Automatic Payment Program problem in F110
Hi Experts,
When i am running APP program in F110, after parameter selection i am not able to do further steps.
After parameters have been entered
I cant do the further steps. When ever i select edit proposal button the messages are coming like:
Proposal has been scheduled 13.11.07 and time.
Job was not released.
Thes two messages i can able to see in F110 status..
From here onwards Payment, Edit Propsal,Display Proposal, Printout buttons are not appearing in F110.
Plz. treat this matter is urgent and give ur valuable suggestions.
Thanx in advance.
Regs,
Bhaskar
Hi,
This error comes when you dont have authority to run the job. If this is the case go to SU53. You can find the object for which you are not authorized below "Authorization check failed". Take a screen shot and talk to your Basis for giving you the authority.
For the second possibility Check SM37, select the job status scheduled and then click on execute. It will show all the jobs. Select the particular job and release.
Hope this helps
Reagrds
Pratiksha
Similar Messages
-
Automatic Payment Program-problems with check printing/viewing
Hello:
I am new to the SAP field. I have been trying to make the automatic payment program work for me. I have been having trouble trying to view the print preview of checks by going to system->own spool requests.
Steps followed ---Automatic Payment Program:
I checked the open invoices -
FBL1N
I ran F110 and finally print out with the start immediately option checked
I checked the open invoices FBL1N again and all the open invoices have cleared
However I am unable to view the checks that should have printed for this payment run. Can anyone please tell me what I am doing wrong here.
Thanks,
MaheshMahesh,
Go to F110, Enter the run date and then click enter - After that click on edit and then proposal and proposal list and you can see all the details - which actually runs the program RFZALI20.
Hope that helps..
Thanks,
Nandita -
Automatic payment Program- F110 problem
hi,
i did all house bank & Automatic Payment Program Settings
& now when i am running APP in F110 i am getting Following Problem in EDIT PROPOSAL
Error in creating the payment document;
log
please give me the solution how to come out of this problem
i did in sand box there were no problems
with regards,
jay prakashhi
sapfico dasari
While run APP so many errors system will display
Mainly you should check following points
1.if you run APP all payment documents are in over due
2.check payment block
3.check minumum and maximum amounts for incomming and out going payments
4.check all dates
5.check nest due date
6.check all customization steps
regards
Trinadhnaidu.A
Edited by: trinadhrao althi on Oct 15, 2008 7:17 AM -
Run date problem in F110 - automatic payment program
Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
PadmavathiHi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi -
Vendor Tolerance Group in automatic payment program F110
Hi Experts,
We use automatic payment program F110 for payment to vendors. We want to define different tolerance group having different grace days to vendors.
e.g. Vendor 1 having tolerance group with 5 days as grace period
Vendor 2 having tolerance group with 10 days as grace period
Is it possible to have different grace days for making payment through F110. We donot want to make manual payment.
Thanks & Regards.Hi,
Please refer this link:
F110 Payment run Problem
Regards,
Pramitha. -
How to generate checks when executing Automatic Payment Program (F110)
Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!
hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
· Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
· The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
· On certain screens you may have to scroll to view some data entry fields.
· Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
Automatic Payment Transactions: Status
2. As required, complete the following fields:
· Run date
· Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
· Posting date
· Docs entered up to
· Company codes
· Pmt meths
· Next p/date
· Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
· Vendors (from)
· Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
· RFFOAVIS
· RFFOUS_C
12. Click the tab.
Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
List Variant
32. Click .
Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
List Variant (2)
36. Click .
Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
Schedule Print
40. As required, complete/review the following fields:
· Start date
· Start immediately
· Start time
· Target computer
· Job name
41. Click .
42. Return to Step 22.
Accounting clerk
43. Click .
Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
Change Line Items
47. As required, complete/review the following fields:
· Payment block
· Discount amount
· Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
Change Payment
51. As required, complete/review the following fields:
· Payment method
· Pmt meth.supl.
· Due date
52. Click .
53. Return to Step 45.
Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
Delete proposal
60. Click .
Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
List Variant (3)
62. As required, complete the following field:
· Variant
63. Click .
Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
List Variant (4)
67. As required, complete the following field:
· Variant
68. Click .
Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget -
F110 - Automatic Payment Program - Payment Proposal Error
Hi Folks,
I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
The Error is
Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
Its says,
No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
It will be helpful, if someone can post the remedy.
Help will be surely rewarded.
Thanks,
MatthewHi,
The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
Regards
Balaji -
F110 Automatic Payment program
Hi ,
We have an issue in th Automatic payment program F110.
We have a few vendor invoices ( 1500 euros ) for a vendor X. There is also a credit memo for that vendor (100 Euros ). When we run F110 the credit memo is going to the Exception list with an error message "001 No pymt possible because items with a debit bal.still exist "; and the invoices for 1500 euros had been paid.
Please let us know why the payment program could not net off the Credit memo against the invoices making into a payment of 1400 Euros only to the vendor.
Your response would be much appreciated.
Thanks
Balaji
Edited by: Balaji Dhanave on May 15, 2009 12:53 PMHi,
You will first have to CLEAR the credit memo for that vendor (100 Euros) against the invoice raised and then run the payment run for the balance credit amount. Payment run will not execute if it finds any debit balance as open item for the vendor.
Thank You. -
F110-Automatic payment program payment made in other countries
I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).
Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice -
Error in( F110) Automatic payment Program
Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank youHi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard -
Document selection in Automatic Payment program F110
Hi Experts,
Is is possible to use document number as selection criteria for automatic payment program (F110). Currently the options available are Vendor and Customer, In the "free selection" tab we can enter only one document at a time. Is it possible to select multiple documents for payment?
Thanks and regards,
AchalHi,
It is possible to enter multiple documents.
You can enter a list of single documents or in intervals.
Enter the document number in ascending order.
Ex:
Individual documents.
10001,10003,10011
If the documents are in a sequence you can enter the Interval like this
(10001,10011)
Hope it helps you
Regards
Andrew
Edited by: Andrew J on May 28, 2009 4:26 PM -
Related to automatic payment program (F110).
Hi!!
Issue is that :
SAP Automatic Payment Program :F110 creates payment in compliance with country.The has to be saved on SAP server....
(Payments run per company code)company code 230-->>create DME file >> (format per country)BACS (UK)>>then saved to sap server.
I want to know what all has to be done to perform the task & in which format it will be saved to SAP server.
Please reply soon!!
Thank You
Amit.
Edited by: Amit Kumar Singh on Feb 25, 2008 1:14 PMPlease reply soon!!
Thank You..
amit -
How to put default section code in Automatic payment program(F110)
Hi,
Is it possible to put default section code(BSEG-SECCO) in transaction code F110 for down payment transactions through Automatic payment program.
in our company section code is required field for vendor transactions, if i am doing the transaction F-48 or F-53 or F-58 , i can able to give the input for section code, But when i am executing the auto payment against payment request system showing the error message 'Please Enter 1001 As Section Code" based on my validation rule for section code for posting key 29 with account type K
How to overcome the above section code issue in auto payment without deactivation of validation.Hi,
Just confirm how many section codes you are having.
If you are having only one section code for your company code then you can achieve this by developing a substitution rule.
T.code GGB1
Prerequisite
BSEG-BUKRS = 1000(give your company code)
Substitution
BSEG-SECCO=1001(give your section code)
Here take constant and give section code manually
If you are using business area then you need to give business area in prerequisite and respective section code in substitution.
After you define the substitution you need to activate for your company code through T.code OBBH.
Revert if you have any queries.
Regards,
Sankar
Edited by: Durgasankar.Innamuri on Jul 30, 2010 12:11 PM -
F110 Automatic Payment Program- restrict items per payment document
Hi,
I want to know whether it is possible to restrict number of invoices to be paid in one payment document.
Scenario:
Suppose a vendor has 25 invoices to be paid normally all the invoices would be paid thru' one payment document but my client wants to restrict the number of invoices in one payment document as 10.
Is there any config to be maintained in FBZP?
I hope I am clear in my query.
Thanks
SureshHello Suresh,
I feel that the number of items to be processed in a payment run cannot be restricted.
Please go through the below link to understand the various processing settings for the automatic payment program.
http://help.sap.com/saphelp_46c/helpdata/en/47/8bf634b576bc4ee10000009b38f83b/frameset.htm
With Regards
Vijay Gajavalli -
Assignment of Banks in F110(Automatic Payment Program)
Hello All,
I have a specific requirement while assigning the due items to the House Banks in Automatic Payment Program.
Requirement is like below.
There are 2 vendor line items which are due for payment in the APP.
Vendor Amount
1000 u20AC 325
2000 u20AC 2750
House Banks and Ranking Order and available amounts are like below.
Bank * Ranking Order* * Amount*
CITI 1 3000
HSBC 2 4000
As per the Standard SAP, the allocation happens based on the Vendor no. So it will be like below
Vendor 1000, amount u20AC 325 has been assigned to House Bank CITI(after this allocation, bal. available is 2675 in CITI)
For Vendor 2000, amount u20AC2750, the Bank assigned will be HSBC(as there is no sufficient balance in CITI).
Our requirement is as below(Sort the items based on the amount), so it would be like below
Vendor 2000, u20AC 2750 should be picked from Bank CITI(Ranking Order 1, after this the available balance is u20AC 250)
Vendor 1000, u20AC 325 should be picked from Bank HSBC(as there is no sufficient balance available in CITI).
Is there any standard user-exit or BTE that helps here.
Any pointers to handle this situation.
Thanks and Regards
Balaji KancherlaHello Gaurav,
Thanks for your reply.
BTE 1810 is not helpful in this case. This is more towards selecting the partner bank in each individual line items. Our objective is to sort the line items based on the amount(not on Vendor No. LIFNR).
Best Regards
Balaji Kancherla
Maybe you are looking for
-
On Nokia 6233 using Opera mini song is not downloa...
When using opera mini on Nokia 6233 song is not download completed but showing complete download.
-
SPROXY: No connection to Integration Builder (only local data visible)
¡Hola! When I try to access the transaction SPROXY I get the message "No connection to Integration Builder (only local data visible)". I already did the configuration steps described in the XI Configuration Guide, section 8: Connecting Business Syste
-
Nokia Email Messaging with Proxy
Hi I am having problem with Nokia Messaging. I am using E71 in office but my office have proxy server. I have put down proxy settings into my WLAN > advance settings. i.e 10.10.xxx..xxx with port number 8881. When I am browsing internet it works fin
-
When I try to run Personal Developer on my PC, it asks for Host String also. What should be given there? I tried with "Orcl" & "Oracle", but was futility in vain. Please help. Regards Anvita Gupta
-
Will they replace the phone or just repair it? I don't want to be without a phone. Anyone have any experience with this?