Automatic payment program how to explain in interviewes
hi friends
asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me my mail id [email protected]
The payment program can be broken down into the following steps:
1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
c. What are the payment methods you want to use to pay these vendors
d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
2. Free selection TAB - In this TAB you can restrict the 'open' items you want to select. You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors. If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
Initial status will be 'No Parameters have been entered'
Before you run the program, the status would be 'Parameters have been defined'.
After you run the proposal the status will change to 'Payment proposal has been created'.
After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
Thus the status tells you in what stage of the Payment program you are in.
Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media, or delete the payment proposal.
If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
Hope this helps you in answering your Interview questions.
Good luck.
Kalyan
Similar Messages
-
How to put default section code in Automatic payment program(F110)
Hi,
Is it possible to put default section code(BSEG-SECCO) in transaction code F110 for down payment transactions through Automatic payment program.
in our company section code is required field for vendor transactions, if i am doing the transaction F-48 or F-53 or F-58 , i can able to give the input for section code, But when i am executing the auto payment against payment request system showing the error message 'Please Enter 1001 As Section Code" based on my validation rule for section code for posting key 29 with account type K
How to overcome the above section code issue in auto payment without deactivation of validation.Hi,
Just confirm how many section codes you are having.
If you are having only one section code for your company code then you can achieve this by developing a substitution rule.
T.code GGB1
Prerequisite
BSEG-BUKRS = 1000(give your company code)
Substitution
BSEG-SECCO=1001(give your section code)
Here take constant and give section code manually
If you are using business area then you need to give business area in prerequisite and respective section code in substitution.
After you define the substitution you need to activate for your company code through T.code OBBH.
Revert if you have any queries.
Regards,
Sankar
Edited by: Durgasankar.Innamuri on Jul 30, 2010 12:11 PM -
How to create check in batch automatically after automatic payment program
Hello
SAP Experts i am getting a issue
how to create check in batch automatically after automatic payment program ( t code is f110)
Thanks & Regards
Narendra.GHi Narendra,
Please note the process below for cheque Printing:-
1. The pre requisite for Cheque printing is you have used program RFFOUS_c/or the Z version of this program in FBZP and that you have maintained the form name in the field Form name for Payment medium in FBZP.
2. You have a pre printed stationary on which you want to print and the Program & the form has been modified to print as per this.
3. In F110, you must have assigned the Variant name, which would specify the cheque lot no. and this should exactly match with the current cheque no. in the pre printed stationary.
4. Now, after all this setting, when you run Payment run in F110, then also only the Payment documents are posted but the cheque no.s are not updated in the Payment document no. nor the PAYR table is updated. It is only when you run the Print out tab, that a spool is created in SP01 for cheque printing as per the Payment documents.
5. Then in SP01, you can print the spool on your pre printed stationary.
This is the complete process of printing cheques from F110. Hope this helps..
Regards,
SAPFICO -
How to generate checks when executing Automatic Payment Program (F110)
Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!
hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
· Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
· The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
· On certain screens you may have to scroll to view some data entry fields.
· Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
Automatic Payment Transactions: Status
2. As required, complete the following fields:
· Run date
· Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
· Posting date
· Docs entered up to
· Company codes
· Pmt meths
· Next p/date
· Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
· Vendors (from)
· Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
· RFFOAVIS
· RFFOUS_C
12. Click the tab.
Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
List Variant
32. Click .
Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
List Variant (2)
36. Click .
Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
Schedule Print
40. As required, complete/review the following fields:
· Start date
· Start immediately
· Start time
· Target computer
· Job name
41. Click .
42. Return to Step 22.
Accounting clerk
43. Click .
Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
Change Line Items
47. As required, complete/review the following fields:
· Payment block
· Discount amount
· Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
Change Payment
51. As required, complete/review the following fields:
· Payment method
· Pmt meth.supl.
· Due date
52. Click .
53. Return to Step 45.
Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
Delete proposal
60. Click .
Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
List Variant (3)
62. As required, complete the following field:
· Variant
63. Click .
Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
List Variant (4)
67. As required, complete the following field:
· Variant
68. Click .
Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget -
Automatic Payment program -line item cleared not displaying in table
automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh -
Automatic Payment Program Proposal split same vendor invoices
Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
SatyaHello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala -
Automatic payment program for USD
HI,
Can any one share the steps to configure automatic payment program for USD currency.
I have done APP for advance pyment/ clearing invoice/Terms of payment.in INR ... but wanted to know how to make the payment to customers
what would be the scenario where we make the payments to customer.
Regards,
kamalHi,
First you have to define House Bank for USD payment and assign sub bank account id for House bank,
2. The Payment method which you are using for USD payment should tick as foreign currency allowed in payment method in company code.
3. In 'Bank Determination' button Please assign Ranking Order to payment method currency and house bank as per your organization's requirement.
4. On Bank AccountsType in your House bank name and House bank Account id and G/L account for Bank sub-account
5. On Available Amounts provide details as required as per house bank and account id.
It will solve your problems.
Regards
Pawan Gupta -
Automatic Payment Program (APP)
Hello Sapients,
Scenario:
A down payment(F-48) is made $25
Later an invoice(MIRO) is posted for $100
Now i wnt to Pay $75 to Vendor
But the Automatic payment program(F110) is not clearing the down payment against the vendor invoice.
Could you please help how to clear the down payment against the vendor invoice in the payment program
Thanks and Regards
SwathiSwathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated. -
Automatic payment Program- F110 problem
hi,
i did all house bank & Automatic Payment Program Settings
& now when i am running APP in F110 i am getting Following Problem in EDIT PROPOSAL
Error in creating the payment document;
log
please give me the solution how to come out of this problem
i did in sand box there were no problems
with regards,
jay prakashhi
sapfico dasari
While run APP so many errors system will display
Mainly you should check following points
1.if you run APP all payment documents are in over due
2.check payment block
3.check minumum and maximum amounts for incomming and out going payments
4.check all dates
5.check nest due date
6.check all customization steps
regards
Trinadhnaidu.A
Edited by: trinadhrao althi on Oct 15, 2008 7:17 AM -
Automatic Payment Program - clarifications
Hi SAP Gurus,
I have a generic questions on Automatic Payment Program run,
1) How can i make a payment say for 100 invoices belonging to 10 vendors through 4 different House Banks. I know that we need to maintain the House Bank details in Vendor Master but for this example say House Bank is not maintained in any of the vendor masters and also in invoice documents, then in this case hope the system will pick the House Bank based on the ranking order in the configuration but i don't want to pay through these House Bank but through 4 different House Banks. How this can be achieved?
2) I have maintained the House Bank ABCD in the vendor master and posted 100 vendor invoices with different amounts and all invoices are due for payment but while running the payment run the balance in ABCD House Bank is nil and to ful fill the payment i have to use two different House Banks say EFGH and IJKL, how this can be achieved?
I would be greatly thankful to your replies.
-KumarHi,
You can use the below BTE (BusinessTransactions Events) in FIBF:-
00001810 PAYMENT PROGRAM: Individual bank determination
The sample function module is SAMPLE_PROCESS_00001810
The purpose of this interface is to provide a way of individually determining which of its own bank details and which partner bank details should be used for a payment. The authorized bank details are then transferred in table form. If you do not wish to use some of the banks determined, you can set the indicator XCUSF on the relevant line.
You can search SDN etc. on learning how a BTE can be used.
Regards,
Gaurav -
Automatic payment program process
Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued.... -
Urgent - Automatic Payment program
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hello,
The automatic payment program picks up the documents that have been cleared in the last year.
what could be the reason for this?
Please advise
Regards,
JayHi
Not clear what the issue is. Please explain in detail with details of the run date and id.
Karthik -
Running automatic payment program in case of multiple legal entity
Dear SAP Gurus's
Our client is a big corporate group and it includes lot of legal entities and all the legal entities are configured as Company codes in SAP.
How to proceed for F110(Automatic payment program) in such a scenario where there will be lot of bank accounts and there will be restriction on end use of funds because loans are disbursed to meet the project requirments.
Suitable answers will be rewarded with points.
Thnaks in adavnce for your kind asistance.
Regards.
skpHi Surendra,
Access the transaction code FBZP in SAP to configure APP.
Few points if you design a APP.
All the company codes which are included in the payment run should belong to same country.
Centralised payments can be handled using options sending company code and paying company code.
Payment methods can be maintained for country and paying company code
Ranking order can be mentioned for the banks and the payment methods in APP
The amounts which you mention as available amounts are only PLANNED amounts for the number of days.
Please refer the below link to know more:
http://www.sapdb.info/configure-the-automatic-payment-program/
Thanks
Aravind -
While Running Automatic payment program can't post any of the vendor docume
Hi Team,
I am Running the Automatic payment program in (F110) by assigning all of my company vendors (Ex. 0 to 9999) Normally i will take 10 to 20 hours time to complete the proposal.
In time of APP running when i am trying to post the any of the vendor document it is not allowing to post and getting the error as " Account .......... is blocked by the payment run"
Please give me the solution.
How can we post any of the the vendor documents when the APP is running.
If the APP runs 20 to 30 hours means we can not stop the vendor transactions.
Thanks in Advance
VasaviHi Vasavi,
I understood your question.
What Iam asking is you to run the APP in background. SAP gives you a option to run the APP in background using T.code F110S.
If you have multiple company codes and multiple vendors you can break the APP into several runs so that system will not take much longer time.
The solution given by me will reduce the time taken for APP but it cant resolve the blocking issue. Once your APP runs with in 12 hrs (May be you can schedule a job in night), this may not interrupt the regular business like posting of Invoices in F-43 etc.
Thanks
Aravind -
Automatic Payment Program(FBZP)
Hi All
We are facing a situation where we need to make payment to a vendor through Automatic Payment Program (FBZP) in a currency that is different from the Invoice currency. For example the Company Code currency is SEK and the invoice created is also in currency SEK, we need to pay this document in a different currency i.e., DKK. We tried all possibilities in FBZP but no luck so far.
If any body is aware of how to configure the same thru FBZP or with the help of user exit or BADI please let me know.
Thanks & Regards
Jigaryou need to make a currency revaluation (f-05)
The document should be zero SEK and the amount you wish to pay in DKK
make sure the house bank and payment method support DKK
This should allow you to use F110
Finally you need to write off the original SEK amount.
A different option could be. Reverse the SEK invoice. Create a DKK invoice. Pay the DKK invoice.
Maybe you are looking for
-
Font problem in Leopard install
After installing Leopard on G4 iMac previously running Tiger, Mail and TextEdit would quit unexpectedly when I tries to access Fonts. Other existing login accounts, and newly created accounts, were unaffected. Solution was to create a temporary new l
-
Sql loader:loading data file name to one of the tabe column.
Hi, I want to load the data file name also to one of the table column. Table structure: File_Name varchar2 Name varchar2 Age number Data File Format: Vijay|24 Anandh|24 Senthil|26 In the above eg how to write a control file to load the data file name
-
Error : The object found is not an IView: fpn
Hi Experts WE have a FPN Configured. One iview is coming from prodcuer to Consumer portal . and it is giving portal runtime error in portal. When we check the logs, it is gving the below error. com.sapportals.portal.prt.runtime.PortalRuntimeException
-
Table with InfoProvider Information
I am looking for a table that lists all InfoProviders in the BW system so I can get a list of our ODSs. Does anyone know where I can find this? Thanks! ~Nathaniel
-
Query to Identify Sets Having Given Pattern
Hi, Assume that i have following table Id Code 1 aaa 1 bbb 1 ccc 2 aaa 2 bbb 2 ddd 3 bbb 3 eee The records will be grouped by Id. I want to identify sets having following criteria 1. Set should have at least one record with code like 'a%' and should