Automatic payment program error

Hi,
I have finished Automatic Payment Program ( F110 ) Generally Credit note / Manual TDS Entry not yet adjusted while making Payment in F110. T D S and Credit Note amounts not deducted .Kindly do the needful on urgent basis.
Regards
Vijay

Hi,
I solved that problem and getting below error:
"Customer/vendor does not have suitable bank details for pmnt method C"
Message no. FZ019
Diagnosis
Either no bank details have been entered in the customer/vendor master record or the bank details cannot be used for the payment method entered.
For example, a payment method can require that a collection authorization exists or that the customer's/vendor's bank be in its home country.
System response
The payment method entered is not accepted.
Procedure
If the customer/vendor master record is maintained incompletely, complete the bank details.
But i maintained bank data in master record and assigned payment method to that bank
Rgds
sunfico

Similar Messages

Automatic payment program - error No permitted payment method exists

Hi All,
I am doing the automatic payment run and done all the necessary config in FBZP.
1) Created the payment program at country level and assigned payment program
2) Created the payment method at company code level for check and assign the Check Form
3) Coming to Bank determination:
   a) Ranking order : given the payment method(A -> Check) ,currency(MYR), ranking order (1) and assigned to house bank (CIMB)
   b) Bank accounts : given house bank , payment method ,currency, account ID and clearing account number.
4) assigned the payment method (A) in vendor master.
when i run the payment run for the vendor in F110 for company code system hitting below errors:
> -
Payment method selection additional log----
> Payment method selection for items due now to the amount of MYR      112,909.38-
> Payment via payee/payer 0550000008
> Payment method "A" is being checked
> Payment with 28 print items, only 16 are allowed
> No permitted payment method exists
Information re. vendor 500000598 / paying company code 0546 ...
......payment not possible because of reported error
End of log
Job finished
please can any body help me on this. I done the same config in DEV and QAS. there working fine with out any issue.   but coming to PRD its giving problem. i double confirm the config in DEV to pRD every thing fine and same.
thanks.
Sandhya.

Hi...
I did check the 1) vendor address -> No gaps
2) My one is check printing not bank transfer
3) I did check all the vendor line items no payment blocks. user already unblock the relevent item to make payment.
Here weird thing is system hitting the same above mentioned error even I updated the payment method(C) and house bank (CIMB) in each and every line item of vendor invoice.
Thanks,
Sandhya.

F110 - Automatic Payment Program - Payment Proposal Error

Hi Folks,
I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
The Error is
Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
Its says,
No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
It will be helpful, if someone can post the remedy.
Help will be surely rewarded.
Thanks,
Matthew

Hi,
The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
Regards
Balaji

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Payment Proposal Error in Automatic Payment Program

While I am running the Automatic Payment Program Run after passing on the Parameters, I have created the Payment Proposal.
When I am trying the edit the payment prosal to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
Kindly help me out as the proje4ct has gone live and it is a critial requirement.
Thank you
Ravi
Mobile 9849393564

check with fowlling cases
1. payment terms
2. cash discounts
3. with- holding tax
4.next payment rundate
5. check payment block
let me know even checking of these things u have the same problems.
just now i discussed u over phone
if it is userful assgin the points
regards
venkat.

Error in automatic payment program

hi,
i am usually do payment in other currency through automatic payment program, today it is the first time i got an error that
(error in creating payment document , read job log)
i read job log, there is no valuable information to solve that prob,
how can i solve it , i checked everything and every thing is fine,
plz give the sollution
thanks,
manoj

Hi,
Whts the Error Msg ? have you cheked the Payment document is updated with Payment Method or not. ?
Thanks
Goutam

Error while prinitng remittance advices from Automatic payment program

Hello all,
I am trying to print remittance advices from the automatic payment program but I get an error log stating "F0282 - Payment method(s) are not allowed for this program". Has anyone got this kind of error before. I am actually stuck in this error. I have tried changing the variant used for payment run but seem to be stuck up with the same problem.
If anyone has encountered this problem, please suggest resolution.
Thanks

Hi,
Please check the documentation for program RFFOAVIS_FPAYM which will be used for the payment medium workbench. The following reports are available
Printout files are created per company code and house bank. These can either be printed via the print manager or immediately. Depending on the parameter you select, you can print out one or more of the following:
Payment advice notes (if the information cannot be sent via EDI)
Payment summary
Error log
Regards
Srikanth

Errors In Automatic payment program

Hi ,
   I am undergoing training in SAP FI CO. I am presently dealing with the               automatic payment program in Accounts Payable.
I had errors when I was running the proposal item in the transaction code F110 like this:
   1.No payment possible because items with a debit balance still exist, see job log. And the error occurred as long as I put the dates after 01/27/2007 and before 01/31/2007 and when i put the date as 01/31/2007 the error did not occur.
   2. The second time when I was practising the same thing with different company code, the error came up as - the payment method is not defined( and the payment method that I assigned was Check).
   Kindly let me know what were the mistakes I have done.
Thanks
Shilpa Rachamallu

Hi,
If the error is that there is no valid payment method defined in the exception list of proposal run, please check the following:-
a. In FBZP for Payment Methods in Country, for the country and the payment method check the required master data specifications tab (OBVCU). For example Street, PO Box or Bank Details may be checked. Make sure that this data is filled in the Address Tab and Bank Details Tab of the Vendor Master Record.
b. Ensure that Payment method is defined in the Vendor Master Record under the Payment Transactions tab.
c. Ensure that the line items have payment methold defined.
Rgds.

Payment not clearing for Vendor through Automatic Payment Program

Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
Shalini

I have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM

F110 Automatic Payment program

Hi ,
We have an issue in th Automatic payment program F110.
We have a few vendor invoices ( 1500 euros ) for a vendor X. There is also a credit memo for that vendor (100 Euros ). When we run F110 the credit memo is going to the Exception list with an error message "001 No pymt possible because items with a debit bal.still exist "; and the invoices for 1500 euros had been paid.
Please let us know why the payment program could not net off the Credit memo against the invoices making into a payment of 1400 Euros only to the vendor.
Your response would be much appreciated.
Thanks
Balaji
Edited by: Balaji Dhanave on May 15, 2009 12:53 PM

Hi,
You will first have to CLEAR the credit memo for that vendor (100 Euros) against the invoice raised and then run the payment run for the balance credit amount. Payment run will not execute if it finds any debit balance as open item for the vendor.
Thank You.

F110-Automatic payment program payment made in other countries

I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).

Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice

Automatic payment Program- F110 problem

hi,
i did all house bank & Automatic Payment Program Settings
& now when i am running APP in F110 i am getting Following Problem in EDIT PROPOSAL
Error in creating the payment document;
log
please give me the solution how to come out of this problem
i did in sand box there were no problems
with regards,
jay prakash

hi
sapfico dasari
While run APP so many errors system will display
Mainly you should check following points
1.if you run APP all payment documents are in over due
2.check payment block
3.check minumum and maximum amounts for incomming and out going payments
4.check all dates
5.check nest due date
6.check all customization steps
regards
Trinadhnaidu.A
Edited by: trinadhrao althi on Oct 15, 2008 7:17 AM

Run date problem in F110 - automatic payment program

Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
Padmavathi

Hi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi

Business area wise Automatic Payment program run

Dear all
clarifications regarding Automatic Payment Program vs Business Area, They want to run Automatic Payment Program run Business Area wise
They want to run payment run with reference of business area
for example
1) BUSINESS AREA : A
2) BUSINESS AREA : B
Is it possible to enter business ares in automatic payment program run, if it is not possible what is the ultimate solution for this.
appreaciated
regards
babu
From Chandigarh to Chennai - find friends all over India. Click here.

Dear all
herre client is introdusing business area for running business
when i check in oby6 business area financial statments as required
if am going to pass a entry in f-02 the after assigning cost center the error is cost center not assigned to business area.
if i am going for caost center to assign business area in tc-ks02 here business area is required entry if i enterd business area if i saved that one the error is The field change business area isnot possible (transaction data already exists)
Field change Business Area is not possible (transaction data already exists)
Message no. KS134
Diagnosis
To ensure the consistency of existing data, you can only change object Business Area if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
if i follow above menu bar edit-analysis period it is giving same error
appricated
regards
babu

Automatic payment program how to explain in interviewes

hi friends
asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me my mail id [email protected]

The payment program can be broken down into the following steps:
1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
    a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
    b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
    c. What are the payment methods you want to use to pay these vendors
    d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
2. Free selection TAB - In this TAB you can restrict the 'open' items you want to select. You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors. If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
Initial status will be 'No Parameters have been entered'
Before you run the program, the status would be 'Parameters have been defined'.
After you run the proposal the status will change to 'Payment proposal has been created'.
After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
Thus the status tells you in what stage of the Payment program you are in.
Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media, or delete the payment proposal.
If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
Hope this helps you in answering your Interview questions.
Good luck.
Kalyan

Automatic payment program error

Similar Messages

Maybe you are looking for