Automatic PO creation from Imported Approved Requisition

Hi,
Is there any setup to allow automatic PO creation from Imported Approved Requisition.
1. Run Requisition Import to import approved Requisition with no workflow fired.
2. Can we kick off automatic PO creation workflow without kicking off Requisition approval workflow?
Any suggestion will be helpful.

Hi,
pl.review the MOS doc.
How to Create and Approve a Standard PO Automatically From an Approved Requisition Sourced to Standard Quotations [ID 308470.1]
HTH
Sanjay

Similar Messages

  • Automatically create POs from all approved requisitions

    I want to be able to automatically create purchase orders from all approved iProc requisitions (but wont have contract or blanket POs to use)
    I can get the suggested buyer added into the iProc shopping cart but want to know best route. Most people seem to have to hack the work flows so that the POs get created.
    I thought about using standard interface table to create the POs but believe that link to the requisitions wont be made (problem with reporting and encumberances)
    Would be interested in recommendations as to the best way to do this
    Thanks

    Do you buy the same items from those 9000 suppliers over and over?
    Do you want to automatically create PO or you want it to be submitted for approval as well?
    You may want to consider setting up the automatic sourcing. This way, the ASL and sourcing rules are automatically created when you create the first blanket.
    http://www.oracleug.com/user-guide/purchasing-overview/overview-automatic-sourcing
    Sandeep Gandhi

  • Automatic PO creation from SC

    Hi Experts,
    I am using SRM 7.0 with extended classic scenario and I have issue in the automatic po creation. For some Shopping Carts the PO is not automatically created. The SC is having Source of Supply Assigned and all the approves have completely approved the SC.  The latest status is  I1111          Item in Transfer Process.
    I checked in RZ20, ST22 and could not find any error or dumps.
    For the SC item under BBP_PDBEI the BE_OBJECT_TYPE is BUS2201 and BE_OBJECT_ID 1, once I trigger the PO creation manually the PO object id is reflected here.
    For such SC I am running the report BBP_ALERT_SB_NOTTRANSFERED manually which puts the SC in I1112 Error in Transmission Status and later I can trigger the SC creation from the alert monitor.
    For POs created in this manner the PO is created in Held Status without any line items, is this normal?
    I have two questions which I want to understand, how is the automatic po creation from SC setup, is there any customizing involved for the po creation from SC to happen automatically?
    What else should I check to find the reason why the the SC was stuck in I1111 status and PO was not created?

    You need to configure the Purchasing group and this will take care of automatic transfer of Doc to sourcing cockpit. Make sure you also maintain the customization for sourcing always carried out for Prod categories.
    Regards
    Saurabh

  • Creating user defined pay items in a complex PO which will be created from an Approved requisition

    Hi,
    We want to create user defined pay items in a complex PO which will be created from an Approved Requisition.
    User will select the approved Req. through WebADI and update the pay Items which will be uploaded and a complex PO will be created with user defined Pay Items.
    Approach 1:
    The API po_interface_s.create_documents is running good but there is one issue with this API as below.
    When we add user defined pay items to the po_lines_locations interface table against a line they are also getting added to the complex PO correctly.
    But the issue is coming when the API is creating default shipment lines and distribution which we dont want.
    Is there any way to stop creating the default pay items and distributions?
    We only want the shipments we have entered in the po_lines_locations interface.
    We can delete the lines from the PO_line_locations and po_distributions base tables for the default lines but that will be the last option to do delete on base tables.
    Approach 2:
    We can also do the same with the open PO import interface but it is not linking the complex PO to the approved requisition from which it is created.
    Oracle mentioned that this is a future enhancement and this functionality is not available in standard PO import prog.
    We are trying for Approach 1 so any suggestions/solutions are appreciated to achieve the requirement.
    Regards,
    Sanket

    UDT cannot be created in sbo-common. You may create new db and work with table in this db (but it will be not UDT, but standard sql table), or create new company db only for this purposes and create UDT there.

  • While automatic PO creation from GR conditions to be fetched from condition

    Hi SAP Gurus, i have a requirement where in I want PO to be automatically created while doing GR.All other settings I have done. Now my requirement is tat say freight conditon FRC1 should be picked up from condition record.I already have condition record maintained.please let me know if this is possible or is it like that for automatic PO creation from GR info record is mandatory.Please let me know.Thanks

    Hi,
    Condition record will not help for the automatic PO creation from GR. Use Info record and maintain your conditions like discount, freight,packng and forwarding etc.....

  • Automatic PO creation from PR for non materials

    A requirement has recently been raised where the business wants to introduce the use of purchase requisitions and once the purchase requisiiton has been released (approved) a purchase order be automatically created from the purchase requisition. However the business do not use or maintain material records, purchasing info records or source lists. If the the standard automatic purchase order from purchase requisition is used (ME59N) these items are required. In entereing the purchase requisition it is expected that the 'Desired Vendor' will be entered. Has anyone had a similar scenario where the automation of purchase order creation is required? Any assistance is appreciated.
    Thanks

    Hi,
    For no material, only for SERVICE procurement , the Service auto- PO created by activating Automatic Purchase order creation for Service requisitions in t.code: ML91. Create info record based on Material Group. For Automatic PO , info record is mandatory. For more please read note 635511
    Regards,
    Biju K

  • Automatic PO creation from PR with no master data

    Dear gurus,
    Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
    Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
    1.Material Master purchasing view, check automatic PO check box.
    2. Vendor Master purchasing view, check automatic PO check box.
    3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
    4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
    5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
    6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
    Thanks in advance.

    Hi,
    yes all point should be checked
    check following link
    [http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
    Regards
    Kailas Ugale

  • Automatic PO creation from PRs?

    Hi,
    I got to generate automatic purchase orders from purchase requisitions.
    A stdd Transaction ME59N is already availablefor this, but I need to create POs without GR. This is a requirement in IS Media module.
    We can approach in 2ways: 1. copy the stdd and modify
                                              2.create a Z prog from scratch
    Please help me if you have worked on a similar requirement.
    with regards,
    Ravi
    points will be given

    Hi,
    I believe you can setup this in the configuration not to do GR..
    You can check the purchasing document type config or purchasing item category configuration..
    Also check with your MM functional consultant to achieve this..
    Thanks
    Naren

  • Automatic PR Creation from Sales order

    Hi All,
              This is with respect to PR creation from Sales order for 3rd party items.
    I am able to create PR from standard sales order and i dont have any issues with that.  I have used schedule line categories which is configured with Order type Z2, Item rel for dlvy checked and Acct assigment group as E.
    Now my question is , I want to copy partners from sales order to Purchas req. Currently some partners are getting transferred from Sales order to P.Req, But not all there in sales order. Where do we control the data that can be copied from Sales order to P. Req
    Thank you
    Kris

    Hi,
    Genrating PR, Mostely depends on shedule line,see which shedule line u r determining for HIGH LEVEL ITEM ,for that shedule line maintain setting is VOV6.
    kapil

  • Purchase Order creation from closed Purchase Requisition

    Hi all,
    Please kindly help with the following questions
    1) Is it possible to lock a purchase requisition such that after a purchase order has been created, another purchase order would not be created from that purchase requisition
    2) also is it possible to assign a fixed vendor to a purchase requisition without an info record.
    Thank You.

    Hi,
    set the two message 06076 & 06400 as error so that no  more purchase order can be created with
    reference to the purchase requisition.
    And also refer the note 385002 for more information.....
    You can fix a source in source determination in source list thriugh ME11 not in info record.

  • Automatic PO creation from PR ME59N

    HI,
    We are creating PO's after the PR is duly approved as per the relaese strategy.
    Can we use automatic creation functionality to reduce the manula inputs and errors.
    regards,
    ab

    Hi,
    Yes you can create Automatic PO from PR Via ME59N.
    but for this you have to check Automatic PO in both purchasing View of Material Master and Vender master .
    also maintian Purchse Info Record with T code ME11 for value and tax code and
    source of Supply in ME01 and assign source of Suppy in PR and release  PR and
    go to ME59N to create automatic PO with that PR.
    But remember that you can not put additional Conditions in PO for E.g. ur fright charges and Packaging and forwarding charges via automatic PO.
    Regards,
    Pardeep Malik

  • PO creation from One Purchase Requisition

    Dear all;
    In standard SAP We can create multiple PO from A single PReq ,though the full quantity of PReq is taken first time of PO creation .Is there any restriction that After full use PReq quantity no one can use the same PReq for further PO creation.
    Thanking You;
    Regards;
    Joydeep Mukherjee

    Dear Joydeep,
    In contrast to a purchase requisition, it is possible to create more than one PO in reference to a RFQ.
    A RFQ only gives information about the price for which can be ordered from a vendor. The system does therefore not reject you from ordering again from the same vendor with the best conditions.
    Once you create a PO with reference to an RFQ, if the quantity in PR to which the RFQ is refering is exhausted,
    the user is prevented from creating further PO only with reference to the PR. But the user can create Purchase orders refering to a RFQ as long as the validity period of the RFQ is still valid.
    Regards,
    ian, Wong Loke Foong

  • Automatic project creation from Sales Document

    Hi Experts,
    Could you please advise what are the steps needed to obtain automatic creation of project from Sales Inquiry?
    Thank you in advance!!
    Aleksandra

    Hi,
    1. Create standard WBS CJ91
    2.create standard Network CN01
    3.Assign material (Finished) to standard network CN08.
    SD Config:
    1. Create sales document type.
    2. Check requirement classes and requirement types take KMPN and 212
    Material Master Settings:
    3. For material in MM02 material master ,
    4.Maintain view MRP3 Strategy group 85 Assembly processing with network/project.
    Create Sales order:
    Assign material to sales order and while saving it will trigger project.
    Muzamil

  • Newbie: How to automate link creation from a map index grid?

    We would like the user to jump to an atlas page from the index page (similar to table of contents in a book). There are more than 135 pages in the map atlas. we would like to automate the link creation.

    It might be possible to do this with a script, but it depends very much how the file was created and what the contents of it are.
    If you wish, you can send me the file to try6767 at gmail dot com and I'll have a look at it.

  • Automatically PO creation from WBS element in a project

    Hi,
    Is it possible to create Purchase Order automatically from the project that has only WBS element (no network)?
    My project has only WBS element and my client want to trigger PO creation automatically for prorements to projects.
    I appreciate your replies.
    Regards,
    Ja

    Hi Ja,
    Sorry, but you cannot create a PO automatically for a project that has only WBS elements and no network or acitivites. Since materials can only be attached to activities in a project it is mandatory to have an activity to trigger a PO automatically from the project.
    You may have to create a PO manually and then assign the WBS as account assignment.
    Regards,
    Gokul

Maybe you are looking for