Automatic PO creation through EDI

Hi experts,
Please clarify me on the setup of creating PO's thru EDI in Purchasing automatically once PR is created in the system.
My client is more or less a trading company. They buy from vendor & sell to their customer, like third party order process.
So they create Sales Order & then PReq is created through ME57 & then they create PO through ME59.
They want to create PO's automatically thru EDI as this can speed up the process so as the vendor is also looking for creating SO in their BaaN system automatically.
I have configured the EDI setup for creating PO manually, meaning when I create manual PO the idoc xml file is ready for transfer.
But I am looking for the steps so that once they create the PReq, EDI should automatically create PO in SAP & the idoc should be ready for transfer.
Please suggest if this can be done thru any BAPI or BDC programs.
Thanks in advance !
Priyadarshini

Hi Krishna,
This is for automatically creating normal PO thru PReq. Since I have setup the EDI configs for creating PO thru manual process  thru Me21N then idoc gets generated.
But my client is looking for the idocs to be generated automatically once the PReq are created thru Me57.
is there a way?
Rgds,
Pri

Similar Messages

  • Automate PO creation through EDI

    Hi experts,
    Please clarify me on the setup of creating PO's thru EDI in Purchasing automatically once PR is created in the system.
    My client is more or less a trading company. They buy from vendor & sell to their customer, like third party order process.
    So they create Sales Order & then PReq is created through ME57 & then they create PO through ME59.
    They want to create PO's automatically thru EDI as this can speed up the process so as the vendor is also looking for creating SO in their BaaN system automatically.
    I have configured the EDI setup for creating PO manually, meaning when I create manual PO the idoc xml file is ready for transfer.
    But I am looking for the steps so that once they create the PReq, EDI should automatically create PO in SAP & the idoc should be ready for transfer.
    Please suggest if this can be done thru any BAPI or BDC programs.
    Thanks in advance !
    Pri

    In the program after the pur. req. created, find user exit and check the BAPI_PO_CREATE1. Configure the ALE setting for PO IDoc creation or XML creation..
    Thanks,
    krishna

  • Automatic Delivery creation through VMS

    Dear Automotive wizards,
    We are using the Vehicle Management system for or automotive process as a distributor and retailer.
    The sales order - delivery settings are NOT for automatic delivery creation. However, in some cases, the delivery is getting created aytomatically in the background.
    Have done some introspection in thes 'some' cases and found that they pertain to our 'used care business'. Therein we are using only standard document typesand no changes have been done in their settings. But in some of those cases whenever a sales order is created from the VMS the R3 is also creating a delivery. This delivery doenst show in the vehicle history hence has to be dug out by looking in the dpcument flow for the sales order. The order / delivery setting are NOT for automatic creation.
    Do advise how to go about resolving this unnecessary 'speed breaker' in the IS AUTO highway!
    Thanks and regards,
    Tariq

    Thanks for the pointers but I have explored that earlier and the info therein shows that the delivery was created by the same ID and at the same time when the order was created.
    In fact the user is oblivious of the situation too since he/she is working in the VMS and from there they are supposed to move on to create the order after the delivery. But this delivery gets created by itself in the R3, and you would recall that the R3 docs dont get reflect and hence do not update the VMS vehicle status. thereby the vehile status is still as "sales order created" in VMS but the R3 has as "delivery created" there being a mismatch the VMS stops further processing.
    By the above you woujld have also got to know that we dont have batch processing or anything like that, pure simple and manual creation of dlivery through the VMS.
    The strangest thing is that it happens for only some of the times, and for only some of the users. I have tried comparing he roles for access but all have the same access. Would there be any settings for storage location specific in R3 for delivery creation? or likewise?
    Thanks and regards,

  • Automatic Asset creation through Project settlement

    Dear All,
    We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
    Can any body help me about the Process of Auto Asset creation through Project settlement.
    I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
    Thanks
    Abhijeet
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM

    Hi,
    There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
    Regards
    Sreekanth

  • Vendor Invoice creation through EDI (Transaction MIRO)

    Dear All,
    We want to implement Vendor Invoice creation thro EDI .(Transaction
    MIRO)
    We are not finding any suitable EDI Function Module in SAP which
    would take care of more than 20 items and run a MIRO or any
    equivalent transaction .
    Can any one please advise if any Function module exists ? We need it for
    Invoice creation with GR reference as well as without GR reference .
    Thanks
    Sanjay.

    Thanks Naren,
    I will come back after checking the fn module.
    - Sanjay

  • Automatic Billing Creation Through Sales Order Output Type

    I have requirement to create Automatic Billing document when Sales Order has been created.
    Any Suggestion.
    Regards
    Vijay Maurya

    Hi,
    it is not supported by standard SAP.in cash sales and rush orders, delivery will be created automatically because of the settings assigned in their respective sales document types.u please check VOV8 t-code.go to the details of BV(CS) and RO.there, Create Delivery field is there and shipping conditions should be 10.
    for ur requirement, u contact ur ABAPer and ask him to put one field like Create Billing Automatically in ur sales document..then it may be possible..
    hope it helps..
    regards..
    yogi..

  • Creation of Sales orders through EDI

    Hello,
    We have a problem when creating sales orders through EDI.
    We are getting IDOCs with a delay of 1 second.Before  
    creating sales orders through the posting function
    module IDOC_INPUT_ORDERS, we need to validate for
    reference Purchase order number in the IDOC. If there is
    any sales order in the database with the Purchase order
    number in the current IDOC that sales order should be 
    blocked.
    We already put a validation in the User-Exit of the
    posting function module. Because of the frequency of
    IDOCs we receive, this validation is getting failed.
    Can anybody tell me, how to process only 1 IDOC at any
    given point of time before the Posting process.
    Thanks,
    Madhusudan.

    Hi Sanjeev,
      Thank you very much for helping me out in this problem.Still I haven't got the solution.
    I tested the above mentioned configuration option by putting the Check Purchase Order Number field to 'A' in the transaction VOV8. But while creating sales orders, it is giving only information message. Is there any other way, to restrict the Duplicate PO value through configuration setup.
      can you also explain how to use Enqueue and Dequeue FMs in the inbound posting function module.
    Regards,
    Madhusudan.
    Message was edited by: Madhusudan Budati
    Message was edited by: Madhusudan Budati

  • Creation of Sales Order through EDI

    Hi
    Can anybody explain in detail the configuration steps involved in creating the sales order through EDI. If possible with screen shots.
    Points will be rewarded.
    Thanking you
    chan

    Hi Hari & Siva,
    Could you please send the document to my mail id
    [email protected]
    Thanks in advance
    MMVD

  • Scales when SO coming through EDI

    As per the requirement, I have configured the settings related to Scale based pricing for a condition type in SD.
    Since SOs are coming directly through EDI in the system, it is necessary to define a breakpoint in the EDI process: "that after reaching upto a certain quantity in the SO's first line item of a same customer, it should automatically enter the next quantity in the second line item of the same SO."
    Then only the Scale rules would be applied correctly to the sales order.
    EX: It is updating the quantity in the first line item of SO until the quantity reaches upto 1000 but from 1001 it should enter in the 2nd line item.
    How would we configure the EDI process accordingly?
    Thanks,
    Juhi

    Hi Juhi - At this moment, I wouldn't say that this is something possible through functional configuration. I've worked a lot with IDOCs and specially orders. This requirement of yours, splitting item lines based on the EDI line item quantity can be achieved through ABAP development at one stage in the IDOC posting function module.
    IDOC_INPUT_ORDERS. This function module. after having interpreted the IDOC segments and various data requirements, builds BDC data for sales order creation before calling VA01. You can probably achieve your objective by writing in a code in the customer exit EXIT_SAPLVEDA_002 that it calls everytime it builds a BDC data (header, item etc)...you can do the following:
    If OK Code is SICH, i.e the sales order BDC data has been realized, you can run through the BDC internal table records and identify line item data. If the quantity of the line item data is more than your single line limit, you can append the same records for the line item adjusting the quantities appropriately. I wish I could write in a code, but I am a functional person, so really wouldn't make sense writing in a ABAP that I don't know :).....but I think, this is what could help you in achieving the requirement. NOW, This you can limit to specific customer (again code the IF condition) or have this run for all customers. FLAW : Every order would be subjected to this process if you use it in general....
    The other way would be to have this handled in your EDI sub-system. Where they would create E1EDP01 segment and its internal segments appropriately on encountering an item with more than 1000 quantity. Wouldn't that be great !!!! That would eliminate the SAP coding requirements.
    Thanks
    Nikhil

  • Problem during automatic PO creation

    Hi,
                I have run MRP for a certain material using MD03 .Message shows MRP run successfully.Then I checked the status of this by using transactions MD04 and it shows the PR no for that material.But when I want to create automatic PO through ME59n using that PR no , message shows no suitable PR exist.I have also set the Automatic PO indicator in Material master Purchasing view.
                 What is the reason behimd it.

    Hi,
    For automatic PO creation follow the below points.
    1) Material Master purchasing view tick automatic PO check box
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.
    4) Maintain Purchase Info Record.
    5) Create a Purchase Requisition.
    6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixe only one vendor in source list.
    Did you set source determination during PR creation
    Regards,
    Biju K

  • Automatic TO creation

    Hi i need a help for following question,
    In warehouse movement type customization we can set a indicatior for automatic TO creation(background processing), but where to define this indicator and interval for this background processing like after every day or after 'xyz" hrs. Again how to see the report "RLAUTA10" (The transfer order for  transfer requirement is created by report RLAUTA10, which is scheduled as a regular job)
    Thanks in advance,
    Kamlakar G

    Hi Kamlakar,
    The program RLAUTA10 creates the TOs in the background. This is a program and you can execute through SE38. This can also be scheduled as background job with different frequencies.
    Now, You want to have different TO generation frequnecies for different movement types. This can be controlled using the 'Configure the automatic TO' indicator at followign location
    LE -> WM -> ACtivities -> Transfer -> Setup auto TO creation
    in the option 'auto TO creation' control data, create the indicator for your warehouse
    assign the indicator to movement type in 'assgin control' option.
    go to movement type and assign the indicator to movement type in 'background processing' Auto TO field.
    Now you go to SE38, execute the program 'RLAUTA10', enter warehouse and the indicator, save the variant.
    this program and variant can be used to setup the background job in SM36. while scheduling the job, you can specify the start conditions, frequency etc.
    Bottom line is, you control the background job (RLAUTA10) frequency while defining the job in SM36. you can have different variants for the same program and schedule to run at different intervals. hope this helps.

  • How to automate the creation of Function Module & Class Object (SE24)

    Experts,
    I have the requirement to automate the creation of any type of programs: ie function module (like how we normally create in SE37 together with the parameters), class object (like how we normally create in SE24 together with attribute & method), normal report (like how we did in SE38), module pool and so on.
    For example. I backuped my program into a flat file (the entire source code in txt formal or HTML) through a download program and I need to upload back this flat file into another installation of SAP.
    Does SAP provide any predefined FM to cater for the above cases or better still, does anyone know of any upload program which I can use for the above requirement.
    Thanks in advance.

    Hi Kris, I can't use the transport system as these are 2 separate SAP installation in a different place. The requirement came in the form of creation of program to be able to generate FM/Class/Report on the go.

  • PO Revisions through EDI

    Hi All,
    We used to send POs to some other Application through EDI. One of the POs has not interfaced to the third party Application through EDI. We have checked all the trading partner and supplier setups. The only issue we have found is that the PO has been revised as it has Printed_Date and print_count is present in PO_HEADERS_ALL.
    So pls suggest how can we push PO revisions through EDI.
    Version - 11.5.10.2
    Thanks!!!!

    Hi,
    If you wish to receive vendor confirmations via EDI, the IDoc interface must have been installed
    When an order acknowledgment is received via EDI, the system checks whether just the acknowledgment number is to be recorded, or also quantities and dates.
    Refer the attached link for more information on customization settings;
    http://help.sap.com/saphelp_46c/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
    If you work exclusively with order acknowledgments, only the acknowledgment number is recorded on the item detail screen. (In this case, no confirmation control key exists.)
    If you work with several confirmation categories and therefore a confirmation control key exists in the PO or scheduling agreement item, the quantities and dates shown in the order acknowledgment are recorded by the system.
    If you want to take a look at acknowledgments that have been received, choose Item ® Confirmations ® Overview from the item overview. Column C (creation indicator) contains the value 3, meaning that the acknowledgment was received via EDI.
    Br,
    Tushar

  • Urgent :Accounts Payabale Invoice automation  through EDI

    Hi All,
    Through EDI, We would like to automate <b>accounts Payable Invoice in SAP</b>.
    Kindly provide me the following details to create partner profile for this automation
    <b>1. Which Partner type ( Customer / Vendor / User / etc.,) to be used
    2.Which Partner function to be used
    3.Which Message type to be used
    4. Which Process code to be used</b>
    Apart from the above process, any other settings are to be done for accounts Payable EDI automation.
    Points will be rewarded.
    Thanks & Regards,
    A. Raja

    Hi,
    You can use invoic message type of IDOc for needed processing .& IDoc type will be either INVOIC01/INVOIC02.
    Please provide additional details of trnasctions you would like to automate that will be helpful to provide further info.
    Thanks.
    Mark points if helpful.

  • Automatic lot creation based on time Frequency

    Hi,
    For 01 inspection incoming inspection ,
    F or  certified vendors, without inspection , material is getting posted to UUS without lot creation. ( QI info record settings).
    but for this case , business requirement is to get automatic lot creation based on time like 6 months once .
    Automatic lot to be created for this certified vendor on time frequency basis. how to trigger this Lot creation based on time.
    Help.
    VV.

    Hi,
    In std SAP we dont have option of generating Automatic lot creation based on periodic basis. But we can provide some workaround soultion.
    Option 1:
    USe Source Insepction concept. Here Inspection lot will be created for every P.O. Here u can relase P.O line items in QI07 which can sceduled in Job planning on periodic basis. Use Skip inspection lot concept to skip unwanted lots. This has direct relation with Q-Info record.
    Option 2:
    U can generate automatic lot creation based on Stability study concept. Here are the following steps
    Initiate Stablility study
    Create Initial sample
    Perform intial test
    Confirm initail sample
    stability planning
    Define storage condition
    create testing schedule
    store stability sample
    define cycle start
    schedule
    complete stability study.
    Option 3:
    To get Automatic lot creation u can use BAPI QPL1_INSPECTION_LOT_CREATE . When a due date come for inspection,it created a lot of 01 / Z-01 inspection type automatically through QA01( call the program ,enter the inspection lot origin & material,vendor & save). Create Z-T code which has vendor material plant combination.
    Execute the above T-code based on Periodic basis.
    Explore above 3 options and choose best one according to ur requirements.
    Edited by: Lokesh K on Oct 12, 2010 11:27 AM

Maybe you are looking for