Automatic PO and automatic header condition determination

Dear all,
We have business transaction where PO is getting created automatically. In real time, user is entering header condition manually, because header conditions are not allowed to have access sequence. It is difficult for users on tracking header condition manual entry details.
Can anyone throw some lights for using routine to have automatic entry of header condition while PO is created automatically ? Which routine to be explored to achieve automation of header condition value in PO ?

hi
m/06 frieght condition make header condition tick
changes which can be made
tab
under
tick the header condition
heder condition of fright
as three type
%basic
value
quantity
if you enter header condition value basis100
two line items is there in your PO ,On that time it will be updated 200 in header value
if you enter header condition % basis it will take %of total value after that
the amount will be distributed amoung the items
regards
vijay
Edited by: vijju489 on Jul 16, 2010 12:10 PM

Similar Messages

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve

My Mac air book screen automatic change and automatic open different programs during my working it's move its self and I lost my work and mouse pointer automatic dance. Help me to solve
Any one can help me

Thank you for your response - I'll give it a go.
Also, just to update, my iMac cursor seems to glitch a little bit less now. It seems that at least ONE of my problems may have been caused by sitting my iPhone upon my WACOM tablet. The tablet must receive some sort of disruption from having my phone on it - and removing it seems to remedy a fraction of my mouse-jumping problems - if only for a meanwhile.
The mouse cursor still does jump around on its own occasionally, and the other mouse problems do persist - so this must not be the only culprit for my array of problems.

Automatic UD and Automatic Stock Posting

Step 1 QS51
For Plant 1000, for 04 inspection type, I have created Z04GPF as selected set for taking UD
On double clicking the Selected set codes I wll reach the following screen
As per my requirement, I have maintained the setting for Automatic stock posting to Unrestricted Stock from Quality Inspection.
Step 2 ; QA16
Now My requirement is that I want to take Automatic UD and subsequently Automatics Stock Posting should takes place from quality stock to Unrestricted stock.
On QA16 screen I have inputted the following parameters to select the lots of the same production order and same batch material.as shown below
Sir, I am facing Problem at the area shown below on QA16 screen
Here I want to input the UD selected set maintained for plant 1000 (In specific as Accepted A ). But on selecting F4 at the field shown above I am getting the below popup window
This is the UD for SAP Standard Plant (01 GR WARENEINGANG)
Also I am unable to see 04 inspection type
The same problem is coming when I am selecting F4 on the field UD code
Dear Sir, Please suggest me whether and Where I was wrong
razvee.shaik

hi,
even i am asked to use qa41 for sheduling the job but whenever i schedule job and try qa16 for the ud and posting i recieve an error i.e (No batch input data for screen SAPLIPW1 0200)
do u faced the same error / if u have a solution to batch job, tell me about it. i am having a relavent problem ..
Regards,
Sameer Jalal

Price condition determination for purchasing contract(ME31K)

Hi Experts,
     It is possible to apply price condition determination in purchasng contract(ME31K)? We had maintain the price condition for below keys: WBS/Material number and this condition record work well in purchase order. But I hope that this condition record is applied in pruchasing contract when we create contract by ME31K. Plz kindly give me a suggestion.
So I want to check the condition dtermination is whether fullfil my requirement. If we can not use the price condition determination to get the net price, then we only go for user-exit to get it.
Thank you very much in advance.

>
Gangrong Chen wrote:
> Hi Experts,
>
>      It is possible to apply price condition determination in purchasng contract(ME31K)? We had maintain the price condition for below keys: WBS/Material number and this condition record work well in purchase order. But I hope that this condition record is applied in pruchasing contract when we create contract by ME31K. Plz kindly give me a suggestion.
>
> So I want to check the condition dtermination is whether fullfil my requirement. If we can not use the price condition determination to get the net price, then we only go for user-exit to get it.
>
> Thank you very much in advance.
Why not, in me31k, click on condition button on toolbar for item conditions and for header conditions, click on menu bar path HEADER>CONDITIONS and maintain your conditions accordingly.

Automatic determination of header condition in sales document

Hi Friends,
How can we make a header condition automatically determined in a sales document ?
Regards
Mahesh

Hi Mahesh,
You can use the condition supplements to automate the header condition. Please note that the condtion supplement procedure should consist of the Header condtion types.
Lets assume that you want to automate HB00 and RB00. Then for PR00, you should assign condition supplements procedure PR0000. This procedure should carry HB00 and RB00. Then while maintaining condition record for PR00, click condtion supplements and maintain rate for HB00 and RB00 as well.
Once you create order, you can see HB00 and RB00 getting picked up automatically.
Thanks & regards,
CLN

Pricing Procedure and automatic triggering of condition records

Dear Gurus,
I am a junior SAP SD consultant.
At the moment I am customizing SAP to generate sales documents and am using a standard pricing procedure called: RVAA01
At T-Code: V/08 when you access the reference steps of that pricing procedure you see a lot of steps ranging from
step 8 to 971
At sales order level VA01, once you have entered a PR00 condition record in VK11, and you click to view the pricing procedure:
- Why does the system only selected those basic conditions and not more?
PR00
AZWR
MWST
SKTO
VPRS
- How does the automatic selection process occur in the pricing procedure to have hundreds of steps ready to use to finally come down to those 5 steps at sales order level?
Your help is greatly needed
Regards
Chris

Whatever condition types you see in pricing procedure the same will be in V/06 where you can also see three fields
a) Access Sequence
b) Header condition and
c) Item condition
All your condition types that flows into your sale order will depend on these settings.
Normally, all item condition types will have access sequence assigned on top right for which, you will have to have relevant tables assigned in V/07.
Whatever tables you maintain in V/07, based on this combination, you would be maintaining pricing in VK11 for that condition type.
Based on the above settings, when you create a sale order, system will search for the required combination and fetch the pricing. This is for item level condition type.
For header condition type, you will not be having access sequence assigned in V/06. You can key in manually in sale order at header level condition tab so that the corresponding value will be bifurcated equally to all line items.
thanks
G. Lakshmipathi

Automatic Pricing for Header condition

Hello,
We have the following scenario.
For an specific Sales Order type we need to charge (surcharge or a fee) a fix $$ amount at the header level. This amount should be charged only if the total value of the order is less then a fixed $$ amount.
Also another condition is for a specific material group we need to charge a fix $$ amount and if this condition is selected then the other condition should not be selected.
Eg:
1) for all material with Material group AB we want to charge(via condition type) 100$ at the header level.
we want this automatically at the header.
2) For all Order type OR we want to charge(I will maintain a condition type) 200$ if the net value of that sales order is less then 5000$. This is not item specific but at the Order header level.
We dont want to manually enter the condition type (surcharge).
I know that for Header conditions we cannot have access sequence and condition records. Then how can the 100$ or 200$ charge condition type come automatically in the Sales Order if the total order value is less then 5000$.
I can have a requirement but what about the condition Record and the access sequence for the Order type or the material group?
Any Ideas?
Thanks
SAP Fan

hello, friend.
i have an hypothesis (which is merely a guess because i have not tried this recently), that it is possible to do this, but you have make your condition type both header and item, which means you get to assign an access sequence (enabling condition records). but you must also "tick" the "group condition" in the condition type so that even if this is entered at item level, this applies to the entire document and will be distributed to the items.
the group condition is supposed to be used for manually entered header conditions such as pallet discounts, and i think i might have done this for material groups, but do not recall if i've done this for order type or any other variable at one point. please do us a favor and test it, and post your findings.
regards!!!
Edited by: jonathan y on Jun 1, 2009 3:08 PM

Discount header condition should adjust automatically in line items

Hi,
I have a discount header group condition which is adjusting automatically in line items based on net price. Even if I delete one line item out of two lien items, header discount value is adjusting to balance 1st line automatically. This is hapneing in QT and in sales order without reference, but not hapening for sales order where I referenced with quotation.
Ex: I have created QT with ZD03 = -2000. This distributed for line item 1 as -1500 and 2nd line item as -500. (Here in QT if I delete the 2nd line item, then ZD03 for 1st line item is automatically adjusted as -2000 and header remains same as -2000). Now if I converted this QT to SO with same 2 line items and then in that SO if I delete 2nd line item, ZD03 for 1st line item remains as -1500 only and header changing from -2000 to -1500.
I don't want this to happen. I want the header value to remain same as -2000, irrespective of what I do for the sales order line items.
Kindly suggest.
Ratna

Hi,
Just test your requirement by going into the Condition type configuration TC V/06 for the "ZD03" ,under changes which can be made remove the Header condition and mark it as item condition and try the sales cycle.
Regards,
Ravi

Plant and shipping point is determined at Header or item level?

Hi,
Shipping point is determined at Header level or item level of Sales order?
How about Plant??
Thanks!!

Both Shipping point & Plant are determined for each Item in the Sales order automatically by the system.
For determining Plant, system first search the CMIR,
if not found the Plant there or CMIR is maintained then system searches Customer master of the SH, i
f here also not found then system sarches the Material master.
This is called Priority rule which is hard coded in SAP and can be changed by customisation.
For determining Shipping point, system takes three fields into consideration, they are
1. Shipping condition (first check Sales doc type , if not found then takes from Customer master of SP)
2. Loading group ( material master> sales org group 2)
3. Delivering Plant
So, they are (Shipping point & Plant ) item specific data in sales order.

Difference between Automatic TO and Immediate TO

Hi Gurus,
Can somebody give me the exact difference between Automatic TO and Immediate TO in WM.
When we use Automatics TO?
When we use Immediate TO?
And difference between these two?
Regards,
YHKK

Automatic TO Creation for Transfer Requirements
You can set up the Warehouse Management system to create transfer orders automatically as a background process. You set up the system to carry out this process by setting an indicator in each movement type separately. When you create a transfer requirement, the system copies this indicator into the transfer requirement header.
To activate the automatic creation of transfer orders for these transfer requirements you must start the report RLAUTA10 as a batch job. For this process you define a variant for each different indicator. This makes it possible for you to define different starting times and time spans to repeat each task periodically.
To create transfer orders automatically, three processes are available:
The system creates a transfer order for each transfer requirement
The system creates transfer orders only for transfer requirements that meet certain criteria (for example, date or time). You enter these criteria individually into a user exit.
Using criteria as described in point 2, you can also set up the system to assign a reference number to combine the transfer requirements for multiple processing. The assignment of the reference number can take place separately in a user exit.
For the interface between SD shipping and WM, you can also set up immediate or automatic transfer order creation for deliveries.
This process is controlled by the message control function in the SD Shipping component. The condition technique can be used to initiate message type "WMTA" when the delivery is created. The prerequisite for this is that at least one item of the delivery is relevant to WM. The combination "Shipping point / Delivery type" is used to determine the message type.
I hope this is sufficient ..
Rgds
Madhu

How to get automatic plant and shipping point and storage location

hi,
sap gurus,
how to get automatic plant and shipping point and storage location automatically into the sales order
i have done all the config settings for that
but its not appearing automatically.
regards,
balaji.t

Hi
Balaji...
U can get the plant in sales order, by doing the default the same in customer master or in material master. In customer master -- sales are data--shipping tab delivering plant there u can assign and get the same in order for that customer. it is better to do in customer master rather than in material master.
Shipping point is getting determine in sales order and u can not make it default like plant. Shipping point is determine in the basis of Shipping condition of customer ( ship to party)+ loading group of material + Deliverying plant there u have to assing the shipping point and it will flow in the sales order. Tcode OVL2
For S loc u have to enter manually in the sales order u can not get it automatically.
Hope this will help you.
Thx.

Condition types header condition and group condition

Hi All,
can any one tell me why the same header condition type is coming in billing document twice.The condition type has two deifferent parameters.
In first condition type:
condition class :DISCOUNT /SURCHARGE
calculation type :A percentage
condition control:A Adjust for qty variance
condition origin:A Automatic pricing
In second condition type:
condition class :DISCOUNT /SURCHARGE
calculation type :A percentage
condition control:C CHchanged manually
Condition origin:A HEADER CONDITION.
Even though only one conditon type is maintained.
Regards, Rajneesh

hi,
pl check at V/06 if you have maintained the conditon type as both header and group condition.
regards
sadhu kishore

While automatic PO creation from GR conditions to be fetched from condition

Hi SAP Gurus, i have a requirement where in I want PO to be automatically created while doing GR.All other settings I have done. Now my requirement is tat say freight conditon FRC1 should be picked up from condition record.I already have condition record maintained.please let me know if this is possible or is it like that for automatic PO creation from GR info record is mandatory.Please let me know.Thanks

Hi,
Condition record will not help for the automatic PO creation from GR. Use Info record and maintain your conditions like discount, freight,packng and forwarding etc.....

HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I have never had problems in the past. Is this a real m

My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?

It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

Automatic PO and automatic header condition determination

Similar Messages

Maybe you are looking for