Automatic payment program configuration process

Dear All,
My client is useing Automatic payment program with pyment methode "cheque" in 4.6c version. Now my client wants to go for other payment methodes... i.e,.....
1. NEFT payments - online Transfer to vendor account
2. RTGS payment Methode
3. Book Transfer.
can anybody let me know the configuration process of the above methodes. Early replies with configuration process are highly appreciated.
Thanks & Regards,
swathi

Hi
Output format and required fields of file format have already taken from bank. But SAP configuration point of view i need help.
Thanks & Regards,
Swathi
Edited by: swathi fico on Sep 21, 2009 2:44 PM
Inputs from anybody please
Edited by: swathi fico on Sep 22, 2009 3:57 PM

Similar Messages

Automatic payment program configuration help u0096 Very urgentu0085

Hi all,
We have couple of house banks for a company code and have ranked them as 1 and 2 for the payment method (example: Check) so, how would or where can the user has an option to choose a house bank to pay his vendors. I saw that in the vendor master we can maintain the house bank however, that ignores the ranking maintained in the configuration and will always pick that back for processing the payments for that vendor but, we do not want to maintain in the vendor master.
Hence, can anyone tell me how that ranking thing works meaning how would SAP or why would SAP choose the second or third ranked bank in processing the payments? As far as I know we do not use the parameter house bank in F110 then where can we control what bank to use to process the payments for the vendors?
Your help in this regard is highly appreciated and rewarded with points
Thanks in advance
Kumar

Hi Kumar,
I think this setting is given in the T.Code "FBZP" under the heading Bank determination, wherein you have a selection "Available Amounts", I think if the amounts in that particular House Bank is exhausted, it will shift to the next House Bank in the Ordering level. You can just give it a try.
Regards
Sridhar

Automatic payment program process

Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..

Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued....

Configuration of Check printing in Automatic Payment Program

Hi
I am able to run the automatic payment program. But I am not sure how to configure check lots and check printing. Could any one please help me with step by step instruction regarding the configuration required after running the program.
Thanks
Hariharan G

Hi
For the program RFFOUS_C give Variant(X).
select maintain Variants button and select continue button.
give program run date , Identification feature , paying company code , sending company code , payment method , House Bank , Account ID , Check Lot NO..
Under Print Control
select Print checks checkbox , give printer name and select print immediately checkbox.
select Print Payment Advice Notes checkbox , give printer name and select print immediately checkbox.
select Print Payment Summary checkbox , give printer name and select print immediately checkbox.
No. of sample printouts (0) and select do not Void any checks checkbox.
select Attributes button and give description and save.select back arrow.
select Printout button and select Start Immediately checkbox.
In the job name for the ? give variant name(X) and enter.
To see the printed checks from the menu select System -
>Services -
>Jobs -
>Job Overview(SM37) and execute.
Also go to SP01 and execute.
we will get the list of spool requests.
Regards
Venkat
Edited by: Venkat Dara on Feb 4, 2009 12:55 PM

Automatic Payment Program (APP)

Hello Sapients,
Scenario:
A down payment(F-48) is made $25
Later an invoice(MIRO) is posted for $100
Now i wnt to Pay $75 to Vendor
But the Automatic payment program(F110) is not clearing the down payment against the vendor invoice.
Could you please help how to clear the down payment against the vendor invoice in the payment program
Thanks and Regards
Swathi

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

Automatic payment program setting

Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?

Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

Clear Down payment against Vendor Invoice through Automatic Payment Program

Hi
We have to adjust vendor invoice against down payment (Advance) made through automatic payment program (F110)
Please guide us is there any configuration require to consider Down payment transactions during F110 to clear against Vendor Invoice
Ex :1. Advance payment made through special GL indicator 50K.
2. Invoice document 75K posted in vendor.
3. Now we have to clear down payment made (50K) against 75K through F110.
Regards
Sreenivasulu

Hi srinivasulu,
First u create down payment request through F-47 and define the spl gl indicator for down payment and assign the gl account for down payment gl code..
Regards,
Nivas

Automatic payment program - urgent

Dear all,
i configured automatic payment program. when i run the automatic payment program using f110, accounting documents to Vendor account and house bank account are not generated. In the status bar, only the following messages appear:
"Parameters have been entered"
"Payment proposal has been created"
"Payment run has been carried out"
The following message is not appearing:
"Posting orders: X generated, X completed."
Can anyone guide me to solve this issue?
Will award maximum points.
Thanks in advance,
Regards,
ar

Hi,
You get the message Posting orders X(Ususally no. of documents) generated and X completed, it means that your proposal was successful. You will not get the document number in the status. Click on the Payment proposal log to view the document number generated.
Regards
Sridhar

F110 Automatic Payment Program- restrict items per payment document

Hi,
I want to know whether it is possible to restrict number of invoices to be paid in one payment document.
Scenario:
Suppose a vendor has 25 invoices to be paid normally all the invoices would be paid thru' one payment document but my client wants to restrict the number of invoices in one payment document as 10.
Is there any config to be maintained in FBZP?
I hope I am clear in my query.
Thanks
Suresh

Hello Suresh,
I feel that the number of items to be processed in a payment run cannot be restricted.
Please go through the below link to understand the various processing settings for the automatic payment program.
http://help.sap.com/saphelp_46c/helpdata/en/47/8bf634b576bc4ee10000009b38f83b/frameset.htm
With Regards
Vijay Gajavalli

Automatic Payment Program Proposal split same vendor invoices

Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
Satya

Hello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala

Automatic payment program for USD

HI,
Can any one share the steps to configure automatic payment program for USD currency.
I have done APP for advance pyment/ clearing invoice/Terms of payment.in INR ... but wanted to know how to make the payment to customers
what would be the scenario where we make the payments to customer.
Regards,
kamal

Hi,
First you have to define House Bank for USD payment and assign sub bank account id for House bank,
2. The Payment method which you are using for USD payment should tick as foreign currency allowed in payment method in company code.
3. In 'Bank Determination' button Please assign Ranking Order to payment method currency and house bank as per your organization's requirement.
4. On Bank AccountsType in your House bank name and House bank Account id and G/L account for Bank sub-account
5. On Available Amounts provide details as required as per house bank and account id.
It will solve your problems.
Regards
Pawan Gupta

Automatic Payment Program - clarifications

Hi SAP Gurus,
I have a generic questions on Automatic Payment Program run,
1) How can i make a payment say for 100 invoices belonging to 10 vendors through 4 different House Banks. I know that we need to maintain the House Bank details in Vendor Master but for this example say House Bank is not maintained in any of the vendor masters and also in invoice documents, then in this case hope the system will pick the House Bank based on the ranking order in the configuration but i don't want to pay through these House Bank but through 4 different House Banks. How this can be achieved?
2) I have maintained the House Bank ABCD in the vendor master and posted 100 vendor invoices with different amounts and all invoices are due for payment but while running the payment run the balance in ABCD House Bank is nil and to ful fill the payment i have to use two different House Banks say EFGH and IJKL, how this can be achieved?
I would be greatly thankful to your replies.
-Kumar

Hi,
You can use the below BTE (BusinessTransactions Events) in FIBF:-
00001810 PAYMENT PROGRAM: Individual bank determination
The sample function module is SAMPLE_PROCESS_00001810
The purpose of this interface is to provide a way of individually determining which of its own bank details and which partner bank details should be used for a payment. The authorized bank details are then transferred in table form. If you do not wish to use some of the banks determined, you can set the indicator XCUSF on the relevant line.
You can search SDN etc. on learning how a BTE can be used.
Regards,
Gaurav

Automatic Payment Program(F111) not picking Bank Sub accounts

Dear all,
The entiries genertaed from automatic payment program(F111) is not picking the bank sub accounts (Receipts/Payment GLs) which are given in the following node:-
Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts forReceiving Bank for Acct. Transfer
It is picking the Main Bank GL, which has given in bank master(FI12).
Please advise.
Thanks & regards
Ramesh Nair

Hi,
The config : Financial Accounting --> Bank Accounting --> Business Transactions -->Payment Transactions --> Payment Request --> Define Clearing Accts for Receiving Bank for Acct. Transfer
Is to decide bank sub account of the sending bank, when you are doing Bank to Bank transfer. This is manditory for cash management bank to bank transfer. Please read the config documentation again.
I just cut and paste from SAP documentaion.
"In this activity you define the offsetting accounts for the receiving bank accounts for bank account transfers (payments between house bank accounts) which should be posted to when payment is made.
The entries are necessary when payment requests are created for cash management payment advice notes that result from cash concentration, for example. The offsetting accounts for the paying house bank are determined by the payment program specifcations and the payment methods used. The offsetting accounts for the receiving house bank cannot be determined from these specifications, however, but can be defined in this section. "
Now, when you are creating payments with F111 and if you want to get sub accounts for house bank you have to do the following config.
F111 -> Maintain Configuration -> Bank determination -> Bank accounts ( for each accont id and payment method combination ).
Then you will see payments from this sub accounts and you have to setup posting rule to clear this account if you are doing EBS.

Automatic Payment program for Bank bills and Bill of Exchange.

Helllo Sapients,
I need to configure Automatic Payment Program for Bank bills and Bill of Exchange. This configuration is for Europe, where Bank bills are very common.
Can someone advise me or send me the configuration steps for the same.
Thank you
Naman

Yes, as long you have an open item on the customer account that needs paying.
In F110 you see vendor_and_customer in the parameter screen.
Hth
Hein

Running automatic payment program in case of multiple legal entity

Dear SAP Gurus's
Our client is a big corporate group and it includes lot of legal entities and all the legal entities are configured as Company codes in SAP.
How to proceed for F110(Automatic payment program) in such a scenario where there will be lot of bank accounts and there will be restriction on end use of funds because loans are disbursed to meet the project requirments.
Suitable answers will be rewarded with points.
Thnaks in adavnce for your kind asistance.
Regards.
skp

Hi Surendra,
Access the transaction code FBZP in SAP to configure APP.
Few points if you design a APP.
All the company codes which are included in the payment run should belong to same country.
Centralised payments can be handled using options sending company code and paying company code.
Payment methods can be maintained for country and paying company code
Ranking order can be mentioned for the banks and the payment methods in APP
The amounts which you mention as available amounts are only PLANNED amounts for the number of days.
Please refer the below link to know more:
http://www.sapdb.info/configure-the-automatic-payment-program/
Thanks
Aravind

Automatic payment program configuration process

Similar Messages

Maybe you are looking for