompletely, complete the bank details.
But i maintained bank data in master record and assigned payment method to that bank
Rgds
sunfico

Automatic payment Program- F110 problem

hi,
i did all house bank & Automatic Payment Program Settings
& now when i am running APP in F110 i am getting Following Problem in EDIT PROPOSAL
Error in creating the payment document;
log
please give me the solution how to come out of this problem
i did in sand box there were no problems
with regards,
jay prakash

hi
sapfico dasari
While run APP so many errors system will display
Mainly you should check following points
1.if you run APP all payment documents are in over due
2.check payment block
3.check minumum and maximum amounts for incomming and out going payments
4.check all dates
5.check nest due date
6.check all customization steps
regards
Trinadhnaidu.A
Edited by: trinadhrao althi on Oct 15, 2008 7:17 AM

Automatic payment program for customer

Hello!
I have the next issue: I want to pay physically (give money from bank) to somebody (a commission). In the system, this person is defined as customer. Can I use the automatic payment program for a customer(as it is in SAP system) and send the payment to MultiCash in order the money can go out from my account?(I want to really pay somebody defined as a customer and use the APP and Multicash)
Thank you!

Yes, as long you have an open item on the customer account that needs paying.
In F110 you see vendor_and_customer in the parameter screen.
Hth
Hein

Automatic payment program bank determination

Similar Messages

Maybe you are looking for