Automatic power off

What do I have to do to make my computer automatically power off
on "init 5" execution.
I have a system running Solaris 8. Power management is enabled in
CMOS Setup. I've tryed to install Win 95 and it powers computer off
successfully but Solaris doesn't.

Hi,
thanks for the answer, but it is not that I've asked about.<BR>
As your may know 'shutdown' is a script. So 'shutdown -i5' warns users, asks for confirmation and then calls 'init 5'. That is I wrote about first time. The problem is that when I use one of the above mentioned commands computer does NOT automatically power off.
Andrew.

Similar Messages

After update my imac to yosemite automatically power off ifself.pls help

hi friends , I updated my imac (24-inch,Early 2009) to yosemite and update was ok.after update i restart imac then it is booting and showing apple log and coming to password page then automatically power off ifself. if i start with safe mode it is working fine. can everyone help me.

Hi.
You are running into a problem that many users of the 24-inch, early 2009 iMac 9,1's have encountered (including me). The Sudden Shutdown Syndrome is the scourge of many iMacs and Mac Book Pros.
Unfortunately, I believe that the only solution is for Apple/nVidia to revisit their geForce Tesla drivers and figure out if the power management is correct.
In your case, I'd try this:
1) Boot up your computer in safe mode and log into your user account.
2) In the Finder menu, select Go > Go to Folder...
3) Type: " ~/Library/Caches" (without quotes) into the box and press return. You will be taken to the Caches folder.
4) Select all the files in the folder and move to the trash (do not trash the folder itself). At this point, just leave them in the trash...don't erase them.
5) Go back to the Finder menu, select Go > Go to Folder...
6) Type: "/Library/Caches" (without quotes) into the box and press return.
7) Do the same thing you did in 4) This time, though, you will be asked for an administrator's password.
8) Restart your computer in normal mode and attempt login.
9) If you can log to the desktop, you may delete your trash.
Hopefully this will get you into your account. If it doesn't, you may have to do a clean install of Yosemite, go back to Mavericks, or wait for an update.
Good luck!

6700: automatic power-off in car

Hello everybody.
I just got a nokia 6700 classic and installed it in a new mercedes E-class cradle (original mercedes handsfree kit).
My problem is, that the phone does not switch off automatically after e.g. 10 minutes after the ignition is turned off (power off in cardle). Instead the phone is running till the power of integrated battery is down.
Is there a chance to configure an automatic power off when no external power is connected (ignition off) ?
Thanx a lot,
Marc

Not sure, but normally the phone will not turn off when (or after some time delay..) the ignition is turned off... In fact the Cradle (car kit..) turns off when the ignition is turned off or automatically turns off after some time delay when the phone is removed from it...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Can my USB Drive be configured to power off when the iMac is powered off?

I am using a Lacie 500GB external USB drive. The drive remains powered on when my iMac is powered off. Is there any way to have the drive automatically power off?

Hello Jack
The s.o.p. for shutdown should be to eject the drive, turn it off then shutdown the iMac. The s.o.p for startup should be to startup the iMac then turn on the external HD. Many external HD manufactures do support a sleep function that allows the drive to sleep when the iMac is sleeping.
Dennis

I Cant Power Off My iPhone 4s

I Cant Power Off My iPhone 4s When I Off It It Turn On Automatically. iPhone 4s Version 8.1.2 . I Restore It But Not Fixed
SomeTime It Automatically Power Off And Turn On Again After Few Minutes

If your iOS device restarts, displays the Apple logo, or powers off while you're using it
Here are the Apple recommended steps - but you may have to bring it in to an Apple store for further hardware troubleshooting

Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.

Will an iPhone automatically turn off location services. If it goes below a certain battery power level, and so how you disable this in settings.

I am working with Georgia DOT and we have created an app to track our state vehicles using IPhone 5. My question is: will an iPhone automatically turn off location services? If it goes below a certain battery power level, and if so how do you disable this in settings.
Message was edited by: mickyel

I don't believe that this will happen, however, the entire iPhone will shut down when the iPhone reaches the auto-shutdown power level. There is no way to turn that Off other that connecting the iPhone to power.

My iphone don't have power. I am using a iPhone 5 automatic turn off. Now I press power but it don't turn on. Please help me. Thank you so much

Dear Apple,
I am using an iPhone 5. It automatic turn off after that I press power on iphone but it don't turn on power.
Please help me. Thank you so much.
<Personal Information Removed by Host>

Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. You may need to connect the device to the charger before you attempt the reset.

HT201263 I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. I tried to charge and not charging. What I should do now?

I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?

Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".

HT1766 automatic backup to icloud what does switched off mean? power off?

automatic backup says phone should be 'switched off'. does this mean short close at the top or power off?

I just reviewed HT1766 (the document where you originated your post) and even used the browser search feature but nowhere could I find the words "switched off."
The only statement I could find was: "Automatically backup your camera roll, accounts, documents, and settings when this iPhone is plugged in, locked, and connected to Wi-Fi."
The above statement does list the correct requirements for automatic backup. Where are you seeing "switched off"?

One day i was just flipping through my ipod i put it on sleep mode then next time i opened it without me doing anything it gave me an option of ''slide to power off'' i pressed cancel then it automatically went back to sleep mode it is still happening

One day i was just flipping through my ipod i put it on sleep mode then next time i opened it without me doing anything it gave me an option of ''slide to power off'' i pressed cancel then it automatically went back to sleep mode it is still happening my ipod is jailbroken and i didnt fiddle with the settings.. please help.

If it is jailbroken, we are not allowed to help you with that here. You'll need to seek out other sources of help. The jailbreaking could potentially be part of the problem, for all I know.
BTW, just a pointer... punctuation is your friend! Your post was very difficult to read without any. Many people will simply stop reading and click the "back" button when encountering something like that, which limits availability of help to you.

My iPhone will not power off. It automatically turns back on after trying to shut it off. Any Ideas?

My iPhone 5 will not power off. I hold the power button down and it lets me turn it off but then it automatically turns back on. It is as if I am just restarting it. Any ideas on how to fix it? I already had it exchanged and the replacement is now doing it.

I had this same problem about a year ago. It is most likely because debris has been caught in the cable connector. Get a cotton bud or something soft so that you don't cause any damage, and gently clean the inside of the dock connector of your phone. Do not use any liquids. Hope this helps.

Weird automatic power shut offs

Just bought and assembled a KT4V board with an AMD Athlon 1800 with 133mhz fsb, 266mhz ddr Ram, 64mb Geforce 2. However when it boots up it likes to automatically shut off at points. I don't mea restart I mea I have to turn the power switch i the back off and on and then hit the switch in the front. Beyond the fact it does not eve get past the memory check with the FSB at 133 or for that matter aything over 100 (so it says the processor is only 1150mhz on start up) even with default settings when it gets past the POST it can't seem to read my boot disc in the floppy drive(sayig it can't locate the boot record) although it registers the device at the beginning. Any suggestions to the source of the problem/problems would be much appreciated.

I experienced the same rebooting issue with the KT4V I set up for a friend recently. It turned out it was the Data Curruption Issue Described in This Thread
The 1.7 Bios fixed the issue for me - but there are reports that it severly kills HardDrive Performance, but at least the computer is stable...
Can anyone Confirm that the 1.7 bios does kill harddrive performance? The board is out of my hands now and I didnt test the performance before the new bios update anyway.

Hi my friend gave me his old Iphone 1 today and its stuck in the apple boot logo. Sometimes it automatically shuts off but about a second later it comes back on. The home button and the power button seem to not be responsive. Im hoping to restore it.. Thx

Hi my friend gave me his iphone 1 today and its stuck at the apple boot logo. Some times it automatically shuts off but about a second later is comes back on. The home button and the power button seem to not be responsive. Thanks for the help.

You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
You can make an appointment at the genius bar and have it looked at.
If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
If it's not under warranty, they will replace it for $199.
If it has been opened or tampered with, they won't touch it.

15-r007TU-Display does not turn on when it automatically turns off after closing lid.

I just purchased hp 15-r007TU, Windows 8.1 x84. I'm facing a strange problem. After all initial setup, I put the laptop on to download and install all lates Windows 8.1 patches. The display is set to tuen off automaticaaly after 5 minutes. After 5 min it did turn off as set. But then I can not turn it back on. I pressed all (except power) keys, used touch pad, closed lid and opened but it stayed off. Laptop was on and running as I could see HDD lights flickering, I could hear system sounds on pressign mute/volume keys, also I could toggle WiFi with key. I then pressed power off key to turn Windows off normally. I did turn off. I again turned it on, I could see 'hp' logo with spinning wheel and then nothing. Display is off and I don't see start screen. I have to hard reset (press power button for more than 5 seconds) then display is normal. This happens every time the display turns itself off automatically after set time or I close the lid. Only after hard reset it works normally and I see the start menu.
The power settings I use are:
1. never put system to standby after preset time. (either on battery or AC power)
2. turn display off after 5 min. (both on battery or AC power)
3. when I close lid - do nothing. (both on battery or AC power)
4. when I press power button - shut down
I am using Windows 8.1 x64 with all latest patches installed. BIOS updated to lates available. All latest drivers installed.
I have not yet set password to the system to log in.
Help would be immensly appreciate. The device is still in warrenty if it needs to be replaced.

Hello K1200LT,
Welcome to the HP Forums!
I understand the computer will not sleep when you shut down the lid. You seem to have already done most of the troubleshooting I would've suggested.
To be honest, it is either a hardware or software-related issue. To determine this, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Automatic power off

Similar Messages

Maybe you are looking for